Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2
2
2016
12
01
Linear dynamic response of nanobeams accounting for higher gradient effects
54
64
EN
Dario
Abbondanza
Dipartimento di ingegneria meccanica e aeronautica, “La Sapienza”, Rome, Italy
Daniele
Battista
Dipartimento di ingegneria meccanica e aeronautica, “La Sapienza”, Rome, Italy
Francescogiuseppe
Morabito
Dipartimento di ingegneria meccanica e aeronautica, “La Sapienza”, Rome, Italy
Chiara
Pallante
Dipartimento di ingegneria meccanica e aeronautica, “La Sapienza”, Rome, Italy
Raffaele
Barretta
Dipartimento di strutture per l’ingegneria e l’architettura, Università degli Studi di Napoli “Federico II”, Naples, Italy
rabarret@unina.it
Raimondo
Luciano
Dipartimento di ingegneria civile e meccanica, Università degli Studi di Cassino e del Lazio Meridionale, Cassino (FR), Italy
Francesco
Marotti de Sciarra
Dipartimento di strutture per l’ingegneria e l’architettura, Università degli Studi di Napoli “Federico II”, Naples, Italy
Giuseppe
Ruta
Dipartimento di ingegneria strutturale e geotecnica, “La Sapienza”, Rome, Italy
10.22055/jacm.2016.12330
Linear dynamic response of simply supported nanobeams subjected to a variable axial force is assessed by Galerkin numerical approach. Constitutive behavior is described by three functional forms of elastic energy densities enclosing nonlocal and strain gradient effects and their combination. Linear stationary dynamics of nanobeams is modulated by an axial force which controls the global stiffness of nanostrucure and hence its angular frequencies. Influence of the considered elastic energy densities on dynamical response is investigated and thoroughly commented.
Nanobeams,Higher gradient effects,Dynamic response
https://jacm.scu.ac.ir/article_12330.html
https://jacm.scu.ac.ir/article_12330_953353d6907f8a892358b0e268e7a5d4.pdf
Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2
2
2016
12
01
Deflection of a hyperbolic shear deformable microbeam under a concentrated load
65
73
EN
Bekir
Akgöz
0000-0003-2097-2555
Akdeniz University Civil Eng. Dept.
bekirakgoz@akdeniz.edu.tr
Ömer
Civalek
0000-0003-1907-9479
Civil Engineering Dept.
civalek@yahoo.com
10.22055/jacm.2016.12331
Deflection analysis of a simply supported microbeam subjected to a concentrated load at the middle is investigated on the basis of a shear deformable beam theory and non-classical theory. Effects of shear deformation and small size are taken into consideration by hyperbolic shear deformable beam theory and modified strain gradient theory, respectively. The governing differential equations and corresponding boundary conditions are obtained by implementing minimum total potential energy principle. Navier-type solution is employed to achieve an analytical solution for deflections of simply supported homogeneous microbeams. The effects of shear deformation, material length scale parameter and slenderness ratio on the bending response of microbeams are investigated in detail.
Bending,hyperbolic shear deformation theory,modified strain gradient theory,size dependency
https://jacm.scu.ac.ir/article_12331.html
https://jacm.scu.ac.ir/article_12331_74384370b62dc8eb7cffcaa6a11331d5.pdf
Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2
2
2016
12
01
Time integration of rectangular membrane free vibration using spline-based differential quadrature
74
79
EN
Sara
Javidpoor
Bachelor’s degree student of department of marine engineering, Khorramshahr university of marine science and technology
sara.javidpour73@gmail.com
Nassim
Ale Ali
Department of Marine Engineering, Khorramshahr University of Marine Science & Technology
aleali@kmsu.ac.ir
Amer
Kabi
3Assistant professor of department of marine engineering, Khorramshahr university of marine science and technology
kaabi_amer@kmsu.ac.ir
10.22055/jacm.2016.12365
In this paper, numerical spline-based differential quadrature is presented for solving the boundary and initial value problems, and its application is used to solve the fixed rectangular membrane vibration equation. For the time integration of the problem, the Runge–Kutta and spline-based differential quadrature methods have been applied. The Runge–Kutta method was unstable for solving the problem, with large errors in its results, but the spline-based differential quadrature method obtained results that agree with the exact solution. The relative errors were calculated and investigated for different values of time and spatial nodes of discretisation. It seems that the spline-based differential quadrature method is proper for the full simulation of membrane vibration in both spatial and temporal solutions. For the time solving of the membrane vibration, conventional methods, such as the Runge–Kutta method, are not useful even if the time steps are considered too small.
Runge–Kutta method,spline-based differential quadrature method,membrane vibration,Time integration
https://jacm.scu.ac.ir/article_12365.html
https://jacm.scu.ac.ir/article_12365_152c0c23a43caac99f641951921f8c41.pdf
Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2
2
2016
12
01
Bending Analysis of Thick Isotropic Plates by Using 5th Order Shear Deformation Theory
80
95
EN
Yuwaraj M.
Ghugal
Head of Department of Applied Mechanics, Govt. College of EngineeringKarad, Shivaji University, Maharashtra-415124, India
ghugal@rediffmail.com
Param D.
Gajbhiye
M-TECH STUDENT
gparam786@gmail.com
10.22055/jacm.2016.12366
A 5<sup>th</sup> order shear deformation theory considering transverse shear deformation effect as well as transverse normal strain deformation effect is presented for static flexure analysis of simply supported isotropic plate. The assumed displacement field accounts for non-linear variation of in-plane displacements as well as transverse displacement through the plate thickness. The condition of zero transverse shear stresses on the upper and lower surface of plate is satisfied. Hence the present formulation does not require the shear correction factor generally associated with the first order shear deformable theory. Governing equations and boundary conditions of the theory are obtained using the principle of virtual work. Closed-form analytical solutions for simply supported square isotropic thick plates subjected to single sinusoidal distributed loads are obtained. Numerical results for static flexure analysis include the effects of side to thickness ratio and plate aspect ratio for simply supported isotropic plates. Numerical results are obtained using MATLAB programming. The results of present theory are in close agreement with those of higher order shear deformation theories and exact 3D elasticity solutions.
Thick isotropic plate,5th order shear deformation theory,static flexure,transverse shear stress,transverse normal stress,Navier solution
https://jacm.scu.ac.ir/article_12366.html
https://jacm.scu.ac.ir/article_12366_b9e3037fda12c4f05a83ea31f80271e6.pdf
Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2
2
2016
12
01
Concerning the Effect of a Viscoelastic Foundation on the Dynamic Stability of a Pipeline System Conveying an Incompressible Fluid
96
117
EN
Vincent
Olunloyo
Department of Systems Engineering, Faculty of Engineering, University of Lagos
vosoolunloyo@hotmail.com
Charles
Osheku
Centre for Space Transport and Propulsion, National Space Research and Development Agency
charlesosheku2002@yahoo.com
Patrick
Olayiwola
Department of Mechanical & Biomedical Engineering, College of Engineering, Bells University of Technology
olayiwola_patrickshola@yahoo.com
10.22055/jacm.2016.12393
In this paper, we present an analytical method for solving a well-posed boundary value problem of mathematical physics governing the vibration characteristics of an internal flow propelled fluid-structure interaction where the pipeline segment is idealized as an elastic hollow beam conveying an incompressible fluid on a viscoelastic foundation. The effect of Coriolis and damping forces on the overall dynamic response of the system is investigated. In actuality, for a pipe segment supported at both ends and subject to a free motion, these two forces generate conjugate complex frequencies for all flow velocities. On employing integral transforms and complex variable functions, a closed form analytical expression is derived for the overall dynamic response. It is demonstrated that a concise mathematical expression for the natural frequency associated with any mode of vibration can be deduced from the algebraic product of the complex frequency pairs. By a way of comparative analysis for damping decrement physics reminiscent with laminated structures, mathematical expressions are derived to illustrate viscoelastic damping effects on dynamic stability for any flow velocity. The integrity of the analytical solution is verified and validated by confirming theresults in literature in appropriate asymptotic limits.
Analytical method,viscoelastic foundation,Coriolis and damping forces,conjugate complex frequency pairs and damping decrement physics
https://jacm.scu.ac.ir/article_12393.html
https://jacm.scu.ac.ir/article_12393_e710693b0a11a860990fe9728243a690.pdf
Shahid Chamran University of Ahvaz
Journal of Applied and Computational Mechanics
2383-4536
2
2
2016
12
01
Thermoelastic Analysis of Functionally Graded Hollow Cylinder Subjected to Uniform Temperature Field
118
127
EN
Dilip
B
Kamdi
Head Department of Mathematics, R.M. G. College, Saoli, Chandrapur, India
navvanna@rediffmail.com
Navneet
Kumar
Lamba
0000-0002-6283-1681
Head Deptt. of Mathematics
Shri Lemdeo Patil Mahavidyalaya, Nagpur, INDIA
navneetkumarlamba@gmail.com
10.22055/jacm.2016.12414
This paper deals with the determination of displacement function and thermal stresses of a finite length isotropic functionally graded hollow cylinder subjected to uniform temperature field. The solution of the governing thermoelastic equation is obtained, as suggested by Spencer et al. for anisotropic laminates. Numerical calculations are also carried out for FGM (Functionally graded material) system consisting of ceramic Alumina (Al<sub>2</sub>O<sub>3</sub>), along with Nickel (Ni) as the metallic component varying with distance in one direction and illustrated graphically.
Uniformly heated,Hollow cylinder,Thermoelastic stresses,Functionally graded material,Inverse problem
https://jacm.scu.ac.ir/article_12414.html
https://jacm.scu.ac.ir/article_12414_da0a0af7483523f15d52e8ed3d78cc51.pdf