Menni, Y., Azzi, A., Chamkha, A. (2019). The Solar Air Channels: Comparative Analysis, Introduction of Arc-shaped Fins to Improve the Thermal Transfer. Journal of Applied and Computational Mechanics, 5(4), 616-626. doi: 10.22055/jacm.2018.26785.1356

Younes Menni; Ahmed Azzi; Ali. J Chamkha. "The Solar Air Channels: Comparative Analysis, Introduction of Arc-shaped Fins to Improve the Thermal Transfer". Journal of Applied and Computational Mechanics, 5, 4, 2019, 616-626. doi: 10.22055/jacm.2018.26785.1356

Menni, Y., Azzi, A., Chamkha, A. (2019). 'The Solar Air Channels: Comparative Analysis, Introduction of Arc-shaped Fins to Improve the Thermal Transfer', Journal of Applied and Computational Mechanics, 5(4), pp. 616-626. doi: 10.22055/jacm.2018.26785.1356

Menni, Y., Azzi, A., Chamkha, A. The Solar Air Channels: Comparative Analysis, Introduction of Arc-shaped Fins to Improve the Thermal Transfer. Journal of Applied and Computational Mechanics, 2019; 5(4): 616-626. doi: 10.22055/jacm.2018.26785.1356

The Solar Air Channels: Comparative Analysis, Introduction of Arc-shaped Fins to Improve the Thermal Transfer

^{1}Unit of Research on Materials and Renewable Energies, Department of Physics, Faculty of Sciences, Abou Bekr Belkaid University, BP 119-13000-Tlemcen, Algeria

^{2}Department of Mechanical Engineering, Faculty of Technology, Abou Bekr Belkaid University, BP 230-13000-Tlemcen, Algeria

^{3}echanical Engineering Department, Prince Sultan Endowment for Energy and Environment, Prince Mohammad Bin Fahd University, Al-Khobar 31952, Saudi Arabia

^{4}RAK Research and Innovation Center, American University of Ras Al Khaimah, United Arab Emirates

Abstract

The problem under investigation contains a computational simulation of a specific heat exchanger with complex geometry fins. The problem solved is potentially interesting for researchers and engineers working on solar collectors and aerospace industry. It is known that heat transfer enhancement can be achieved by creating longitudinal vortices in the flow. These vortices can be generated by arc-shaped fins, and a computational analysis of such solar air channels is not a simple task. Therefore, we used a present-day commercial CFD code to solve the problem. The mathematical problem including the main equations and their explanation, as well as the numerical procedure was presented. The impact of arc-fins’ spacings on streamlines and temperature distributions was completely investigated, as well as the heat transfer rate, pressure drop and thermal enhancement factor. The Nusselt number (Nu) and friction loss (f) values of the solar air channel at AR = 1.321 (aspect ratio of channel width-to-height) and S = Pi/2 are found to be around 11.963% and 26.006%; 21.645% and 40.789%; 26.196% and 50.314%; and 30.322% and 58.355% higher than that with S = 3Pi/4, Pi, 5Pi/4 and 3Pi/2, respectively. Importantly, the arc-fins with Re = 12,000 at S = Pi/2 showed higher thermal enhancement performance than the one at S = 3Pi/4, Pi, 5Pi/4 and 3Pi/2 around 2.530%, 6.576%, 6.615% and 6.762%, respectively. This study contains the information which seems to be important for practical engineers.

[1] L.C. Demartini, H.A. Vielmo, and S.V Möller, Numeric and experimental analysis of the turbulent flow through a channel with baffle plates, Journal of Brazilian Society of Mechanical Sciences and Engineering, 26(2), 2004, pp. 153-159.

[2] Nasiruddin, and M.K. Kamran Siddiqui, Heat transfer augmentation in a heat exchanger tube using a baffle, International Journal of Heat and Fluid Flow, 28(2), 2007, pp. 318-328.

[3] P. Promvonge, S. Sripattanapipat, and S. Kwankaomeng, Laminar periodic flow and heat transfer in square channel with 45° inline baffles on two opposite walls, International Journal of Thermal Sciences, 49, 2010, pp. 963-975.

[4] H. Liu, and J. Wang, Numerical investigation on synthetical performances of fluid flow and heat transfer of semi attached rib-channels, International Journal of Heat and Mass Transfer, 54, 2011, pp. 575-583.

[5] C. Nuntadusit, M. Wae-hayee, A. Bunyajitradulya, and S. Eiamsaard, Thermal visualization on surface with transverse perforated ribs, International Communications in Heat and Mass Transfer, 39, 2012, pp. 634-639.

[6] A. Tandiroglu, Effect of flow geometry parameters on transient heat transfer for turbulent flow in a circular tube with baffle inserts, International Journal of Heat and Mass Transfer, 49, 2006, pp. 1559-1567.

[7] P. Dutta, and A. Hossain, Internal cooling augmentation in rectangular channel using two inclined baffles, International Journal of Heat and Fluid Flow, 26, 2005, pp. 223-232.

[8] T.T. Wong, C.W. Leung, Z.Y. Li, and W.Q. Tao, Turbulent convection of air-cooled rectangular duct with surface-mounted cross-ribs, International Journal of Heat and Mass Transfer, 46, 2003, pp. 4629-4638.

[9] B.K.P. Ary, M.S. Lee, S.W. Ahn, and D.H. Lee, The effect of the inclined perforated baffle on heat transfer and flow patterns in the channel, International Communications in Heat and Mass Transfer, 39, 2012, pp. 1578-1583.

[10] S. Sripattanapipat, and P. Promvonge, Numerical analysis of laminar heat transfer in a channel with diamond-shaped baffles, International Communications in Heat and Mass Transfer, 36, 2009, pp. 32-38.

[11] R. Kamali, and A.R. Binesh, The importance of rib shape effects on the local heat transfer and flow friction characteristics of square ducts with ribbed internal surfaces, International Communications in Heat and Mass Transfer, 35, 2008, pp. 1032-1040.

[12] P. Sriromreun, C. Thianpong, and P. Promvonge, Experimental and numerical study on heat transfer enhancement in a channel with Z-shaped baffles, International Communications in Heat and Mass Transfer, 39, 2012, pp. 945-952.

[13] C. Thianpong, K. Yongsiri, K. Nanan, and S. Eiamsa-ard, Thermal performance evaluation of heat exchangers fitted with twisted-ring turbulators, International Communications in Heat and Mass Transfer, 39, 2012, pp. 861-868

[14] S. Tamna, S. Skullong, C. Thianpong, and P. Promvonge, Heat transfer behaviors in a solar air heater channel with multiple V-baffle vortex generators, Solar Energy, 110, 2014, pp. 720-735.

[15] Y. Menni, A. Azzi, C. Zidani, and B. Benyoucef, Numerical analysis of turbulent forced-convection flow in a channel with staggered l-shaped baffles, Journal of New Technology and Materials, 6(2), 2016, pp. 44-55.

[16] Y. Menni, A. Azzi, and C. Zidani, Use of waisted triangular-shaped baffles to enhance heat transfer in a constant temperature-surfaced rectangular channel, Journal of Engineering Science and Technology, 12(12), 2017, pp. 3251-3273.

[17] Y. Menni, A. Azzi, F. Didi, and S. Harmand, Computational fluid dynamical analysis of new obstacle design and its impact on the heat transfer enhancement in a specific type of air flow geometry, Computational Thermal Sciences, 10(5), 2018, pp. 421-447.

[18] Y. Menni, and A. Azzi, Computational fluid dynamical analysis of turbulent heat transfer in a channel fitted with staggered v-shaped baffles, World Journal of Modelling and Simulation, 14(2), pp. 108-123.

[19] Y. Menni, and A. Azzi, Numerical analysis of thermal and aerodynamic fields in a channel with cascaded baffles, Periodica Polytechnica Mechanical Engineering, 62(1), 2018, 16-25.

[20] Y. Menni, and A. Azzi, Effect of fin spacing on turbulent heat transfer in a channel with cascaded rectangular-triangular fins, Journal of New Technology and Materials, 7(2), 2017, pp. 10-21.

[21] Y. Menni, and A. Azzi, Design and performance evaluation of air solar channels with diverse baffle structures, Computational Thermal Sciences, 10(3), 2018, pp. 225-249.

[22] Y. Menni, A. Azzi, and A.J. Chamkha, Enhancement of convective heat transfer in smooth air channels with wall-mounted obstacles in the flow path, Journal of Thermal Analysis and Calorimetry, 2018, https://doi.org/10.1007/s10973-018-7268-x.

[23] Y. Menni, A. Azzi, and A.J. Chamkha, Aerodynamics and heat transfer over solid-deflectors in transverse, staggered, corrugated-upstream and corrugated-downstream patterns, Periodica Polytechnica Mechanical Engineering, 62(3), 2018, pp. 209-217.

[24] Y. Menni, A.J. Chamkha, and A. Azzi, Nanofluid Transport in Porous Media - A Review, Special Topics & Reviews in Porous Media, 2018, doi: 10.1615/SpecialTopicsRevPorousMedia.2018027168

[25] Y. Menni, A. Azzi, and C. Zidani, Etude numérique comparative entre deux types de chicanes et ailettes (rectangulaire et rectangulaire arrondie) utilisées pour améliorer les performances des capteurs solaires plans à air, Revue des Energies Renouvelables, 18(3), 2015, pp. 347-361.

[26] Y. Menni, A. Azzi, C. Zidani, and B. Benyoucef, Low-Reynolds-number turbulent forced-convection flow over graded baffle plates, Revue des Energies Renouvelables, 19(2), 2016, pp. 235-250.

[27] Y. Menni, A. Azzi, and C. Zidani, Computational analysis of heat transfer and fluid flow characteristics over flat bars of different heights, Revue des Energies Renouvelables, 19(3), 2016, pp. 345-366.

[28] Y. Menni, A. Azzi, and C. Zidani, Computational analysis of turbulent forced convection in a channel with staggered corrugated baffles, Communication Science & Technology, 16, 2016, pp. 34-43.

[29] Y. Menni, A. Azzi, and C. Zidani, Numerical study of turbulent heat transfer in a trapezoïdal channel with flat baffles, Communication Science & Technology, 17, 2016, pp. 67-77.

[30] Y. Menni, A. Azzi, and C. Zidani, Contribution numérique à l’étude bidimensionnelle de la convection forcée turbulente dans un canal horizontal muni des chicanes transversales sous forme rectangulaire arrondie, Revue des Sciences et Sciences de l’Ingénieur, 6(1), 2016, pp. 17-26.

[31] P. Promvonge, Thermal performance in square-duct heat exchanger with quadruple V-finned twisted tapes, Applied Thermal Engineering, 91, 2015, pp. 298-307.

[32] S. Chamoli, A Taguchi approach for optimization of flow and geometrical parameters in a rectangular channel roughened with V down perforated baffles, Case Studies in Thermal Engineering, 5, 2015, pp. 59-69.

[33] S. Chamoli, and N.S. Thakur, Correlations for solar air heater duct with V-shaped perforated baffles as roughness elements on absorber plate, International Journal of Sustainable Energy, 2013, http://dx.doi.org/10.1080/14786451.2013.857318

[34] A.R. Noghrehabadi, A. Behseresht, M. Ghalambaz, and J. Behseresht, Natural-convection flow of nanofluids over vertical cone embedded in non-darcy porous media, Journal of Thermophysics and Heat Transfer, 27, 2013, pp. 334-341.

[35] A.R. Noghrehabadi, R. Pourrajab, and M. Ghalambaz, Effect of partial slip boundary condition on the flow and heat transfer of nanofluids flow past stretching sheet prescribed constant wall temperature, International Journal of Thermal Sciences, 54, 2012, pp. 253-261.

[36] A.R. Noghrehabadi, R. Pourrajab, and M. Ghalambaz, Flow and heat transfer of nanofluids over stretching sheet taking into account partial slip and thermal convective boundary conditions, Heat and Mass Transfer, 49, 2013, pp. 1357-1366.

[37] A.R. Noghrehabadi, M.R. Saffarian, R. Pourrajab, and M. Ghalambaz, Entropy analysis for nanofluid flow over a stretching sheet in the presence of heat generation/absorption and partial slip, Journal of Mechanical Science and Technology, 27, 2013, pp. 927-937.

[38] M. Ghalambaz, A. Doostanidezfouli, E. Izadpanahi, and A.J. Chamkha, Phase- change heat transfer in a cavity heated from below: the effect of utilizing single or hybrid nanoparticles as additives, Journal of the Taiwan Institute of Chemical Engineers, 72, 2017, pp. 104-115.

[39] A.J. Chamkha, and J. Al-Humoud, Mixed convection heat and mass transfer of non-newtonian fluids from a permeable surface embedded in a porous medium, International Journal of Numerical Methods for Heat & Fluid Flow, 17, 2007, pp. 195-212.

[40] A.J. Chamkha, and A.-R.A. Khaled, Similarity solutions for hydromagnetic mixed convection heat and mass transfer for Hiemenz flow through porous media, International Journal of Numerical Methods for Heat & Fluid Flow, 10, 2000, pp. 94-115.

[41] A.J. Chamkha, and A.M. Rashad, Natural convection from a vertical permeable cone in a nanofluid saturated porous media for uniform heat and nanoparticles volume fraction fluxes, International Journal for Numerical Methods in Heat and Fluid Flow, 22, 2012, pp. 1073-1085.

[42] A.J. Chamkha, S.M.M. EL-Kabeir, and A.M. Rashad, Heat and mass transfer by non-darcy free convection from a vertical cylinder embedded in porous media with a temperature-dependent viscosity, International Journal for Numerical Methods in Heat and Fluid Flow, 21, 2011, pp.847-863.

[43] A.J. Chamkha, A. Doostanidezfuli, E. Izadpanahi, and M. Ghalambaz, Phase- change heat transfer of single/hybrid nanoparticles-enhanced phase-change materials over a heated horizontal cylinder confined in a square cavity, Advanced Powder Technology, 28, 2017, pp. 385-397.

[44] A.J. Chamkha, Non-similar solutions for heat and mass transfer by hydromagnetic mixed convection flow over a plate in porous media with surface suction or injection, International Journal of Numerical Methods for Heat & Fluid Flow, 10, 2000, pp. 142-162.

[45] A.J. Chamkha, Unsteady laminar hydromagnetic flow and heat transfer in porous channels with temperature-dependent properties, International Journal of Numerical Methods for Heat & Fluid Flow, 11, 2001, pp. 430-448.

[46] R. Kumar, A. Kumar, R. Chauhan, and R. Maithani, Comparative study of effect of various blockage arrangements on thermal hydraulic performance in a roughened air passage, Renewable and Sustainable Energy Reviews, 81, 2018, pp. 447-463.

[47] A. Kumar, R. Chauhan, R. Kumar, T. Singh, M. Sethi, A. Kumar, A. Sharma, Developing heat transfer and pressure loss in an air passage with multi discrete V-blockages,Experimental Thermal and Fluid Science, 84, 2017, pp.266-278.

[48] A. Sharma, R. Chauhan, T. Singh, A. Kumar, R. Kumar, A. Kumar, and M. Sethi, Optimizing discrete V obstacle parameters using a novel Entropy-VIKOR approach in a solar air flow channel, Renewable Energy,106 2017, pp.310-320.

[49] R. Kumar, M. Sethi, R. Chauhan, and A. Kumar, Experimental study of enhancement of heat transfer and pressure drop in a solar air channel with discretized broken V-pattern baffle, Renewable Energy, 101, 2017, pp. 856-872

[50] R. Kumar, A. Kumar, A. Sharma, R. Chauhan, and M. Sethi, experimental study of heat transfer enhancement in a rectangular duct distributed by multi Vâ€‘perforated baffle of different relative baffle width, Heat and Mass Transfer, 53, 2017, pp. 1289-1304.

[51] A. Kumar, and M.H. Kim, Thermal hydraulic performance in a solar air heater channel with multi v-type perforated baffles, Energies, 9, 2016, pp. 564

[52] B.E. Launder, and D.B. Spalding, The numerical computation of turbulent flows, Computer Methods Applied Mechanics Eng., 3, 1974, pp. 269-289.

[53] S.V. Patankar, Numerical heat transfer and fluid flow, McGraw-Hill, New York, 1980.

[54] B.P. Leonard, and S. Mokhtari, Ultra-sharp nonoscillatory convection schemes for high-speed steady multidimensional flow, NASA TM 1-2568, NASA Lewis Research Center, 1990.