ORIGINAL_ARTICLE
Vibration Analysis of Material Size-Dependent CNTs Using Energy Equivalent Model
This study presents a modified continuum model to investigate the vibration behavior of single and multi-carbon nanotubes (CNTs). Two parameters are exploited to consider size dependence; one derived from the energy equivalent model and the other from the modified couple stress theory. The energy equivalent model, derived from the basis of molecular mechanics, is exploited to describe size-dependent material properties such as Young and shear moduli for both zigzag and armchair CNT structures. A modified couple stress theory is proposed to capture the microstructure size effect by assisting material length scale. A modified kinematic Timoshenko nano-beam including shear deformation and rotary inertia effects is developed. The analytical solution is shown and verified with previously published works. Moreover, parametric studies are performed to illustrate the influence of the length scale parameter, translation indices of the chiral vector, and orientation of CNTs on the vibration behaviors. The effect of the number of tube layers on the fundamental frequency of CNTs is also presented. These findings are helpful in mechanical design of high-precision measurement nano-devices manufactured from CNTs.
http://jacm.scu.ac.ir/article_13086_1b839d2c3c70ab7e45b02e2baadad04a.pdf
2018-04-01T11:23:20
2018-06-20T11:23:20
75
86
10.22055/jacm.2017.22579.1136
Energy Equivalent Model
Modified couple stress theory
Carbon Nanotube
Vibration of Timoshenko Nano Beam
Analytical model
Mohamed A.
Eltaher
mohaeltaher@gmail.com
true
1
Mechanical Engineering Dept., Faculty of Engineering, King Abdulaziz University,
P.O. Box 80204, Jeddah, Saudi Arabia | Mechanical Design & Production Dept., Faculty of Engineering, Zagazig University, P.O. Box 44519, Zagazig, Egypt
Mechanical Engineering Dept., Faculty of Engineering, King Abdulaziz University,
P.O. Box 80204, Jeddah, Saudi Arabia | Mechanical Design & Production Dept., Faculty of Engineering, Zagazig University, P.O. Box 44519, Zagazig, Egypt
Mechanical Engineering Dept., Faculty of Engineering, King Abdulaziz University,
P.O. Box 80204, Jeddah, Saudi Arabia | Mechanical Design & Production Dept., Faculty of Engineering, Zagazig University, P.O. Box 44519, Zagazig, Egypt
LEAD_AUTHOR
Mohamed
Agwa
magwa@gmail.com
true
2
Mechanical Design & Production Dept., Faculty of Engineering, Zagazig University,
P.O. Box 44519, Zagazig, Egypt
Mechanical Design & Production Dept., Faculty of Engineering, Zagazig University,
P.O. Box 44519, Zagazig, Egypt
Mechanical Design & Production Dept., Faculty of Engineering, Zagazig University,
P.O. Box 44519, Zagazig, Egypt
AUTHOR
A
Kabeel
mkabeel@gmail.com
true
3
Mechanical Design & Production Dept., Faculty of Engineering, Zagazig University,
P.O. Box 44519, Zagazig, Egypt
Mechanical Design & Production Dept., Faculty of Engineering, Zagazig University,
P.O. Box 44519, Zagazig, Egypt
Mechanical Design & Production Dept., Faculty of Engineering, Zagazig University,
P.O. Box 44519, Zagazig, Egypt
AUTHOR
[1] Iijima, S., Helical microtubules of graphitic carbon, Nature, 354(6348), 1991, pp. 56-58.
1
[2] Tu, Z.C., Ou-Yang, Z.C., Single-walled and multiwalled carbon nanotubes viewed as elastic tubes with the effective Young’s moduli dependent on layer number, Physical Review B, 65(23), 2002, pp. 233407.
2
[3] Haile, J.M., Molecular dynamics simulation: Elementary methods, Computers in Physics, 7(6), 1993, pp. 625-625.
3
[4] Chen Y., Lee J.D., Eskandarian. A., Atomistic viewpoint of the applicability of microcontinuum theories, International Journal of Solids and Structures, 41, 2004, pp. 2085-2097.
4
[5] Eltaher, M.A., Emam, S.A., Mahmoud, F.F., Free vibration analysis of functionally graded size-dependent nanobeams, Applied Mathematics and Computation, 218(14), 2012, pp. 7406-7420.
5
[6] Eringen, A.C., Nonlocal polar elastic continua, International Journal of Engineering Science, 10, 1972, pp. 1–16.
6
[7] Eringen A.C., On differential equations of nonlocal elasticity and solutions of screw dislocation and surface waves, Journal of Applied Physics, 54, 1983, pp. 4703–4710.
7
[8] Eringen, A.C., Nonlocal continuum field theories, New York: Springer-Verlag, 2002.
8
[9] Mindlin, R.D., Influence of couple-stresses on stress concentrations, Experimental Mechanics, 3(1), 1963, pp. 1-7.
9
[10] Toupin, R.A., Elastic materials with couple-stresses, Archive for Rational Mechanics and Analysis, 11(1), 1962, pp. 385-414.
10
[11] Mindlin, R.D., Eshel, N.N., On first strain-gradient theories in linear elasticity, International Journal of Solids and Structures, 4(1), 1968, pp. 109-124.
11
[12] Yang, F.A., Chong, A.C.M., Lam, D.C.C., Tong, P., Couple stress based strain gradient theory for elasticity, International Journal of Solids and Structures, 39(10), 2002, pp. 2731-2743.
12
[13] Lam, D.C.C., Yang, F., Chong, A.C.M., Wang, J., Tong, P., Experiments and theory in strain gradient elasticity, Journal of the Mechanics and Physics of Solids, 51(8), 2003, pp. 1477-1508.
13
[14] Wu, Y., Zhang, X., Leung, A.Y.T., Zhong, W., An energy-equivalent model on studying the mechanical properties of single-walled carbon nanotubes, Thin-Walled Structures, 44(6), 2006, pp. 667-676.
14
[15] Alizada, A.N., Sofiyev, A.H., Modified Young’s moduli of nano-materials taking into account the scale effects and vacancies, Meccanica, 46, 2011, pp. 915–920.
15
[16] Rafiee, R., Moghadam, R.M., On the modeling of carbon nanotubes: a critical review, Composites Part B: Engineering, 56, 2014, pp. 435-449.
16
[17] Sakharova, N.A., Pereira, A.F.G., Antunes, J.M., Brett, C.M.A., Fernandes, J.V., Mechanical characterization of single-walled carbon nanotubes: Numerical simulation study, Composites Part B: Engineering, 75, 2015, pp. 73-85.
17
[18] Tserpes, K.I., Papanikos, P., Finite element modeling of single-walled carbon nanotubes, Composites Part B: Engineering, 36(5), 2005, pp. 468-477.
18
[19] Shokrieh, M.M., Rafiee, R., Prediction of Young’s modulus of graphene sheets and carbon nanotubes using nanoscale continuum mechanics approach, Materials & Design, 31(2), 2010, pp. 790-795.
19
[20] Shodja, H.M., Delfani, M.R., A novel nonlinear constitutive relation for graphene and its consequence for developing closed-form expressions for Young’s modulus and critical buckling strain of single-walled carbon nanotubes, Acta mechanica, 222(1-2), 2011, pp. 91-101.
20
[21] Bogacz, R., Noga, S., Free transverse vibration analysis of a toothed gear, Archive of Applied Mechanics, 82(9), 2012, pp. 1159-1168.
21
[22] Ghavamian, A., Rahmandoust, M., Öchsner, A., On the determination of the shear modulus of carbon nanotubes, Composites Part B: Engineering, 44(1), 2013, pp. 52-59.
22
[23] Akgoz, B., Civalek, O. Buckling analysis of linearly tapered micro-columns based on strain gradient elasticity, Structural Engineering and Mechanics, 48(2), 2013, pp. 195-205.
23
[24] Feng, C., Liew, K. M., He, P., Wu, A., Predicting mechanical properties of carbon nanosprings based on molecular mechanics simulation, Composite Structures, 114, 2014, pp. 41-50.
24
[25] Pine, P., Yaish, Y.E., Adler, J., Vibrational analysis of thermal oscillations of single-walled carbon nanotubes under axial strain, Physical Review B, 89(11), 2014, pp. 115405.
25
[26] Rappé, A.K., Casewit, C.J., Colwell, K.S., Goddard Iii, W.A., Skiff, W.M., A full periodic table force field for molecular mechanics and molecular dynamics simulations, Journal of the American Chemical Society, 114(25), 1992, pp. 10024-10035..
26
[27] Farrokhabadi, A., Abadian, N., Rach, R., Abadyan, M., Theoretical modeling of the Casimir force-induced instability in freestanding nanowires with circular cross-section, Physica E: Low-dimensional Systems and Nanostructures, 63, 2014, pp. 67-80.
27
[28] Brischetto, S., A continuum elastic three-dimensional model for natural frequencies of single-walled carbon nanotubes, Composites Part B: Engineering, 61, 2014, pp. 222-228.
28
[29] Kiani, K., Vibration analysis of two orthogonal slender single-walled carbon nanotubes with a new insight into continuum-based modeling of van der Waals forces, Composites Part B: Engineering, 73, 2015, pp. 72-81.
29
[30] Stölken, J.S., Evans, A.G., A microbend test method for measuring the plasticity length scale, Acta Materialia, 46(14), 1998, pp. 5109-5115.
30
[31] Mindlin, R.D., Tiersten, H.F., Effects of couple-stresses in linear elasticity, Archive for Rational Mechanics and Analysis, 11(1), 1962, pp. 415-448.
31
[32] Ma, H.M., Gao, X.L., Reddy, J.N., A microstructure-dependent Timoshenko beam model based on a modified couple stress theory, Journal of the Mechanics and Physics of Solids, 56(12), 2008, pp. 3379-3391.
32
[33] Fu, Y., Zhang, J., Modeling and analysis of microtubules based on a modified couple stress theory, Physica E: Low-dimensional Systems and Nanostructures, 42(5), 2010, pp. 1741-1745.
33
[34] Ke, L.L., Wang, Y.S., Flow-induced vibration and instability of embedded double-walled carbon nanotubes based on a modified couple stress theory, Physica E: Low-dimensional Systems and Nanostructures, 43(5), 2011, pp. 1031-1039.
34
[35] Ghayesh, M.H., Farokhi, H., Amabili, M., Nonlinear dynamics of a microscale beam based on the modified couple stress theory, Composites Part B: Engineering, 50, 2013, pp. 318-324.
35
[36] Tounsi, A., Benguediab, S., Adda, B., Semmah, A., Zidour, M., Nonlocal effects on thermal buckling properties of double-walled carbon nanotubes, Advances in Nano Research, 1(1), 2013, pp. 1-11.
36
[37] Benguediab, S., Tounsi, A., Zidour, M., Semmah, A., Chirality and scale effects on mechanical buckling properties of zigzag double-walled carbon nanotubes, Composites Part B: Engineering, 57, 2014, pp. 21-24.
37
[38] Semmah, A., Tounsi, A., Zidour, M., Heireche, H., Naceri, M., Effect of the chirality on critical buckling temperature of zigzag single-walled carbon nanotubes using the nonlocal continuum theory, Fullerenes, Nanotubes and Carbon Nanostructures, 23(6), 2015, pp. 518-522.
38
[39] Bazehhour, B.G., Mousavi, S.M., Farshidianfar, A., Free vibration of high-speed rotating Timoshenko shaft with various boundary conditions: effect of centrifugally induced axial force, Archive of Applied Mechanics, 84(12), 2014, pp. 1691-1700.
39
[40] Besseghier, A., Heireche, H., Bousahla, A.A., Tounsi, A., Benzair, A., Nonlinear vibration properties of a zigzag single-walled carbon nanotube embedded in a polymer matrix, Advances in Nano Research, 3(1), 2015, pp. 29-37.
40
[41] Akgöz, B., Civalek, Ö., Bending analysis of FG microbeams resting on Winkler elastic foundation via strain gradient elasticity, Composite Structures, 134, 2015, pp. 294-301.
41
[42] Eltaher, M.A., Agwa, M.A., Mahmoud, F.F., Nanobeam sensor for measuring a zeptogram mass, International Journal of Mechanics and Materials in Design, 12(2), 2016, pp. 211-221.
42
[43] Fakhrabadi, M.M.S., Prediction of small-scale effects on nonlinear dynamic behaviors of carbon nanotube-based nano-resonators using consistent couple stress theory, Composites Part B: Engineering, 88, 2016, pp. 26-35.
43
[44] Akgöz, B., Civalek, Ö., Bending analysis of embedded carbon nanotubes resting on an elastic foundation using strain gradient theory, Acta Astronautica, 119, 2016, pp. 1-12..
44
[45] Agwa, M.A., & Eltaher, M.A., Vibration of a carbyne nanomechanical mass sensor with surface effect, Applied Physics A, 122(4), 2016, pp. 1-8.
45
[46] Eltaher, M.A., Khater, M.E., Emam, S.A., A review on nonlocal elastic models for bending, buckling, vibrations, and wave propagation of nanoscale beams, Applied Mathematical Modelling, 40, 2016, pp. 4109–4128.
46
[47] Eltaher, M.A., El-Borgi S., Reddy J.N., Nonlinear Analysis of Size-dependent and Material-Dependent Nonlocal CNTs, Composite Structure, 153, 2016, pp. 902-913.
47
[48] Civalek, Ö., Demir, C., A simple mathematical model of microtubules surrounded by an elastic matrix by nonlocal finite element method, Applied Mathematics and Computation, 289, 2016, pp. 335-352.
48
[49] Hamed M.A., Eltaher M.A., Sadoun, A.M., Almitani K.H., Free vibration of Symmetric and Sigmoid Functionally Graded Nanobeams, Applied Physics A: Materials Science and Processing, 122(9), 2016, pp. 625-625.
49
[50] Hosseini, S.A.H., Rahmani, O., Thermomechanical vibration of curved functionally graded nanobeam based on nonlocal elasticity, Journal of Thermal Stresses, 39(10), 2016, pp. 1252-1267.
50
[51] Keivani, M., Mardaneh, M., Koochi, A., Rezaei, M., Abadyan, M., On the dynamic instability of nanowire-fabricated electromechanical actuators in the Casimir regime: Coupled effects of surface energy and size dependency, Physica E: Low-dimensional Systems and Nanostructures, 76, 2016, pp. 60-69.
51
[52] Sedighi, H.M., Size-dependent dynamic pull-in instability of vibrating electrically actuated microbeams based on the strain gradient elasticity theory, Acta Astronautica, 95, 2014, pp. 111-123.
52
[53] Keivani, M., Khorsandi, J., Mokhtari, J., Kanani, A., Abadian, N., Abadyan, M., Pull-in instability of paddle-type and double-sided NEMS sensors under the accelerating force, Acta Astronautica, 119, 2016, pp. 196-206.
53
[54] Keivani, M., Mokhtari, J., Abadian, N., Abbasi, M., Koochi, A., Abadyan, M., Analysis of U-shaped NEMS in the Presence of Electrostatic, Casimir, and Centrifugal Forces Using Consistent Couple Stress Theory, Iranian Journal of Science and Technology, Transactions A: Science, 2017, doi: 10.1007/s40995-017-0151-y.
54
[55] Wang, K.F., Zeng, S., Wang, B.L., Large amplitude free vibration of electrically actuated nanobeams with surface energy and thermal effects, International Journal of Mechanical Sciences, 131–132, 2017, pp. 227-233.
55
[56] Yamabe, T., Recent development of carbon nanotube, Synthetic Metals, 70(1), 1995, pp. 1511-1518
56
[57] Baghdadi, H., Tounsi, A., Zidour, M., Benzair, A., Thermal Effect on Vibration Characteristics of Armchair and Zigzag Single-Walled Carbon Nanotubes Using Nonlocal Parabolic Beam Theory, Fullerenes, Nanotubes and Carbon Nanostructures, 23(3), 2015, pp. 266-272.
57
[58] Eltaher, M.A., Agwa, M.A., Analysis of Size-dependent Mechanical Properties of CNTs Mass Sensor Using Energy Equivalent Model, Sensor and Actuator A: Physical, 246, 2016, pp. 9-17.
58
[59] Park, S.K., Gao, X.L., Bernoulli–Euler beam model based on a modified couple stress theory, Journal of Micromechanics and Microengineering, 16(11), 2006, pp. 2355.
59
ORIGINAL_ARTICLE
Thermal Analysis of Convective-Radiative Fin with Temperature-Dependent Thermal Conductivity Using Chebychev Spectral Collocation Method
In this paper, the Chebychev spectral collocation method is applied for the thermal analysis of convective-radiative straight fins with the temperature-dependent thermal conductivity. The developed heat transfer model was used to analyse the thermal performance, establish the optimum thermal design parameters, and also, investigate the effects of thermo-geometric parameters and thermal conductivity (nonlinear) parameters on the thermal performance of the fin. The results of this study reveal that the rate of heat transfer from the fin increases as convective, radioactive, and magnetic parameters increase. This study finds good agreements between the obtained results using the Chebychev spectral collocation method and the results obtained using the Runge-Kutta method along with shooting, homotopy perturbation, and Adomian decomposition methods.
http://jacm.scu.ac.ir/article_13087_38bdf2d4e3e42c13f21ecbbd9d55854f.pdf
2018-04-01T11:23:20
2018-06-20T11:23:20
87
94
10.22055/jacm.2017.22435.1130
Thermal Analysis
Convective-radiative fin
Chebychev spectral collocation method
Temperature-dependent thermal conductivity
George
Oguntala
g.a.oguntala@bradford.ac.uk
true
1
Faculty of Engineering and Informatics
University of Bradford, BD7 1DP
West Yorkshire, UK
Faculty of Engineering and Informatics
University of Bradford, BD7 1DP
West Yorkshire, UK
Faculty of Engineering and Informatics
University of Bradford, BD7 1DP
West Yorkshire, UK
LEAD_AUTHOR
Raed
Abd-Alhameed
r.a.abd@bradford.ac.uk
true
2
School of Electrical Engineering
Faculty of Engineering and Informatics, University of Bradford, UK
School of Electrical Engineering
Faculty of Engineering and Informatics, University of Bradford, UK
School of Electrical Engineering
Faculty of Engineering and Informatics, University of Bradford, UK
AUTHOR
[1] Aziz, A., Enamul-Huq, S.M., Perturbation solution for convecting fin with temperature dependent thermal conductivity, Journal of Heat Transfer, 97(2), 1973, pp. 300–301.
1
[2] Aziz, A., Perturbation solution for convecting fin with internal heat generation and temperature dependent thermal conductivity, International Journal of Heat and Mass Transfer, 20(11), 1977, pp. 1253-1255.
2
[3] Campo, A., Spaulding, R.J., Coupling of the methods of successive approximations and undetermined coefficients for the prediction of the thermal behaviour of uniform circumferential fins, Heat and Mass Transfer, 34(6), 1999, pp. 461–468.
3
[4] Chiu, C.H., Chen, C.K., A decomposition method for solving the convective longitudinal fins with variable thermal conductivity, International Journal of Heat and Mass Transfer, 45(10),2002, pp. 2067-2075.
4
[5] Arslanturk, A., A decomposition method for fin efficiency of convective straight fin with temperature dependent thermal conductivity, International Communications in Heat and Mass Transfer, 32(6), 2005, pp. 831–841.
5
[6] Ganji, D.D., The Application of He’s Homotopy Perturbation Method to Nonlinear Equations Arising in Heat Transfer, Physics Letter A,355(4-5), 2006, pp. 337–341.
6
[7] He, J.H., Homotopy Perturbation Technique, Computer Methods in Applied Mechanics and Engineering, 178, 1999, pp. 257–262.
7
[8] Chowdhury, M.S.H., Hashim, I., Analytical Solutions to Heat Transfer Equations by Homotopy-Perturbation Method Revisited, Physical Letters A, 372(8), 2008, pp. 1240-1243.
8
[9] Rajabi, A., Homotopy Perturbation Method for Fin Efficiency of Convective Straight Fins with Temperature-dependent Thermal Conductivity, Physics Letters A, 364(1), 2007, pp.33-37.
9
[10] Inc, M., Application of Homotopy Analysis Method for Fin Efficiency of Convective Straight Fin with Temperature Dependent Thermal Conductivity, Mathematics and Computers Simulation, 79(2), 2008, pp. 189-200.
10
[11] Coskun, S.B., Atay, M.T., Analysis of Convective Straight and Radial Fins with Temperature-dependent Thermal Conductivity using Variational Iteration Method with Comparison with respect to Finite Element Analysis, Mathematical Problem in Engineering, 2007, Article ID 42072, 15p.
11
[12] Languri, E.M., Ganji, D.D., Jamshidi, N., Variational Iteration and Homotopy Perturbation Methods for Fin Efficiency of Convective Straight Fins with Temperature-dependent Thermal Conductivity, 5th WSEAS International Conference on Fluid Mechanics (Fluids 08), Acapulco, Mexico January 25-27, 2008.
12
[13] Sobamowo, M.G., Thermal analysis of longitudinal fin with temperature-dependent properties and internal heat generation using Galerkin’s method of weighted residual, Applied Thermal Engineering, 99, 2016, pp. 1316–1330.
13
[14] Atay, M.T., Coskun, S.B., Comparative Analysis of Power-Law Fin-Type Problems Using Variational Iteration Method and Finite Element Method, Mathematical Problems in Engineering, 2008, Article ID 635231, 9p.
14
[15] Domairry, G., Fazeli, M., Homotopy analysis method to determine the fin efficiency of convective straight fins with temperature dependent thermal conductivity, Communication in Nonlinear Science and Numerical Simulation, 14(2), 2009, pp. 489-499.
15
[16] Hosseini, K., Daneshian, B., Amanifard, N., Ansari, R., Homotopy Analysis Method for a Fin with Temperature Dependent Internal Heat Generation and Thermal Conductivity, International Journal of Nonlinear Science, 14(2), 2012, pp. 201-210.
16
[17] Joneidi, A.A., Ganji, D.D., Babaelahi, M., Differential Transformation Method to determine fin efficiency of convective straight fins with temperature dependent thermal conductivity, International Communication in Heat and Mass Transfer, 36, 2009, pp. 757-762.
17
[18] Moradi, A., Ahmadikia, H., Analytical Solution for different profiles of fin with temperature dependent thermal conductivity, Mathematical Problem in Engineering, 2010, Article ID 568263, 15p.
18
[19] Moradi, A., Ahmadikia, H., Investigation of effect thermal conductivity on straight fin performance with DTM, International Journal of Engineering and Applied Sciences, 1, 2011, pp. 42 -54
19
[20] Mosayebidorcheh, S., Ganji D.D., Farzinpoor, M., Approximate Solution of the nonlinear heat transfer equation of a fin with the power-law temperature-dependent thermal conductivity and heat transfer coefficient, Propulsion and Power Research, 3(1), 2014, pp. 41-47.
20
[21] Ghasemi, S.E., Hatami, M. Ganji, D.D., Thermal analysis of convective fin with temperature-dependent thermal conductivity and heat generation, Cases Studies in Thermal Engineering, 4, 2014, pp. 1-8.
21
[22] Sadri, S., Raveshi, M.R., Amiri, S., Efficiency analysis of straight fin with variable heat transfer coefficient and thermal conductivity, Journal of Mechanical Science and Technology, 26(4), 2012, pp. 1283-1290.
22
[23] Ganji, D.D., Dogonchi, A.S., Analytical investigation of convective heat transfer of a longitudinal fin with temperature-dependent thermal conductivity, heat transfer coefficient and heat generation, International Journal of Physical Sciences, 9(21), 2013, pp. 466-474.
23
[24] Fernandez, A., On some approximate methods for nonlinear models, Applied Mathematical Computation, 215, 2009, pp. 168-74.
24
[25] Gottlieb, D., Orszag, S.A., Numerical analysis of spectral methods: Theory and Applications, Regional Conference Series in Applied Mathematics, 28, 1977, pp. 1–168.
25
[26] Canuto, C., Hussaini, M.Y., Quarteroni, A., Zang, T.A., Spectral Methods in Fluid Dynamics, Springer-Verlag, New York, 1988.
26
[27] Peyret, R., Spectral Methods for Incompressible Viscous Flow, Springer Verlag, New York, 2002.
27
[28] Belgacem, F.B., Grundmann, M., Approximation of the wave and electromagnetic diffusion equations by spectral methods, SIAM Journal on Scientiﬁc Computing, 20(1), 1998, pp. 13–32.
28
[29] Shan, X.W., Montgomery, D., Chen, H.D., Nonlinear magnetohydrodynamics by Galerkin-method computation, Physical Review A, 44(10), 1991, pp. 6800–6818.
29
[30] Shan, X.W., Magnetohydrodynamic stabilization through rotation, Physical Review Letters, 73(12), 1994, pp. 1624–1627.
30
[31] Wang, J.P., Fundamental problems in spectral methods and ﬁnite spectral method, Sinica Acta Aerodynamica, 19(2), 2001, pp. 161–171.
31
[32] Elbarbary, E.M.E., El-kady, M., Chebyshev ﬁnite difference approximation for the boundary value problems, Applied Mathematics and Computation, 139, 2003, pp. 513–523.
32
[33] Huang, Z.J., Zhu, Z.J., Chebyshev spectral collocation method for solution of Burgers’ equation and laminar natural convection in two-dimensional cavities, Bachelor Thesis, University of Science and Technology of China, Hefei, 2009.
33
[34] Eldabe, N.T., Ouaf, M.E.M., Chebyshev ﬁnite difference method for heat and mass transfer in a hydromagnetic ﬂow of a micropolar ﬂuid past a stretching surface with Ohmic heating and viscous dissipation, Applied Mathematics and Computation, 177, 2006, pp. 561–571.
34
[35] Khater, A.H., Temsah, R.S., Hassan, M.M., A Chebyshev spectral collocation method for solving Burgers'-type equations, Journal of Computational and Applied Mathematics, 222, 2008, pp. 333–350.
35
[36] Canuto, C., Hussaini, M.Y., Quarteroni, A., Zang, T.A., Spectral Methods in Fluid Dynamics, Springer, New York, 1988.
36
[37] Doha, E.H., Bhrawy, A.H., Efficient spectral-Galerkin algorithms for direct solution of fourth-order differential equations using Jacobi polynomials, Applied Numerical Mathematics, 58, 2008, pp. 1224–1244.
37
[38] Doha, E.H., Bhrawy, A.H., Jacobi spectral Galerkin method for the integrated forms of fourth-order elliptic differential equations, Numerical Methods in Partial Differential Equations, 25, 2009, pp. 712–739.
38
[39] Doha, E.H., Bhrawy, A.H., Hafez, R.M., A Jacobi–Jacobi dual-Petrov–Galerkin method for third- and fifth-order differential equations, Mathematical and Computer Modelling, 53, 2011, pp. 1820–1832.
39
[40] Doha, E.H., Bhrawy, A.H., Ezzeldeen, S.S., Efficient Chebyshev spectral methods for solving multi-term fractional orders differential equations, Applied Mathematical Modelling, 35(12), 2011, pp. 5662-5672.
40
ORIGINAL_ARTICLE
Study of Parameters Affecting Separation Bubble Size in High Speed Flows using k-ω Turbulence Model
Shock waves generated at different parts of vehicle interact with the boundary layer over the surface at high Mach flows. The adverse pressure gradient across strong shock wave causes the flow to separate and peak loads are generated at separation and reattachment points. The size of separation bubble in the shock boundary layer interaction flows depends on various parameters. Reynolds-averaged Navier-Stokes equations using the standard two-equation k-ω turbulence model is used in simulations for hypersonic flows over compression corner. Different deflection angles, including q ranging from 15o to 38o, are simulated at Mach 9.22 to study its effect on separated flow. This is followed by a variation in the Reynolds number based on the boundary layer thickness, Red from 1x105 to 4x105. Simulations at different constant wall conditions Tw of cool, adiabatic, and hot are also performed. Finally, the effect of free stream Mach numbers M∞, ranging from 5 to 9, on interaction region is studied. It is observed that an increase in parameters, q, Red, and Tw results in an increase in the separation bubble length, Ls, and an increase in M∞ results in the decrease in Ls.
http://jacm.scu.ac.ir/article_13088_b6b38a79b1c2587cf9542beaddee2f67.pdf
2018-04-01T11:23:20
2018-06-20T11:23:20
95
104
10.22055/jacm.2017.22761.1140
High speed flows
shock/boundary-layer interaction
hypersonic flows
Shock-waves
Boundary-layer
compression corner
Computational fluid dynamics
Amjad Ali
Pasha
aapasha@kau.edu.sa
true
1
Department of Aeronautical Engineering,
King Abdul Aziz University, Saudi Arabia.
Department of Aeronautical Engineering,
King Abdul Aziz University, Saudi Arabia.
Department of Aeronautical Engineering,
King Abdul Aziz University, Saudi Arabia.
LEAD_AUTHOR
[1] Babinsky, H., Harvey, J. K., Shock Wave-Boundary Layer Interactions, Cambridge University Press, 2011.
1
[2] Bose, D., Brown, J. L., Prabhu, D. K., Gnoffo, P., Johnston, C. O., Hollis, B., Uncertainty Assessment of Hypersonic Aerothermodynamics Prediction Capability, Journal of Spacecraft and Rockets, 50(1), 2013, pp. 12-18.
2
[3] DeBonis, J. R., Oberkampf, W. L., Wolf, R. T., Orkwis, P. D., Turner, M. G., Babinsky, H., and Benek, J. A., Assessment of Computational Fluid Dynamics and Experimental Data for Shock Boundary-Layer Interactions, AIAA Journal, 50(4), 2012, pp. 891-903.
3
[4] Sinha, K., Mahesh, K., Candler, G. V., Modeling Shock-Unsteadiness in Shock/Turbulence Interaction, Physics of Fluids, 15(8), 2003, pp. 2290-2297.
4
[5] Verma, S. B., Stark, R., Haid, O., Relation Between Shock Unsteadiness and the Origin of Side-Loads Inside a Thrust Optimized Parabolic Rocket Nozzle, Aerospace Science and Technology, 10(6), 2006, pp. 474-483.
5
[6] Dussauge, J. P., Dupont, P., Debieve, J. F., Unsteadiness in Shock Wave Boundary layer Interactions with Separation, Progress in Aerospace Sciences, 10(2), 2006, pp. 85-91.
6
[7] Estruch, D., Lawson, N. J., MacManus, D. G., Garry, K. P., Stollery, J. L., Measurement of Shock Wave Unsteadiness using a High-Speed Schlieren System and Digital Image Processing, Review of Scientific Instruments, 79(12), 2008, pp. 126108.
7
[8] Clemens, N. T., Narayanaswamy, V., Low-Frequency Unsteadiness of Shock Wave/Turbulent Boundary Layer Interactions, Annual Review of Fluid Mechanics, 46, 2014, pp. 469-492.
8
[9] Bertin, J. J., Hypersonic Aerothermodynamics, AIAA Education Series, AIAA, Washington, DC, 1994.
9
[10] Anderson, J. D., Hypersonic and High Temperature Gas Dynamics, AIAA, 2006.
10
[11] Holden, M. S., Wadhams, T. P., A Database of Aerothermal Measurements in Hypersonic. Flow in “Building Block” Experiments for CFD Validation, 41st Aerospace Sciences Meeting and Exhibit, 6-9 July 2003, Reno, Nevada, 2003.
11
[12] Marvin, J. G., Brown, J. L., Gnoffo, P. A., Experimental Database with Baseline CFD Solutions: 2-D and Axisymmetric Hypersonic Shock-Wave/Turbulent-Boundary-Layer Interactions, NASA/TM–2013–216604, 2013.
12
[13] Narayanaswamy, V., Raja, L. L., Clemens, N. T., Control of Unsteadiness of a Shock Wave/Turbulent Boundary Layer Interaction by using a Pulsed-Plasma-Jet Actuator, Physics of Fluids, 24(7), 2012, p. 076101.
13
[14] Delery, J., Marvin, J. G., Shock-Wave Boundary Layer Interactions, edited by E. Reshotko, AGARD No. 280, 1986.
14
[15] Settles, G. S., Dodson, L. J., Supersonic and Hypersonic Shock/Boundary Layer Interaction Data Base, AIAA Journal, 32(7), 1994, pp. 1337-1383.
15
[16] Arnal, D., Delery, J. M., Laminar-Turbulent Transition And Shock-Wave/Boundary-Layer Interaction, RTO-EN-AVT-116, Chapter 4, 2004, p. 46.
16
[17] Ostlund, J., Klingmann, B. M., Supersonic Flow Separation with Application to Rocket Engine Nozzles, AppliedMechanics Reviews, 58, 2005, pp. 143-177.
17
[18] John, B., Kulkarni, V., Effect of Leading Edge Bluntness on the Interaction of Ramp Induced Shock Wave with Laminar Boundary Layer at Hypersonic Speed, Computers and Fluids, 96, 2014, pp. 177-190.
18
[19] Sriram , R., Srinath, L., Manoj, K., Devaraj, K., Jagadeesh, G., On the Length Scales of Hypersonic Shock-Induced Large Separation Bubbles Near Leading Edges, Journal of Fluid Mechanics, 806, 2016, pp. 304-355.
19
[20] Neuenhahm T, Olivier H., Influence of the Wall Temperature and Entropy Layer Effects on Double Wedge Shock Boundary Layer Interactions, 14th AIAA/AHI Space Planes and Hypersonic Systems and Technologies Conference, International Space Planes and Hypersonic Systems and Technologies Conferences, 2006-8136, 2006.
20
[21] Brown, L., Fischer, C., Boyce, R. R., Reinartz, B., Olivier, H., Computational Studies of the Effect of Wall Temperature on Hypersonic Shock-Induced Boundary Layer Separation, Shock Waves, In: Hannemann K., Seiler F. (eds) Shock Waves. Springer, Berlin, Heidelberg, 2009.
21
[22] Xiaodong, Z., Zhenghong, G., A Numerical Research on a Compressibility-correlated Langtry’s Transition Model for Double Wedge Boundary Layer Flows, Chinese Journal of Aeronautics, 24, 2011, pp. 249-257.
22
[23] Yang Z., Large-Eddy Simulation: Past, Present and the Future, Chinese Journal of Aeronautics, 28(1), 2015, pp. 11-24.
23
[24] Knight, D. D., Degrez, G., Shock Wave Turbulent Boundary Layer Interactions In High Mach Number Flows a Critical Survey of Current Numerical Prediction Capabilities, AGARD Advisory Report, 319(2), 1998, pp. 1-35.
24
[25] Knight, D., Yan, H., Panaras, A. G., Zheltovodov, A., Advances in CFD Prediction of Shock Wave Turbulent Boundary Layer Interactions, Progress in Aerospace Sciences, 39(2-3), 2003, pp. 121-184.
25
[26] Roy, C. J., Blottner, F. G., Review and Assessment of Turbulence Models for Hypersonic Flows, Progress in Aerospace Sciences, 42(7-8), 2006, pp. 469-530.
26
[27] Guohua, T. U., Xiaogang, D., Assessment of Two Turbulence Models and Some Compressibility Corrections for Hypersonic Compression Corners by High-Order Difference Schemes, Chinese Journal of Aeronautics, 25, 2012, pp. 25-32.
27
[28] Rui, Z., Chao, Y., Jian, Y., Xinliang, L., Improvement of Baldwin-Lomax Turbulence Model for Supersonic Complex Flows, Chinese Journal of Aeronautics, 26(3), 2013, pp. 529-534.
28
[29] Li, M., Lipeng, L. , Jian, F., Qiuhui, W., A Study on Turbulence Transportation and Modification of Spalart-Allmaras Model for Shock-Wave/Turbulent Boundary Layer Interaction Flow, Chinese Journal of Aeronautics, 27(2), 2014, pp. 200-209.
29
[30] Georgiadis, N. J., Yoder, D. A., Vyas, M. A., Engblom, W. A., Status Of Turbulence Modeling For Hypersonic Propulsion Flow paths, Theoretical and Computational Fluid Dynamics, 28(3), 2014, pp. 295-318.
30
[31] Panaras, A. G., Turbulence Modeling of Flows with Extensive Cross Flow Separation, Aerospace, 2, 2015, pp. 461-481.
31
[32] Gaitonde, D. V., Progress in Shock Wave/Boundary Layer Interactions, Progress in Aerospace Sciences, 72, 2015, pp. 80-99.
32
[33] Elfstrom, G. M., Turbulent Hypersonic Flow at a Wedge- Compression Corner, Journal of Fluid Mechanics, 53(1), 1972, pp. 113-127.
33
[34] Wilcox, D. C., Turbulence Modeling for CFD, La Canada CA: 2nd edition, DCW Industries, 2000.
34
[35] Sinha, K., Candler, G. V., Convergence Improvement of Two Equation Turbulence Model Calculations, 29th AIAA, Fluid Dynamics Conference, Fluid Dynamics and Co-located Conferences, Minneapolis, Albuquerque, U.S.A., 1998.
35
[36] Wilcox, D. C., Formulation of the k-ω Turbulence Model Revisited, AIAA Journal, 46(11), 2008, pp. 2823-2838.
36
[37] MacCormack, R. W., Candler, G.V., The Solution of Navier-Stokes Equations Using Gauss-Siedal Line Relaxation, Computers and Fluids, 17(1), 1989, pp. 135-150.
37
[38] Wright, M. J., Candler, G. V., Bose, D., Data-Parallel Line Relaxation Method for the Navier-Stokes Equations, AIAA Journal, 36(9), 1998, pp. 1603-1609.
38
[39] Sinha, K., Mahesh, K., Candler, G. V., Modeling the Effect of Shock-Unsteadiness in Shock Turbulent Boundary-Layer Interactions, AIAA Journal, 43(3), 2005, pp. 586-594.
39
[40] Pasha, A. A., Sinha, K., Shock-Unsteadiness Model Applied to Oblique Shock Wave/Turbulent Boundary-Layer Interaction, International Journal of Computational Fluid Dynamics, 22(8), 2008, pp. 569-582.
40
[41] Pasha, A.A., Sinha, K., Shock Unsteadiness Model Applied to Hypersonic Shock Wave Turbulent Boundary-Layer Interactions, Journal of Propulsion and Power, 28(1), 2012, pp. 46-60.
41
[42] Menter, F. R., Two-Equation Eddy-Viscosity Turbulence Models for Engineering Applications, AIAA Journal, 32(8), 1994, pp. 1598-1605.
42
ORIGINAL_ARTICLE
Bending Response of Nanobeams Resting on Elastic Foundation
In the present study, the finite element method is developed for the static analysis of nano-beams under the Winkler foundation and the uniform load. The small scale effect along with Eringen's nonlocal elasticity theory is taken into account. The governing equations are derived based on the minimum potential energy principle. Galerkin weighted residual method is used to obtain the finite element equations. The validity and novelty of the results for bending are tested and comparative results are presented. Deflections according to different Winkler foundation parameters and small scale parameters are tabulated and plotted. As it can be seen clearly from figures and tables, for simply-supported boundary conditions, the effect of small scale parameter is very high when the Winkler foundation parameter is smaller. On the other hand, for clamped-clamped boundary conditions, the effect of small scale parameter is higher when the Winkler foundation parameter is high. Although the effect of the small scale parameter is adverse on deflection for simply-supported and clamped-clamped boundary conditions.
http://jacm.scu.ac.ir/article_13100_ed38f1850b2c640739f9b91952cfc134.pdf
2018-04-01T11:23:20
2018-06-20T11:23:20
105
114
10.22055/jacm.2017.22594.1137
nonlocal elasticity theory
Static Analysis
Weighted residual method
Winkler foundation
Euler-Bernoulli beam theory
Cigdem
Demir
c_demir86@yahoo.com
true
1
Department of Civil Engineering, Mechanical Division, Akdeniz University
Antalya, TURKIYE
Department of Civil Engineering, Mechanical Division, Akdeniz University
Antalya, TURKIYE
Department of Civil Engineering, Mechanical Division, Akdeniz University
Antalya, TURKIYE
AUTHOR
Kadir
Mercan
mercankadir32@gmail.com
true
2
Department of Civil Engineering, Mechanical Division, Akdeniz University
Antalya, TURKIYE
Department of Civil Engineering, Mechanical Division, Akdeniz University
Antalya, TURKIYE
Department of Civil Engineering, Mechanical Division, Akdeniz University
Antalya, TURKIYE
AUTHOR
Hayi Metin
Numanoglu
metin_numanoglu@akdeniz.edu.tr
true
3
Department of Civil Engineering, Mechanical Division, Akdeniz University
Antalya, TURKIYE
Department of Civil Engineering, Mechanical Division, Akdeniz University
Antalya, TURKIYE
Department of Civil Engineering, Mechanical Division, Akdeniz University
Antalya, TURKIYE
AUTHOR
Omer
Civalek
ocivalek@akdeniz.edu.tr
true
4
Department of Civil Engineering, Mechanical Division, Akdeniz University
Antalya, TURKIYE
Department of Civil Engineering, Mechanical Division, Akdeniz University
Antalya, TURKIYE
Department of Civil Engineering, Mechanical Division, Akdeniz University
Antalya, TURKIYE
LEAD_AUTHOR
[1] Eringen, A.C., Linear Theory of Nonlocal Elasticity and Dispersion of Plane-Waves, International Journal of Engineering Science, 10(5), 1972, pp. 425-435.
1
[2] Eringen, A.C., On differential equations of nonlocal elasticity and solutions of screw dislocation and surface waves, Journal of Applied Physics, 54(9), 1983, pp. 4703-4710.
2
[3] Wang, L.F., Hu, H.Y., Flexural wave propagation in single-walled carbon nanotubes, Physical Review B, 71(19), 2005, 11p.
3
[4] Duan, W.H., Wang, C.M., Zhang, Y.Y., Calibration of nonlocal scaling effect parameter for free vibration of carbon nanotubes by molecular dynamics, Journal of Applied Physics, 101(2), 2007, 024305.
4
[5] Aydogdu, M., Longitudinal wave propagation in nanorods using a general nonlocal unimodal rod theory and calibration of nonlocal parameter with lattice dynamics, International Journal of Engineering Science, 56, 2012, pp. 17-28.
5
[6] Wang, C.M., Zhang, Z., Challamel, N., Duan, W.H., Calibration of Eringen's small length scale coefficient for initially stressed vibrating nonlocal Euler beams based on microstructured beam model, Journal of Physics D-Applied Physics, 46(34), 2013, 345501.
6
[7] Gao, Y., Lei, F.-M., Small scale effects on the mechanical behaviors of protein microtubules based on the nonlocal elasticity theory, Biochemical and Biophysical Research Communications, 387(3), 2009, pp. 467-471.
7
[8] Peddieson, J., Buchanan, G.R., McNitt, R.P., Application of nonlocal continuum models to nanotechnology, International Journal of Engineering Science, 41(3), 2003, pp. 305-312.
8
[9] Akgöz, B., Civalek, Ö., Bending analysis of FG microbeams resting on Winkler elastic foundation via strain gradient elasticity, Composite Structures, 134, 2015, pp. 294-301.
9
[10] Akgoz, B., Civalek, O., Bending analysis of embedded carbon nanotubes resting on an elastic foundation using strain gradient theory, Acta Astronautica, 119, 2016, pp. 1-12.
10
[11] Demir, Ç., Civalek, Ö., Nonlocal deflection of microtubules under point load, International Journal of Engineering and Applied Sciences, 7(3), 2015, pp. 33-39.
11
[12] Wang, Q., Liew, K.M., Application of nonlocal continuum mechanics to static analysis of micro-and nano-structures, Physics Letters A, 363(3), 2007, pp. 236-242.
12
[13] Reddy, J.N., Pang, S.D., Nonlocal continuum theories of beams for the analysis of carbon nanotubes, Journal of Applied Physics, 103(2), 2008, 023511.
13
[14] Reddy, J.N., Nonlocal theories for bending, buckling and vibration of beams, International Journal of Engineering Science, 45(2), (2007) 288-307.
14
[15] Fan, C.Y., Zhao, M.H., Zhu, Y.J., Liu, H.T., Zhang, T.Y., Analysis of micro/nanobridge test based on nonlocal elasticity, International Journal of Solids and Structures, 49(15-16), 2012, pp. 2168-2176.
15
[16] De Rosa, M.A., Franciosi, C., A simple approach to detect the nonlocal effects in the static analysis of Euler-Bernoulli and Timoshenko beams, Mechanics Research Communications, 48, 2013, pp. 66-69.
16
[17] Janghorban, M., Two different types of differential quadrature methods for static analysis of microbeams based on nonlocal thermal elasticity theory in thermal environment, Archive of Applied Mechanics, 82(5), 2012, pp. 669-675.
17
[18] Demir, C., Civalek, Ö., Tek katmanlı grafen tabakaların eğilme ve titreşimi, Mühendislik Bilimleri ve Tasarım Dergisi, 4(3), 2016, pp. 173-183.
18
[19] Farajpour, A., Shahidi, A.R., Mohammadi, M., Mahzoon, M., Buckling of orthotropic micro/nanoscale plates under linearly varying in-plane load via nonlocal continuum mechanics, Composite Structures, 94(5), 2012, pp. 1605-1615.
19
[20] Liu, C., Ke, L.-L., Yang, J., Kitipornchai, S., Wang, Y.-S., Buckling and post-buckling analyses of size-dependent piezoelectric nanoplates, Theoretical and Applied Mechanics Letters, 6(6), 2016, pp. 253-267.
20
[21] Liu, C., Ke, L.-L., Yang, J., Kitipornchai, S., Wang, Y.-S., Nonlinear vibration of piezoelectric nanoplates using nonlocal Mindlin plate theory, Mechanics of Advanced Materials and Structures, 2016, doi: 10.1080/15376494.2016.1149648.
21
[22] Asemi, S.R., Mohammadi, M., Farajpour, A., A study on the nonlinear stability of orthotropic single-layered graphene sheet based on nonlocal elasticity theory, Latin American Journal of Solids and Structures, 11(9), 2014, pp. 1541-1564.
22
[23] Malekzadeh, P., Farajpour, A., Axisymmetric free and forced vibrations of initially stressed circular nanoplates embedded in an elastic medium, Acta Mechanica, 223(11), 2012, pp. 2311-2330.
23
[24] Gurses, M., Akgoz, B., Civalek, O., Mathematical modeling of vibration problem of nano-sized annular sector plates using the nonlocal continuum theory via eight-node discrete singular convolution transformation, Applied Mathematics and Computation, 219(6), 2012, pp. 3226-3240.
24
[25] Dinev, D., Analytical solution of beam on elastic foundation by singularity functions, Engineering Mechanics, 19(6), 2012, pp. 381-392.
25
[26] Demir, C., Akgoz, B., Erdinc, M.C., Mercan, K., Civalek, O., Free vibration analysis of graphene sheets on elastic matrix, Journal of the Faculty of Engineering and Architecture of Gazi, 32(2), 2017, pp. 551-562.
26
[27] Murmu, T., Pradhan, S.C., Thermo-mechanical vibration of a single-walled carbon nanotube embedded in an elastic medium based on nonlocal elasticity theory, Computational Materials Science, 46(4), 2009, pp. 854-859.
27
[28] Murmu, T., Pradhan, S.C., Buckling analysis of a single-walled carbon nanotube embedded in an elastic medium based on nonlocal elasticity and Timoshenko beam theory and using DQM, Physica E, 41(7), 2009, pp. 1232-1239.
28
[29] Pradhan, S.C., Reddy, G.K., Buckling analysis of single walled carbon nanotube on Winkler foundation using nonlocal elasticity theory and DTM, Computational Materials Science, 50(3), 2011, pp. 1052-1056.
29
[30] Yoon, J., Ru, C.Q., Mioduchowski, A., Vibration of an embedded multiwall carbon nanotube, Composite Science and Technology, 63(11), 2003, pp. 1533-1542.
30
[31] Mercan, K., Numanoglu, H., Akgöz, B., Demir, C., Civalek, Ö., Higher-order continuum theories for buckling response of silicon carbide nanowires (SiCNWs) on elastic matrix, Archives of Applied Mechanics, 87(11), 2017, pp. 1797–1814.
31
[32] Mercan, K., Civalek, O., Buckling analysis of Silicon carbide nanotubes (SiCNTs) with surface effect and nonlocal elasticity using the method of HDQ, Composite Part B: Engineering, 114, 2017, pp. 35-45.
32
[33] Mercan, K., Civalek, Ö., DSC method for buckling analysis of boron nitride nanotube (BNNT) surrounded by an elastic matrix, Composite Structures, 143, 2016, pp. 300-309.
33
[34] Mercan, K., A Comparative Buckling Analysis of Silicon Carbide Nanotube and Boron Nitride Nanotube, International Journal of Engineering & Applied Sciences, 8(4), 2016, pp. 99-107.
34
[35] Demir, Ç., Nonlocal Vibration Analysis for Micro/Nano Beam on Winkler Foundation via DTM, International Journal of Engineering & Applied Sciences, 8(4), 2016, pp. 108-118.
35
[36] Demir, Ç., Civalek, Ö., Nonlocal finite element formulation for vibration, International Journal of Engineering & Applied Sciences, 8, 2016, pp. 109-117.
36
[37] Pradhan, S.C., Nonlocal finite element analysis and small scale effects of CNTs with Timoshenko beam theory, Finite Elements in Analysis and Design, 50, 2012, pp. 8-20.
37
[38] Demir, Ç., Civalek, Ö., A new nonlocal FEM via Hermitian cubic shape functions for thermal vibration of nano beams surrounded by an elastic matrix, Composite Structures, 168, 2017, pp. 872-884.
38
[39] Mahmoud, F.F., Eltaher, M.A., Alshorbagy, A.E., Meletis, E.I., Static analysis of nanobeams including surface effects by nonlocal finite element, Journal of Mechanical Science and Technology, 26(11), 2012, pp. 3555-3563.
39
[40] Ansari, R., Rajabiehfard, R., Arash, B., Nonlocal finite element model for vibrations of embedded multi-layered graphene sheets, Computational Materials Science, 49(4), 2010, pp. 831-838.
40
[41] Phadikar, J.K., Pradhan, S.C., Variational formulation and finite element analysis for nonlocal elastic nanobeams and nanoplates, Computational Materials Science, 49(3), 2010, pp. 492-499.
41
[42] Eltaher, M.A., Alshorbagy, A.E., Mahmoud, F.F., Vibration analysis of Euler-Bernoulli nanobeams by using finite element method, Applied Mathematical Modelling, 37(7), 2013, pp. 4787-4797.
42
[43] Civalek, Ö., Demir, C., A simple mathematical model of microtubules surrounded by an elastic matrix by nonlocal finite element method, Applied Mathematics and Computation, 289, 2016,pp. 335-352.
43
[44] Alshorbagy, A.E., Eltaher, M.A., Mahmoud, F.F., Static analysis of nanobeams using nonlocal FEM, Journal of Mechanical Science and Technology, 27(7), 2013, pp. 2035-2041.
44
[45] Thai, H.T., A nonlocal beam theory for bending, buckling, and vibration of nanobeams, International Journal of Engineering Science, 52, 2012, pp. 56-64.
45
ORIGINAL_ARTICLE
Buckling Behaviors of Symmetric and Antisymmetric Functionally Graded Beams
The present study investigates buckling characteristics of both nonlinear symmetric power and sigmoid functionally graded (FG) beams. The volume fractions of metal and ceramic are assumed to be distributed through a beam thickness by the sigmoid-law distribution (S-FGM), and the symmetric power function (SP-FGM). These functions have smooth variation of properties across the boundary rather than the classical power law distribution which permits gradually variation of stresses at the surface boundary and eliminates delamination. The Voigt model is proposed to homogenize micromechanical properties and to derive the effective material properties. The Euler-Bernoulli beam theory is selected to describe Kinematic relations. A finite element model is exploited to form stiffness and buckling matrices and solve the problem of eignivalue numerically. Numerical results present the effect of material graduations and elasticity ratios on the buckling behavior of FG beams. The proposed model is helpful in stability of mechanical systems manufactured from FGMs.
http://jacm.scu.ac.ir/article_13109_e8124cfb659bf6bf4151c6c70aa9bde7.pdf
2018-04-01T11:23:20
2018-06-20T11:23:20
115
124
10.22055/jacm.2017.23040.1147
Static Stability
Buckling
Functional graded materials
Symmetric Power-Law
Sigmoid Function
Finite element
Khalid H.
Almitani
kalmettani@kau.edu.sa
true
1
Mechanical Engineering Dept., Faculty of Engineering, King Abdulaziz University,
P.O. Box 80204, Tel: +96653908744, Jeddah, Saudi Arabia
Mechanical Engineering Dept., Faculty of Engineering, King Abdulaziz University,
P.O. Box 80204, Tel: +96653908744, Jeddah, Saudi Arabia
Mechanical Engineering Dept., Faculty of Engineering, King Abdulaziz University,
P.O. Box 80204, Tel: +96653908744, Jeddah, Saudi Arabia
LEAD_AUTHOR
[1] Eltaher, M. A., Alshorbagy, A. E., Mahmoud, F. F, Determination of neutral axis position and its effect on natural frequencies of functionally graded macro/nanobeams, Composite Structures, 99, 2013, 193-201.
1
[2] Wang, C. M., Wang, C. Y., Reddy, J.N., Exact solutions for buckling of structural members, 2005, CRC press.
2
[3] Reddy, J. N., Analysis of functionally graded plates, International Journal for Numerical Methods in Engineering, 47(1-3), 2000, pp. 663-684.
3
[4] Rastgo, A., Shafie, H., Allahverdizadeh, A., Instability of curved beams made of functionally graded material under thermal loading, International Journal of Mechanics and Materials in Design, 2(1), 2005, pp. 117-128.
4
[5] Alshorbagy, A. E., Eltaher, M. A., Mahmoud, F. F., Free vibration characteristics of a functionally graded beam by finite element method, Applied Mathematical Modelling, 35(1), 2011, pp. 412-425.
5
[6] Kocaturk, T., Akbas, S. D., Post-buckling analysis of Timoshenko beams made of functionally graded material under thermal loading, Structural Engineering and Mechanics, 41(6), 2012, pp. 775-789.
6
[7] Eltaher, M. A., Emam, S. A., Mahmoud, F. F., Static and stability analysis of nonlocal functionally graded nanobeams, Composite Structures, 96, 2013, pp. 82-88.
7
[8] Li, S. R., Batra, R. C., Relations between buckling loads of functionally graded Timoshenko and homogeneous Euler–Bernoulli beams, Composite Structures, 95, 2013, pp. 5-9.
8
[9] Fu, Y., Chen, Y., Zhang, P., Thermal buckling analysis of functionally graded beam with longitudinal crack, Meccanica, 48(5), 2013, pp. 1227-1237.
9
[10] Akbaş, Ş. D., Kocatürk, T., Post-buckling analysis of functionally graded three-dimensional beams under the influence of temperature, Journal of Thermal Stresses, 36(12), 2013, pp. 1233-1254.
10
[11] Kocaturk, T., Akbas, S. D., Thermal post-buckling analysis of functionally graded beams with temperature-dependent physical properties, Steel and Composite Structures, 15(5), 2013, pp. 481-505.
11
[12] Eltaher, M. A., Hamed, M. A., Sadoun, A. M., Mansour, A., Mechanical analysis of higher order gradient nanobeams, Applied Mathematics and Computation, 229, 2014, pp. 260-272.
12
[13] Ebrahimi, F., Salari, E., Size-dependent thermo-electrical buckling analysis of functionally graded piezoelectric nanobeams, Smart Materials and Structures, 24(12), 2015, p. 125007.
13
[14] Fu, Y., Zhong, J., Shao, X., Chen, Y., Thermal postbuckling analysis of functionally graded tubes based on a refined beam model, International Journal of Mechanical Sciences, 96, 2015, pp. 58-64.
14
[15] Ghiasian, S. E., Kiani, Y., Eslami, M. R., Nonlinear thermal dynamic buckling of FGM beams, European Journal of Mechanics-A/Solids, 54, 2015, pp. 232-242.
15
[16] Amara, K., Bouazza, M., Fouad, B., Postbuckling Analysis of Functionally Graded Beams Using Nonlinear Model, Periodica Polytechnica. Engineering. Mechanical Engineering, 60(2), 2016, p. 121.
16
[17] Rezaiee-Pajand, M., Masoodi, A. R., Exact natural frequencies and buckling load of functionally graded material tapered beam-columns considering semi-rigid connections, Journal of Vibration and Control, 2016, doi: 1077546316668932.
17
[18] Kiani, K., Postbuckling scrutiny of highly deformable nanobeams: A novel exact nonlocal-surface energy-based model, Journal of Physics and Chemistry of Solids, 110, 2017, pp. 327-343.
18
[19] Maleki, V. A., Mohammadi, N., Buckling analysis of cracked functionally graded material column with piezoelectric patches, Smart Materials and Structures, 26(3), 2017, p. 035031.
19
[20] Ben-Oumrane, S., Abedlouahed, T., Ismail, M., Mohamed, B. B., Mustapha, M., El Abbas, A. B., A theoretical analysis of flexional bending of Al/Al 2 O 3 S-FGM thick beams, Computational Materials Science, 44(4), 2009, pp. 1344-1350.
20
[21] Chi, S. H., Chung, Y. L., Cracking in sigmoid functionally graded coating, International Journal of Structural Stability and Dynamics, 18, 2002, pp. 41-53.
21
[22] Mahi, A., Bedia, E. A., Tounsi, A., Mechab, I., An analytical method for temperature-dependent free vibration analysis of functionally graded beams with general boundary conditions, Composite Structures, 92(8), 2010, pp. 1877-1887.
22
[23] Fereidoon, A., Mohyeddin, A., Bending analysis of thin functionally graded plates using generalized differential quadrature method, Archive of Applied Mechanics, 81(11), 2011, pp. 1523-1539.
23
[24] Duc, N. D., Cong, P. H., Nonlinear dynamic response of imperfect symmetric thin sigmoid-functionally graded material plate with metal-ceramic-metal layers on elastic foundation, Journal of Vibration and Control, 21(4), 2015, pp. 637-646.
24
[25] Lee, C. Y., Kim, J. H., Thermal post-buckling and snap-through instabilities of FGM panels in hypersonic flows, Aerospace Science and Technology, 30(1), 2013, pp. 175-182.
25
[26] Jung, W. Y., Han, S. C., Analysis of sigmoid functionally graded material (S-FGM) nanoscale plates using the nonlocal elasticity theory, Mathematical Problems in Engineering, 2013, Article ID 476131, 10p.
26
[27] Akbaş, Ş. D., On post-buckling behavior of edge cracked functionally graded beams under axial loads, International Journal of Structural Stability and Dynamics, 15(4), 2015, p. 1450065.
27
[28] Akbaş, Ş. D., Post-buckling analysis of axially functionally graded three-dimensional beams, International Journal of Applied Mechanics, 7(3), 2015, p. 1550047.
28
[29] Ebrahimi, F., Salari, E., Analytical modeling of dynamic behavior of piezo-thermo-electrically affected sigmoid and power-law graded nanoscale beams, Applied Physics A, 122(9), 2016, p. 793.
29
[30] Hamed, M. A., Eltaher, M. A., Sadoun, A. M., Almitani, K. H., Free vibration of symmetric and sigmoid functionally graded nanobeams, Applied Physics A, 122(9), 2016, p. 829.
30
[31] Swaminathan, K., Sangeetha, D. M., Thermal analysis of FGM plates–A critical review of various modeling techniques and solution methods, Composite Structures, 160, 2017, pp. 43-60.
31
[32] Yahia, S. A., Atmane, H. A., Houari, M. S. A., Tounsi, A., Wave propagation in functionally graded plates with porosities using various higher-order shear deformation plate theories, Structural Engineering and Mechanics, 53(6), 2015, pp. 1143-1165.
32
[33] Atmane, H. A., Tounsi, A., Bernard, F., Mahmoud, S. R., A computational shear displacement model for vibrational analysis of functionally graded beams with porosities, Steel and Composite Structures, 19(2), 2015, pp. 369-384.
33
[34] Attia, A., Tounsi, A., Bedia, E. A., Mahmoud, S. R., Free vibration analysis of functionally graded plates with temperature-dependent properties using various four variable refined plate theories, Steel and Composite Structures, 18(1), 2015, pp. 187-212.
34
[35] Beldjelili, Y., Tounsi, A., Mahmoud, S. R., Hygro-thermo-mechanical bending of S-FGM plates resting on variable elastic foundations using a four-variable trigonometric plate theory, Smart Structures and Systems, 18(4), 2016, pp. 755-786.
35
[36] Bouderba, B., Houari, M. S. A., Tounsi, A., Mahmoud, S. R., Thermal stability of functionally graded sandwich plates using a simple shear deformation theory, Structural Engineering and Mechanics, 58(3), 2016, pp. 397-422.
36
[37] Bousahla, A. A., Benyoucef, S., Tounsi, A., Mahmoud, S. R., On thermal stability of plates with functionally graded coefficient of thermal expansion, Structural Engineering and Mechanics, 60(2), 2016, pp. 313-335.
37
[38] Boukhari, A., Atmane, H. A., Tounsi, A., Adda, B., Mahmoud, S. R., An efficient shear deformation theory for wave propagation of functionally graded material plates, Structural Engineering and Mechanics, 57(5), 2016, pp. 837-859.
38
[39] Bellifa, H., Benrahou, K. H., Hadji, L., Houari, M. S. A., Tounsi, A., Bending and free vibration analysis of functionally graded plates using a simple shear deformation theory and the concept the neutral surface position, Journal of the Brazilian Society of Mechanical Sciences and Engineering, 38(1), 2016, pp. 265-275.
39
[40] Houari, M. S. A., Tounsi, A., Bessaim, A., Mahmoud, S. R., A new simple three-unknown sinusoidal shear deformation theory for functionally graded plates, Steel and Composite Structures, 22(2), 2016, pp. 257-276.
40
[41] Chikh, A., Tounsi, A., Hebali, H., Mahmoud, S. R., Thermal buckling analysis of cross-ply laminated plates using a simplified HSDT, Smart Structures and Systems, 19(3), 2017, pp. 289-297.
41
[42] Besseghier, A, Houari, M.S.A, Tounsi , A., Hassan, S., Free vibration analysis of embedded nanosize FG plates using a new nonlocal trigonometric shear deformation theory, Smart Structures and Systems, 19 (6), 2017, pp. 601-614.
42
[43] Bellifa, H., Benrahou, K. H., Bousahla, A. A., Tounsi, A., Mahmoud, S. R., A nonlocal zeroth-order shear deformation theory for nonlinear postbuckling of nanobeams, Structural Engineering and Mechanics, 62(6), 2017, pp. 695-702.
43
[44] Mori, T., Tanaka, K., Average stress in matrix and average elastic energy of materials with misfitting inclusions, Acta Metallurgica, 21(5), 1973, pp. 571-574.
44
[45] Tomota, Y., Kuroki, K., Mori, T., Tamura, I., Tensile deformation of two-ductile-phase alloys: Flow curves of α-γ Fe-Cr-Ni alloys, Materials Science and Engineering, 24(1), 1976, pp. 85-94.
45
[46] Li, S. R., Su, H. D., Cheng, C. J., Free vibration of functionally graded material beams with surface-bonded piezoelectric layers in thermal environment, Applied Mathematics and Mechanics, 30, 2009, pp. 969-982.
46
[47] Komijani, M., Esfahani, S. E., Reddy, J. N., Liu, Y. P., Eslami, M. R., Nonlinear thermal stability and vibration of pre/post-buckled temperature-and microstructure-dependent functionally graded beams resting on elastic foundation, Composite Structures, 112, 2014, pp. 292-307.
47
[48] Eltaher, M. A., Abdelrahman, A. A., Al-Nabawy, A., Khater, M., Mansour, A., Vibration of nonlinear graduation of nano-Timoshenko beam considering the neutral axis position, Applied Mathematics and Computation, 235, 2014, pp. 512-529.
48
[49] Reddy, J. N., An Introduction to Nonlinear Finite Element Analysis: with applications to heat transfer, fluid mechanics, and solid mechanics, 2014, Oxford University Press.
49
[50] Delale, F., Erdogan, F., The crack problem for a nonhomogeneous plane, Journal of Applied Mechanics, 50(3), 1983, pp. 609-614.
50
ORIGINAL_ARTICLE
Finite Element Solutions of Cantilever and Fixed Actuator Beams Using Augmented Lagrangian Methods
In this paper we develop a numerical procedure using finite element and augmented Lagrangian meth-ods that simulates electro-mechanical pull-in states of both cantilever and fixed beams in microelectromechanical systems (MEMS) switches. We devise the augmented Lagrangian methods for the well-known Euler-Bernoulli beam equation which also takes into consideration of the fringing effect of electric field to allow a smooth transi-tion of the electric field between center of a beam and edges of the beam. The numerical results obtained by the procedure are tabulated and compared with some existing results for beams in MEMS switches in literature. This procedure produces stable and accurate numerical results for simulation of these MEMS beams and can be a useful and efficient alternative for design and determining onset of pull-in for such devices.
http://jacm.scu.ac.ir/article_13110_04e7f84e34e96ab0e4562fe83534f551.pdf
2018-04-01T11:23:20
2018-06-20T11:23:20
125
132
10.22055/jacm.2017.22700.1139
Microelectromechanical switch
pull-in
microbeam
finite element solutions
Augmented Lagrangian methods
Dongming
Wei
dongming.wei@nu.edu.kz
true
1
Department of Mathematics, School of Science and Technology, Nazarbayev University, Astana, 010000, Kazakhstan
Department of Mathematics, School of Science and Technology, Nazarbayev University, Astana, 010000, Kazakhstan
Department of Mathematics, School of Science and Technology, Nazarbayev University, Astana, 010000, Kazakhstan
AUTHOR
Xuefeng
Li
li@loyno.edu
true
2
Department of Mathematics and Computer Science, Loyola University, New Orleans, LA 70118, USA
Department of Mathematics and Computer Science, Loyola University, New Orleans, LA 70118, USA
Department of Mathematics and Computer Science, Loyola University, New Orleans, LA 70118, USA
LEAD_AUTHOR
[1] Younis, M. I., MEMS Linear and nonlinear statics and dynamics, Springer, 2011.
1
[2] Hu, Y. C., Chang, C. M., Huang, S. C., Some design considerations on the electrostatically actuated microstructures, Sensors and Actuators A, 112, 2004, pp. 155–161.
2
[3] Zhang, L. X., Zhao, Y. P., Electromechanical model of RF MEMS switches, Microsystem Technologies, 9(6-7), 2003, pp. 420-426.
3
[4] Batmanov, A., Design, modeling and fabrication of radio-frequency microelectromechanical switches and coplanar filters, Master’s thesis, Otto-von-Guericke-Universitat Magdeburg, April, 2010.
4
[5] Sadeghian, H., Rezazadeh, G., Osterberg, P. M., Application of the generalized differential quadrature method to the study of pull-in phenomena of MEMS switches, Journal of Microelectromechanical Systems, 16(6), 2007, pp. 1334–1340.
5
[6] Zhang, W. M., Yan, H., Peng, Z. K., Meng, G., Electrostatic pull-in instability in MEMS/NEMS: A review, Sensors and Actuators A, 214, 2014, pp. 187–218.
6
[7] Joglekar, M. M., Pawaskar, D. N., Shape optimization of electrostatically actuated microbeams for extending static and dynamic operating ranges, Structural and Multidisciplinary Optimization, 46, 2012, pp. 871–890.
7
[8] Abdalla, M. M., Reddy, C. K., Faris, Waleed F., Gurdal, Z., Optimal design of an electrostatically actuated microbeam for maximum pull-in voltage, Computers and Structures, 83, 2005, pp. 1320–1329.
8
[9] Abdelhakim, L., Numerical model for electro-mechanical analysis based on finite Element method, PAMM: Proceedings in Applied Mathematics and Mechanics, 13, 2013, pp. 245–246.
9
[10] Rochus, V., Rixen, D. J., Golinval, J. C., Finite element modeling of electro-mechanical coupling in capacitive micro-systems, Nano Science and Technology Institute-Nanotech 2005, 3, 2005, pp. 704-707.
10
[11] Ghazavi, M. R., Rezazadeh, G., Azizi, S., Finite element analysis of static and dynamic pullin instability of a fixed-fixed micro beam considering damping effects, Sensors Transducers, 103(4), 2009, pp. 132–143.
11
[12] Zhou, W., Shen, H., Guo, Z., Peng, B., Modeling the pull-in behavior of electrostatically actuated micro beams by an approximate finite element method, International Journal of Numerical Modelling, 27, 2014, pp. 89–98.
12
[13] Ghoussoub, N., Guo, Y. J., On the partial differential equations of electrostatic mems devices: stationary case, SIAM Journal on Mathematical Analysis, 38(5), 2007, pp. 1423–1449.
13
[14] Fortin, M., Glowinski, R., Augmented Lagrangian methods: Applications to the numerical solution of boundary-value problems, 1st Edition, North Holland, 1983.
14
[15] Timoshenko, S. P., Strength of materials: part 1, 2nd Ed. New York: Van Nostrand Company, 1940.
15
[16] Hjelmstad, K., Fundamentals of Structural Mechanics, Second edition, Chapter 7. Springer Inc., 2005.
16
[17] Antes, H., Fundamental solution and integral equations for Timoshenko beams, Computers and Structures, 81, 2003, pp. 383–396.
17
[18] Kahrobaiyan, M. H., Asghari, M., Ahmadian, M. T., Timoshenko beam element based on the modified couple stress theory, International Journal of Mechanical Sciences, 79, 2014, pp. 75–83.
18
[19] Zhang, B., He, Y. M, Liu, D. B., Gan, Z. P., Shen, L., Non-classical Timoshenko beam element based on the strain gradient elasticity theory, Finite Elements in Analysis and Design, 79, 2014, pp. 22–39.
19
[20] Talebi, S., Uosofvand, H., Ariaei, A., Vibration analysis of a rotating closed section composite Timoshenko beam by using differential transform method, Journal of Applied and Computational Mechanics, 1(4), 2015, pp. 181-186.
20
[21] Ai, Z. Y., Cai, J. B., Static interaction analysis between a Timoshenko beam and layered soils by analytical layer element/boundary element method coupling, Applied Mathematical Modelling, 40, 2016, pp. 9485–9499.
21