eng
Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2383-4536
2019-10-01
5
5
816
826
10.22055/jacm.2019.27965.1446
14132
مقاله پژوهشی
Micropolar Fluid Flow Induced due to a Stretching Sheet with Heat Source/Sink and Surface Heat Flux Boundary Condition Effects
MD Shamshuddin
shammaths@gmail.com
1
Thumma Thirupathi
thirupathi.thumma@gmail.com
2
P.V. Satya Narayana
pvsatya8@yahoo.co.in
3
Department of Mathematics, Vaagdevi College of Engineering, Warangal -506005, Telangana, India
Department of Mathematics, B V Raju Institute of Technology, Medak-502313, Telangana, India
Department of Mathematics, SAS, Vellore institute of Technology (VIT University), Vellore-632014, Tamilnadu, India
Computational and mathematical models provide an important compliment to experimental studies in the development of solar energy engineering in case of electro-conductive magnetic micropolar polymers. Inspired by further understanding the complex fluid dynamics of these processes, we examine herein the non-linear steady, hydromagnetic micropolar flow with radiation and heat source/sink effects included. The transformed non-dimensional governing partial differential equations are solved with the R-K fourth order with shooting technique subjected to appropriate boundary conditions. The characteristics of the embedded parameters are obtained and presented through graphs. Velocity and microrotation of the fluid decreased with enhancing values of material parameter and suction/injection parameter. Electric field parameter has ability to enhance velocity, but temperature shows opposite behaviour. Microrotation increases for both magnetic field and surface temperature parameters.
http://jacm.scu.ac.ir/article_14132_2100de4d345f33eb8bcb048e84b12bdf.pdf
Micropolar Fluid
Heat source/sink
stretching Sheet
Partial slip
Surface heat flux boundary conditions
eng
Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2383-4536
2019-10-01
5
5
827
839
10.22055/jacm.2019.27677.1428
14140
مقاله پژوهشی
An Analytical and Semi-analytical Study of the Oscillating Flow of Generalized Burgers’ Fluid through a Circular Porous Medium
Abdul Rauf
abdul.rauf@aumc.edu.pk
1
Department of Computer Science & Engineering, Air University, Abdali Road, Khan Center, Multan, 60000, Pakistan
Unsteady oscillatory flow of generalized Burgers’ fluid in a circular channel tube in the porous medium is investigated under the influence of time-dependent trapezoidal pressure gradient given by an infinite Fourier series. An exact analytical expression for the solution for the fluid velocity and the shear stress are recovered by using the similarity arguments together with the integral transforms. The solution is verified with a semi-analytical solution obtained by employing the Stehfest's method. Using the software Mathcad, numerical calculations have been carried out, and results are presented in graphical illustrations in order to analyze the effects of various fluid parameters on the fluid motion. As expected, with the increase in the permeability of the porous medium, the drag force decreases, which results in an increase in the velocity profile for all kinds of fluid models (a generalized Burgers’ fluid, a Burgers’ fluid, a Maxwell fluid, and an Oldroyd-B fluid). Moreover, it has been observed that the material constants of the generalized Burgers’ fluid, as well as the Burgers’ fluid, are other important factors that enhance the flow velocity performance of the fluid. The velocity-time variation for the generalized Burgers’ fluid, the Oldroyd-B fluid, and the Newtonian fluid is similar to the trapezoidal waveform, whereas it is different for the Burgers’ and Maxwell fluid.
http://jacm.scu.ac.ir/article_14140_2083ca6a7ef16c7bf87c93964044bc71.pdf
Oscillating motion
Porous medium
Trapezoidal pressure gradient
Generalized Burgers’ fluid
Analytical and semi-analytical solution
eng
Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2383-4536
2019-10-01
5
5
840
848
10.22055/jacm.2019.28313.1476
14130
مقاله پژوهشی
Irreversibility Analysis of MHD Buoyancy-Driven Variable Viscosity Liquid Film along an Inclined Heated Plate Convective Cooling
Adetayo Eegunjobi
samdet1@yahoo.com
1
O.D. Makinde
makinded@gmail.com
2
Mathematics Department, Namibia University of Science and Technology, Windhoek, 9000, Namibia
Faculty of Military Science, Stellenbosch University, Private Bag X2, Saldanha 7395, South Africa
Analysis of intrinsic irreversibility and heat transfer in a buoyancy-driven changeable viscosity liquid along an incline heated wall with convective cooling taking into consideration the heated isothermal and isoflux wall is investigated. By Newton’s law of cooling, we assumed the free surface exchange heat with environment and fluid viscosity is exponentially dependent on temperature. Appropriate governing model equations for momentum and energy balance with volumetric entropy generation expression are obtained and then transformed using dimensionless variables to form set of nonlinear boundary valued problem. Using shooting method with Runge-Kutta-Fehlberg integration scheme, the model is numerically tackled. Pertinent results for the fluid velocity, temperature, skin friction, Nusselt number, entropy generation rate and Bejan number are obtained and discussed.
http://jacm.scu.ac.ir/article_14130_832e8760fbf9f2c87999ad2346369898.pdf
Inclined plane
MHD liquid film
Isothermal wall
Isoflux wall
Convective cooling
Entropy generation
eng
Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2383-4536
2019-10-01
5
5
849
860
10.22055/jacm.2019.27800.1435
14156
مقاله پژوهشی
A Paired Quasi-linearization on Magnetohydrodynamic Flow and Heat Transfer of Casson Nanofluid with Hall Effects
Mumukshu Trivedi
mumukshu.tphd15@sot.pdpu.ac.in
1
O. Otegbeye
muyiwabowen@yahoo.com
2
Md. S. Ansari
shariffuddin@gmail.com
3
Sandile S. Motsa
sandilemotsa@gmail.com
4
Department of Mathematics, School of Technology, Pandit Deendayal Petroleum University, Gandhinagar- 382007, India
School of Mathematics, Statistics and Computer Science, University of KwaZulu-Natal, Pietermaritzburg, South Africa
Department of Mathematics, School of Technology, Pandit Deendayal Petroleum University, Gandhinagar- 382007, India
School of Mathematics, Statistics and Computer Science, University of KwaZulu-Natal, Pietermaritzburg, South Africa | Department of Mathematics, University of Swaziland, Swaziland
Present study explores the effect of Hall current, non-linear radiation, irregular heat source/sink on magnetohydrodynamic flow of Casson nanofluid past a nonlinear stretching sheet. <strong>V</strong>iscous and Joule dissipation are incorporated in the energy equation. An accurate numerical solution of highly nonlinear partial differential equations, describing the flow, heat and mass transfer, by a new Spectral Paired Quasi-linearization method is obtained and effect of various physical parameters such as hall current parameter, radiation parameter, Eckert number, Prandtl number, Lewis number, thermophoresis parameter and Brownian motion parameter on the thermal, hydro-magnetic and concentration boundary layers are observed. The analysis shows that variation of different thermo-magnetic parameter induces substantial impression on the behaviour of temperature and nanoparticle distribution. Thermal boundary layer is greatly affected by conduction radiation parameter.
http://jacm.scu.ac.ir/article_14156_19e6bebc20e6f3d8b99f53b6905dc8f7.pdf
Magnetic field
Casson Nanofluid
Mixed convection
Non-uniform heat source/sink
Paired quasi-linearization method (PQLM)
eng
Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2383-4536
2019-10-01
5
5
861
874
10.22055/jacm.2019.28043.1452
14293
مقاله پژوهشی
Numerical Analysis of the Effect of External Circumferential Elliptical Cracks in Transition Thickness Zone of Pressurized Pipes Using XFEM
Houda Salmi
houda.salmi111@gmail.com
1
Khalid El Had
elhad_khalid@hotmail.com
2
Hanan El Bhilat
hanan.el.bhilat@gmail.com
3
Abdelilah Hachim
abdelilah.hachim@gmail.com
4
National Higher School of Mechanics, ENSEM, Laboratory of Control and Mechanical Characterization of Materials and Structures, Casablanca, Morocco
Institute of Maritims Studies, Laboratory of Materials and Structures, Casablanca, Morocco
National Higher School of Mechanics, ENSEM, Laboratory of Control and Mechanical Characterization of Materials and Structures, Casablanca, Morocco
Institute of Maritims Studies, Laboratory of Materials and Structures, Casablanca, Morocco
The present work investigates the effect of the elliptical three-dimensional (3D) cracks on a pipe with thickness transition, considering internal pressure. Level sets were defined using the extended finite element method (XFEM), the stress intensity factors (SIFs) of 3D cracks were investigated and compared between straight pipes and pipes with thickness transition. The results show that the XFEM is an effective tool for modeling crack in pipes. A pressurized pipe with thickness transition is more sensitive to the feature compared to the straight pipe. Parameters of the transition zone have an influence on stress intensity factors. Quantification of the SIFs associated with cracks in the transition zone of pipes with thicknesses is performed.
http://jacm.scu.ac.ir/article_14293_38e4142b239c2df9d17c5e0f0120ccf9.pdf
Pressurized equipment
Pipe with thickness transition
Three-dimensional crack
XFEM
SIF
Level set
eng
Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2383-4536
2019-10-01
5
5
875
899
10.22055/jacm.2019.27297.1397
14263
مقاله پژوهشی
On Bending Response of Doubly Curved Laminated Composite Shells Using Hybrid Refined Models
J.C. Monge
joao.monge@utec.edu.pe
1
J.L. Mantari
jmantaril@uni.edu.pe
2
J. Yarasca
jorgeyarasca@gmail.com
3
R.A. Arciniega
roman.arciniega@upc.pe
4
Faculty of Mechanical Engineering, National University of Engineering, Av. Tupac Amaru 210, Rimac, Lima, Peru
Faculty of Mechanical Engineering, National University of Engineering, Av. Tupac Amaru 210, Rimac, Lima, Peru
Faculty of Mechanical Engineering, National University of Engineering, Av. Tupac Amaru 210, Rimac, Lima, Peru
Department of Civil Engineering, Universidad Peruana de Ciencias Aplicadas (UPC), Surco, Lima, Peru
This paper presents a static analysis of laminated composite doubly-curved shells using refined kinematic models with polynomial and non-polynomial functions recently introduced in the literature. To be specific, Maclaurin, trigonometric, exponential and zig-zag functions are employed. The employed refined models are based on the equivalent single layer theories. A simply supported shell is subjected to different mechanical loads, specifically: bi-sinusoidal, uniform, patch, hydrostatic pressure and point load. The governing equations are derived from the Principle of Virtual displacement and solved via Navier-Type closed form solutions. The results are compared with results from Layer-wise solutions and different higher order shear deformation theories available. It is shown that refined models with non-polynomial terms are able to accurately predict the through-the-thickness displacement and stress distributions maintaining less computational effort compared to a Layer-wise models.
http://jacm.scu.ac.ir/article_14263_464f93f56f736b678cf0b8c59414f8db.pdf
Shell
Laminated composite
Carrera Unified Formulation (CUF)
Doubly-curvature
eng
Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2383-4536
2019-10-01
5
5
900
917
10.22055/jacm.2019.27857.1439
14245
مقاله پژوهشی
Vibration and Buckling Analysis of Functionally Graded Flexoelectric Smart Beam
Milad Esmaeili
milad90@hotmail.com
1
Yaghoub Tadi Beni
tadi@eng.sku.ac.ir
2
Mechanical Engineering Department, Faculty of Engineering, Shahrekord University, Shahrekord, Iran
Mechanical Engineering Department, Faculty of Engineering, Shahrekord University, Shahrekord, Iran
In this paper, the buckling and vibration behaviour of functionally graded flexoelectric nanobeam is examined. The vibration and buckling formulations of functionally graded nanobeam are developed by using a new theory that’s presented exclusively for flexoelecteric nano-materials. So by considering Von-Karman strain and forming enthalpy equation based on displacement, polarization and electric potential, electromechanical coupling equations are developed base on Hamilton’ principle. By considering boundary condition of simply support and clamped-clamped and also Euler-Bernoulli beam model, pre-buckling, buckling and the vibration behavior of functionally graded nanobeam affected by flexoelectric will be investigated.
http://jacm.scu.ac.ir/article_14245_2a68e1edd7373713fc3fc03f435522f2.pdf
Flexoelectric effect
Functionally graded nanobeam
Piezoelectric effect
Size-dependent
Euler-Bernoulli beam model
eng
Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2383-4536
2019-10-01
5
5
918
925
10.22055/jacm.2019.28331.1477
14288
مقاله پژوهشی
Asymptotic Approximations of the Solution for a Traveling String under Boundary Damping
Rajab A. Malookani
rajab_ali31@yahoo.com
1
Sanaullah Dehraj
sanaullahdehraj@gmail.com
2
Sajad H. Sandilo
s.h.sandilo@quest.edu.pk
3
Department of Mathematics and Statistics, Faculty of Science, Quaid-e-Awam University of Engineering, Science and Technology, Nawabshah, 67480, Sindh, Pakistan
Department of Mathematics and Statistics, Faculty of Science, Quaid-e-Awam University of Engineering, Science and Technology, Nawabshah, 67480, Sindh, Pakistan
Department of Mathematics and Statistics, Faculty of Science, Quaid-e-Awam University of Engineering, Science and Technology, Nawabshah, 67480, Sindh, Pakistan
Transversal vibrations of an axially moving string under boundary damping are investigated. Mathematically, it represents a homogenous linear partial differential equation subject to nonhomogeneous boundary conditions. The string is moving with a relatively (low) constant speed, which is considered to be positive. The string is kept fixed at the first end, while the other end is tied with the spring-dashpot system. The asymptotic approximations for the solution of the equations are obtained by application of two time-scale perturbation technique and the characteristic coordinates method. The vertical displacement of the moving system under boundary damping is computed by using specific initial conditions. It is shown that how the introduced damping at the boundary may affect the vertical displacement of the axially moving system.
http://jacm.scu.ac.ir/article_14288_a94764af63010312a7e43c6d36a1c4cd.pdf
Axially moving string
Boundary damping
Two time-scale perturbation
Characteristic coordinates
eng
Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2383-4536
2019-10-01
5
5
926
934
10.22055/jacm.2019.27062.1413
14167
مقاله پژوهشی
Love Wave Propagation in a Fiber-reinforced Layer with Corrugated Boundaries Overlying Heterogeneous Half-space
Anand Mandi
anand.mandi@gmail.com
1
Santimoy Kundu
kundu_santi@yahoo.co.in
2
Prasenjit Pati
prasenjitpati@gmail.com
3
Prakash Chandra Pal
pcpal_ism@yahoo.co.in
4
Department of Applied Mathematics, Indian Institute of Technology (Indian School of Mines), India
Department of Applied Mathematics, Indian Institute of Technology (Indian School of Mines), India
Department of Applied Mathematics, Indian Institute of Technology (Indian School of Mines), India
Department of Applied Mathematics, Indian Institute of Technology (Indian School of Mines), India
Love-type wave generation in a fiber-reinforced medium placed over an inhomogeneous orthotropic half-space is analysed. The upper and lower boundary surfaces of the fiber reinforced medium are periodically corrugated. Inhomogeneity of half-space is caused by variable density and variable shear modules. Displacement components for layer and half-space are derived by applying separable variable technique. Dispersion relation for Love wave is obtained in closed form. Numerical calculations for the achieved dispersion equation are performed. In the numerical examples, the main attention is focused on the effect of corrugation investigation, reinforced parameters and inhomogeneity on the relations between wave number and phase velocity.
http://jacm.scu.ac.ir/article_14167_56b66a82400cb36d1ef1078574066da0.pdf
Love wave
Fiber-reinforced
Inhomogeneous
Corrugation
eng
Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2383-4536
2019-10-01
5
5
935
950
10.22055/jacm.2019.28296.1474
14262
مقاله پژوهشی
Analysis of the Coupled Nonlinear Vibration of a Two-Mass System
Akuro Big-Alabo
akuro.big-alabo@uniport.edu.ng
1
Chinwuba Ossia
ossiacv@otiuniport.org
2
Department of Mechanical Engineering, Faculty of Engineering, University of Port Harcourt, Port Harcourt, Rivers State, Nigeria
Department of Mechanical Engineering, Faculty of Engineering, University of Port Harcourt, Port Harcourt, Rivers State, Nigeria
This paper presents a fixed-end two-mass system (TMS) with end constraints that permits uncoupled solutions for different masses. The coupled nonlinear models for the present fixed-end TMS were solved using the continuous piecewise linearization method (CPLM) and detailed investigation on the effect of mass-ratio on the TMS response was conducted. The investigations showed that increased mass-ratio leads to decreased oscillation frequency and an asymptotic response was obtained at very large mass-ratios. Theoretical solutions to determine the asymptotic response were derived. Also, it was observed that distinct responses can be obtained for the same mass-ratio depending on the mass combination in the TMS. The present fixed-end TMS and the analyses presented give a broader understanding of fixed-end TMS.
http://jacm.scu.ac.ir/article_14262_4a21619e07808d81ab4e4516f8d80dd2.pdf
Continuous piecewise linearization method
Two-mass system
Cubic Duffing oscillator
Coupled nonlinear vibration
eng
Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2383-4536
2019-10-01
5
5
951
963
10.22055/jacm.2019.27998.1450
14148
مقاله پژوهشی
Heat and Mass Transfer Analysis on MHD Peristaltic Prandtl Fluid Model through a Tapered Channel with Thermal Radiation
Ravi Rajesh
ravirajeshmaths@gmail.com
1
Y. Rajasekhara Gowd
2
Research Scholar (Reg No: PP.MAT. 0013), Department of Mathematics, Rayalaseema University, Kurnool, Andhra Pradesh, India
Associate Professor, Humanities and Basic Sciences Department, G.Pulla Reddy Engineering College, Kurnool, Andhra Pradesh, India
This paper deals with a theoretical investigation of heat and mass transfer with thermal radiation analysis on hydromagnetic peristaltic Prandtl fluid model with porous medium through an asymmetric tapered vertical channel under the influence of gravity field. Analytical results are found for the velocity, pressure gradient, pressure rise, frictional force, temperature and concentration. The influence of varied governing parameters is discussed and illustrated diagrammatically through a set of figures. It can be seen that the axial velocity enhances with an increase in gravity parameter. It is observed that the temperature of the fluid reduces within the tapered asymmetric vertical channel by an increase in thermal radiation parameter. Blood flow in concentration profile increases with an increase in thermal radiation parameter. It is worth mentioning that the rate of pumping rises in all the four regions, i.e. retrograde pumping region, peristaltic pumping region, free pumping region and an augmented region with an increase in Prandtl fluid parameter.
http://jacm.scu.ac.ir/article_14148_6505cc1d884af6c0780801157aab81fb.pdf
Thermal radiation
MHD
Porous medium
Temperature
Mass transfer
Gravity filed
eng
Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2383-4536
2019-10-01
5
5
964
975
10.22055/jacm.2019.27938.1443
14164
مقاله پژوهشی
Numerical and Analytical Approach for Film Condensation on Different Forms of Surfaces
Ammar Kazemi Jouybari
a.jouybari@gmail.com
1
Arash Mirabdolah Lavasani
arashlavasani@iauctb.ac.ir
2
Department of Mechanical Engineering, Islamic Azad University, Central Tehran Branch, Tehran, Iran
Department of Mechanical Engineering, Islamic Azad University, Central Tehran Branch, Tehran, Iran
This paper tries to achieve a solution for problems that concern condensation around a flat plate, circular and elliptical tube in by numerical and analytical methods. Also, it calculates entropy production rates. At first, a problem was solved with mesh dynamic and rational assumptions; next it was compared with the numerical solution that the result had acceptable errors. An additional supporting relation is applied based on the characteristic of the condensation phenomenon for condensing elements. As it is shown here, due to higher rates of heat transfer for elliptical tubes, they have more entropy production rates, in comparison to circular ones. Findings showed that the two methods were efficient. Furthermore, analytical methods can be used to optimize the problem and reduce the entropy production rate.
http://jacm.scu.ac.ir/article_14164_2802ab0e97b34884a3153fbf6d189d66.pdf
Entropy rate
Analytical solution
Numerical solution
Condensation
eng
Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2383-4536
2019-10-01
5
5
976
988
10.22055/jacm.2019.27997.1449
14184
مقاله پژوهشی
MHD Flow and Heat Transfer of SiC-TiO2/DO Hybrid Nanofluid due to a Permeable Spinning Disk by a Novel Algorithm
Behnam Fallah
sdsaee@yahoo.com
1
Saeed Dinarvand
saeed_dinarvand@yahoo.com
2
Mohammad Eftekhari Yazdi
mo.ef.ya@gmail.com
3
Mohammadreza Nademi Rostami
mohammad.n.rostami@gmail.com
4
Ioan Pop
ioan.pop144@gmail.com
5
Department of Mechanical Engineering, Islamic Azad University, Central Tehran Branch, Tehran, Iran
Department of Mechanical Engineering, Islamic Azad University, Central Tehran Branch, Tehran, Iran
Department of Mechanical Engineering, Islamic Azad University, Central Tehran Branch, Tehran, Iran
Department of Mechanical Engineering, Islamic Azad University, Central Tehran Branch, Tehran, Iran
Department of Applied Mathematics, Babeş-Bolyai University, 400084 Cluj-Napoca, Romania
This study intends to semi-analytically investigate the steady 3D boundary layer flow of a SiC-TiO<sub>2</sub>/DO hybrid nanofluid over a porous spinning disk subject to a constant vertical magnetic field. Here, the novel attitude to single-phase hybrid nanofluid model corresponds to considering nanoparticles and base fluid masses to compute solid equivalent volume fraction, solid equivalent density, and also solid equivalent specific heat at constant pressure. The basic PDEs are transformed into dimensionless ODEs using Von Kármán similarity transformations, which are then solved numerically using bvp4c function. Results indicate that mass suction and magnetic field effects diminish all hydrodynamic and thermal boundary layer thicknesses. Finally, a significant report is presented to investigate quantities of engineering interest due to governing parameters’ effects.
http://jacm.scu.ac.ir/article_14184_159e90ac08a3a34bc30bed92b9d36e7b.pdf
3D boundary layer flow
Single-phase hybrid nanofluid
Spinning disk
Semi-analytical modeling
Diathermic oil
eng
Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2383-4536
2019-10-01
5
5
989
997
10.22055/jacm.2019.28640.1496
14247
مقاله پژوهشی
Finite Integral Transform Based Solution of Second Grade Fluid Flow between Two Parallel Plates
Jaideep Dutta
jdutta.mech@gmail.com
1
Balaram Kundu
bkundu@mech.net.in
2
Research Scholar, Department of Mechanical Engineering, Jadavpur University, Kolkata, 700032, India
Professor, Department of Mechanical Engineering, Jadavpur University, Kolkata, 700032, India
The importance of the slip flow over the no-slip condition is widely accepted in microscopic scaled domains with the direct impact on microfluidic and nanofluidic systems. The popular Navier Stoke’s (N-S) flow model is largely utilized with the slip flow phenomenon. In the present study, the finite integral transform scheme along with the shift of variables is implemented to solve the equation of motion of second grade fluid having third-order mixed partial derivative term. The velocity over the flow regime is studied with both the slip and no-slip boundary conditions for Newtonian and non-Newtonian characteristics by considering the generalized Couette flow. The impact of the pressure gradient and flow time on the velocity is investigated analytically. The output of the present research reveals that due to the slip flow velocity randomly varies at the vicinity of wall surface and such nature hasn’t been found for the no-slip condition. The validation of the present work was done by comparison with the published work and the numerical values, and it shows well verified.
http://jacm.scu.ac.ir/article_14247_d46b155e5911502585c1ae4be135add6.pdf
Second grade fluid
exact solution
Couette flow
Slip condition
Non-Newtonian fluid
eng
Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2383-4536
2019-10-01
5
5
998
1022
10.22055/jacm.2019.28743.1502
14445
مقاله پژوهشی
Beam & Shell Models for Composite Straight or Curved Bridge Decks with Intermediate Diaphragms & Assessment of Design Specifications
Ioannis N. Tsiptsis
ioannis.tsiptsis@aalto.fi
1
Olga E. Sapountzaki
saolga@student.ethz.ch
2
Department of Civil Engineering, Aalto University, Rakentajanaukio 4, Espoo, 02150, Finland
Department of Civil Engineering, National Technical University of Athens, Zografou Campus, Athens, 15780, Athens, Greece
In this research effort, the generalized warping and distortional problem of straight or horizontally curved composite beams of arbitrary cross section, loading and boundary conditions is presented. An inclined plane of curvature is considered. Additionally, the stiffness of diaphragmatic plates has been introduced in the formulation in order to compare with the case where rigid diaphragms are assumed. Isogeometric tools (NURBS) are employed in order to obtain the results for the 1D formulation and 3D shell models are developed in FEM commercial software for composite cross sections with diaphragms. The number of intermediate diaphragms according to bridges design specifications is compared to the analyzed diaphragmatic arrangements in order to assess the overall structural behavior of bridges decks. For this purpose, examples of curved beam models with open or closed cross sections and various arrangements of diaphragms have been studied.
http://jacm.scu.ac.ir/article_14445_537baa18346c5f657c8b8c7ffad277e6.pdf
Higher-Order-Beam-Theories
Finite element method-FEM
Distortion
Warping
Guidelines
Diaphragms