eng
Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2383-4536
2018-04-01
4
2
75
86
10.22055/jacm.2017.22579.1136
13086
مقاله پژوهشی
Vibration Analysis of Material Size-Dependent CNTs Using Energy Equivalent Model
Mohamed A. Eltaher
mohaeltaher@gmail.com
1
Mohamed Agwa
magwa@gmail.com
2
A Kabeel
mkabeel@gmail.com
3
Mechanical Engineering Dept., Faculty of Engineering, King Abdulaziz University, P.O. Box 80204, Jeddah, Saudi Arabia | Mechanical Design & Production Dept., Faculty of Engineering, Zagazig University, P.O. Box 44519, Zagazig, Egypt
Mechanical Design & Production Dept., Faculty of Engineering, Zagazig University, P.O. Box 44519, Zagazig, Egypt
Mechanical Design & Production Dept., Faculty of Engineering, Zagazig University, P.O. Box 44519, Zagazig, Egypt
This study presents a modified continuum model to investigate the vibration behavior of single and multi-carbon nanotubes (CNTs). Two parameters are exploited to consider size dependence; one derived from the energy equivalent model and the other from the modified couple stress theory. The energy equivalent model, derived from the basis of molecular mechanics, is exploited to describe size-dependent material properties such as Young and shear moduli for both zigzag and armchair CNT structures. A modified couple stress theory is proposed to capture the microstructure size effect by assisting material length scale. A modified kinematic Timoshenko nano-beam including shear deformation and rotary inertia effects is developed. The analytical solution is shown and verified with previously published works. Moreover, parametric studies are performed to illustrate the influence of the length scale parameter, translation indices of the chiral vector, and orientation of CNTs on the vibration behaviors. The effect of the number of tube layers on the fundamental frequency of CNTs is also presented. These findings are helpful in mechanical design of high-precision measurement nano-devices manufactured from CNTs.
http://jacm.scu.ac.ir/article_13086_1b839d2c3c70ab7e45b02e2baadad04a.pdf
Energy Equivalent Model
Modified couple stress theory
Carbon nanotube
Vibration of Timoshenko Nano Beam
Analytical model
eng
Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2383-4536
2018-04-01
4
2
87
94
10.22055/jacm.2017.22435.1130
13087
مقاله پژوهشی
Thermal Analysis of Convective-Radiative Fin with Temperature-Dependent Thermal Conductivity Using Chebychev Spectral Collocation Method
George Oguntala
g.a.oguntala@bradford.ac.uk
1
Raed Abd-Alhameed
r.a.abd@bradford.ac.uk
2
Faculty of Engineering and Informatics University of Bradford, BD7 1DP West Yorkshire, UK
School of Electrical Engineering Faculty of Engineering and Informatics, University of Bradford, UK
In this paper, the Chebychev spectral collocation method is applied for the thermal analysis of convective-radiative straight fins with the temperature-dependent thermal conductivity. The developed heat transfer model was used to analyse the thermal performance, establish the optimum thermal design parameters, and also, investigate the effects of thermo-geometric parameters and thermal conductivity (nonlinear) parameters on the thermal performance of the fin. The results of this study reveal that the rate of heat transfer from the fin increases as convective, radioactive, and magnetic parameters increase. This study finds good agreements between the obtained results using the Chebychev spectral collocation method and the results obtained using the Runge-Kutta method along with shooting, homotopy perturbation, and Adomian decomposition methods.
http://jacm.scu.ac.ir/article_13087_38bdf2d4e3e42c13f21ecbbd9d55854f.pdf
Thermal analysis
Convective-radiative fin
Chebychev spectral collocation method
Temperature-dependent thermal conductivity
eng
Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2383-4536
2018-04-01
4
2
95
104
10.22055/jacm.2017.22761.1140
13088
مقاله پژوهشی
Study of Parameters Affecting Separation Bubble Size in High Speed Flows using k-ω Turbulence Model
Amjad Ali Pasha
aapasha@kau.edu.sa
1
Department of Aeronautical Engineering, King Abdul Aziz University, Saudi Arabia.
Shock waves generated at different parts of vehicle interact with the boundary layer over the surface at high Mach flows. The adverse pressure gradient across strong shock wave causes the flow to separate and peak loads are generated at separation and reattachment points. The size of separation bubble in the shock boundary layer interaction flows depends on various parameters. Reynolds-averaged Navier-Stokes equations using the standard two-equation k-ω turbulence model is used in simulations for hypersonic flows over compression corner. Different deflection angles, including q ranging from 15<sup>o </sup>to 38<sup>o</sup>, are simulated at Mach 9.22 to study its effect on separated flow. This is followed by a variation in the Reynolds number based on the boundary layer thickness, Re<sub>d</sub> from 1x10<sup>5</sup> to 4x10<sup>5</sup>. Simulations at different constant wall conditions T<sub>w</sub> of cool, adiabatic, and hot are also performed. Finally, the effect of free stream Mach numbers M<sub>∞</sub>, ranging from 5 to 9, on interaction region is studied. It is observed that an increase in parameters, q, Re<sub>d</sub>, and T<sub>w</sub> results in an increase in the separation bubble length, L<sub>s</sub>, and an increase in M<sub>∞</sub> results in the decrease in L<sub>s</sub>.
http://jacm.scu.ac.ir/article_13088_b6b38a79b1c2587cf9542beaddee2f67.pdf
High speed flows
shock/boundary-layer interaction
hypersonic flows
Shock-waves
Boundary-layer
compression corner
Computational fluid dynamics
eng
Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2383-4536
2018-04-01
4
2
105
114
10.22055/jacm.2017.22594.1137
13100
مقاله پژوهشی
Bending Response of Nanobeams Resting on Elastic Foundation
Cigdem Demir
c_demir86@yahoo.com
1
Kadir Mercan
mercankadir32@gmail.com
2
Hayi Metin Numanoglu
metin_numanoglu@akdeniz.edu.tr
3
Omer Civalek
ocivalek@akdeniz.edu.tr
4
Department of Civil Engineering, Mechanical Division, Akdeniz University Antalya, TURKIYE
Department of Civil Engineering, Mechanical Division, Akdeniz University Antalya, TURKIYE
Department of Civil Engineering, Mechanical Division, Akdeniz University Antalya, TURKIYE
Department of Civil Engineering, Mechanical Division, Akdeniz University Antalya, TURKIYE
In the present study, the finite element method is developed for the static analysis of nano-beams under the Winkler foundation and the uniform load. The small scale effect along with Eringen's nonlocal elasticity theory is taken into account. The governing equations are derived based on the minimum potential energy principle. Galerkin weighted residual method is used to obtain the finite element equations. The validity and novelty of the results for bending are tested and comparative results are presented. Deflections according to different Winkler foundation parameters and small scale parameters are tabulated and plotted. As it can be seen clearly from figures and tables, for simply-supported boundary conditions, the effect of small scale parameter is very high when the Winkler foundation parameter is smaller. On the other hand, for clamped-clamped boundary conditions, the effect of small scale parameter is higher when the Winkler foundation parameter is high. Although the effect of the small scale parameter is adverse on deflection for simply-supported and clamped-clamped boundary conditions.
http://jacm.scu.ac.ir/article_13100_ed38f1850b2c640739f9b91952cfc134.pdf
nonlocal elasticity theory
Static analysis
Weighted residual method
Winkler foundation
Euler-Bernoulli beam theory
eng
Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2383-4536
2018-04-01
4
2
115
124
10.22055/jacm.2017.23040.1147
13109
مقاله پژوهشی
Buckling Behaviors of Symmetric and Antisymmetric Functionally Graded Beams
Khalid H. Almitani
kalmettani@kau.edu.sa
1
Mechanical Engineering Dept., Faculty of Engineering, King Abdulaziz University, P.O. Box 80204, Tel: +96653908744, Jeddah, Saudi Arabia
The present study investigates buckling characteristics of both nonlinear symmetric power and sigmoid functionally graded (FG) beams. The volume fractions of metal and ceramic are assumed to be distributed through a beam thickness by the sigmoid-law distribution (S-FGM), and the symmetric power function (SP-FGM). These functions have smooth variation of properties across the boundary rather than the classical power law distribution which permits gradually variation of stresses at the surface boundary and eliminates delamination. The Voigt model is proposed to homogenize micromechanical properties and to derive the effective material properties. The Euler-Bernoulli beam theory is selected to describe Kinematic relations. A finite element model is exploited to form stiffness and buckling matrices and solve the problem of eignivalue numerically. Numerical results present the effect of material graduations and elasticity ratios on the buckling behavior of FG beams. The proposed model is helpful in stability of mechanical systems manufactured from FGMs.
http://jacm.scu.ac.ir/article_13109_e8124cfb659bf6bf4151c6c70aa9bde7.pdf
Static Stability
Buckling
Functional graded materials
Symmetric Power-Law
Sigmoid Function
Finite element
eng
Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2383-4536
2018-04-01
4
2
125
132
10.22055/jacm.2017.22700.1139
13110
مقاله پژوهشی
Finite Element Solutions of Cantilever and Fixed Actuator Beams Using Augmented Lagrangian Methods
Dongming Wei
dongming.wei@nu.edu.kz
1
Xuefeng Li
li@loyno.edu
2
Department of Mathematics, School of Science and Technology, Nazarbayev University, Astana, 010000, Kazakhstan
Department of Mathematics and Computer Science, Loyola University, New Orleans, LA 70118, USA
In this paper we develop a numerical procedure using finite element and augmented Lagrangian meth-ods that simulates electro-mechanical pull-in states of both cantilever and fixed beams in microelectromechanical systems (MEMS) switches. We devise the augmented Lagrangian methods for the well-known Euler-Bernoulli beam equation which also takes into consideration of the fringing effect of electric field to allow a smooth transi-tion of the electric field between center of a beam and edges of the beam. The numerical results obtained by the procedure are tabulated and compared with some existing results for beams in MEMS switches in literature. This procedure produces stable and accurate numerical results for simulation of these MEMS beams and can be a useful and efficient alternative for design and determining onset of pull-in for such devices.
http://jacm.scu.ac.ir/article_13110_04e7f84e34e96ab0e4562fe83534f551.pdf
Microelectromechanical switch
pull-in
Microbeam
finite element solutions
Augmented Lagrangian methods