Jamali, M., Shojaee, T., Mohammadi, B. (2016). Uniaxial Buckling Analysis Comparison of Nanoplate and Nanocomposite Plate with Central Square Cut out Using Domain Decomposition Method. Journal of Applied and Computational Mechanics, 2(4), 230-242. doi: 10.22055/jacm.2016.12543

Majid Jamali; Taghi Shojaee; Bijan Mohammadi. "Uniaxial Buckling Analysis Comparison of Nanoplate and Nanocomposite Plate with Central Square Cut out Using Domain Decomposition Method". Journal of Applied and Computational Mechanics, 2, 4, 2016, 230-242. doi: 10.22055/jacm.2016.12543

Jamali, M., Shojaee, T., Mohammadi, B. (2016). 'Uniaxial Buckling Analysis Comparison of Nanoplate and Nanocomposite Plate with Central Square Cut out Using Domain Decomposition Method', Journal of Applied and Computational Mechanics, 2(4), pp. 230-242. doi: 10.22055/jacm.2016.12543

Jamali, M., Shojaee, T., Mohammadi, B. Uniaxial Buckling Analysis Comparison of Nanoplate and Nanocomposite Plate with Central Square Cut out Using Domain Decomposition Method. Journal of Applied and Computational Mechanics, 2016; 2(4): 230-242. doi: 10.22055/jacm.2016.12543

Uniaxial Buckling Analysis Comparison of Nanoplate and Nanocomposite Plate with Central Square Cut out Using Domain Decomposition Method

^{1}School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran, eng.mjamali@gmail.com

^{2}School of Mechanical Engineering, Iran University of Science and Technology, Tehran, Iran,

Abstract

A comparison of the buckling analysis of the nanoplate and nanocomposite plate with a central square hole embedded in the Winkler foundation is presented in this article. In order to enhance the mechanical properties of the nanoplate with a central cutout, the uniformly distributed carbon nanotubes (CNTs) are applied through the thickness direction. In order to define the shape function of the plate with a square cutout, the domain decomposition method and the orthogonal polynomials are used. At last, to obtain the critical buckling load of the system, the Rayleigh-Ritz energy method is provided. The impacts of the length and width of the plate, the dimension of the square cutout, and the elastic medium on the nanoplate and nanocomposite plate are presented in this study.

[1] Murmu, T., and Pradhan, S. C., "Buckling of biaxially compressed orthotropic plates at small scales," Mechanics Research Communications, Vol. 36, pp. 933-938, 2009.

[2] Pradhan, S. C., "Buckling of single layer graphene sheet based on nonlocal elasticity and higher order shear deformation theory," Physics Letters A, Vol. 373, pp. 4182-4188, 2009.

[3] Aksencer, T., and Aydogdu, M., "Levy type solution method for vibration and buckling of nanoplates using nonlocal elasticity theory," Physica E: Low-dimensional Systems and Nanostructures, Vol. 43, pp. 954-959, 2011.

[4] Hashemi, S. H., and Samaei, A. T., "Buckling analysis of micro/nanoscale plates via nonlocal elasticity theory," Physica E: Low-dimensional Systems and Nanostructures, Vol. 43, pp. 1400-1404, 2011.

[5] Samaei, A. T., Abbasion, S., and Mirsayar, M. M., "Buckling analysis of a single-layer graphene sheet embedded in an elastic medium based on nonlocal Mindlin plate theory," Mechanics Research Communications, Vol. 38, pp. 481-485, 2011.

[6] Farajpour, A., Danesh, M., and M. Mohammadi, "Buckling analysis of variable thickness nanoplates using nonlocal continuum mechanics," Physica E: Low-dimensional Systems and Nanostructures, Vol. 44, pp. 719-727, 2011.

[7] Farajpour, A., Shahidi, A. R., Mohammadi, M., and Mahzoon, M., "Buckling of orthotropic micro/nanoscale plates under linearly varying in-plane load via nonlocal continuum mechanics," Composite Structures, Vol. 94, pp. 1605-1615, 2012.

[8] Murmu, T., Sienz, J., Adhikari, S., and Arnold, C., "Nonlocal buckling of double-nanoplate-systems under biaxial compression," Composites Part B: Engineering, Vol. 44, pp. 84-94, 2013.

[9] Radić, N., Jeremić, D., Trifković, S., and Milutinović, M., "Buckling analysis of double-orthotropic nanoplates embedded in Pasternak elastic medium using nonlocal elasticity theory," Composites Part B: Engineering, Vol. 61, pp. 162-171, 2014.

[10] Golmakani, M. E., and Rezatalab, J., "Nonuniform biaxial buckling of orthotropic nanoplates embedded in an elastic medium based on nonlocal Mindlin plate theory," Composite Structures, Vol. 119, pp. 238-250, 2015.

[11] Arani, A. G., Maghamikia, S., Mohammadimehr, M., and Arefmanesh, A., "Buckling analysis of laminated composite rectangular plates reinforced by SWCNTs using analytical and finite element methods," Journal of Mechanical Science and Technology, Vol. 25, pp. 809-820, 2011.

[12] Jam, J. E., and Maghamikia, S., "Elastic buckling of composite plate reinforced with carbon nano tubes," International Journal of Engineering Science and Technology, Vol. 3, pp. 4090-4101, 2011.

[13] Mohammadimehr, M., Mohandes, M., and Moradi, M., "Size dependent effect on the buckling and vibration analysis of double-bonded nanocomposite piezoelectric plate reinforced by boron nitride nanotube based on modified couple stress theory," Journal of Vibration and Control, 2014.

[14] Asadi, E., and Jam, J. E., "Analytical and Numerical Buckling Analysis of Carbon Nanotube Reinforced Annular Composite Plates," Int J Advanced Design and Manufacturing Technology, Vol. 7, pp. 35-44, 2014.

[15] Mohammadimehr, M., Rousta-Navi, B., and Ghorbanpour-Arani, A., "Biaxial Buckling and Bending of Smart Nanocomposite Plate Reinforced by CNTs using Extended Mixture Rule Approach," Mechanics of Advanced Composite Structures, Vol. 1, pp. 17-26, 2014.

[16] Ghorbanpour Arani, A., Jamali, M., Mosayyebi, M., and Kolahchi, R., "Wave propagation in FG-CNT-reinforced piezoelectric composite micro plates using viscoelastic quasi-3D sinusoidal shear deformation theory," Composites Part B: Engineering, Vol. 95, pp. 209-224, 2016.

[17] Ghorbanpour Arani, A., Jamali, M., Ghorbanpour-Arani, A., Kolahchi, R., and Mosayyebi, M., "Electro-magneto wave propagation analysis of viscoelastic sandwich nanoplates considering surface effects," Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2016.

[18] Wattanasakulpong, N., and Chaikittiratana, A., "Exact solutions for static and dynamic analyses of carbon nanotube-reinforced composite plates with Pasternak elastic foundation," Applied Mathematical Modelling, Vol. 39, pp. 5459-5472, 2015.

[19] Ashoori Movassagh, A., and Mahmoodi, M. J., "A micro-scale modeling of Kirchhoff plate based on modified strain-gradient elasticity theory," European Journal of Mechanics - A/Solids, Vol. 40, pp. 50-59, 2013.

[20] Ghorbanpour Arani, A., and Shokravi, M., "Vibration response of visco-elastically coupled double-layered visco-elastic graphene sheet systems subjected to magnetic field via strain gradient theory considering surface stress effects," Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanoengineering and Nanosystems, 2014.

[21] Ghorbanpour Arani, A., Jamali, M., Mosayyebi, M., and Kolahchi, R., "Analytical modeling of wave propagation in viscoelastic functionally graded carbon nanotubes reinforced piezoelectric microplate under electro-magnetic field," Proceedings of the Institution of Mechanical Engineers, Part N: Journal of Nanoengineering and Nanosystems, 2015.

[22] Pan, Z., Cheng, Y., and Liu, J., "A semi-analytical analysis of the elastic buckling of cracked thin plates under axial compression using actual non-uniform stress distribution," Thin-Walled Structures, Vol. 73, pp. 229-241, 2013.

[23] Ghorbanpour Arani, A., Kolahchi, R., Mosayyebi, M., and Jamali, M., "Pulsating fluid induced dynamic instability of visco-double-walled carbon nano-tubes based on sinusoidal strain gradient theory using DQM and Bolotin method," International Journal of Mechanics and Materials in Design, pp. 1-22, 2014.

[24] Reddy, J. N., "Mechanics of Laminated Composite Plates and Shells: Theory and Analysis," second edition ed: CRC Press, 2003.

[25] Ghorbanpour Arani, A., Kolahchi, R., and Vossough, H., "Buckling analysis and smart control of SLGS using elastically coupled PVDF nanoplate based on the nonlocal Mindlin plate theory," Physica B: Condensed Matter, Vol. 407, pp. 4458-4465, 2012.

[26] Lam, K. Y., Hung, K. C., and Chow, S. T., "Vibration analysis of plates with cutouts by the modified Rayleigh-Ritz method," Applied Acoustics, Vol. 28, pp. 49-60, 1989.

[27] Lam K. Y., and Hung, K. C., "Orthogonal polynomials and sub-sectioning method for vibration of plates," Computers & Structures, Vol. 34, pp. 827-834, 1990.

[28] Liew, K. M., Hung, K. C., and Lim, M. K., "Method of domain decomposition in vibrations of mixed edge anisotropic plates," International Journal of Solids and Structures, Vol. 30, pp. 3281-3301, 1993.

[29] Liew, K. M., Hung, K. C., and Sum, Y. K., "Flexural vibration of polygonal plates: treatments of sharp re-entrant corners," Journal of Sound and Vibration, Vol. 183, pp. 221-238, 1995.

[30] Liew, K. M., Kitipornchai, S., Leung, A. Y. T., and Lim, C. W., "Analysis of the free vibration of rectangular plates with central cut-outs using the discrete Ritz method," International Journal of Mechanical Sciences, Vol. 45, pp. 941-959, 2003.

[31] Bhat, R. B., " Natural frequencies of rectangular plates using characteristic orthogonal polynomials in rayleigh-ritz method," Journal of Sound and Vibration, Vol. 102, pp. 493-499, 1985.

[32] Lam, K. Y., and Hung, K. C., "Vibration study on plates with stiffened openings using orthogonal polynomials and partitioning method," Computers & Structures, Vol. 37, pp. 295-301, 1990.

[33] Liew, K. M., Ng, T. Y., and Kitipornchai, S., "A semi-analytical solution for vibration of rectangular plates with abrupt thickness variation," International Journal of Solids and Structures, Vol. 38, pp. 4937-4954, 2001.

[34] Shams, S., and Soltani, B., "Buckling of Laminated Carbon Nanotube-Reinforced Composite Plates on Elastic Foundations Using a Meshfree Method," Arabian Journal for Science and Engineering, Vol. 41, pp. 1981-1993, 2016.

[35] Pradhan, S. C., and Murmu, T., "Small scale effect on the buckling of single-layered graphene sheets under biaxial compression via nonlocal continuum mechanics," Computational Materials Science, Vol. 47, pp. 268-274, 2009.