Journal of Applied and Computational Mechanics

A

Abadian, Fateme Electromechanical Performance of NEMS Actuator Fabricated from Nanowire under quantum vacuum fluctuations using GDQ and MVIM [Volume 3, Issue 2, 2017, Pages 125-134]
Abbdel-Naeem, Shereen Multiscale Numerical Modeling of Solute Transport with Two-‎Phase Flow in a Porous Cavity [Volume 7, Issue 2, 2021, Pages 396-403]
Abbès, Boussad A FEM Multiscale Homogenization Procedure using Nanoindentation for High Performance Concrete [Volume 6, Issue 3, 2020, Pages 493-504]
Abbès, Boussad Finite Element and Experimental Investigation on the Effect of ‎Repetitive Shock in Corrugated Cardboard Packaging [Volume 7, Issue 2, 2021, Pages 820-830]
Abbès, Fazilay A FEM Multiscale Homogenization Procedure using Nanoindentation for High Performance Concrete [Volume 6, Issue 3, 2020, Pages 493-504]
Abbès, Fazilay Finite Element and Experimental Investigation on the Effect of ‎Repetitive Shock in Corrugated Cardboard Packaging [Volume 7, Issue 2, 2021, Pages 820-830]
Abbondanza, Dario Linear dynamic response of nanobeams accounting for higher gradient effects [Volume 2, Issue 2, 2016, Pages 54-64]
Abboudi, Said Numerical Study on Heat Transfer and Pressure Drop in a Mini-‎Channel with Corrugated Walls‎ [Volume 7, Issue 3, 2021, Pages 1306-1314]
Abboudi, Said Impact of the Narrowing System at Different Locations and ‎Heights on the Performance of a Plane Solar Collector [Volume 8, Issue 4, 2022, Pages 1445-1455]
Abd Alaal, Faisal E.I. Numerical Investigations of the Coupled Nonlinear Non-homogeneous Partial Differential Equations [Volume 8, Issue 3, 2022, Pages 1054-1064]
Abd-Alhameed, Raed A Haar Wavelet Collocation Method for Thermal Analysis of Porous Fin with Temperature-dependent Thermal Conductivity and Internal Heat Generation [Volume 3, Issue 3, 2017, Pages 185-191]
Abd-Alhameed, Raed Thermal Analysis of Convective-Radiative Fin with Temperature-Dependent Thermal Conductivity Using Chebychev Spectral Collocation Method [Volume 4, Issue 2, 2018, Pages 87-94]
Abdali, Sajad H. Automatic Structural Synthesis of Planetary Geared Mechanisms ‎using Graph Theory [Volume 9, Issue 2, 2023, Pages 384-403]
Abdali, Sajad H. The Structural Synthesis of Non-fractionated, Three-degree-of-freedom Planetary Gear Mechanisms [Volume 10, Issue 1, 2024, Pages 205-223]
Abdalla, Bahaaeldin Unsteady Separated Stagnation Point Flow of Nanofluid past a ‎Moving Flat Surface in the Presence of Buongiorno's Model [Volume 7, Issue 3, 2021, Pages 1283-1290]
Abdalla, Hassan Mohamed Abdelalim Direct Transcription Approach to Dynamic Optimization Problems in Engineering [Volume 8, Issue 2, 2022, Pages 605-616]
Abd Elazem, Nader Y. Efficacy of a Modulated Viscosity-dependent Temperature/nanoparticles Concentration Parameter on a ‎Nonlinear Radiative Electromagneto-nanofluid Flow along an Elongated Stretching Sheet [Volume 9, Issue 3, 2023, Pages 848-860]
Abdelmoumen Anis, Bousahla Buckling Analysis of Embedded Nanosize FG Beams Based on a Refined Hyperbolic Shear Deformation Theory [Volume 4, Issue 3, 2018, Pages 140-146]
Abd Hamid, Fatin Numerical Simulation of Fuzzy Volterra Integro-differential ‎Equation using Improved Runge-Kutta Method [Volume 9, Issue 1, 2023, Pages 72-82]
Abdul Gaffar, S. Viscoelastic Micropolar Convection Flows from an Inclined Plane with Nonlinear Temperature: A Numerical Study [Volume 6, Issue 2, 2020, Pages 183-199]
Abdul Gaffar, Shaik Melting Heat Transfer Analysis on Magnetohydrodynamics Buoyancy Convection in an Enclosure: A Numerical Study [Volume 6, Issue 1, 2020, Pages 52-62]
Abdul Gaffar, Shaik Polymeric Dissipative Convection Flow from an Inclined Plane with Chemical Reaction: Numerical Study [Volume 8, Issue 2, 2022, Pages 416-428]
Abdul Hakeem, A.K. Slip Effects on Ohmic Dissipative Non-Newtonian Fluid Flow in the Presence of Aligned Magnetic Field [Volume 6, Issue 2, 2020, Pages 296-306]
Abdul Hakeem, A.K. Three Dimensional Non-linear Radiative Nanofluid Flow over a Riga Plate [Volume 6, Issue 4, 2020, Pages 1012-1029]
Abdul Hakeem, A.K. Heat Transfer of Hybrid-nanofluids Flow Past a Permeable Flat Surface with Different Volume Fractions [Volume 8, Issue 1, 2022, Pages 21-35]
Abedanzadeh, Amir Economic Evaluation of Supplying Commercial Thermal Load by ‎a New CPVT System: A Case Study in Iran [Volume 9, Issue 2, 2023, Pages 371-383]
Abid, Chérifa Conjugate Mixed Convection in a Horizontal Cylindrical Duct under the Solid Shell Internal Heat Generation [Volume 7, Issue 2, 2021, Pages 587-597]
Abid, Mohamed Nonlinear Biodynamic Models of the Hand-arm System and ‎Parameters Identification using the Vibration Transmissibility or ‎the Driving-point Mechanical Impedance [Volume 7, Issue 2, 2021, Pages 944-955]
Abikan, Adam Computational Analysis of Turbulent Flow over a Bluff Body with ‎Drag Reduction Devices [Volume 6, Special Issue, 2020, Pages 1210-1219]
Abilkhair, Zhastalap Computational and Experimental Study of the Composite ‎Material for the Centrifugal Pump Impellers Manufacturing [Volume 8, Issue 4, 2022, Pages 1407-1421]
Abo-bakr, Rasha M. Static Buckling of 2D FG Porous Plates Resting on Elastic ‎Foundation based on Unified Shear Theories‎ [Volume 9, Issue 1, 2023, Pages 239-258]
Abo-Bakr, Ali Mohammed Ali On the Dynamics of the Logistic Delay Differential Equation with ‎Two Different Delays [Volume 7, Issue 2, 2021, Pages 442-449]
Abolhasani, Hormoz Twin Screw Expanders Profile Optimization Using Surrogate-‎Based Modelling [Volume 8, Issue 4, 2022, Pages 1141-1153]
Aborehab, Ali Miscellaneous Modeling Approaches and Testing of a Satellite Honeycomb Sandwich Plate [Volume 6, Special Issue, 2020, Pages 1084-1097]
Abouelregal, Ahmed Fractional Thermoelasticity Model of a 2D Problem of Mode-I Crack in a Fibre-Reinforced Thermal Environment [Volume 5, Issue 2, 2019, Pages 269-280]
Abouelregal, Ahmed Thermoelastic Vibration of Temperature-Dependent Nanobeams Due to Rectified Sine Wave Heating—A State Space Approach [Volume 5, Issue 2, 2019, Pages 299-310]
Abouelregal, Ahmed On Green and Naghdi Thermoelasticity Model without Energy Dissipation with Higher Order Time Differential and Phase-Lags [Volume 6, Issue 3, 2020, Pages 445-456]
Abouelregal, Ahmed Influence of Temperature Pulse on a Nickel Microbeams under Couple Stress Theory [Volume 6, Issue 4, 2020, Pages 777-787]
Abouelregal, Ahmed E. Thermoelastic Memory-dependent Responses to an Infinite Medium ‎with a Cylindrical Hole and Temperature-dependent Properties [Volume 7, Issue 2, 2021, Pages 870-882]
Abouelregal, Ahmed E. Thermoelastic Model with Higher-order Time-derivatives and Two Phase-lags for an Infinitely Long Cylinder under Initial Stress and Heat Source [Volume 7, Issue 1, 2021, Pages 277-291]
Abouelregal, Ahmed E. A Modified Thermoelastic Fractional Heat Conduction Model ‎with a Single-Lag and Two Different Fractional-Orders [Volume 7, Issue 3, 2021, Pages 1676-1686]
Abouelregal, Ahmed E. Thermoelastic Vibrations of Nonlocal Nanobeams Resting on a ‎Pasternak Foundation via DPL Model [Volume 7, Issue 1, 2021, Pages 34-44]
Aboutalebi, Mohammad Numerical Study on the Ferrofluid Droplet Splitting in a T-junction ‎with Branches of Unequal Widths using Asymmetric Magnetic Field‎ [Volume 9, Issue 2, 2023, Pages 357-370]
Abro, Kashif Ali Application of Atangana-Baleanu Fractional Derivative to ‎Carbon Nanotubes Based Non-Newtonian Nanofluid: ‎Applications in Nanotechnology [Volume 6, Special Issue, 2020, Pages 1260-1269]
Abtahi Mehrjardi, Seyed Ali Heat Transfer Improvement in a Thermal Energy Storage System ‎using Auxiliary Fluid Instead of Nano-PCM in an Inclined ‎Enclosure: A Comparative Study [Volume 9, Issue 2, 2023, Pages 475-486]
Abu-Hamdeh, Nidal MHD Double-Diffusive Natural Convection in a Closed Space ‎Filled with Liquid Metal: Mesoscopic Analysis [Volume 7, Issue 3, 2021, Pages 1448-1465]
Acho, Leonardo Predictive Control with Dynamic Hysteresis ‎Reference ‎Trajectory: Application to a Structural Base-‎Isolation ‎Model [Volume 7, Special Issue, 2021, Pages 1242-1251]
Adda Bedia, El Abbes Buckling Analysis of Embedded Nanosize FG Beams Based on a Refined Hyperbolic Shear Deformation Theory [Volume 4, Issue 3, 2018, Pages 140-146]
Addessi, Daniela Computational Enhancement of a Mixed 3D Beam Finite Element with Warping and Damage [Volume 8, Issue 1, 2022, Pages 260-281]
Adelaja, Adekunle Study of the Vibration Characteristics of SA 330 Helicopter Planetary Main Gearbox [Volume 9, Issue 4, 2023, Pages 1093-1106]
Adeleye, Olurotimi A. Dynamic Analysis of the Biomechanical Model of Head Load Impact Using Differential Transform Method [Volume 6, Issue 4, 2020, Pages 893-907]
Adeosun, Taofeeq A. Influence of Thermophysical Features on MHD Squeezed Flow of ‎Dissipative Casson Fluid with Chemical and Radiative Effects [Volume 7, Issue 4, 2021, Pages 1999-2009]
Adesanya, S.O. A Note on the Hydromagnetic Blasius Flow with Variable Thermal Conductivity [Volume 7, Issue 4, 2021, Pages 1925-1930]
Afshar, Omid Moving Least Squares Method and its Improvement: A Concise Review [Volume 7, Issue 2, 2021, Pages 883-889]
A G, Vijayakumar Effects of Thermal Diffusion and Radiation on Magnetohydrodynamic (MHD) Chemically Reacting Fluid Flow Past a Vertical Plate in a Slip Flow Regime [Volume 5, Issue 2, 2019, Pages 334-343]
Agarwal, Praveen Performance Analysis of Segmentation of Hyperspectral Images Based on Color Image Segmentation [Volume 3, Issue 2, 2017, Pages 144-149]
Agarwal, Ravi P. On Approximate Stationary Radial Solutions for a Class of Boundary Value Problems Arising in Epitaxial Growth Theory [Volume 6, Issue 4, 2020, Pages 713-734]
Agarwal, Ravi P. A Novel Approach to Compute the Numerical Solution of Variable Coefficient Fractional Burgers' Equation with Delay [Volume 7, Issue 3, 2021, Pages 1550-1564]
Agarwal, Ravi P. A New Taylor Series based Numerical Method: Simple, Reliable, and Promising [Volume 9, Issue 4, 2023, Pages 1122-1134]
Aghadavoudi, Farshid Nanostructure, Molecular Dynamics Simulation and Mechanical Performance of PCL Membranes Reinforced with Antibacterial Nanoparticles [Volume 7, Issue 4, 2021, Pages 1907-1915]
Agwa, Mohamed Vibration Analysis of Material Size-Dependent CNTs Using Energy Equivalent Model [Volume 4, Issue 2, 2018, Pages 75-86]
Ahangarpour, Ameneh A New Modified Hamilton-Crosser and Nan Models for Thermal ‎Conductivity of Different Lengths Carbon Nanotubes Water-‎based Nanofluids [Volume 8, Issue 3, 2022, Pages 831-837]
Ahmad, Aqeel Close Loop Design in Glucose Insulin Model with Effect of ‎Physical Exercise [Volume 7, Issue 2, 2021, Pages 478-485]
Ahmad, Bakhtiar Transient MHD Convective Flow of Fractional Nanofluid between Vertical Plates [Volume 5, Issue 4, 2019, Pages 592-602]
Ahmad, Hijaz Modified Variational Iteration Technique for the Numerical ‎Solution of Fifth Order KdV-type Equations [Volume 6, Special Issue, 2020, Pages 1220-1227]
Ahmad, Hijaz A Radial Basis Function Collocation Method for Space-dependent ‎Inverse Heat Problems [Volume 6, Special Issue, 2020, Pages 1187-1199]
Ahmad, Hijaz A Modified Thermoelastic Fractional Heat Conduction Model ‎with a Single-Lag and Two Different Fractional-Orders [Volume 7, Issue 3, 2021, Pages 1676-1686]
Ahmad, Hijaz Thermoelastic Modeling with Dual Porosity Interacting with an Inviscid Liquid [Volume 10, Issue 1, 2024, Pages 111-124]
Ahmad, Imtiaz Modified Variational Iteration Technique for the Numerical ‎Solution of Fifth Order KdV-type Equations [Volume 6, Special Issue, 2020, Pages 1220-1227]
Ahmad, Imtiaz A Radial Basis Function Collocation Method for Space-dependent ‎Inverse Heat Problems [Volume 6, Special Issue, 2020, Pages 1187-1199]
Ahmadi, Farshid Design, Analysis and Manufacturing of a Bone Cutting Ultrasonic Horn-Tool and Verification with Experimental Tests [Volume 8, Issue 2, 2022, Pages 438-447]
Ahmadi, Goodarz Effect of Inlet Air Locations on Particle Concentration using ‎Large Eddy Simulation based on Multi Relaxation Time Lattice ‎Boltzmann Method [Volume 7, Issue 4, 2021, Pages 1944-1955]
Ahmadi, Goodarz Optimization of Ventilation Register Locations for Reducing Suspended Particle Concentration Using the Taguchi Method [(Articles in Press)]
Ahmadi, Mohammad Hossein Hydrodynamic Behavior in Solar Oil Heat Exchanger Ducts Fitted ‎with Staggered Baffles and Fins [Volume 8, Issue 3, 2022, Pages 774-790]
Ahmadifar, Ahmad Experimental and Numerical Buckling Analysis of Carbon Fiber Composite Lattice Conical Structure before and after Lateral Impact [Volume 6, Issue 4, 2020, Pages 813-822]
Ahmadi Nadooshan, Afshin Power Law Nanofluid through Tapered Artery based on a ‎Consistent Couple Stress Theory [Volume 9, Issue 3, 2023, Pages 623-636]
Ahmad Pour, M. Thermal Buckling Analysis of Circular Bilayer Graphene Sheets Resting on an Elastic Matrix Based on Nonlocal Continuum Mechanics [Volume 7, Issue 4, 2021, Pages 1862-1877]
Ahmadzadehtalatapeh, Mohammd Optimization of Air Distribution Patterns by Arrangements of ‎Air Inlets and Outlets: Case Study of an Operating Room [Volume 8, Issue 3, 2022, Pages 809-830]
Ahmed, Arsalan Traveling Wave Solutions of 3D Fractionalized MHD Newtonian Fluid in Porous Medium with Heat Transfer [Volume 6, Issue 4, 2020, Pages 968-984]
Ahmed, Arsalan New Exact Traveling Wave Solutions for Fractional Order System ‎Describing the Second Grade Fluid through Medium with Heat ‎Transfer‎ [Volume 7, Issue 2, 2021, Pages 764-781]
Ahmed, Khaled I. Free Vibration Analysis of 2D Functionally Graded Strip Beam using Finite ‎Element Method‎ [Volume 8, Issue 4, 2022, Pages 1422-1430]
Ahmed, Munshoor A Kinetic Flux-vector Splitting Scheme for Two-layer Shallow Flow Model [Volume 8, Issue 3, 2022, Pages 1043-1053]
Ahmed, Najma Magnetohydrodynamic Free Convection Flows with Thermal Memory over a Moving Vertical Plate in Porous Medium [Volume 5, Issue 1, 2019, Pages 150-161]
Ahmed, Najma Transient MHD Convective Flow of Fractional Nanofluid between Vertical Plates [Volume 5, Issue 4, 2019, Pages 592-602]
Ahmed, Naveed Jeffery Hamel Flow of a non-Newtonian Fluid [Volume 2, Issue 1, 2016, Pages 21-28]
Ahmed, Sahin Theoretical Investigation of Viscosity and Thermal Conductivity ‎of a Gas along a Non-isothermal Vertical Surface in Porous ‎Environment with Dissipative Heat: Numerical Technique [Volume 8, Issue 4, 2022, Pages 1236-1245]
Ahmed Houari, Mohammed Sid Buckling Analysis of Embedded Nanosize FG Beams Based on a Refined Hyperbolic Shear Deformation Theory [Volume 4, Issue 3, 2018, Pages 140-146]
AID, Abdelkrim Biomechanical Evaluation of Bone Quality Effect on Stresses at Bone-Implant Interface: A Finite Element Study [Volume 7, Issue 3, 2021, Pages 1266-1275]
Ajorkar, Abbas Design of an Adaptive-Neural Network Attitude Controller of a Satellite using Reaction Wheels [Volume 1, Issue 2, 2015, Pages 67-73]
AKANO, Theddeus T. Deformation Characteristics of Composite Structures [Volume 2, Issue 3, 2016, Pages 174-191]
Akbari, Reza Thermal-Hydraulics analysis of pressurized water reactor core by using single heated channel model [Volume 3, Issue 3, 2017, Pages 192-198]
Akbas, Seref Doguscan Application of Newmark Average Acceleration and Ritz Methods ‎on Dynamical Analysis of Composite Beams under a Moving Load [Volume 8, Issue 2, 2022, Pages 764-773]
Akbaş, Şeref Doğuşcan Vibration and Static Analysis of Functionally Graded Porous Plates [Volume 3, Issue 3, 2017, Pages 199-207]
Akbaş, Şeref Doğuşcan Hygro-Thermal Nonlinear Analysis of a Functionally Graded Beam [Volume 5, Issue 2, 2019, Pages 477-485]
Akbaş, Şeref Doğuşcan Forced Vibration Responses of Axially Functionally Graded ‎Beams by using Ritz Method [Volume 7, Issue 1, 2021, Pages 109-115]
Akgöz, Bekir Deflection of a hyperbolic shear deformable microbeam under a concentrated load [Volume 2, Issue 2, 2016, Pages 65-73]
Akgöz, Bekir Application of Newmark Average Acceleration and Ritz Methods ‎on Dynamical Analysis of Composite Beams under a Moving Load [Volume 8, Issue 2, 2022, Pages 764-773]
Akgöz, Bekir A Novel Approach to Fully Nonlinear Mathematical Modeling of ‎Tectonic Plates [Volume 9, Issue 2, 2023, Pages 430-444]
Akgül, Ali Effects of Non-Linear Thermal Radiation and Chemical Reaction ‎on Time Dependent Flow of Williamson Nanofluid With Combine ‎Electrical MHD and Activation Energy [Volume 7, Issue 2, 2021, Pages 546-558]
Akgül, Ali Close Loop Design in Glucose Insulin Model with Effect of ‎Physical Exercise [Volume 7, Issue 2, 2021, Pages 478-485]
Akgül, Ali Solving Duffing-Van der Pol Oscillator Equations of Fractional ‎Order by an Accurate Technique [Volume 7, Issue 3, 2021, Pages 1480-1487]
Akhmedov, Natig K. Axisymmetric Problem of the Elasticity Theory for the Radially ‎Inhomogeneous Cylinder with a Fixed Lateral Surface [Volume 7, Issue 2, 2021, Pages 598-610]
Akhmetzhanov, Maxat Regularization of the Movement of a Material Point Along a Flat ‎Trajectory: Application to Robotics Problems [Volume 7, Issue 3, 2021, Pages 1726-1736]
Akhtar, Imran VIV Control Strategies Using Displacement-Based ‎Phenomenological Model [Volume 7, Special Issue, 2021, Pages 1090-1097]
Akinshilo, Akin T Perturbation Solutions for the Study of MHD Blood as a Third Grade Nanofluid Transporting Gold Nanoparticles through a Porous Channel [Volume 3, Issue 2, 2017, Pages 103-113]
Akinshilo, Akinbowale T. Heat Transfer Analysis of Nanofluid Flow with Porous Medium through Jeffery Hamel Diverging/Converging Channel [Volume 6, Issue 3, 2020, Pages 433-444]
Akinshilo, Akinbowale T. Thermal Analysis of Radiating Film Flow of Sodium Alginate ‎using MWCNT Nanoparticles ‎ [Volume 8, Issue 1, 2022, Pages 219-231]
Akinshilo, Akin T. Flow and Heat Transfer Analysis of the Sodium Alginate Conveying Copper Nanoparticles between Two Parallel Plates [Volume 3, Issue 4, 2017, Pages 258-266]
Akolade, Mojeed T. Influence of Thermophysical Features on MHD Squeezed Flow of ‎Dissipative Casson Fluid with Chemical and Radiative Effects [Volume 7, Issue 4, 2021, Pages 1999-2009]
Akram, Safia On Stokes' Second Problem for Burgers' Fluid over a Plane Wall [Volume 7, Issue 3, 2021, Pages 1514-1526]
Akter, Aysha Heat Transfer Enhancement and Boundary Layer Separations for ‎a Hybrid Nanofluid Flow past an Isothermal Cylinder [Volume 7, Issue 4, 2021, Pages 2096-2112]
Akzhigitov, Dulat Structural and Aerodynamical Parametric Study of Truss-Core ‎Gas Turbine Rotor Blade [Volume 7, Issue 2, 2021, Pages 831-838]
Alaluf, David Precision Shape Control of Ultra-thin Shells with Strain Actuators [Volume 7, Special Issue, 2021, Pages 1130-1137]
Alam, Md Nur Heat Transport Exploration of Free Convection Flow inside ‎Enclosure Having Vertical Wavy Walls [Volume 7, Issue 2, 2021, Pages 520-527]
Alam, Md. Nur An analytical Technique for Solving New Computational ‎Solutions of the Modified Zakharov-Kuznetsov ‎Equation Arising ‎in Electrical Engineering [Volume 7, Issue 2, 2021, Pages 715-726]
Alandoli, Esmail Ali Robust P-H∞ Integrated Controller for Flexible Link Manipulator ‎System in the Presence of Disturbance [Volume 7, Issue 2, 2021, Pages 646-654]
Alaofi, Z.M. Numerical Investigations of the Coupled Nonlinear Non-homogeneous Partial Differential Equations [Volume 8, Issue 3, 2022, Pages 1054-1064]
Al-Asad, Md. Fayz - Heat Transport Exploration of Free Convection Flow inside ‎Enclosure Having Vertical Wavy Walls [Volume 7, Issue 2, 2021, Pages 520-527]
Al-Asad, Md. Fayz An analytical Technique for Solving New Computational ‎Solutions of the Modified Zakharov-Kuznetsov ‎Equation Arising ‎in Electrical Engineering [Volume 7, Issue 2, 2021, Pages 715-726]
AlBaiti, Saleh On the Usefulness of Pre-processing Methods in Rotating ‎Machines Faults Classification using Artificial Neural Network [Volume 7, Issue 1, 2021, Pages 254-261]
Al-Chlaihawi, Murtadha J. Bifurcation of Fiber-Reinforced Cylindrical Membranes under ‎Extension, Inflation, and Swelling [Volume 9, Issue 1, 2023, Pages 113-128]
Aldabergen, Abilkhairkhan Structural and Aerodynamical Parametric Study of Truss-Core ‎Gas Turbine Rotor Blade [Volume 7, Issue 2, 2021, Pages 831-838]
Al Dulaimi, Zaid M. Local Thermal Non-equilibrium Analysis of Cu-Al2O3 Hybrid ‎Nanofluid Natural Convection in a Partially Layered Porous ‎Enclosure with Wavy Walls [Volume 9, Issue 3, 2023, Pages 712-727]
Ale Ali, Nassim Effect of thermoelastic damping in nonlinear beam model of MEMS resonators by differential quadrature method [Volume 1, Issue 3, 2015, Pages 112-121]
Ale Ali, Nassim Time integration of rectangular membrane free vibration using spline-based differential quadrature [Volume 2, Issue 2, 2016, Pages 74-79]
Aleksandrov, Alexander Yu. Stability Analysis of Gyroscopic Systems with Delay under ‎Synchronous and Asynchronous Switching [Volume 8, Issue 3, 2022, Pages 1113-1119]
Aleksandrov, Alexander Y. Nonlinear Control for Attitude Stabilization of a Rigid Body ‎Forced by Nonstationary Disturbances with Zero Mean Values [Volume 7, Issue 2, 2021, Pages 790-797]
Aleksandrov, A.Yu. Natural Magneto-velocity Coordinate System for Satellite ‎Attitude Stabilization: Dynamics and Stability Analysis [Volume 9, Issue 2, 2023, Pages 513-520]
Al-Falahi, Amir Two-Dimensional Numerical Study of the Transient Flow ‎Conditions in Complete Shock Tunnel‎ [Volume 7, Issue 2, 2021, Pages 956-964]
Alfaqeih, Suliman Conformable Double Sumudu Transform with Applications [Volume 7, Issue 2, 2021, Pages 578-586]
Alghafis, Abdullah Design Optimization and Experimental Validation of Low-Cost ‎Flat Plate Collector Under Central Qasssim Climate [Volume 7, Issue 2, 2021, Pages 811-819]
Al-Griffi, Takia Ahmed J. Analytical Investigations for the Joint Impacts of Electro-osmotic and Some Relevant Parameters to Blood Flow in Mildly Stenosis Artery [Volume 9, Issue 1, 2023, Pages 274-293]
Al-Griffi, Takia Ahmed J. Analytical Simulation for Transient Natural Convection in a ‎Horizontal Cylindrical Concentric Annulus [Volume 7, Issue 2, 2021, Pages 621-637]
Ali, Aamir Third-grade Fluid Flow of Stretching Cylinder with Heat Source/Sink [Volume 6, Special Issue, 2020, Pages 1125-1132]
Ali, Fadi Numerical Study on Subsurface Stress in Hertzian Contacts under Pure Sliding Conditions [Volume 6, Special Issue, 2020, Pages 1098-1106]
Ali, Hafiz M. Heat Transfer Analysis of Nanofluid Flow with Porous Medium through Jeffery Hamel Diverging/Converging Channel [Volume 6, Issue 3, 2020, Pages 433-444]
Ali, Mohamed R. The Method of Lines Analysis of Heat Transfer of Ostwald-de Waele Fluid Generated by a Non-uniform Rotating Disk with a Variable Thickness [Volume 7, Issue 2, 2021, Pages 432-441]
Ali, Muhammad Awais On the Usefulness of Pre-processing Methods in Rotating ‎Machines Faults Classification using Artificial Neural Network [Volume 7, Issue 1, 2021, Pages 254-261]
Ali, Zeeshan Numerical Simulation of Fuzzy Volterra Integro-differential ‎Equation using Improved Runge-Kutta Method [Volume 9, Issue 1, 2023, Pages 72-82]
Aliasghary, Mortaza Pull-in Phenomenon in the Electrostatically Micro-switch ‎Suspended between Two Conductive Plates using the Artificial ‎Neural Network [Volume 8, Issue 4, 2022, Pages 1222-1235]
Aliev, Fikret A Solution of the Problem of Analytical Construction of Optimal ‎Regulators for a Fractional Order Oscillatory System in the ‎General Case [Volume 7, Issue 2, 2021, Pages 970-976]
Aliev, Fikret A. Larin Parameterization to Solve the Problem of Analytical ‎Construction of the Optimal Regulator of Oscillatory Systems ‎with Liquid Dampers [Volume 6, Special Issue, 2020, Pages 1426-1430]
Aliev, Fikret A. Algorithm for Determining the Permeability and Compaction ‎Properties of a Gas Condensate Reservoir based on a Binary Model [Volume 8, Issue 3, 2022, Pages 1014-1022]
Aliev, Nihan A Solution of the Problem of Analytical Construction of Optimal ‎Regulators for a Fractional Order Oscillatory System in the ‎General Case [Volume 7, Issue 2, 2021, Pages 970-976]
Aliev, Nihan A. Larin Parameterization to Solve the Problem of Analytical ‎Construction of the Optimal Regulator of Oscillatory Systems ‎with Liquid Dampers [Volume 6, Special Issue, 2020, Pages 1426-1430]
Ali-Kayiem, Hussain H. Assessment of the Turbine Location for Optimum Performance of the Solar Vortex Engine as a Replacement to the Tall Chimney Solar Updraft Power Plant Design [Volume 10, Issue 1, 2024, Pages 38-54]
Ali Shah, Nehad Magnetohydrodynamic Free Convection Flows with Thermal Memory over a Moving Vertical Plate in Porous Medium [Volume 5, Issue 1, 2019, Pages 150-161]
Ali Shah, Nehad Transient MHD Convective Flow of Fractional Nanofluid between Vertical Plates [Volume 5, Issue 4, 2019, Pages 592-602]
Alizadeh, Ali A Modified Couple Stress-Based Model for the Nonlinear ‎Vibrational Analysis of Nano-Disks Using Multiple Scales Method [Volume 8, Issue 2, 2022, Pages 580-596]
Alizadeh Kharkeshi, Behrad Numerical Study of the Hydrodynamic Behavior of an Archimedes Screw Turbine by Experimental Data in order to Optimize Turbine Performance: The Genetic Algorithm [Volume 9, Issue 4, 2023, Pages 1060-1075]
Aljibori, Hakim S. Sultan Two-Dimensional Numerical Study of the Transient Flow ‎Conditions in Complete Shock Tunnel‎ [Volume 7, Issue 2, 2021, Pages 956-964]
Al-Jumaili, Safaa On the Use of Acoustic Emission and Digital Image Correlation for Welded Joints Damage Characterization [Volume 5, Issue 2, 2019, Pages 381-389]
Allahverdi, Jafarov Algorithm for Determining the Permeability and Compaction ‎Properties of a Gas Condensate Reservoir based on a Binary Model [Volume 8, Issue 3, 2022, Pages 1014-1022]
Alluguvelli, Ramesh Effect of Chemical Reaction on Bioconvective Flow in Oxytactic Microorganisms Suspended Porous Cavity [Volume 6, Issue 3, 2020, Pages 653-664]
Al-Mdallal, Qasem M. Unsteady Separated Stagnation Point Flow of Nanofluid past a ‎Moving Flat Surface in the Presence of Buongiorno's Model [Volume 7, Issue 3, 2021, Pages 1283-1290]
Almeida, Luís Philipe Ribeiro Analysis of High-order Approximations by Spectral Interpolation Applied to One- and Two-dimensional Finite Element Method [Volume 6, Issue 1, 2020, Pages 145-159]
Almeida, Raquel Numerical Analysis on the Bond Performance of Different ‎Anchored Joints under Monotonic and Cyclic Pull-push Loading [Volume 8, Issue 1, 2022, Pages 388-404]
Almitani, Khalid H. Buckling Behaviors of Symmetric and Antisymmetric Functionally Graded Beams [Volume 4, Issue 2, 2018, Pages 115-124]
Al-Muslimawi, Alaa H. Numerical Simulation of Non-Newtonian Inelastic Flows in Channel based on Artificial Compressibility Method [Volume 6, Issue 2, 2020, Pages 271-283]
Alnemrawi, Bara’a R. Prediction of Interface Shear Strength of Heat Damaged Shear-keys using Nonlinear Finite Element Analysis [Volume 9, Issue 4, 2023, Pages 1000-1015]
Al-Rousan, Rajai Z. Prediction of Interface Shear Strength of Heat Damaged Shear-keys using Nonlinear Finite Element Analysis [Volume 9, Issue 4, 2023, Pages 1000-1015]
Al-Saif, Abdul-Sattar Perturbation-Iteration Algorithm for Solving Heat and Mass Transfer in the Unsteady Squeezing Flow between Parallel Plates [Volume 5, Issue 4, 2019, Pages 804-815]
Al-Saif, Abdul-Sattar J. Analytical Investigations for the Joint Impacts of Electro-osmotic and Some Relevant Parameters to Blood Flow in Mildly Stenosis Artery [Volume 9, Issue 1, 2023, Pages 274-293]
Al-Saif, A.S.J. Analytical Simulation for Transient Natural Convection in a ‎Horizontal Cylindrical Concentric Annulus [Volume 7, Issue 2, 2021, Pages 621-637]
Alsakarneh, Amjad Impact Dynamics of Nonlinear Materials: FE Analysis [Volume 9, Issue 3, 2023, Pages 728-738]
Alsyouf, Imad On the Usefulness of Pre-processing Methods in Rotating ‎Machines Faults Classification using Artificial Neural Network [Volume 7, Issue 1, 2021, Pages 254-261]
Alvarez, Luis F. A Reduced-Order Simulation Methodology for Nanosecond-Pulsed Plasmas in a Backward-Facing ‎Step Supersonic Combustor Configuration [Volume 9, Issue 1, 2023, Pages 181-194]
Al-Zahrani, Meshal A. Free Vibration Analysis of 2D Functionally Graded Strip Beam using Finite ‎Element Method‎ [Volume 8, Issue 4, 2022, Pages 1422-1430]
Alzghoul, Ahmad On the Usefulness of Pre-processing Methods in Rotating ‎Machines Faults Classification using Artificial Neural Network [Volume 7, Issue 1, 2021, Pages 254-261]
Amanulla, CH. Magneto Casson-Carreau Fluid Flow through a Circular Porous ‎Cylinder with Partial Slip‎ [Volume 8, Issue 4, 2022, Pages 1208-1221]
Amaral, Rodrigo Reis Proportional Topology Optimization under ‎Reliability-based Constraints [Volume 8, Issue 1, 2022, Pages 319-330]
Amaral, Rodrigo Reis A Novel BESO Methodology for Topology Optimization of ‎Reinforced Concrete Structures: A Two-loop Approach [Volume 9, Issue 2, 2023, Pages 498-512]
Ameijeiras, Mariano P. Quasi-bifurcation and Imperfection-sensitivity of Cylindrical ‎Shells under Pressures due to an Explosion [Volume 7, Issue 2, 2021, Pages 984-992]
Ameur, Houari Effect of Corrugated Baffles on the Flow and Thermal Fields in a Channel Heat Exchanger [Volume 6, Issue 2, 2020, Pages 209-218]
Ameur, Houari Thermal-Aerodynamic Performance Measurement of Air Heat ‎Transfer Fluid Mechanics over S-shaped Fins in Shell-and-tube ‎Heat Exchangers [Volume 7, Issue 4, 2021, Pages 1931-1943]
Ameur, Houari Hydrodynamic Behavior in Solar Oil Heat Exchanger Ducts Fitted ‎with Staggered Baffles and Fins [Volume 8, Issue 3, 2022, Pages 774-790]
Amini, Yasser Thermal Performance of Oscillating Blade with Various ‎Geometries in a Straight Channel [Volume 8, Issue 1, 2022, Pages 114-128]
Amiri, Saeed Reduction in Space for Dynamic Finite Element Analysis of Assemblies of Beam-columns when the Mass is Available in Digitized Format [Volume 8, Issue 1, 2022, Pages 71-83]
Amiri Delouei, Amin Mesoscopic Simulation of Forced Convective Heat Transfer of Carreau-Yasuda Fluid Flow over an Inclined Square: Temperature-dependent Viscosity [Volume 6, Issue 2, 2020, Pages 307-319]
Amiri Delouei, Amin Effect of Inlet Air Locations on Particle Concentration using ‎Large Eddy Simulation based on Multi Relaxation Time Lattice ‎Boltzmann Method [Volume 7, Issue 4, 2021, Pages 1944-1955]
Amiri Delouei, Amin Optimization of Spark Ignition Engine Performance using a New ‎Double Intake Manifold: Experimental and Numerical Analysis [Volume 9, Issue 1, 2023, Pages 1-14]
Amiri Delouei, Amin An Exact Analytical Solution for Heat Conduction in a ‎Functionally Graded Conical Shell [Volume 9, Issue 2, 2023, Pages 302-317]
Amiri Delouei, Amin Optimization of Ventilation Register Locations for Reducing Suspended Particle Concentration Using the Taguchi Method [(Articles in Press)]
Amirsalari, Behzad Optimum Design of Liquified Natural Gas Bi-lobe Tanks using Finite Element, Genetic Algorithm and Neural Network [Volume 6, Issue 4, 2020, Pages 862-877]
Ammar, HAIAHEM Heat Transfer in Hydro-Magnetic Nano-Fluid Flow between Non-Parallel Plates Using DTM [Volume 4, Issue 4, 2018, Pages 352-364]
Analooee, Ali Time Distance: A Novel Collision Prediction and Path Planning Method [Volume 9, Issue 3, 2023, Pages 656-677]
Anaya, Maribel Manifold Learning Algorithms Applied to Structural Damage ‎Classification [Volume 7, Special Issue, 2021, Pages 1158-1166]
Anbalagan, Satheesh MHD Double-Diffusive Natural Convection in a Closed Space ‎Filled with Liquid Metal: Mesoscopic Analysis [Volume 7, Issue 3, 2021, Pages 1448-1465]
Anghel, Ion The Permutation Entropy and its Applications on Fire Tests Data [Volume 6, Special Issue, 2020, Pages 1380-1393]
Animasaun, I.L. Exploration of the Significance of Autocatalytic Chemical Reaction and Cattaneo-Christov Heat Flux on the Dynamics of a Micropolar Fluid [Volume 6, Issue 1, 2020, Pages 77-89]
Anjum, Asia On Stokes' Second Problem for Burgers' Fluid over a Plane Wall [Volume 7, Issue 3, 2021, Pages 1514-1526]
Anjum, Naveed Two Modifications of the Homotopy Perturbation Method for ‎Nonlinear Oscillators [Volume 6, Special Issue, 2020, Pages 1420-1425]
Anjum, Naveed A Variational Principle for a Nonlinear Oscillator Arising in the ‎Microelectromechanical System [Volume 7, Issue 1, 2021, Pages 78-83]
Anjum, Naveed A Brief Review on the Asymptotic Methods for the Periodic ‎Behaviour of Microelectromechanical Systems [Volume 8, Issue 3, 2022, Pages 1120-1140]
Anki Reddy, P.B. Numerical Simulations of Unsteady 3D MHD Micropolar Fluid Flow over a Slendering Sheet [Volume 7, Issue 3, 2021, Pages 1403-1412]
Ansari, Md. S. A Paired Quasi-linearization on Magnetohydrodynamic Flow and Heat Transfer of Casson Nanofluid with Hall Effects [Volume 5, Issue 5, 2019, Pages 849-860]
Ansari, Md.S. Magnetohydrodynamic Bio-convective Casson Nanofluid Flow: A Numerical Simulation by Paired Quasilinearisation [Volume 7, Issue 4, 2021, Pages 2024-2039]
Ansarifard, Ali Akbar An investigation the effects of geometric tolerances on the natural frequencies of rotating shafts [Volume 1, Issue 2, 2015, Pages 103-111]
Antonov, Dmitrii V. ‎2D Planar Simulation of Collisions between Liquid Droplets and ‎Solid Particles in a Gas [Volume 9, Issue 3, 2023, Pages 678-694]
Antypov, Ievgen Numerical Modeling of Heat Transfer and Hydrodynamics in Compact Shifted Arrangement Small Diameter Tube Bundles [Volume 7, Issue 1, 2021, Pages 292-301]
Antypov, Ievgen Experimental and Numerical Investigation of Heat and Mass ‎Transfer Processes for Determining the Optimal Design of an ‎Accumulator with Phase Transformations [Volume 7, Issue 2, 2021, Pages 611-620]
Anwar Bég, Osman Non-similar Radiative Bioconvection Nanofluid Flow under ‎Oblique Magnetic Field with Entropy Generation‎ [Volume 8, Issue 1, 2022, Pages 206-218]
Anwar Beg, Osman Melting Heat Transfer Analysis on Magnetohydrodynamics Buoyancy Convection in an Enclosure: A Numerical Study [Volume 6, Issue 1, 2020, Pages 52-62]
Apuzzo, Andrea Axial and Torsional Free Vibrations of Elastic Nano-Beams by Stress-Driven Two-Phase Elasticity [Volume 5, Issue 2, 2019, Pages 402-413]
Arab Ameri, Maryam Moving Mesh Non-standard Finite Difference Method for Non-linear Heat Transfer in a Thin Finite Rod [Volume 4, Issue 3, 2018, Pages 161-166]
Arab Ameri, Maryam High Order Compact Finite Difference Schemes for Solving Bratu-Type Equations [Volume 5, Issue 1, 2019, Pages 91-102]
Arabi, E. On the Geometrically Nonlinear Analysis of Composite Axisymmetric Shells [Volume 4, Special Issue: Applied and Computational Issues in Structural Engineering, 2018, Pages 402-419]
Arbie, M. Rizqie Two-Solid Deposition in Fluid Column using Immersed ‎Boundary-Lattice Boltzmann Method [Volume 7, Issue 3, 2021, Pages 1814-1825]
Arciniega, R.A. On Bending Response of Doubly Curved Laminated Composite Shells Using Hybrid Refined Models [Volume 5, Issue 5, 2019, Pages 875-899]
Arciniega, RA Generalized 2-Unknown’s HSDT to Study Isotropic and Orthotropic Composite Plates [Volume 5, Issue 1, 2019, Pages 141-149]
Arciniega, RA Bending and Free Vibration Analysis of Functionally Graded Plates via Optimized Non-polynomial Higher Order Theories [Volume 5, Issue 2, 2019, Pages 281-298]
Arefi, Mohammad Lamb Wave Analysis in Anisotropic Multilayer ‎Piezoelectric-piezomagnetic Material [Volume 8, Issue 2, 2022, Pages 629-640]
Argyridi, Amalia Generalized Warping In Flexural-Torsional Buckling Analysis of Composite Beams [Volume 2, Issue 3, 2016, Pages 152-173]
Arhamnamazi, Seyyed Abbas Accuracy Assessment of Ultrasonic C-scan and X-ray Radiography Methods for Impact Damage Detection in Glass Fiber Reinforced Polyester Composites [Volume 5, Issue 2, 2019, Pages 258-268]
Ariaei, Alireza Vibration analysis of a rotating closed section composite Timoshenko beam by using differential transform method [Volume 1, Issue 4, 2015, Pages 181-186]
Asadi, Tahereh The Development and Application of the RCW Method for the Solution of the Blasius Problem [Volume 6, Issue 1, 2020, Pages 105-111]
Asako, Yutaka Moving Least Squares Method and its Improvement: A Concise Review [Volume 7, Issue 2, 2021, Pages 883-889]
Asghar, Saleem Third-grade Fluid Flow of Stretching Cylinder with Heat Source/Sink [Volume 6, Special Issue, 2020, Pages 1125-1132]
Ashiq, Alina A Brief Review on the Asymptotic Methods for the Periodic ‎Behaviour of Microelectromechanical Systems [Volume 8, Issue 3, 2022, Pages 1120-1140]
Ashjaee, Mehdi Numerical Investigation on Slot air Jet impingement Heat Transfer between Horizontal Concentric Circular Cylinders [Volume 1, Issue 2, 2015, Pages 74-82]
Ashorynejad, Hamid Reza Temperature Effect on Moving Water Droplets at the Channel of ‎PEMFC by Multi-component Multiphase Lattice Boltzmann Method [Volume 9, Issue 3, 2023, Pages 607-622]
Asiri, Saeed A. Free Vibration Analysis of 2D Functionally Graded Strip Beam using Finite ‎Element Method‎ [Volume 8, Issue 4, 2022, Pages 1422-1430]
Asjad, Muhammad Imran Effects of Non-Linear Thermal Radiation and Chemical Reaction ‎on Time Dependent Flow of Williamson Nanofluid With Combine ‎Electrical MHD and Activation Energy [Volume 7, Issue 2, 2021, Pages 546-558]
Askari, Nematollah Prediction of Entrance Length for Magnetohydrodynamics Channels Flow using Numerical simulation and Artificial Neural Network [Volume 6, Issue 3, 2020, Pages 582-592]
Askari, Nematollah Magnetohydrodynamics Fluid Flow and Heat Transfer over a Permeable Shrinking Sheet with Joule dissipation: Analytical Approach [Volume 6, Issue 4, 2020, Pages 999-1011]
Askin, Mustafa Yunus Theory and Experiment in Predicting the Strength of Hybrid ‎Fiber Metal Laminates [Volume 9, Issue 4, 2023, Pages 987-999]
Asroun, Aïssa A FEM Multiscale Homogenization Procedure using Nanoindentation for High Performance Concrete [Volume 6, Issue 3, 2020, Pages 493-504]
Assie, Amr E. Static Buckling of 2D FG Porous Plates Resting on Elastic ‎Foundation based on Unified Shear Theories‎ [Volume 9, Issue 1, 2023, Pages 239-258]
Astaraki, Abdolreza Experimental and Numerical Investigations on the Effect of Rectangular Openings’ Aspect Ratio on Outflow Discharge [Volume 4, Special Issue: Applied and Computational Issues in Structural Engineering, 2018, Pages 457-466]
Atangana, Abdon MHD Oldroyd-B Fluid with Slip Condition in view of Local and ‎Nonlocal Kernels [Volume 7, Issue 1, 2021, Pages 116-127]
Atashafrooz, Meysam The Development and Application of the RCW Method for the Solution of the Blasius Problem [Volume 6, Issue 1, 2020, Pages 105-111]
Atta, Doaa Thermal Diffusion Responses in an Infinite Medium with a ‎Spherical Cavity using the Atangana-Baleanu Fractional ‎Operator [Volume 8, Issue 4, 2022, Pages 1358-1369]
Attaran, Behrooz Bearing Fault Detection Based on Maximum Likelihood Estimation and Optimized ANN Using the Bees Algorithm [Volume 1, Issue 1, 2015, Pages 35-43]
Attia, Nourhane Solving Duffing-Van der Pol Oscillator Equations of Fractional ‎Order by an Accurate Technique [Volume 7, Issue 3, 2021, Pages 1480-1487]
AUFRAY, Maëlenn Using the Finite Element Analysis Method to Study the 3-point Bending Test for the Characterization of the Adherence [Volume 6, Issue 3, 2020, Pages 505-516]
Aulin, Viktor The Dynamics of the Working Body of the Tubular Conveyor with ‎the Chain Drive [Volume 7, Issue 3, 2021, Pages 1710-1718]
Avazzadeh, Zakieh Haar Wavelet Method for Solving High-Order Differential Equations with Multi-Point Boundary Conditions [Volume 8, Issue 2, 2022, Pages 528-544]
Avcar, Mehmet Free Vibration Analysis of FG Porous Sandwich Plates under ‎Various Boundary Conditions [Volume 7, Issue 2, 2021, Pages 505-519]
Avci, Onur Temperature Dependent Damping in Additively Manufactured ‎Polymer Structures [Volume 7, Special Issue, 2021, Pages 993-1008]
AVEY, Mahmure Nonlinear Dynamic Behavior of Hyperbolic Paraboloidal Shells ‎Reinforced by Carbon Nanotubes with Various Distributions [Volume 7, Issue 2, 2021, Pages 913-921]
Awad, Mohamed M. Theoretical Analysis of the Motorcycle Front Brake Heating ‎Process during High Initial Speed Emergency Braking [Volume 6, Special Issue, 2020, Pages 1431-1437]
Awais, Muhammad Third-grade Fluid Flow of Stretching Cylinder with Heat Source/Sink [Volume 6, Special Issue, 2020, Pages 1125-1132]
Awrejcewicz, Jan Analysis of Free Vibration of Porous Power-law and Sigmoid Functionally Graded Sandwich Plates by the R-functions Method [Volume 9, Issue 4, 2023, Pages 1144-1155]
Awwad, Essam Thermoelastic Memory-dependent Responses to an Infinite Medium ‎with a Cylindrical Hole and Temperature-dependent Properties [Volume 7, Issue 2, 2021, Pages 870-882]
Ayaz, Muhammad Comparative Study of Plane Poiseuille Flow of Non-isothermal ‎Couple ‎Stress Fluid of Reynold Viscosity Model using Optimal ‎Homotopy ‎Asymptotic Method and New Iterative Method [Volume 7, Issue 2, 2021, Pages 404-414]
Aydogdu, Ibrahim Optimum Design of Nano-Scaled Beam Using the Social Spider Optimization (SSO) Algorithm [Volume 7, Issue 3, 2021, Pages 1348-1361]
Aymerich, Francesco Accuracy Assessment of Ultrasonic C-scan and X-ray Radiography Methods for Impact Damage Detection in Glass Fiber Reinforced Polyester Composites [Volume 5, Issue 2, 2019, Pages 258-268]
Azadi, Shahram A Comparative Study on the Efficiency of Compiled Languages ‎and MATLAB/Simulink for Simulation of Highly Nonlinear ‎Automotive Systems [Volume 8, Issue 3, 2022, Pages 853-864]
Azadi, Shahram A Novel Flexible Lane Changing (FLC) Method in Complicated ‎Dynamic Environment for Automated Vehicles [Volume 9, Issue 2, 2023, Pages 318-331]
Azadi, Shahram Time Distance: A Novel Collision Prediction and Path Planning Method [Volume 9, Issue 3, 2023, Pages 656-677]
Azargoman, Majid Modeling of Weld Bead Geometry Using Adaptive Neuro-Fuzzy Inference System (ANFIS) in Additive Manufacturing [Volume 6, Issue 1, 2020, Pages 160-170]
Azargoman, Majid A Hybrid SVM-RVM Algorithm to Mechanical Properties in the Friction Stir Welding Process [Volume 8, Issue 1, 2022, Pages 36-47]
Azimi, Amir H. A Note on the Discharge over Full-width Rectangular Sharp-‎crested Weirs and Weirs of Finite Crest Length‎ [Volume 9, Issue 2, 2023, Pages 458-463]
Azimi, Arash Numerical Investigation on Slot air Jet impingement Heat Transfer between Horizontal Concentric Circular Cylinders [Volume 1, Issue 2, 2015, Pages 74-82]
Azimova, Dinara Regularization of the Movement of a Material Point Along a Flat ‎Trajectory: Application to Robotics Problems [Volume 7, Issue 3, 2021, Pages 1726-1736]
Azizi, A. Low Velocity Impact Response of Laminated Composite Truncated Sandwich Conical Shells with Various Boundary Conditions Using Complete Model and GDQ Method [Volume 3, Issue 1, 2017, Pages 1-15]
Azzi, Ahmed Analysis of Fluid Dynamics and Heat Transfer in a Rectangular Duct with Staggered Baffles [Volume 5, Issue 2, 2019, Pages 231-248]
Azzi, Ahmed The Solar Air Channels: Comparative Analysis, Introduction of Arc-shaped Fins to Improve the Thermal Transfer [Volume 5, Issue 4, 2019, Pages 616-626]
Azzi, Ahmed Fluid Flow and Heat Transfer over Staggered ꞌ+ꞌ Shaped Obstacles [Volume 6, Issue 4, 2020, Pages 741-756]
AZZI, Ahmed A Review of Solar Energy Collectors: Models and Applications [Volume 4, Issue 4, 2018, Pages 375-401]

B

Babanli, Mustafa Theory and Experiment in Predicting the Strength of Hybrid ‎Fiber Metal Laminates [Volume 9, Issue 4, 2023, Pages 987-999]
Babeshko, O.M. About Earthquakes in Subduction Zones with the Potential to ‎Cause a Tsunami [Volume 7, Special Issue, 2021, Pages 1232-1241]
Babeshko, Vladimir A. About Earthquakes in Subduction Zones with the Potential to ‎Cause a Tsunami [Volume 7, Special Issue, 2021, Pages 1232-1241]
Babu, D. Dastagiri Multivariate Jeffrey Fluid Flow past a Vertical Plate through Porous Medium [Volume 6, Issue 3, 2020, Pages 605-616]
Bachiri, Attia On the Thermo-elastic Response of FG-CNTRC Cross-ply ‎Laminated Plates under Temperature Loading using a New HSDT‎ [Volume 8, Issue 4, 2022, Pages 1370-1386]
Bahari Kordabad, Arash Emotional Learning Based Intelligent Controller for MIMO Peripheral Milling Process [Volume 6, Issue 3, 2020, Pages 480-492]
Bahoosh, Reza Numerical Simulations of Spoiler’s Effect on a Hatchback and a ‎Sedan Car Exposed to Crosswind Effect‎ [Volume 9, Issue 2, 2023, Pages 346-356]
Bahroun, Zied Smart Gas Sensors: Materials, Technologies, Practical ‎Applications, and Use of Machine Learning – A Review [Volume 9, Issue 3, 2023, Pages 775-803]
Bakıcıerler, Gizel Conformable Double Sumudu Transform with Applications [Volume 7, Issue 2, 2021, Pages 578-586]
Balandin, Vladimir Vl. Experimental Study and Identification of a Dynamic ‎Deformation Model of Dry Clay at Strain Rates up to 2500 s-1‎ [Volume 8, Issue 3, 2022, Pages 981-995]
Balandin, Vladimir Vas. Experimental Study and Identification of a Dynamic ‎Deformation Model of Dry Clay at Strain Rates up to 2500 s-1‎ [Volume 8, Issue 3, 2022, Pages 981-995]
Baleanu, Dumitru A Novel Approach for Korteweg-de Vries Equation of Fractional Order [Volume 5, Issue 2, 2019, Pages 192-198]
Baleanu, Dumitru Exact Solution for Nonlinear Local Fractional Partial Differential Equations [Volume 6, Issue 2, 2020, Pages 200-208]
Baleanu, Dumitru Role of Magnetic field on the Dynamical Analysis of Second Grade ‎Fluid: An Optimal Solution subject to Non-integer Differentiable ‎Operators [Volume 7, Issue 1, 2021, Pages 54-68]
Baleanu, Dumitru Heat and Mass Transfer of Natural Convective Flow with Slanted ‎Magnetic Field via Fractional Operators [Volume 7, Issue 1, 2021, Pages 189-212]
Baleanu, Dumitru Effects of Non-Linear Thermal Radiation and Chemical Reaction ‎on Time Dependent Flow of Williamson Nanofluid With Combine ‎Electrical MHD and Activation Energy [Volume 7, Issue 2, 2021, Pages 546-558]
Balla, Chandra Shekar Effect of Chemical Reaction on Bioconvective Flow in Oxytactic Microorganisms Suspended Porous Cavity [Volume 6, Issue 3, 2020, Pages 653-664]
Bani Mostafa Arab, Nasrollah Accuracy Assessment of Ultrasonic C-scan and X-ray Radiography Methods for Impact Damage Detection in Glass Fiber Reinforced Polyester Composites [Volume 5, Issue 2, 2019, Pages 258-268]
Bano, Zarqa Unsteady Stokes Flow through a Porous Pipe with Periodic Suction and Injection with Slip Conditions [Volume 6, Special Issue, 2020, Pages 1168-1177]
Bantes, Fotios Numerical Analysis of the Deformation of a Shearing Machine ‎Tool under Excessive Blade Clearance [Volume 7, Issue 2, 2021, Pages 496-504]
Barak, M.S. Thermoelastic Modeling with Dual Porosity Interacting with an Inviscid Liquid [Volume 10, Issue 1, 2024, Pages 111-124]
Barman, Tapas Magnetized Bi-convective Nanofluid Flow and Entropy ‎Production Using Temperature-sensitive Base Fluid Properties:‎ A Unique Approach [Volume 8, Issue 4, 2022, Pages 1163-1175]
Baron, Thomas Performance measure and tool for benchmarking metaheuristic optimization algorithms [Volume 7, Issue 3, 2021, Pages 1803-1813]
Barrett, John Impact Dynamics of Nonlinear Materials: FE Analysis [Volume 9, Issue 3, 2023, Pages 728-738]
Barretta, Raffaele Linear dynamic response of nanobeams accounting for higher gradient effects [Volume 2, Issue 2, 2016, Pages 54-64]
Barretta, Raffaele Axial and Torsional Free Vibrations of Elastic Nano-Beams by Stress-Driven Two-Phase Elasticity [Volume 5, Issue 2, 2019, Pages 402-413]
Basalin, Artem The Direct Impact Method for Studying Dynamic Behavior of ‎Viscoplastic Materials [Volume 8, Issue 2, 2022, Pages 597-604]
Basha, H.T. Stability Analysis of Casson Nanofluid Flow over an Extending/Contracting ‎Wedge and Stagnation Point [Volume 8, Issue 2, 2022, Pages 566-579]
Basili, Michela Vibration Mitigation of Rail Noise Barriers by Hysteretic Absorbers [Volume 7, Special Issue, 2021, Pages 1205-1217]
Bassir, David Sensitivity Analyses of Structural Damage Indicators and ‎Experimental Validations [Volume 7, Issue 2, 2021, Pages 798-810]
Bassir, David A Bridge Vibration Measurement Method by UAVs based on CNNs ‎and Bayesian Optimization‎ [Volume 9, Issue 3, 2023, Pages 749-762]
Batista, Clauderino da Silva Analysis of Particulate Systems with Numerical Inverse Laplace Transform [Volume 9, Issue 4, 2023, Pages 926-934]
Battista, Daniele Linear dynamic response of nanobeams accounting for higher gradient effects [Volume 2, Issue 2, 2016, Pages 54-64]
Bég, Osman Anwar ADM Solution for Cu/CuO –Water Viscoplastic Nanofluid ‎Transient Slip Flow from a Porous Stretching Sheet with Entropy ‎Generation, Convective Wall Temperature and Radiative Effects [Volume 7, Issue 3, 2021, Pages 1291-1305]
Becker, Wilfried Two-dimensional Stress and strain Analysis for Graphene-‎polymer Nanocomposite under Axial Load [Volume 8, Issue 3, 2022, Pages 1065-1075]
Beg, Osman Anwar Multiple Solutions for Slip Effects on Dissipative Magneto-Nanofluid Transport Phenomena in Porous Media: Stability Analysis [Volume 6, Issue 4, 2020, Pages 956-967]
Begag, Abdelaziz Numerical Study on Heat Transfer and Pressure Drop in a Mini-‎Channel with Corrugated Walls‎ [Volume 7, Issue 3, 2021, Pages 1306-1314]
Behbahaninia, Ali A New Approach for Exergoeconomics Evaluation by Considering ‎Uncertainty with Monte Carlo Method [Volume 9, Issue 1, 2023, Pages 15-24]
Behdinan, Kamran Neural Networks with Input Dimensionality Reduction for ‎Efficient Temperature Distribution Prediction in a Warm ‎Stamping Process [Volume 8, Issue 4, 2022, Pages 1431-1444]
Behjameh, Mohammad Reza Global Finite Time Synchronization of Two Nonlinear Chaotic Gyros Using High Order Sliding Mode Control [Volume 1, Issue 1, 2015, Pages 26-34]
Beiranvand, Peyman Finite Element Analysis for CFST Columns under Blast Loading [Volume 3, Issue 4, 2017, Pages 283-292]
Belghaba, Kacem Exact Solution for Nonlinear Local Fractional Partial Differential Equations [Volume 6, Issue 2, 2020, Pages 200-208]
Bellout, Saliha Heat Transfer Improvement in an Open Cubic Cavity using a Hybrid Nanofluid [Volume 7, Issue 3, 2021, Pages 1501-1513]
Belov, Alexandr A. Investigation of Wood Properties at Elevated Temperature [Volume 8, Issue 1, 2022, Pages 298-305]
Belov, Alexandr Dynamic Response of a Step Loaded Cubic Cavity Embedded in a ‎Partially Saturated Poroelastic Half-space by the Boundary ‎Element Method [Volume 8, Issue 1, 2022, Pages 331-339]
Belov, Alexandr The Direct Impact Method for Studying Dynamic Behavior of ‎Viscoplastic Materials [Volume 8, Issue 2, 2022, Pages 597-604]
Belyaev, Alexander K. Modeling of Flight of the Line Thrower Projectile [Volume 7, Special Issue, 2021, Pages 1070-1076]
BENAISSA, Ali Biomechanical Evaluation of Bone Quality Effect on Stresses at Bone-Implant Interface: A Finite Element Study [Volume 7, Issue 3, 2021, Pages 1266-1275]
Benhamed, Moez M. Influence of Temperature Pulse on a Nickel Microbeams under Couple Stress Theory [Volume 6, Issue 4, 2020, Pages 777-787]
Benkabou, Rim A FEM Multiscale Homogenization Procedure using Nanoindentation for High Performance Concrete [Volume 6, Issue 3, 2020, Pages 493-504]
Bento Filho, Antônio Four Legged Guará Robot: From Inspiration to Implementation [Volume 7, Issue 3, 2021, Pages 1425-1434]
Bentouba, Said A New Quantum-computing-based Algorithm for Robotic Arms ‎and Rigid Bodies’ Orientation [Volume 7, Issue 3, 2021, Pages 1836-1846]
Benzenine, Hamidou Impact of the Narrowing System at Different Locations and ‎Heights on the Performance of a Plane Solar Collector [Volume 8, Issue 4, 2022, Pages 1445-1455]
Bertoldi, Marco Thermal Behavior of Monocrystalline Silicon Solar Cells: A ‎Numerical and Experimental Investigation on the Module ‎Encapsulation Materials [Volume 7, Issue 3, 2021, Pages 1847-1855]
Bessaim, Aicha Buckling Analysis of Embedded Nanosize FG Beams Based on a Refined Hyperbolic Shear Deformation Theory [Volume 4, Issue 3, 2018, Pages 140-146]
Bessaïh, Rachid Heat Transfer Improvement in an Open Cubic Cavity using a Hybrid Nanofluid [Volume 7, Issue 3, 2021, Pages 1501-1513]
Bessaïh, Rachid Conjugate Mixed Convection in a Horizontal Cylindrical Duct under the Solid Shell Internal Heat Generation [Volume 7, Issue 2, 2021, Pages 587-597]
Bessaїh, Rachid Turbulent Forced Convection and Entropy Generation of ‎Impinging Jets of Water-Al2O3 Nanofluid on Heated Blocks [Volume 7, Issue 4, 2021, Pages 2010-2023]
Bezazi, Abderrezak Thermal Behavior of Mesoporous Aramid Fiber Reinforced Silica Aerogel Composite for Thermal Insulation Applications: Microscale Modeling [Volume 10, Issue 1, 2024, Pages 140-151]
Bhamare, S. S. Determination of the Optimal Reduction Ratio for Least Springback during Cold Drawing of Seamless Tubes [Volume 4, Issue 4, 2018, Pages 275-285]
Bharti, Shipra Spectral Quasi-linearization for MHD Nanofluid Stagnation Boundary Layer Flow due to a Stretching/Shrinking Surface [Volume 6, Issue 4, 2020, Pages 1058-1068]
Bhaskara Reddy, K.U. Topology Optimization of Laminated Composite Plates and Shells using Optimality Criteria [Volume 8, Issue 2, 2022, Pages 405-415]
Bhaskar Reddy, N. Non-linear Radiation and Navier-slip effects on UCM Nanofluid ‎Flow past a Stretching Sheet under Lorentzian Force [Volume 7, Issue 2, 2021, Pages 638-645]
Bhatia, Dinesh Laminar Flow Control and Drag Reduction using Biomimetically ‎Inspired Forward Facing Steps [Volume 7, Issue 2, 2021, Pages 752-763]
Bhattacharyya, K. Dufour and Soret Effects on Unsteady Heat and Mass Transfer for Powell-Eyring Fluid Flow over an Expanding Permeable Sheet [Volume 6, Issue 4, 2020, Pages 985-998]
Bhatti, Kaleemullah Unsteady Stokes Flow through a Porous Pipe with Periodic Suction and Injection with Slip Conditions [Volume 6, Special Issue, 2020, Pages 1168-1177]
Bhikshma, V. On the Six Node Hexagon Elements for Continuum Topology Optimization of Plates Carrying in Plane Loading and Shell Structures Carrying out of Plane Loading [Volume 6, Issue 3, 2020, Pages 617-639]
Bhikshma, V. Topology Optimization of Laminated Composite Plates and Shells using Optimality Criteria [Volume 8, Issue 2, 2022, Pages 405-415]
Bhowmick, Shubhankar Transient Response of Longitudinal Fins under Step Changes in ‎Base Temperature and Heat Flux using Lattice Boltzmann ‎Method [Volume 8, Issue 3, 2022, Pages 925-939]
Bien, Duong Xuan Investigation of Driving Torques at the Joints of Industrial ‎Robot Arms based on the Topology Optimization Technique [Volume 9, Issue 3, 2023, Pages 820-833]
Big-Alabo, Akuro Analysis of the Coupled Nonlinear Vibration of a Two-Mass System [Volume 5, Issue 5, 2019, Pages 935-950]
Biglari, Hasan Optimum Design of FGX-CNT-Reinforced Reddy Pipes Conveying Fluid Subjected to Moving Load [Volume 2, Issue 4, 2016, Pages 243-253]
Bilionis, Ilias Variational Inference for Nonlinear Structural ‎Identification [Volume 7, Special Issue, 2021, Pages 1218-1231]
Billah, Khondokar VIV Control Strategies Using Displacement-Based ‎Phenomenological Model [Volume 7, Special Issue, 2021, Pages 1090-1097]
Bingamil, Ahmed Ameen On the Usefulness of Pre-processing Methods in Rotating ‎Machines Faults Classification using Artificial Neural Network [Volume 7, Issue 1, 2021, Pages 254-261]
Binti Jaafar, Nurul Aini Theoretical Study on Poiseuille Flow of Herschel-Bulkley Fluid in ‎Porous Media‎ [Volume 8, Issue 4, 2022, Pages 1246-1269]
Biscaia, Hugo Numerical Analysis on the Bond Performance of Different ‎Anchored Joints under Monotonic and Cyclic Pull-push Loading [Volume 8, Issue 1, 2022, Pages 388-404]
Biserni, Cesare Constructal Design of an Idealize Arterial Bypass Graft: Effect of ‎the Bypass Attachment Pointon Resistance to Flow‎ [Volume 7, Issue 1, 2021, Pages 334-344]
Biserni, Cesare Prediction Capabilities of a One-dimensional Wall-flow ‎Particulate Filter Model [Volume 8, Issue 1, 2022, Pages 245-259]
Bisheh-Niasar, Morteza Moving Mesh Non-standard Finite Difference Method for Non-linear Heat Transfer in a Thin Finite Rod [Volume 4, Issue 3, 2018, Pages 161-166]
Bisheh-Niasar, Morteza High Order Compact Finite Difference Schemes for Solving Bratu-Type Equations [Volume 5, Issue 1, 2019, Pages 91-102]
Biswal, Uddhaba Investigation of Jeffery-Hamel Flow for Nanofluid in the Presence of Magnetic Field by a New Approach in the Optimal Homotopy Analysis Method [Volume 8, Issue 1, 2022, Pages 48-59]
Bohdan, Yurii Numerical Modeling of Heat Transfer and Hydrodynamics in Compact Shifted Arrangement Small Diameter Tube Bundles [Volume 7, Issue 1, 2021, Pages 292-301]
Bohlooly, Mehdi Buckling and Postbuckling of Concentrically Stiffened Piezo-Composite Plates on Elastic Foundations [Volume 5, Issue 1, 2019, Pages 128-140]
Bondareva, Nadezhda S. The Brick Thermal Performance Improvement using Phase ‎Change Materials [Volume 6, Special Issue, 2020, Pages 1283-1292]
Bonnin, Anne-Sophie Finite Element and Experimental Investigation on the Effect of ‎Repetitive Shock in Corrugated Cardboard Packaging [Volume 7, Issue 2, 2021, Pages 820-830]
Borawska, Eliza Theoretical Analysis of the Motorcycle Front Brake Heating ‎Process during High Initial Speed Emergency Braking [Volume 6, Special Issue, 2020, Pages 1431-1437]
Borawski, Andrzej Theoretical Analysis of the Motorcycle Front Brake Heating ‎Process during High Initial Speed Emergency Braking [Volume 6, Special Issue, 2020, Pages 1431-1437]
Borges, Julian Alves Proportional Topology Optimization under ‎Reliability-based Constraints [Volume 8, Issue 1, 2022, Pages 319-330]
Borges, Julian Alves A Novel BESO Methodology for Topology Optimization of ‎Reinforced Concrete Structures: A Two-loop Approach [Volume 9, Issue 2, 2023, Pages 498-512]
Borgheipour, Hasti Economic Evaluation of Supplying Commercial Thermal Load by ‎a New CPVT System: A Case Study in Iran [Volume 9, Issue 2, 2023, Pages 371-383]
Boroushaki, Mehrdad Emotional Learning Based Intelligent Controller for MIMO Peripheral Milling Process [Volume 6, Issue 3, 2020, Pages 480-492]
Borzenko, Evgeny I. Flow Structure when Filling a Channel with a Curable Liquid [Volume 9, Issue 1, 2023, Pages 195-204]
Botello, Salvador Discretization of the 2D Convection–Diffusion Equation Using ‎Discrete Exterior Calculus [Volume 6, Special Issue, 2020, Pages 1348-1363]
Boudebous, Saadoun Mixed Convection Heat Transfer and Entropy Generation in a ‎Water-filled Square Cavity Partially Heated from Below: The ‎Effects of Richardson and Prandtl Numbers [Volume 8, Issue 1, 2022, Pages 282-297]
Boudraa, Bouziane Turbulent Forced Convection and Entropy Generation of ‎Impinging Jets of Water-Al2O3 Nanofluid on Heated Blocks [Volume 7, Issue 4, 2021, Pages 2010-2023]
Boughaleb, Yahia Scaling Law of Permeability and Porosity for Fluid Transport ‎Phenomena in Porous PCM Media [Volume 7, Issue 1, 2021, Pages 84-92]
Boulahia, Z. Magneto Casson-Carreau Fluid Flow through a Circular Porous ‎Cylinder with Partial Slip‎ [Volume 8, Issue 4, 2022, Pages 1208-1221]
Bozdogan, K. Burak A Method for Determination of the Fundamental Period of Layered Soil Profiles [Volume 3, Issue 4, 2017, Pages 267-273]
Bragov, Anatoliy The Direct Impact Method for Studying Dynamic Behavior of ‎Viscoplastic Materials [Volume 8, Issue 2, 2022, Pages 597-604]
Bragov, Anatoliy M. Investigation of Wood Properties at Elevated Temperature [Volume 8, Issue 1, 2022, Pages 298-305]
Bragov, Anatoly Experimental Study and Identification of a Dynamic ‎Deformation Model of Dry Clay at Strain Rates up to 2500 s-1‎ [Volume 8, Issue 3, 2022, Pages 981-995]
Brandl, Andreas Stress Control of a Piezoelectric Lumped-element Model − ‎Theoretical Investigation and Experimental Realization [Volume 7, Special Issue, 2021, Pages 1110-1120]
Brito, Alejandro Refined Cross-sample Entropy based on Freedman-Diaconis Rule: ‎Application to Foreign Exchange Time Series [Volume 8, Issue 3, 2022, Pages 1005-1013]
Bureerat, Sujin Sweep Blade Design for an Axial Wind Turbine using a Surrogate-‎assisted Differential Evolution Algorithm [Volume 9, Issue 1, 2023, Pages 217-225]
Burmasheva, Natalya Inhomogeneous Gradient Poiseuille Flows of a Vertically Swirled Fluid [Volume 10, Issue 1, 2024, Pages 1-12]
Bustamante, R. Finite Deformations of Fibre-reinforced Elastic Solids with ‎Fibre Bending Stiffness: A Spectral Approach [Volume 8, Issue 4, 2022, Pages 1332-1342]

C

C, Veeresh Effects of Thermal Diffusion and Radiation on Magnetohydrodynamic (MHD) Chemically Reacting Fluid Flow Past a Vertical Plate in a Slip Flow Regime [Volume 5, Issue 2, 2019, Pages 334-343]
Cárdenas, Diego Measuring Crack-type Damage Features in Thin-walled ‎Composite Beams using De-noising and a 2D Continuous Wavelet ‎Transform of Mode Shapes [Volume 7, Issue 1, 2021, Pages 355-371]
Cárdenas, Diego In-Plane Shear-Axial Strain Coupling Formulation for Shear-‎Deformable Composite Thin-Walled Beams [Volume 7, Issue 2, 2021, Pages 450-469]
Califano, Filippo A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part I: Analytical Methods and Computational Algorithms [Volume 9, Issue 2, 2023, Pages 529-549]
Califano, Filippo A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part II: Numerical Analysis and Experimental Testing [Volume 9, Issue 2, 2023, Pages 550-589]
Campos, Damián Federico Self-damping of Optical Ground Wire‎ Cables: A Bayesian Approach [Volume 9, Issue 1, 2023, Pages 205-216]
Campos Velho, Haroldo F. Damage Identification in a Multi-DOF System under Uncertainties Using Optimization Algorithms [Volume 4, Issue 4, 2018, Pages 365-374]
Can, Nihat The Relations between the Various Critical Temperatures of Thin ‎FGM Plates [Volume 6, Special Issue, 2020, Pages 1404-1419]
Candiotti, S. Evaluation of the Best New Cross-ply Laminated Plate Theories through the Axiomatic/Asymptotic Approach [Volume 4, Issue 4, 2018, Pages 331-351]
Cao, Xiao-Qun Different Groups of Variational Principles for Whitham-Broer-‎Kaup Equations in Shallow Water [Volume 6, Special Issue, 2020, Pages 1178-1183]
Cao, Xiao-Qun Variational Principles for Two Compound Nonlinear Equations ‎with Variable Coefficients [Volume 7, Issue 2, 2021, Pages 415-421]
Cao, Xiao-Qun Variational Principles and Solitary Wave Solutions of Generalized ‎Nonlinear Schrödinger Equation in the Ocean [Volume 7, Issue 3, 2021, Pages 1639-1648]
Carbas, Ricardo Effect of Temperature and Moisture on the Impact Behaviour of ‎Adhesive Joints for the Automotive Industry [Volume 7, Issue 3, 2021, Pages 1488-1500]
Cardenas, Diego Generation of a Quadrilateral Mesh based on NURBS for Gyroids ‎of Variable Thickness and Porosity [Volume 8, Issue 2, 2022, Pages 684-698]
Carpinteri, Alberto Long-span Suspension Bridge Flutter Analysis ‎with Drag Force Effects [Volume 7, Special Issue, 2021, Pages 1077-1089]
Casagrande, Daniele Direct Transcription Approach to Dynamic Optimization Problems in Engineering [Volume 8, Issue 2, 2022, Pages 605-616]
Casalotti, Arnaldo Improving the linear stability of the visco-elastic Beck's beam via piezoelectric controllers [Volume 7, Special Issue, 2021, Pages 1098-1109]
Casas, Walter Jesus Paucar A Novel BESO Methodology for Topology Optimization of ‎Reinforced Concrete Structures: A Two-loop Approach [Volume 9, Issue 2, 2023, Pages 498-512]
Casciati, Sara Editorial [Volume 7, Special Issue, 2021]
Casini, Paolo Vibration Mitigation of Rail Noise Barriers by Hysteretic Absorbers [Volume 7, Special Issue, 2021, Pages 1205-1217]
Castagna, Pierre Reducing Retrieval Time in Automated Storage and Retrieval System with a Gravitational Conveyor Based on Multi-Agent Systems [Volume 4, Issue 1, 2018, Pages 55-68]
Cattani, Carlo A New Class of Linear Canonical Wavelet Transform [Volume 10, Issue 1, 2024, Pages 64-79]
Cattani, Piercarlo Sizing the Actuators for a Dragon Fly Prototype [Volume 10, Issue 1, 2024, Pages 152-163]
Ceballos Zuluaga, Jorge Mario Fluid-dynamic Simulations for Assessment of Dimensioning ‎Methodologies of Pelton Turbine Buckets Considering the Initial ‎Torque Overcoming [Volume 9, Issue 4, 2023, Pages 1036-1048]
Chaabelasri, Elmiloud Random Walk Particle Tracking for Convection-diffusion ‎Dominated Problems in Shallow Water Flows [Volume 7, Issue 2, 2021, Pages 486-495]
Chaimahawan, Preeda Shear-flexure Interaction Frame Model on Kerr-type Foundation ‎for Analysis of Non-ductile RC Members on Foundation [Volume 8, Issue 3, 2022, Pages 1076-1090]
Chaiviriyawong, Passagorn Design of Cellular Members under Axial-Shear-Flexure Interaction [(Articles in Press)]
Chakraborty, Himadri Shekhar Numerical Investigation on Flow Transition through a Curved ‎Square Duct with Negative Rotation [Volume 7, Issue 3, 2021, Pages 1435-1447]
Chakraverty, S. Residual Power Series Method for Solving Time-fractional Model of Vibration Equation of Large Membranes [Volume 5, Issue 4, 2019, Pages 603-615]
Chakraverty, S. Dynamic Response Analysis of Fractionally Damped Beams Subjected to External Loads using Homotopy Analysis Method [Volume 5, Issue 2, 2019, Pages 355-366]
Chakraverty, Snehashish Investigation of Jeffery-Hamel Flow for Nanofluid in the Presence of Magnetic Field by a New Approach in the Optimal Homotopy Analysis Method [Volume 8, Issue 1, 2022, Pages 48-59]
Chalandon, Pierre Using the Finite Element Analysis Method to Study the 3-point Bending Test for the Characterization of the Adherence [Volume 6, Issue 3, 2020, Pages 505-516]
Chamkha, Ali J. Free Convection Flow of an Electrically-Conducting Micropolar Fluid between Parallel Porous Vertical Plates Using Differential Transform [Volume 4, Issue 4, 2018, Pages 286-298]
Chamkha, Ali J. A Review of Solar Energy Collectors: Models and Applications [Volume 4, Issue 4, 2018, Pages 375-401]
Chamkha, Ali J. Analysis of Fluid Dynamics and Heat Transfer in a Rectangular Duct with Staggered Baffles [Volume 5, Issue 2, 2019, Pages 231-248]
Chamkha, Ali J. Fluid Flow and Heat Transfer over Staggered ꞌ+ꞌ Shaped Obstacles [Volume 6, Issue 4, 2020, Pages 741-756]
Chamkha, Ali J. Viscous Dissipation Impact on Free Convection Flow of Cu-water Nanofluid in a Circular Enclosure with Porosity Considering Internal Heat Source [Volume 5, Issue 4, 2019, Pages 717-726]
Chamkha, Ali J. Non-similar Solutions of MHD Mixed Convection over an Exponentially Stretching Surface: Influence of Non-uniform Heat Source or Sink [Volume 7, Issue 3, 2021, Pages 1334-1347]
Chamkha, Ali J. Heating Capacity of an Earth to Air Heat Exchanger in Arid Regions - Experimental Investigation [Volume 8, Issue 2, 2022, Pages 429-437]
Chamkha, Ali J. Thermal-Aerodynamic Performance Measurement of Air Heat ‎Transfer Fluid Mechanics over S-shaped Fins in Shell-and-tube ‎Heat Exchangers [Volume 7, Issue 4, 2021, Pages 1931-1943]
Chamkha, Ali J. Hydrodynamic Behavior in Solar Oil Heat Exchanger Ducts Fitted ‎with Staggered Baffles and Fins [Volume 8, Issue 3, 2022, Pages 774-790]
Chamkha, Ali J. Editorial [Volume 6, Special Issue, 2020]
Chamkha, Ali J. Magnetized Bi-convective Nanofluid Flow and Entropy ‎Production Using Temperature-sensitive Base Fluid Properties:‎ A Unique Approach [Volume 8, Issue 4, 2022, Pages 1163-1175]
Chamkha, Ali J. Heat Transfer Improvement in a Thermal Energy Storage System ‎using Auxiliary Fluid Instead of Nano-PCM in an Inclined ‎Enclosure: A Comparative Study [Volume 9, Issue 2, 2023, Pages 475-486]
Chamkha, Ali. J The Solar Air Channels: Comparative Analysis, Introduction of Arc-shaped Fins to Improve the Thermal Transfer [Volume 5, Issue 4, 2019, Pages 616-626]
Chamkha, Ali. J Numerical Simulation of Unsteady Flow toward a Stretching/Shrinking Sheet in Porous Medium Filled with a Hybrid Nanofluid [Volume 8, Issue 1, 2022, Pages 11-20]
Chamkha, Ali. J. Theoretical Study of Convective Heat Transfer in Ternary ‎Nanofluid Flowing past a Stretching Sheet [Volume 8, Issue 4, 2022, Pages 1279-1286]
Chamkha, Ali Jawad Thermal Behavior of Mesoporous Aramid Fiber Reinforced Silica Aerogel Composite for Thermal Insulation Applications: Microscale Modeling [Volume 10, Issue 1, 2024, Pages 140-151]
Chamoret, Dominique Performance measure and tool for benchmarking metaheuristic optimization algorithms [Volume 7, Issue 3, 2021, Pages 1803-1813]
Chandrasekhar, K.N.V. Isogeometric Topology Optimization of Continuum Structures using an Evolutionary Algorithm [Volume 5, Issue 2, 2019, Pages 414-440]
Chandrasekhar, K.N.V. On the Six Node Hexagon Elements for Continuum Topology Optimization of Plates Carrying in Plane Loading and Shell Structures Carrying out of Plane Loading [Volume 6, Issue 3, 2020, Pages 617-639]
Chandrasekhar, K.N.V. Topology Optimization of Laminated Composite Plates and Shells using Optimality Criteria [Volume 8, Issue 2, 2022, Pages 405-415]
Chang, Heng Thermal Buckling Analysis of Functionally Graded Euler-Bernoulli Beams with Temperature-dependent Properties [Volume 6, Issue 3, 2020, Pages 457-470]
Charan, Pal Ranjan Sasti Analysis and Optimization of Truss Structures, Constrained ‎Handling using Genetic Algorithm [Volume 7, Issue 3, 2021, Pages 1324-1333]
Charles, Terrance Assessment of Drag Reduction Devices Mounted on a Simplified ‎Tractor-Trailer Truck Model [Volume 7, Issue 1, 2021, Pages 45-53]
Charles, Terrance Computational Study of Flow around 2D and 3D Tandem Bluff Bodies [Volume 7, Issue 2, 2021, Pages 528-534]
Chatzi, Eleni N. On the Active Vibration Control of Nonlinear Uncertain Structures [Volume 7, Special Issue, 2021, Pages 1183-1197]
Chaudhary, Soniya Mechanics of 2D Elastic Stress Waves Propagation Impacted by Concentrated Point Source Disturbance in Composite Material Bars [Volume 6, Issue 4, 2020, Pages 788-800]
Chaudhary, Soniya Scattering and Backscattering Study of Mechanical Plane Wave in Composite Materials Plates (Earth model 1066B and LiNbO3) [Volume 8, Issue 2, 2022, Pages 518-527]
Chau-Dinh, Thanh Nonlinear Bending Analysis of Functionally Graded Plates Using SQ4T Elements based on Twice Interpolation Strategy [Volume 6, Issue 1, 2020, Pages 125-136]
Chau-Dinh, Thanh An 8-Node Solid-Shell Finite Element based on Assumed Bending ‎Strains and Cell-Based Smoothed Membrane Strains for Static Analysis of Plates and Shells [Volume 6, Special Issue, 2020, Pages 1335-1347]
Chaurasia, Anju Numerical Scheme based on Non-polynomial Spline Functions for ‎the System of Second Order Boundary Value Problems arising in ‎Various Engineering Applications [Volume 8, Issue 1, 2022, Pages 144-152]
Chavarette, Fábio Roberto Analysis and Recognition of Standards in Intelligent Hybrid ‎Systems using Natural Computing [Volume 7, Issue 3, 2021, Pages 1764-1773]
Chavarette, Fábio Roberto Prognosis and Detection of Experimental Failures in Open Field Diesel ‎Engines Applying Wiener's Artificial Immunological Systems [Volume 7, Issue 1, 2021, Pages 1-12]
Chen, Chun-Sheng Thermal Buckling Analysis of Functionally Graded Euler-Bernoulli Beams with Temperature-dependent Properties [Volume 6, Issue 3, 2020, Pages 457-470]
Chen, Chun-Sheng Dynamic Response of Functionally Graded Carbon ‎Nanotube-Reinforced Hybrid Composite Plates [Volume 8, Issue 1, 2022, Pages 182-195]
Chen, Gongfa Sensitivity Analyses of Structural Damage Indicators and ‎Experimental Validations [Volume 7, Issue 2, 2021, Pages 798-810]
Chen, Gongfa A Bridge Vibration Measurement Method by UAVs based on CNNs ‎and Bayesian Optimization‎ [Volume 9, Issue 3, 2023, Pages 749-762]
Chen, Rou Scalings of Inverse Energy Transfer and Energy Decay in 3-D Decaying Isotropic Turbulence with Non-rotating or Rotating Frame of Reference [Volume 5, Issue 4, 2019, Pages 639-646]
Chen, Wei-Ren Thermal Buckling Analysis of Functionally Graded Euler-Bernoulli Beams with Temperature-dependent Properties [Volume 6, Issue 3, 2020, Pages 457-470]
Chen, Wei-Ren Dynamic Response of Functionally Graded Carbon ‎Nanotube-Reinforced Hybrid Composite Plates [Volume 8, Issue 1, 2022, Pages 182-195]
Chen, Xiao Alternative Integration Approaches in the Weight Function ‎Method for Crack Problems [Volume 7, Issue 3, 2021, Pages 1719-1725]
Cheraghbak, Ali Magnetic Field Effects on the Elastic Behavior of Polymeric Piezoelectric Cylinder Reinforced with CNTs [Volume 2, Issue 4, 2016, Pages 222-229]
Che Sidik, Nor Azwadi Moving Least Squares Method and its Improvement: A Concise Review [Volume 7, Issue 2, 2021, Pages 883-889]
Chhabra, Vishal Effect of Magnetic Field on Viscous Flow through Composite ‎Porous Channel using Boundary Element Method [Volume 9, Issue 4, 2023, Pages 1016-1035]
Chien, Trinh Minh Nonlinear Dynamic Response of Functionally Graded Porous Plates on Elastic Foundation Subjected to Thermal and Mechanical Loads [Volume 4, Issue 4, 2018, Pages 245-259]
Chiremsel, Rachid Numerical Investigation of an Unsteady and Anisotropic Turbulent ‎Flow Downstream a 90° Bend Pipe with and without Ribs [Volume 7, Issue 3, 2021, Pages 1620-1638]
Chiremsel, Zakarya Numerical Investigation of an Unsteady and Anisotropic Turbulent ‎Flow Downstream a 90° Bend Pipe with and without Ribs [Volume 7, Issue 3, 2021, Pages 1620-1638]
Chirkov, Artyom O. Influence of Up-down-up Constitutive Equation Parameters on ‎Yield Plateau Stage of Mild Steel Samples Subjected to Stretching [Volume 8, Issue 4, 2022, Pages 1315-1323]
Cho, Hancheol On Robust Adaptive PD Control of Robot Manipulators [Volume 6, Special Issue, 2020, Pages 1450-1466]
Chouaf, Abdelkerim Comparative Study of the Spectral Method, DISPERSE and Other ‎Classical Methods for Plotting the Dispersion Curves in ‎Anisotropic Plates [Volume 9, Issue 4, 2023, Pages 955-973]
Civalek, Omer Free Vibration of Annular Plates by Discrete Singular Convolution and Differential Quadrature Methods [Volume 2, Issue 3, 2016, Pages 128-133]
Civalek, Omer Bending Response of Nanobeams Resting on Elastic Foundation [Volume 4, Issue 2, 2018, Pages 105-114]
Civalek, Omer Optimum Design of Nano-Scaled Beam Using the Social Spider Optimization (SSO) Algorithm [Volume 7, Issue 3, 2021, Pages 1348-1361]
Civalek, Ömer Deflection of a hyperbolic shear deformable microbeam under a concentrated load [Volume 2, Issue 2, 2016, Pages 65-73]
Civalek, Ömer Application of Newmark Average Acceleration and Ritz Methods ‎on Dynamical Analysis of Composite Beams under a Moving Load [Volume 8, Issue 2, 2022, Pages 764-773]
Civalek, Ömer A Novel Approach to Fully Nonlinear Mathematical Modeling of ‎Tectonic Plates [Volume 9, Issue 2, 2023, Pages 430-444]
Clarke, Alastair On the Use of Acoustic Emission and Digital Image Correlation for Welded Joints Damage Characterization [Volume 5, Issue 2, 2019, Pages 381-389]
Clarke, Lauren Elizabeth Accelerating the Convergence of Multiphase Flow Simulations ‎when Employing Non-Uniform Structured Grids [Volume 7, Issue 1, 2021, Pages 235-253]
Clementi, Francesco Natural frequencies and internal resonance of beams with arbitrarily distributed axial loads [Volume 7, Special Issue, 2021, Pages 1009-1019]
Concli, Franco Numerical Modeling of Fluid’s Aeration: Analysis of the Power ‎Losses and Lubricant Distribution in Gearboxes [Volume 9, Issue 1, 2023, Pages 83-94]
Conde, José Manuel Paixão WaveMIMO Methodology: Numerical Wave Generation of a ‎Realistic Sea State‎ [Volume 7, Issue 4, 2021, Pages 2129-2148]
Contreras-Reyes, Javier E. Refined Cross-sample Entropy based on Freedman-Diaconis Rule: ‎Application to Foreign Exchange Time Series [Volume 8, Issue 3, 2022, Pages 1005-1013]
Cuadrado Sempere, Óscar Mechanical Characterisation and Comparison of Hyperelastic ‎Adhesives: Modelling and Experimental Validation [Volume 8, Issue 1, 2022, Pages 359-369]
Cuba, Lizbeth Generalized 2-Unknown’s HSDT to Study Isotropic and Orthotropic Composite Plates [Volume 5, Issue 1, 2019, Pages 141-149]
Cuba, Lizbeth Bending and Free Vibration Analysis of Functionally Graded Plates via Optimized Non-polynomial Higher Order Theories [Volume 5, Issue 2, 2019, Pages 281-298]
Cui, Fangsen A Bridge Vibration Measurement Method by UAVs based on CNNs ‎and Bayesian Optimization‎ [Volume 9, Issue 3, 2023, Pages 749-762]
Cunedioglu, Yusuf Free Vibration Analysis of Functionally Graded Beams with Cracks [Volume 6, Issue 4, 2020, Pages 908-919]
Curcino, Ingrid V. Hybrid Solution for the Analysis of MHD Micropolar Fluid Flow in a Vertical Porous Parallel-Plates Duct [Volume 6, Special Issue, 2020, Pages 1107-1124]

D

Daikh, Ahmed A. Bending of Functionally Graded Sandwich Nanoplates Resting on ‎Pasternak Foundation under Different Boundary Conditions [Volume 6, Special Issue, 2020, Pages 1245-1259]
Daikh, Ahmed Amine On the Thermo-elastic Response of FG-CNTRC Cross-ply ‎Laminated Plates under Temperature Loading using a New HSDT‎ [Volume 8, Issue 4, 2022, Pages 1370-1386]
Dairo, O U Analytical Investigations of the Effects of Tool Pin Profile and Process Parameters on the Peak Temperature in Friction Stir Welding [Volume 3, Issue 2, 2017, Pages 114-124]
Dairo, U O Modeling of heat generations for different tool profiles in friction stir welding: study of tool geometry and contact conditions [Volume 3, Issue 1, 2017, Pages 37-59]
Damrongwiriyanupap, Nattapong Nonlinear Winkler-based Frame Element with Inclusion of Shear-Flexure Interaction Effect for Analysis of Non-Ductile RC Members on Foundation [Volume 7, Issue 1, 2021, Pages 148-164]
Damrongwiriyanupap, Nattapong Shear-flexure Interaction Frame Model on Kerr-type Foundation ‎for Analysis of Non-ductile RC Members on Foundation [Volume 8, Issue 3, 2022, Pages 1076-1090]
Daneshmand, Farhang Nonlinear transversely vibrating beams by the homotopy perturbation method with an auxiliary term [Volume 1, Issue 1, 2015, Pages 1-9]
Daneshmehr, Ali Reza Analytical bending solution of fully clamped orthotropic rectangular plates resting on elastic foundations by the finite integral transform method [Volume 1, Issue 2, 2015, Pages 52-58]
Daneshmehr, Ali Reza Study on Free Vibration and Wave Power Reflection in Functionally Graded Rectangular Plates using Wave Propagation Approach [Volume 5, Issue 1, 2019, Pages 77-90]
Danish, Gulzar Ahmad Effects of Non-Linear Thermal Radiation and Chemical Reaction ‎on Time Dependent Flow of Williamson Nanofluid With Combine ‎Electrical MHD and Activation Energy [Volume 7, Issue 2, 2021, Pages 546-558]
Daoud, Monzer Effect of Coating Materials on the Fatigue Behavior of Hip Implants: A Three-dimensional Finite Element Analysis [Volume 6, Issue 2, 2020, Pages 284-295]
Da Rocha, Fabio Carlos Analytical Expressions for the Singularities Treatment in the ‎Three-dimensional Elastostatic Boundary Element Method [Volume 7, Issue 2, 2021, Pages 739-751]
Da Rocha, Fabio Carlos Analysis of High-order Approximations by Spectral Interpolation Applied to One- and Two-dimensional Finite Element Method [Volume 6, Issue 1, 2020, Pages 145-159]
Darus, Maslina Applications of Higher-Order Derivatives to the Subclasses of ‎Meromorphic Starlike Functions [Volume 7, Issue 1, 2021, Pages 321-333]
Darwich, Ayham Effect of Coating Materials on the Fatigue Behavior of Hip Implants: A Three-dimensional Finite Element Analysis [Volume 6, Issue 2, 2020, Pages 284-295]
Das, Raj Lamb Wave Analysis in Anisotropic Multilayer ‎Piezoelectric-piezomagnetic Material [Volume 8, Issue 2, 2022, Pages 629-640]
Dash, A.K. Free Convection of Micropolar Fluid over an Infinite Inclined ‎Moving Porous Plate [Volume 8, Issue 4, 2022, Pages 1154-1162]
Dastjerdi, Shahriar A Novel Approach to Fully Nonlinear Mathematical Modeling of ‎Tectonic Plates [Volume 9, Issue 2, 2023, Pages 430-444]
Davar, Ali Experimental and Numerical Buckling Analysis of Carbon Fiber Composite Lattice Conical Structure before and after Lateral Impact [Volume 6, Issue 4, 2020, Pages 813-822]
Davesac, Rodrigo Rocha Numerical Study and Geometric Investigation of Corrugated ‎Channels Subjected to Forced Convective Flows [Volume 7, Issue 2, 2021, Pages 727-738]
Davodi, Amin Thermal Analysis of Radiating Film Flow of Sodium Alginate ‎using MWCNT Nanoparticles ‎ [Volume 8, Issue 1, 2022, Pages 219-231]
De Felice, Alessandro Stability Analysis of Articulated Bus in Straight-ahead Running Manoeuvre [Volume 7, Issue 3, 2021, Pages 1649-1662]
De Felice, Alessandro Multibody Efficiency Analysis of Chain Drives in Racing Motorcycles [Volume 8, Issue 3, 2022, Pages 1091-1102]
Dehghani, Reza Distributed-parameter Dynamic Modeling and Bifurcation Analysis of a Trapezoidal Piezomagnetoelastic Energy Harvester [Volume 8, Issue 1, 2022, Pages 97-113]
Dehraj, Sanaullah Asymptotic Approximations of the Solution for a Traveling String under Boundary Damping [Volume 5, Issue 5, 2019, Pages 918-925]
Delavari, Hadi Global Finite Time Synchronization of Two Nonlinear Chaotic Gyros Using High Order Sliding Mode Control [Volume 1, Issue 1, 2015, Pages 26-34]
Delavari, Hadi Fuzzy Modeling and Synchronization of a New Hyperchaotic Complex System with Uncertainties [Volume 1, Issue 3, 2015, Pages 134-144]
Delgado-Gutiérrez, Arturo Generation of a Quadrilateral Mesh based on NURBS for Gyroids ‎of Variable Thickness and Porosity [Volume 8, Issue 2, 2022, Pages 684-698]
Delgado-Gutierrez, Arturo In-Plane Shear-Axial Strain Coupling Formulation for Shear-‎Deformable Composite Thin-Walled Beams [Volume 7, Issue 2, 2021, Pages 450-469]
Delkhosh, Mehdi An Efficient Numerical Method to Solve the Boundary Layer Flow of an Eyring-Powell Non-Newtonian Fluid [Volume 5, Issue 2, 2019, Pages 454-467]
DELLA, Noureddine Biomechanical Evaluation of Bone Quality Effect on Stresses at Bone-Implant Interface: A Finite Element Study [Volume 7, Issue 3, 2021, Pages 1266-1275]
Demir, Cigdem Bending Response of Nanobeams Resting on Elastic Foundation [Volume 4, Issue 2, 2018, Pages 105-114]
Demirkoparan, Hasan Bifurcation of Fiber-Reinforced Cylindrical Membranes under ‎Extension, Inflation, and Swelling [Volume 9, Issue 1, 2023, Pages 113-128]
De Rosa, Maria Anna Variational Derivation of Truncated Timoshenko-Ehrenfest Beam Theory [Volume 8, Issue 3, 2022, Pages 996-1004]
De Rossi, Lorenzo Multibody Efficiency Analysis of Chain Drives in Racing Motorcycles [Volume 8, Issue 3, 2022, Pages 1091-1102]
Dertimanis, Vasilis K. On the Active Vibration Control of Nonlinear Uncertain Structures [Volume 7, Special Issue, 2021, Pages 1183-1197]
Dezvareh, Reza Evaluation of Turbulence on the Dynamics of Monopile Offshore Wind Turbine under the Wave and Wind Excitations [Volume 5, Issue 4, 2019, Pages 704-716]
Dezvareh, Reza Upgrading the Seismic Capacity of Pile-Supported Wharfs Using Semi-Active Liquid Column Gas Damper [Volume 6, Issue 1, 2020, Pages 112-124]
Dhaiban, Hussein T. The Optimal Design of Heat Sinks: A Review [Volume 6, Issue 4, 2020, Pages 1030-1043]
Dikmen, Fatih Buckling Analysis of Functionally Graded Shells under Mixed ‎Boundary ‎Conditions Subjected to Uniform Lateral Pressure [Volume 7, Issue 1, 2021, Pages 345-354]
Dinarvand, Saeed MHD Flow and Heat Transfer of SiC-TiO2/DO Hybrid Nanofluid due to a Permeable Spinning Disk by a Novel Algorithm [Volume 5, Issue 5, 2019, Pages 976-988]
Dinarvand, Saeed Numerical Simulation of Unsteady Flow toward a Stretching/Shrinking Sheet in Porous Medium Filled with a Hybrid Nanofluid [Volume 8, Issue 1, 2022, Pages 11-20]
Dinh Duc, Nguyen Nonlinear Dynamic Response of Functionally Graded Porous Plates on Elastic Foundation Subjected to Thermal and Mechanical Loads [Volume 4, Issue 4, 2018, Pages 245-259]
Dipasquale, Daniele A Stress Tensor-based Failure Criterion for Ordinary State-based ‎Peridynamic Models‎ [Volume 8, Issue 2, 2022, Pages 617-628]
Di Re, Paolo Computational Enhancement of a Mixed 3D Beam Finite Element with Warping and Damage [Volume 8, Issue 1, 2022, Pages 260-281]
Divya, B.B. Effects of Inclined Magnetic Field and Porous Medium on Peristaltic Flow of a Bingham Fluid with Heat Transfer [Volume 7, Issue 4, 2021, Pages 1892-1906]
Diwakar Reddy, V. Experimental Investigation on Radial Ball Bearing Parameters Using Taguchi Method [Volume 4, Issue 1, 2018, Pages 69-74]
Djebali, Ridha Thermal Behavior of Mesoporous Aramid Fiber Reinforced Silica Aerogel Composite for Thermal Insulation Applications: Microscale Modeling [Volume 10, Issue 1, 2024, Pages 140-151]
Djermane, Mohamed Numerical Study of the Dynamic Response of Elevated Steel ‎Conical Tank under Vertical Seismic Excitation - Case Study [Volume 9, Issue 2, 2023, Pages 445-457]
Dlamini, Phumlani An Efficient Spectral Method-based Algorithm for Solving a ‎High-dimensional Chaotic Lorenz System [Volume 7, Issue 1, 2021, Pages 225-234]
Do, Thanh Binh Multilevel Modeling of 1-3 Piezoelectric Energy Harvester Based ‎on Porous Piezoceramics [Volume 9, Issue 3, 2023, Pages 763-774]
Doan, Trac Luat Free Vibration Analysis of Functionally Graded Porous Nano-‎plates with Different Shapes Resting on Elastic Foundation [Volume 7, Issue 3, 2021, Pages 1593-1605]
Dogonchi, Abdul Sattar Viscous Dissipation Impact on Free Convection Flow of Cu-water Nanofluid in a Circular Enclosure with Porosity Considering Internal Heat Source [Volume 5, Issue 4, 2019, Pages 717-726]
Doh, Deog-Hee Impact of Magnetic Field on Convective Flow of a Micropolar Fluid with two Parallel Heat Source [Volume 5, Issue 4, 2019, Pages 652-666]
Doh, Deog-Hee Unsteady Separated Stagnation Point Flow of Nanofluid past a ‎Moving Flat Surface in the Presence of Buongiorno's Model [Volume 7, Issue 3, 2021, Pages 1283-1290]
Dolon, Shamsun Naher Numerical Investigation on Flow Transition through a Curved ‎Square Duct with Negative Rotation [Volume 7, Issue 3, 2021, Pages 1435-1447]
Domingues dos Santos, Elizaldo Multiobjective Geometric Analysis of Stiffened Plates under ‎Bending through Constructal Design Method [Volume 6, Special Issue, 2020, Pages 1438-1449]
Domingues dos Santos, Elizaldo WaveMIMO Methodology: Numerical Wave Generation of a ‎Realistic Sea State‎ [Volume 7, Issue 4, 2021, Pages 2129-2148]
Domiri Ganji, Davood An Efficient Numerical Method to Solve the Boundary Layer Flow of an Eyring-Powell Non-Newtonian Fluid [Volume 5, Issue 2, 2019, Pages 454-467]
Dong, Chensong Multi-objective Optimal Design of Carbon and Glass Reinforced ‎Hybrid Composites under Flexural Loading [Volume 8, Issue 4, 2022, Pages 1324-1331]
Dongbang, Watcharin Sweep Blade Design for an Axial Wind Turbine using a Surrogate-‎assisted Differential Evolution Algorithm [Volume 9, Issue 1, 2023, Pages 217-225]
Dönmez, Ahmet Abdullah Size Effect on Inclined Cracking in Unidirectional Composites [Volume 7, Issue 4, 2021, Pages 2149-2158]
Dovbysh, Andriy The Dynamics of the Working Body of the Tubular Conveyor with ‎the Chain Drive [Volume 7, Issue 3, 2021, Pages 1710-1718]
Dragomir, S.S. Numerical Investigations of the Coupled Nonlinear Non-homogeneous Partial Differential Equations [Volume 8, Issue 3, 2022, Pages 1054-1064]
Dragunov, Valery P. Impact-enhanced Electrostatic Vibration Energy Harvester [Volume 8, Issue 2, 2022, Pages 671-683]
Dragunova, Evgeniya V. Impact-enhanced Electrostatic Vibration Energy Harvester [Volume 8, Issue 2, 2022, Pages 671-683]
Driss, Zied Thermal Behavior of Mesoporous Aramid Fiber Reinforced Silica Aerogel Composite for Thermal Insulation Applications: Microscale Modeling [Volume 10, Issue 1, 2024, Pages 140-151]
D’Annibale, Francesco Modeling beam-like planar structures by a one-dimensional continuum: an analytical-numerical method [Volume 7, Special Issue, 2021, Pages 1020-1033]
D’Annibale, Francesco Improving the linear stability of the visco-elastic Beck's beam via piezoelectric controllers [Volume 7, Special Issue, 2021, Pages 1098-1109]
Du, Jianke The Integrated Analysis of Vibrations of Quartz Crystal Plates ‎through Artificial Coupling Factors [Volume 7, Issue 1, 2021, Pages 69-77]
Duong, Xuan Bien On the Effect of the End-effector Point Trajectory on the Joint ‎Jerk of the Redundant Manipulators [Volume 7, Issue 3, 2021, Pages 1575-1582]
Duressa, Gemechis File Uniformly Convergent Numerical Method for Two-parametric ‎Singularly Perturbed Parabolic Convection-diffusion Problems [Volume 7, Issue 2, 2021, Pages 535-545]
Dutta, Jaideep Finite Integral Transform Based Solution of Second Grade Fluid Flow between Two Parallel Plates [Volume 5, Issue 5, 2019, Pages 989-997]
Duy, Le Quang Nonlinear Vibration of an Electrostatically Actuated ‎Functionally Graded Microbeam under Longitudinal Magnetic ‎Field [Volume 7, Issue 3, 2021, Pages 1537-1549]
Dyke, Shirley J. Variational Inference for Nonlinear Structural ‎Identification [Volume 7, Special Issue, 2021, Pages 1218-1231]

E

Ebrahimi, Mahmoud Twin Screw Expanders Profile Optimization Using Surrogate-‎Based Modelling [Volume 8, Issue 4, 2022, Pages 1141-1153]
Ebrahimzadeh Azghadi, Fahimeh Performance Investigation of Simple Low-dissipation AUSM ‎‎(SLAU) Scheme in Modeling of 2-D Inviscid Flow in Steam ‎Turbine Cascade Blades [Volume 9, Issue 2, 2023, Pages 332-345]
ECER, Safiye An Alternative Procedure for Longitudinal Vibration Analysis of ‎Bars with Arbitrary Boundary Conditions [Volume 9, Issue 1, 2023, Pages 294-301]
Edalatifar, Mohammad Buckling Analysis of Cantilever Nanoactuators Immersed in an Electrolyte: A Close Form Solution Using Duan-Rach Modified Adomian Decomposition Method [Volume 1, Issue 4, 2015, Pages 207-219]
Edalatifar, Mohammad A Deep Learning Approach to Predict the Flow Field and Thermal ‎Patterns of Nonencapsulated Phase Change Materials ‎Suspensions in an Enclosure‎ [Volume 8, Issue 4, 2022, Pages 1270-1278]
Eder, Martin A. Alternative Integration Approaches in the Weight Function ‎Method for Crack Problems [Volume 7, Issue 3, 2021, Pages 1719-1725]
Eegunjobi, Adetayo Irreversibility Analysis of MHD Buoyancy-Driven Variable Viscosity Liquid Film along an Inclined Heated Plate Convective Cooling [Volume 5, Issue 5, 2019, Pages 840-848]
Eegunjobi, Adetayo Samuel Entropy Analysis of a Radiating Magnetic Liquid Film along a Slippery Inclined Heated Surface with Convective Cooling [Volume 6, Special Issue, 2020, Pages 1141-1150]
Efendiyeva, Sadige P. Buckling Behavior of Nanocomposite Plates with Functionally ‎Graded Properties under Compressive Loads in Elastic and ‎Thermal Environments [Volume 9, Issue 4, 2023, Pages 974-986]
Eftekhari Yazdi, Mohammad MHD Flow and Heat Transfer of SiC-TiO2/DO Hybrid Nanofluid due to a Permeable Spinning Disk by a Novel Algorithm [Volume 5, Issue 5, 2019, Pages 976-988]
Eidi, Hamid Reza VOC level control by ventilation improvement of Flexography printing room using CFD modeling [Volume 3, Issue 3, 2017, Pages 171-177]
Eivazi Bagheri, Hadi Experimental Study on the Surface Modification by Electrical Discharge Process [Volume 5, Issue 2, 2019, Pages 249-257]
Elagamy, Khaled Efficacy of a Modulated Viscosity-dependent Temperature/nanoparticles Concentration Parameter on a ‎Nonlinear Radiative Electromagneto-nanofluid Flow along an Elongated Stretching Sheet [Volume 9, Issue 3, 2023, Pages 848-860]
El-Amin, Mohamed F. Multiscale Numerical Modeling of Solute Transport with Two-‎Phase Flow in a Porous Cavity [Volume 7, Issue 2, 2021, Pages 396-403]
El Amraoui, Rachid Numerical Investigation into the Effects of Orientation on ‎Subcooled Flow Boiling Characteristics [Volume 9, Issue 2, 2023, Pages 464-474]
El-Bahloul, Sara Ahmed Pre-drilling Effect on Thermal Friction Drilling of Cast Aluminum ‎Alloy Using Thermo-mechanical Finite Element Analysis [Volume 6, Special Issue, 2020, Pages 1371-1379]
El Bhilat, Hanan Numerical Analysis of the Effect of External Circumferential Elliptical Cracks in Transition Thickness Zone of Pressurized Pipes Using XFEM [Volume 5, Issue 5, 2019, Pages 861-874]
El-Danaf, T.A. Numerical Investigations of the Coupled Nonlinear Non-homogeneous Partial Differential Equations [Volume 8, Issue 3, 2022, Pages 1054-1064]
Eldesouky, Ibrahim Comparison of Functionally Graded Hip Stem Implants with ‎Various Second-Generation Titanium Alloys [Volume 7, Issue 3, 2021, Pages 1315-1323]
El-Dib, Yusry Stability Analysis of a Strongly Displacement Time-Delayed Duffing Oscillator Using Multiple Scales Homotopy Perturbation Method [Volume 4, Issue 4, 2018, Pages 260-274]
El-Dib, Yusry Osman The Rank Upgrading Technique for a Harmonic Restoring Force ‎of Nonlinear Oscillators [Volume 7, Issue 2, 2021, Pages 782-789]
El-Dib, Yusry O. Stability Analysis of a Damped Nonlinear Wave Equation [Volume 6, Special Issue, 2020, Pages 1394-1403]
Elgazery, Nasser S. A Periodic Solution of the Newell-Whitehead-Segel (NWS) Wave ‎Equation via Fractional Calculus [Volume 6, Special Issue, 2020, Pages 1293-1300]
Elgazery, Nasser S. Stability Analysis of a Damped Nonlinear Wave Equation [Volume 6, Special Issue, 2020, Pages 1394-1403]
Elgazery, Nasser S. Efficacy of a Modulated Viscosity-dependent Temperature/nanoparticles Concentration Parameter on a ‎Nonlinear Radiative Electromagneto-nanofluid Flow along an Elongated Stretching Sheet [Volume 9, Issue 3, 2023, Pages 848-860]
El Had, Khalid Numerical Analysis of the Effect of External Circumferential Elliptical Cracks in Transition Thickness Zone of Pressurized Pipes Using XFEM [Volume 5, Issue 5, 2019, Pages 861-874]
Elishakoff, Isaac Variational Derivation of Truncated Timoshenko-Ehrenfest Beam Theory [Volume 8, Issue 3, 2022, Pages 996-1004]
Elizalde, Hugo In-Plane Shear-Axial Strain Coupling Formulation for Shear-‎Deformable Composite Thin-Walled Beams [Volume 7, Issue 2, 2021, Pages 450-469]
El-kenani, H.N. Effect of the Gravity and Magnetic Field to Find Regular Precessions ‎of a Satellite-gyrostat with Principal Axes on a Circular Orbit [Volume 7, Issue 4, 2021, Pages 2120-2128]
EL Mghari, Hicham Numerical Investigation into the Effects of Orientation on ‎Subcooled Flow Boiling Characteristics [Volume 9, Issue 2, 2023, Pages 464-474]
El-midany, Tawfik Bending, Buckling and Vibration of a Functionally Graded Porous Beam Using Finite Elements [Volume 3, Issue 4, 2017, Pages 274-282]
El-Naggar, A. M. Periodic Solutions of the Duffing Harmonic Oscillator by He's Energy Balance Method [Volume 2, Issue 1, 2016, Pages 35-41]
Elnaqeeb, Thanaa Magnetohydrodynamic Free Convection Flows with Thermal Memory over a Moving Vertical Plate in Porous Medium [Volume 5, Issue 1, 2019, Pages 150-161]
Elsabaa, Fawzy M.F. Approximate Solutions of Coupled Nonlinear Oscillations: ‎Stability Analysis [Volume 7, Issue 2, 2021, Pages 382-395]
El-Sayed, Ahmed Mohammed Ahmed On the Dynamics of the Logistic Delay Differential Equation with ‎Two Different Delays [Volume 7, Issue 2, 2021, Pages 442-449]
El-Shafie, Ahmed Reliability Analysis of Nanocomposite Beams Reinforced with CNTs under Buckling Forces Using the Conjugate HL-RF [Volume 2, Issue 4, 2016, Pages 200-207]
Eltaher, Mohamed A. Vibration Analysis of Material Size-Dependent CNTs Using Energy Equivalent Model [Volume 4, Issue 2, 2018, Pages 75-86]
Eltaher, Mohamed A. Free Vibration Analysis of 2D Functionally Graded Strip Beam using Finite ‎Element Method‎ [Volume 8, Issue 4, 2022, Pages 1422-1430]
Eltaher, Mohamed A. Static Buckling of 2D FG Porous Plates Resting on Elastic ‎Foundation based on Unified Shear Theories‎ [Volume 9, Issue 1, 2023, Pages 239-258]
Emam, Sayyed Mohammad Evaluating the Delamination in the Drilling Process of a Melamine Coated Medium Density Fiberboard (MDF) [Volume 8, Issue 1, 2022, Pages 1-10]
Emamian, Amin An Exact Analytical Solution for Heat Conduction in a ‎Functionally Graded Conical Shell [Volume 9, Issue 2, 2023, Pages 302-317]
Emamzadeh, Mohamamd A Closed-Form Solution for Electro-Osmotic Flow in Nano-Channels [Volume 8, Issue 2, 2022, Pages 510-517]
Enab, Tawakol A. Comparison of Functionally Graded Hip Stem Implants with ‎Various Second-Generation Titanium Alloys [Volume 7, Issue 3, 2021, Pages 1315-1323]
Endalew, Mehari Fentahun Study of MHD Second Grade Flow through a Porous Microchannel under the Dual-Phase-Lag Heat and Mass Transfer Model [Volume 5, Issue 4, 2019, Pages 763-778]
Eremeev, Victor The Direct Impact Method for Studying Dynamic Behavior of ‎Viscoplastic Materials [Volume 8, Issue 2, 2022, Pages 597-604]
Eremeyev, Victor Dynamic Response of a Step Loaded Cubic Cavity Embedded in a ‎Partially Saturated Poroelastic Half-space by the Boundary ‎Element Method [Volume 8, Issue 1, 2022, Pages 331-339]
Eremeyev, Victor Experimental Study and Identification of a Dynamic ‎Deformation Model of Dry Clay at Strain Rates up to 2500 s-1‎ [Volume 8, Issue 3, 2022, Pages 981-995]
Eremeyev, Victor A. Investigation of Wood Properties at Elevated Temperature [Volume 8, Issue 1, 2022, Pages 298-305]
Eremeyev, Victor A. A Novel Approach to Fully Nonlinear Mathematical Modeling of ‎Tectonic Plates [Volume 9, Issue 2, 2023, Pages 430-444]
Eremin, Mikhail O. Influence of Up-down-up Constitutive Equation Parameters on ‎Yield Plateau Stage of Mild Steel Samples Subjected to Stretching [Volume 8, Issue 4, 2022, Pages 1315-1323]
Erkinjon son, Madaliev Murodil Numerical Calculation of an Air Centrifugal Separator Based on the SARC Turbulence Model [Volume 6, Special Issue, 2020, Pages 1133-1140]
Erre, Damien Finite Element and Experimental Investigation on the Effect of ‎Repetitive Shock in Corrugated Cardboard Packaging [Volume 7, Issue 2, 2021, Pages 820-830]
Ershkov, Sergey Rotations of a Rigid Body Close to the Lagrange Case under the ‎Action of Nonstationary Perturbation Torque [Volume 8, Issue 3, 2022, Pages 1023-1031]
Ershkov, Sergey Exact Solutions for Isobaric Inhomogeneous Couette Flows of a ‎Vertically Swirling Fluid [Volume 9, Issue 2, 2023, Pages 521-528]
Ershkov, Sergey Inhomogeneous Gradient Poiseuille Flows of a Vertically Swirled Fluid [Volume 10, Issue 1, 2024, Pages 1-12]
Ersoy, Hakan Free Vibration of Annular Plates by Discrete Singular Convolution and Differential Quadrature Methods [Volume 2, Issue 3, 2016, Pages 128-133]
Esakki, Balasubramanian Computational Fluid Dynamic Analysis of Amphibious Unmanned Aerial Vehicle [Volume 8, Issue 2, 2022, Pages 475-484]
Esfahanian, Mohsen Optimal Roll Center Height of Front McPherson Suspension System for a Conceptual Class A Vehicle [Volume 1, Issue 1, 2015, Pages 10-16]
Eskandari Jam, Jafar Buckling and Free Vibration Analysis of Fiber Metal-laminated Plates Resting on Partial Elastic Foundation [Volume 6, Issue 1, 2020, Pages 37-51]
Eskandari Jam, Jafar Experimental and Numerical Buckling Analysis of Carbon Fiber Composite Lattice Conical Structure before and after Lateral Impact [Volume 6, Issue 4, 2020, Pages 813-822]
Esmaeili, Milad Vibration and Buckling Analysis of Functionally Graded Flexoelectric Smart Beam [Volume 5, Issue 5, 2019, Pages 900-917]
Esmail, Essam L. Automatic Structural Synthesis of Planetary Geared Mechanisms ‎using Graph Theory [Volume 9, Issue 2, 2023, Pages 384-403]
Esmail, Essam L. The Structural Synthesis of Non-fractionated, Three-degree-of-freedom Planetary Gear Mechanisms [Volume 10, Issue 1, 2024, Pages 205-223]
Esqueda, Humberto Discretization of the 2D Convection–Diffusion Equation Using ‎Discrete Exterior Calculus [Volume 6, Special Issue, 2020, Pages 1348-1363]
Estumano, Diego C. Parameter Estimation in Population Balance through Bayesian ‎Technique Markov Chain Monte Carlo [Volume 7, Issue 2, 2021, Pages 890-901]
Evans, Sam On the Use of Acoustic Emission and Digital Image Correlation for Welded Joints Damage Characterization [Volume 5, Issue 2, 2019, Pages 381-389]
Evdokimova, O.V. About Earthquakes in Subduction Zones with the Potential to ‎Cause a Tsunami [Volume 7, Special Issue, 2021, Pages 1232-1241]
Ezzin, Hamdi Lamb Wave Analysis in Anisotropic Multilayer ‎Piezoelectric-piezomagnetic Material [Volume 8, Issue 2, 2022, Pages 629-640]

F

Fabbrocino, Francesco Axial and Torsional Free Vibrations of Elastic Nano-Beams by Stress-Driven Two-Phase Elasticity [Volume 5, Issue 2, 2019, Pages 402-413]
Faghani, Gholam Investigation on the Ultrasonic Tube Hydroforming in the Bulging Process Using Finite Element Method [Volume 3, Issue 4, 2017, Pages 251-257]
Faghani, Gholamreza Buckling and Vibration Analysis of Tapered Circular Nano Plate [Volume 4, Issue 1, 2018, Pages 40-54]
Faghidian, S. Ali Axial and Torsional Free Vibrations of Elastic Nano-Beams by Stress-Driven Two-Phase Elasticity [Volume 5, Issue 2, 2019, Pages 402-413]
FAKINLEDE, Omotayo. A Deformation Characteristics of Composite Structures [Volume 2, Issue 3, 2016, Pages 174-191]
Fakouriyan, Samaneh Economic Evaluation of Supplying Commercial Thermal Load by ‎a New CPVT System: A Case Study in Iran [Volume 9, Issue 2, 2023, Pages 371-383]
Fallah, Behnam MHD Flow and Heat Transfer of SiC-TiO2/DO Hybrid Nanofluid due to a Permeable Spinning Disk by a Novel Algorithm [Volume 5, Issue 5, 2019, Pages 976-988]
Fani saberi, Farhad Design of an Adaptive-Neural Network Attitude Controller of a Satellite using Reaction Wheels [Volume 1, Issue 2, 2015, Pages 67-73]
Fantuzzi, Nicholas Buckling Behavior of Nanocomposite Plates with Functionally ‎Graded Properties under Compressive Loads in Elastic and ‎Thermal Environments [Volume 9, Issue 4, 2023, Pages 974-986]
Farahani, Mohammadreza Experimental Study of the Residual Stresses in Girth Weld of Natural Gas Transmission Pipeline [Volume 5, Issue 2, 2019, Pages 199-206]
Farahani, Mohammadreza Correlation between the Weld Residual Stresses and its Tensile and Impact Strength [Volume 5, Issue 4, 2019, Pages 727-734]
Faraji, Hamza Scaling Law of Permeability and Porosity for Fluid Transport ‎Phenomena in Porous PCM Media [Volume 7, Issue 1, 2021, Pages 84-92]
Faraji, Nima Optimizing Multidirectional Torsional Hysteretic Damper Specifications using Harmony Search [Volume 10, Issue 1, 2024, Pages 80-91]
Faraz, Naeem Analytical Solution of Linear, Quadratic and Cubic Model of PTT Fluid [Volume 1, Issue 4, 2015, Pages 220-228]
Farazin, Ashkan Nanostructure, Molecular Dynamics Simulation and Mechanical Performance of PCL Membranes Reinforced with Antibacterial Nanoparticles [Volume 7, Issue 4, 2021, Pages 1907-1915]
Farbod, Mansoor A New Modified Hamilton-Crosser and Nan Models for Thermal ‎Conductivity of Different Lengths Carbon Nanotubes Water-‎based Nanofluids [Volume 8, Issue 3, 2022, Pages 831-837]
Farhadi Nia, Mahmood Theoretical and Experimental Investigation on Mechanical Behavior of Aluminum to Aluminum Tubular Bonded Lap Joint under Pure Torsion and a Finite Element Comparison with Hybrid Rivet/Bonded Joint [Volume 8, Issue 2, 2022, Pages 485-492]
Farhangdoost, Khalil On the Influence of Riveting Process Parameters on Fatigue Life of Riveted Lap Joint [Volume 6, Issue 2, 2020, Pages 248-258]
Farid, Mehrdad Failure Procedure in Adhesive Composite Joints under Different Types of Loading [Volume 5, Issue 4, 2019, Pages 647-651]
Farjam, Nazanin Pull-in behavior of a bio-mass sensor based on an electrostatically actuated cantilevered CNT with consideration of rippling effect [Volume 1, Issue 4, 2015, Pages 229-239]
Farman, Muhammad Close Loop Design in Glucose Insulin Model with Effect of ‎Physical Exercise [Volume 7, Issue 2, 2021, Pages 478-485]
Farooq, Muhammad Comparative Study of Plane Poiseuille Flow of Non-isothermal ‎Couple ‎Stress Fluid of Reynold Viscosity Model using Optimal ‎Homotopy ‎Asymptotic Method and New Iterative Method [Volume 7, Issue 2, 2021, Pages 404-414]
Farsirotou, Evangelia D. Explicit and Implicit Finite -Volume Methods for Depth Averaged Free-Surface Flows [Volume 6, Special Issue, 2020, Pages 1270-1282]
Farzin, Mahmood Investigating the Ultrasonic Assistance in the Tube Hydroforming Process [Volume 3, Issue 3, 2017, Pages 178-184]
Farzin, Mahmood Investigation on the Ultrasonic Tube Hydroforming in the Bulging Process Using Finite Element Method [Volume 3, Issue 4, 2017, Pages 251-257]
Farzin, Mahmoud Design, Analysis and Manufacturing of a Bone Cutting Ultrasonic Horn-Tool and Verification with Experimental Tests [Volume 8, Issue 2, 2022, Pages 438-447]
Fatouraee, Naser Characterization of the Nonlinear Biaxial Mechanical Behavior ‎of Human Ureter using Constitutive Modeling and Artificial ‎Neural Networks [Volume 8, Issue 4, 2022, Pages 1186-1195]
Fauzi, Umar Two-Solid Deposition in Fluid Column using Immersed ‎Boundary-Lattice Boltzmann Method [Volume 7, Issue 3, 2021, Pages 1814-1825]
Fazel, Dara Failure Procedure in Adhesive Composite Joints under Different Types of Loading [Volume 5, Issue 4, 2019, Pages 647-651]
Fazlyab, Alireza Design of an Adaptive-Neural Network Attitude Controller of a Satellite using Reaction Wheels [Volume 1, Issue 2, 2015, Pages 67-73]
Fedorenko, Roman M. ‎2D Planar Simulation of Collisions between Liquid Droplets and ‎Solid Particles in a Gas [Volume 9, Issue 3, 2023, Pages 678-694]
Feng, Chun Simulation of Hydraulic Fracture Propagation in Fractured Coal ‎Seams with Continuum-discontinuum Elements [Volume 7, Issue 4, 2021, Pages 2185-2195]
Ferdows, M. A Note on the Hydromagnetic Blasius Flow with Variable Thermal Conductivity [Volume 7, Issue 4, 2021, Pages 1925-1930]
Fernando, Nuwantha Design of Doubly Salient Permanent Magnet Generator for ‎Output Power Enhancement using Structural Modification [Volume 7, Issue 4, 2021, Pages 2171-2178]
Ferrer-Fuenmayor, Samuel Shape Optimization of Slotted Steel Plate Dampers using the ‎Simulated Annealing Algorithm [Volume 9, Issue 3, 2023, Pages 870-883]
Ferretti, Manuel Modeling beam-like planar structures by a one-dimensional continuum: an analytical-numerical method [Volume 7, Special Issue, 2021, Pages 1020-1033]
Ferroudj, Nawal Mixed Convection Heat Transfer and Entropy Generation in a ‎Water-filled Square Cavity Partially Heated from Below: The ‎Effects of Richardson and Prandtl Numbers [Volume 8, Issue 1, 2022, Pages 282-297]
Ferroudji, Fateh Structural Strength Analysis and Fabrication of a Straight Blade of an H-Darrieus Wind Turbine [Volume 7, Issue 3, 2021, Pages 1276-1282]
Filimonov, S.A. Verification and Validation of a Network Algorithm for Single-phase Flow Modeling using Microfluidic Experiments [Volume 9, Issue 4, 2023, Pages 1156-1167]
Firoozzadeh, Mohammad Thermodynamic and Environmental Assessment of Mounting Fin ‎at the Back Surface of Photovoltaic Panels [Volume 7, Issue 4, 2021, Pages 1956-1963]
Fischer, Szabolcs Modeling of the Dynamic Rail Deflection using Elastic Wave Propagation [Volume 8, Issue 1, 2022, Pages 379-387]
Fischer, Szabolcs Numerical Optimization of Battery Heat Management of Electric Vehicles [Volume 9, Issue 4, 2023, Pages 1076-1092]
Flores-Jimenez, Mariana S. Generation of a Quadrilateral Mesh based on NURBS for Gyroids ‎of Variable Thickness and Porosity [Volume 8, Issue 2, 2022, Pages 684-698]
Fomichev, Vasily A Case Study of Combined Application of Smart Materials in a ‎Thermal Energy Harvester with Vibrating Action [Volume 7, Issue 1, 2021, Pages 372-381]
Fomin, Vasily Performance of Two Types of High Speed, High Efficiency ‎Axisymmetric Intakes [Volume 7, Issue 1, 2021, Pages 93-101]
Foorginejad, Abolfazl Modeling of Weld Bead Geometry Using Adaptive Neuro-Fuzzy Inference System (ANFIS) in Additive Manufacturing [Volume 6, Issue 1, 2020, Pages 160-170]
Foorginejad, Abolfazl Designing and Creating a Mouse Using Nature-Inspired Shapes [Volume 6, Issue 4, 2020, Pages 841-847]
Formato, Andrea Sizing the Actuators for a Dragon Fly Prototype [Volume 10, Issue 1, 2024, Pages 152-163]
Fouda, Noha Bending, Buckling and Vibration of a Functionally Graded Porous Beam Using Finite Elements [Volume 3, Issue 4, 2017, Pages 274-282]
Fouda, Noha Comparison of Functionally Graded Hip Stem Implants with ‎Various Second-Generation Titanium Alloys [Volume 7, Issue 3, 2021, Pages 1315-1323]
Fourar, Ali Numerical Investigation of an Unsteady and Anisotropic Turbulent ‎Flow Downstream a 90° Bend Pipe with and without Ribs [Volume 7, Issue 3, 2021, Pages 1620-1638]
Fournier, Stéphane Parametric Optimization of a Cyclogiro Aircraft Design for Efficient Hover with Aeroelastic Considerations [Volume 7, Issue 3, 2021, Pages 1774-1787]
Fragassa, Cristiano Multiobjective Geometric Analysis of Stiffened Plates under ‎Bending through Constructal Design Method [Volume 6, Special Issue, 2020, Pages 1438-1449]
Fragassa, Cristiano Thermal Behavior of Monocrystalline Silicon Solar Cells: A ‎Numerical and Experimental Investigation on the Module ‎Encapsulation Materials [Volume 7, Issue 3, 2021, Pages 1847-1855]
Freitas, Mario A Comparative Analysis of TLCD-Equipped Shear Buildings under Dynamic Loads [Volume 5, Issue 1, 2019, Pages 40-45]
Fuentes-Aguilar, Rita Q. Generation of a Quadrilateral Mesh based on NURBS for Gyroids ‎of Variable Thickness and Porosity [Volume 8, Issue 2, 2022, Pages 684-698]
Fung, Chin-Ping Dynamic Response of Functionally Graded Carbon ‎Nanotube-Reinforced Hybrid Composite Plates [Volume 8, Issue 1, 2022, Pages 182-195]
Fursov, Andrei A Case Study of Combined Application of Smart Materials in a ‎Thermal Energy Harvester with Vibrating Action [Volume 7, Issue 1, 2021, Pages 372-381]

G

Gagnon, Louis Parametric Optimization of a Cyclogiro Aircraft Design for Efficient Hover with Aeroelastic Considerations [Volume 7, Issue 3, 2021, Pages 1774-1787]
Gajbhiye, Param D. Bending Analysis of Thick Isotropic Plates by Using 5th Order Shear Deformation Theory [Volume 2, Issue 2, 2016, Pages 80-95]
Galkin, Vladislav Performance of Two Types of High Speed, High Efficiency ‎Axisymmetric Intakes [Volume 7, Issue 1, 2021, Pages 93-101]
Ganga, B. Slip Effects on Ohmic Dissipative Non-Newtonian Fluid Flow in the Presence of Aligned Magnetic Field [Volume 6, Issue 2, 2020, Pages 296-306]
Ganga, B. Three Dimensional Non-linear Radiative Nanofluid Flow over a Riga Plate [Volume 6, Issue 4, 2020, Pages 1012-1029]
Ganga, B. Heat Transfer of Hybrid-nanofluids Flow Past a Permeable Flat Surface with Different Volume Fractions [Volume 8, Issue 1, 2022, Pages 21-35]
Ganji, Davood Domiri Determination of Periodic Solution for Tapered Beams with Modified Iteration Perturbation Method [Volume 1, Issue 1, 2015, Pages 44-51]
Ganji, Davood Domiri Viscous Dissipation Impact on Free Convection Flow of Cu-water Nanofluid in a Circular Enclosure with Porosity Considering Internal Heat Source [Volume 5, Issue 4, 2019, Pages 717-726]
Gao, Hui Simulation of Hydraulic Fracture Propagation in Fractured Coal ‎Seams with Continuum-discontinuum Elements [Volume 7, Issue 4, 2021, Pages 2185-2195]
Gao, Wan-Yang Numerical Analysis on the Bond Performance of Different ‎Anchored Joints under Monotonic and Cyclic Pull-push Loading [Volume 8, Issue 1, 2022, Pages 388-404]
Gao, Yonggang A Simplified Analytical Method for Detuning Periodic Pile Barriers [Volume 8, Issue 4, 2022, Pages 1480-1487]
Gard, Bahman Using the Matrix Method to Compute the Degrees of Freedom of Mechanisms [Volume 3, Issue 3, 2017, Pages 158-170]
Garg, Ruchika Performance Analysis of Segmentation of Hyperspectral Images Based on Color Image Segmentation [Volume 3, Issue 2, 2017, Pages 144-149]
Garziera, Rinaldo Wave Motion and Stop-Bands in Pipes with Helical Characteristics Using Wave Finite Element Analysis [Volume 4, Special Issue: Applied and Computational Issues in Structural Engineering, 2018, Pages 420-428]
Gaur, Himanshu A New Stress Based Approach for Nonlinear Finite Element Analysis [Volume 5, Special Issue: Computational Methods for Material Failure, 2019, Pages 563-576]
Gayatri, Mocherla Nonlinear Convective Flow of Maxwell Fluid over a Slendering Stretching Sheet with Heat Source/Sink [Volume 8, Issue 1, 2022, Pages 60-70]
Ghaderi, Abbasali Reliability Analysis of Nanocomposite Beams Reinforced with CNTs under Buckling Forces Using the Conjugate HL-RF [Volume 2, Issue 4, 2016, Pages 200-207]
Ghadjari, Hossein Effect of Variable Thermal Expansion Coefficient and Nanofluid Properties on Steady Natural Convection in an Enclosure [Volume 3, Issue 4, 2017, Pages 240-250]
Ghadle, Kirtiwant P. Some New Existence, Uniqueness and Convergence Results for Fractional Volterra-Fredholm Integro-Differential Equations [Volume 5, Issue 1, 2019, Pages 58-69]
Ghaemi Osgouie, Kambiz Using the Matrix Method to Compute the Degrees of Freedom of Mechanisms [Volume 3, Issue 3, 2017, Pages 158-170]
Ghaffari, Reihaneh Effect of Variable Thermal Expansion Coefficient and Nanofluid Properties on Steady Natural Convection in an Enclosure [Volume 3, Issue 4, 2017, Pages 240-250]
Ghahremani, Esmaeil Effect of Variable Thermal Expansion Coefficient and Nanofluid Properties on Steady Natural Convection in an Enclosure [Volume 3, Issue 4, 2017, Pages 240-250]
Ghahremani, Esmaeil Transient Natural Convection in an Enclosure with Variable Thermal Expansion Coefficient and Nanofluid Properties [Volume 4, Issue 3, 2018, Pages 133-139]
Ghahremani, Saeed Evaluating the Delamination in the Drilling Process of a Melamine Coated Medium Density Fiberboard (MDF) [Volume 8, Issue 1, 2022, Pages 1-10]
Ghalambaz, Mehdi Buckling Analysis of Cantilever Nanoactuators Immersed in an Electrolyte: A Close Form Solution Using Duan-Rach Modified Adomian Decomposition Method [Volume 1, Issue 4, 2015, Pages 207-219]
Ghalambaz, Mohammad Buckling Analysis of Cantilever Nanoactuators Immersed in an Electrolyte: A Close Form Solution Using Duan-Rach Modified Adomian Decomposition Method [Volume 1, Issue 4, 2015, Pages 207-219]
Ghalami, Mehran Buckling and Vibration Analysis of Tapered Circular Nano Plate [Volume 4, Issue 1, 2018, Pages 40-54]
Ghanbarzadeh, Afshin Bearing Fault Detection Based on Maximum Likelihood Estimation and Optimized ANN Using the Bees Algorithm [Volume 1, Issue 1, 2015, Pages 35-43]
Ghannadpour, Seyyed Amir Mahdi Ritz Method Application to Bending, Buckling and Vibration Analyses of Timoshenko Beams via Nonlocal Elasticity [Volume 4, Issue 1, 2018, Pages 16-26]
Gharagozloo, Mohammad Hossein Chaos Control in Gear Transmission System using GPC and SMC ‎Controllers [Volume 8, Issue 2, 2022, Pages 545-556]
Gharechahi, Raziyeh High Order Compact Finite Difference Schemes for Solving Bratu-Type Equations [Volume 5, Issue 1, 2019, Pages 91-102]
Gharib, Ahmad Thermal-Hydraulics analysis of pressurized water reactor core by using single heated channel model [Volume 3, Issue 3, 2017, Pages 192-198]
Ghobadi, Moslem Electrochemical and Mechanical Properties of Ni/g-C3N4 ‎Nanocomposite Coatings with Enhanced Corrosion Protective ‎Properties: A Case Study for Modeling the Corrosion Resistance ‎by ANN and ANFIS Models [Volume 9, Issue 3, 2023, Pages 590-606]
Gholami Motlagh, Vahid Optimization of Air Distribution Patterns by Arrangements of ‎Air Inlets and Outlets: Case Study of an Operating Room [Volume 8, Issue 3, 2022, Pages 809-830]
Ghommem, Mehdi Smart Gas Sensors: Materials, Technologies, Practical ‎Applications, and Use of Machine Learning – A Review [Volume 9, Issue 3, 2023, Pages 775-803]
Ghugal, Yuwaraj M. Bending Analysis of Thick Isotropic Plates by Using 5th Order Shear Deformation Theory [Volume 2, Issue 2, 2016, Pages 80-95]
Ghugal, Yuwaraj M. Bending of Shear Deformable Plates Resting on Winkler Foundations According to Trigonometric Plate Theory [Volume 4, Issue 3, 2018, Pages 187-201]
Ghumare, Shantaram A New Quasi-3D Model for Functionally Graded Plates [Volume 5, Issue 2, 2019, Pages 367-380]
Gilani, Syed I.U. Assessment of the Turbine Location for Optimum Performance of the Solar Vortex Engine as a Replacement to the Tall Chimney Solar Updraft Power Plant Design [Volume 10, Issue 1, 2024, Pages 38-54]
Gireesha, B.J. Theoretical Study of Convective Heat Transfer in Ternary ‎Nanofluid Flowing past a Stretching Sheet [Volume 8, Issue 4, 2022, Pages 1279-1286]
Gómez-Aguilar, J.F. Numerical Solution of the Time Fractional Reaction-advection-diffusion Equation in Porous Media [Volume 8, Issue 1, 2022, Pages 84-96]
Gómez-Aguilar, J.F. Application of Atangana-Baleanu Fractional Derivative to ‎Carbon Nanotubes Based Non-Newtonian Nanofluid: ‎Applications in Nanotechnology [Volume 6, Special Issue, 2020, Pages 1260-1269]
Gómez-Aguilar, José Francisco Numerical Solution of Caputo-Fabrizio Time Fractional Distributed Order Reaction-diffusion Equation via Quasi Wavelet based Numerical Method [Volume 6, Issue 4, 2020, Pages 848-861]
Gómez-Aguilar, José Francisco Laplace Variational Iteration Method for Modified Fractional Derivatives with Non-singular Kernel [Volume 6, Issue 3, 2020, Pages 684-698]
Godoy, Luis A. Quasi-bifurcation and Imperfection-sensitivity of Cylindrical ‎Shells under Pressures due to an Explosion [Volume 7, Issue 2, 2021, Pages 984-992]
Gokul Raj, P. Computational Fluid Dynamic Analysis of Amphibious Unmanned Aerial Vehicle [Volume 8, Issue 2, 2022, Pages 475-484]
Golabi, Sa’id Optimum Design of Liquified Natural Gas Bi-lobe Tanks using Finite Element, Genetic Algorithm and Neural Network [Volume 6, Issue 4, 2020, Pages 862-877]
Golmakani, M.E. Thermal Buckling Analysis of Circular Bilayer Graphene Sheets Resting on an Elastic Matrix Based on Nonlocal Continuum Mechanics [Volume 7, Issue 4, 2021, Pages 1862-1877]
Golmohamadi, A.M. Mesoscopic Simulation of Forced Convective Heat Transfer of Carreau-Yasuda Fluid Flow over an Inclined Square: Temperature-dependent Viscosity [Volume 6, Issue 2, 2020, Pages 307-319]
Gomes, Herbert Martins Proportional Topology Optimization under ‎Reliability-based Constraints [Volume 8, Issue 1, 2022, Pages 319-330]
Gomes, Herbert Martins A Novel BESO Methodology for Topology Optimization of ‎Reinforced Concrete Structures: A Two-loop Approach [Volume 9, Issue 2, 2023, Pages 498-512]
Gomes, Mateus das Neves WaveMIMO Methodology: Numerical Wave Generation of a ‎Realistic Sea State‎ [Volume 7, Issue 4, 2021, Pages 2129-2148]
Gonçalves, Aparecido Carlos Prognosis and Detection of Experimental Failures in Open Field Diesel ‎Engines Applying Wiener's Artificial Immunological Systems [Volume 7, Issue 1, 2021, Pages 1-12]
Gonçalves, Aparecido Carlos Analysis and Recognition of Standards in Intelligent Hybrid ‎Systems using Natural Computing [Volume 7, Issue 3, 2021, Pages 1764-1773]
Gong, Xianglin An Analysis of Nonlinear Beam Vibrations with the Extended ‎Rayleigh-Ritz Method [Volume 8, Issue 4, 2022, Pages 1299-1306]
Goodarzimehr, Vahid A Hybrid Particle Swarm Optimization and Genetic Algorithm for Truss Structures with Discrete Variables [Volume 6, Issue 3, 2020, Pages 593-604]
Goqo, S.P. Magnetohydrodynamic Bio-convective Casson Nanofluid Flow: A Numerical Simulation by Paired Quasilinearisation [Volume 7, Issue 4, 2021, Pages 2024-2039]
Gorji, Hamid Experimental Study on the Surface Modification by Electrical Discharge Process [Volume 5, Issue 2, 2019, Pages 249-257]
Gorobets, Valery Numerical Modeling of Heat Transfer and Hydrodynamics in Compact Shifted Arrangement Small Diameter Tube Bundles [Volume 7, Issue 1, 2021, Pages 292-301]
Gorobets, Valery Experimental and Numerical Investigation of Heat and Mass ‎Transfer Processes for Determining the Optimal Design of an ‎Accumulator with Phase Transformations [Volume 7, Issue 2, 2021, Pages 611-620]
Govardhan, K. MHD Casson Nanofluid Past a Stretching Sheet with the Effects of Viscous Dissipation, Chemical Reaction and Heat Source/Sink [Volume 7, Issue 4, 2021, Pages 2040-2048]
Govind Neelan, Arun Higher-Order Slope Limiters for Euler Equation [Volume 8, Issue 3, 2022, Pages 904-917]
Grigoryev, Mikhail Dynamic Response of a Step Loaded Cubic Cavity Embedded in a ‎Partially Saturated Poroelastic Half-space by the Boundary ‎Element Method [Volume 8, Issue 1, 2022, Pages 331-339]
Groşan, Teodor Comments on the paper “Nonlinear Convective Flow of Maxwell ‎Fluid over a Slendering Stretching Sheet with Heat Source/Sink, ‎Mocherla Gayatri, Konda Jayaramireddy, Macherla Jayachandra ‎Babu, J. Appl. Comput. Mech., 8(1), 2022, 60-70”‎ [Volume 8, Issue 3, 2022, Pages 1032-1034]
Guida, Domenico A General Multibody Approach for the Linear and Nonlinear Stability Analysis of Bicycle Systems. Part I: Methods of Constrained Dynamics [Volume 7, Issue 2, 2021, Pages 655-670]
Guida, Domenico A General Multibody Approach for the Linear and Nonlinear Stability Analysis of Bicycle Systems. Part II: Application to the Whipple-Carvallo Bicycle Model [Volume 7, Issue 2, 2021, Pages 671-700]
Guida, Domenico On the Analytical and Computational Methodologies for Modelling Two-wheeled Vehicles within the Multibody Dynamics Framework: A Systematic Literature Review [Volume 8, Issue 1, 2022, Pages 153-181]
Guida, Domenico Multibody Modeling and Nonlinear Control of a Pantograph Scissor Lift Mechanism [Volume 9, Issue 1, 2023, Pages 129-167]
Guida, Domenico A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part I: Analytical Methods and Computational Algorithms [Volume 9, Issue 2, 2023, Pages 529-549]
Guida, Domenico A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part II: Numerical Analysis and Experimental Testing [Volume 9, Issue 2, 2023, Pages 550-589]
Gunasekar, Aishwarya Frequency Separation in Architected Structures using Inverse Methods [Volume 7, Issue 4, 2021, Pages 2084-2095]
Guo, Bin Design of Cooling Water System (CWS) for CRAFT Lower Hybrid ‎Current Driven (LHCD) System‎ [Volume 7, Issue 2, 2021, Pages 470-477]
Guo, Ya-Nan Different Groups of Variational Principles for Whitham-Broer-‎Kaup Equations in Shallow Water [Volume 6, Special Issue, 2020, Pages 1178-1183]
Guo, Ya-Nan Variational Principles for Two Compound Nonlinear Equations ‎with Variable Coefficients [Volume 7, Issue 2, 2021, Pages 415-421]
Gupta, Bivek A New Class of Linear Canonical Wavelet Transform [Volume 10, Issue 1, 2024, Pages 64-79]
Gupta, Shishir Modelling of Love Waves in Fluid Saturated Porous Viscoelastic Medium resting over an Exponentially Graded Inhomogeneous Half-space Influenced by Gravity [Volume 6, Issue 3, 2020, Pages 517-530]
Gupta, Vipin Thermoelastic Modeling with Dual Porosity Interacting with an Inviscid Liquid [Volume 10, Issue 1, 2024, Pages 111-124]
Gupta, Yogesh Multiple Solutions for Slip Effects on Dissipative Magneto-Nanofluid Transport Phenomena in Porous Media: Stability Analysis [Volume 6, Issue 4, 2020, Pages 956-967]
Gupta, Yogesh Numerical Scheme based on Non-polynomial Spline Functions for ‎the System of Second Order Boundary Value Problems arising in ‎Various Engineering Applications [Volume 8, Issue 1, 2022, Pages 144-152]
Gurbanov, Nurlan Theory and Experiment in Predicting the Strength of Hybrid ‎Fiber Metal Laminates [Volume 9, Issue 4, 2023, Pages 987-999]
Guruprasad, P.J. Simple Two Variable Refined Theory for Shear Deformable Isotropic Rectangular Beams [Volume 6, Issue 3, 2020, Pages 394-415]
Gutierrez, Albio D. A Reduced-Order Simulation Methodology for Nanosecond-Pulsed Plasmas in a Backward-Facing ‎Step Supersonic Combustor Configuration [Volume 9, Issue 1, 2023, Pages 181-194]
Günerhan, H. Rotating Cylinder Turbulator Effect on the Heat Transfer of a ‎Nanofluid Flow in a Wavy Divergent Channel‎ [Volume 7, Issue 4, 2021, Pages 1987-1998]
Guzei, Dmitriy V. Flow Regimes Characteristics of Water-crude Oil in a Rectangular ‎Y-microchannel [Volume 8, Issue 2, 2022, Pages 655-670]
Guzei, D.V. Numerical Investigation of Enhanced Oil Recovery from various ‎Rocks by Nanosuspensions Flooding [Volume 8, Issue 1, 2022, Pages 306-318]
Guzei, D.V. Verification and Validation of a Network Algorithm for Single-phase Flow Modeling using Microfluidic Experiments [Volume 9, Issue 4, 2023, Pages 1156-1167]

H

Hachim, Abdelilah Numerical Analysis of the Effect of External Circumferential Elliptical Cracks in Transition Thickness Zone of Pressurized Pipes Using XFEM [Volume 5, Issue 5, 2019, Pages 861-874]
Hadad, Kamal VOC level control by ventilation improvement of Flexography printing room using CFD modeling [Volume 3, Issue 3, 2017, Pages 171-177]
Hader, Ahmed Scaling Law of Permeability and Porosity for Fluid Transport ‎Phenomena in Porous PCM Media [Volume 7, Issue 1, 2021, Pages 84-92]
Hadj Djelloul, Nasser Dine Numerical Study of the Dynamic Response of Elevated Steel ‎Conical Tank under Vertical Seismic Excitation - Case Study [Volume 9, Issue 2, 2023, Pages 445-457]
Hadji, Lazreg Free Vibration Analysis of FG Porous Sandwich Plates under ‎Various Boundary Conditions [Volume 7, Issue 2, 2021, Pages 505-519]
Hadji, Lazreg Investigation of the Static Bending Response of FGM Sandwich Plates [Volume 10, Issue 1, 2024, Pages 26-37]
Haghpanah, Seyyed Arash Musculoskeletal Modeling and Control of the Human Upper Limb during Manual Wheelchair Propulsion: Application in Functional Electrical Stimulation Rehabilitation Therapy [Volume 10, Issue 1, 2024, Pages 92-110]
Hai, N.Q. Free Vibration Analysis of Quintic Nonlinear Beams using Equivalent Linearization Method with a Weighted Averaging [Volume 5, Issue 1, 2019, Pages 46-57]
Hajipour, Alireza A Review of Recent Studies on Simulations for Flow around High-Speed Trains [Volume 5, Issue 2, 2019, Pages 311-333]
Hajiyeva, Nazile Algorithm for Determining the Permeability and Compaction ‎Properties of a Gas Condensate Reservoir based on a Binary Model [Volume 8, Issue 3, 2022, Pages 1014-1022]
Hajizadeh, Ahmad Transient Electro-osmotic Slip Flow of an Oldroyd-B Fluid with Time-fractional Caputo-Fabrizio Derivative [Volume 5, Issue 4, 2019, Pages 779-790]
Hajj, Muhammad R. VIV Control Strategies Using Displacement-Based ‎Phenomenological Model [Volume 7, Special Issue, 2021, Pages 1090-1097]
Hajmohammad, Mohammad Hadi Dynamic Buckling of Embedded Laminated Nanocomposite Plates Based on Sinusoidal Shear Deformation Theory [Volume 2, Issue 4, 2016, Pages 254-261]
Hakeem, A K Abdul Effect of Exponentially Variable Viscosity and Permeability on Blasius Flow of Carreau Nano Fluid over an Electromagnetic Plate through a Porous Medium [Volume 5, Issue 2, 2019, Pages 390-401]
H. Ali, Farooq Effect of Two Baffles on MHD Natural Convection in U-Shape ‎Superposed by Solid Nanoparticle having Different Shapes [Volume 6, Special Issue, 2020, Pages 1200-1209]
Hamdi Cherif, Mountassir Exact Solution for Nonlinear Local Fractional Partial Differential Equations [Volume 6, Issue 2, 2020, Pages 200-208]
Hamoud, Ahmed A. Some New Existence, Uniqueness and Convergence Results for Fractional Volterra-Fredholm Integro-Differential Equations [Volume 5, Issue 1, 2019, Pages 58-69]
Hamzehei-Javaran, Saleh Time-Discontinuous Finite Element Analysis of Two-Dimensional Elastodynamic Problems using Complex Fourier Shape Functions [Volume 4, Special Issue: Applied and Computational Issues in Structural Engineering, 2018, Pages 442-456]
Hamzehei-Javaran, Saleh Improvement of Numerical Manifold Method using Nine-node ‎Quadrilateral and Ten-node Triangular Elements along with ‎Complex Fourier RBFs in Modeling Free and Forced Vibrations [Volume 7, Issue 4, 2021, Pages 2049-2063]
Hansapinyo, Chayanon Forced-based Shear-flexure-interaction Frame Element for Nonlinear Analysis of Non-ductile Reinforced Concrete Columns [Volume 6, Special Issue, 2020, Pages 1151-1167]
Hansapinyo, Chayanon Nonlinear Winkler-based Frame Element with Inclusion of Shear-Flexure Interaction Effect for Analysis of Non-Ductile RC Members on Foundation [Volume 7, Issue 1, 2021, Pages 148-164]
Hao, Le Van Bernoulli-Euler Beam Unsteady Bending Model with ‎Consideration of Heat and Mass Transfer [Volume 9, Issue 1, 2023, Pages 168-180]
Haputhanthri, Udith Nonlinear Multiscale Modelling and Design using Gaussian Processes [Volume 7, Issue 3, 2021, Pages 1583-1592]
Harfash, Akil J. Poiseuille Flow with Couple Stresses Effect and No-slip Boundary Conditions [Volume 6, Special Issue, 2020, Pages 1069-1083]
Harfash, Assma Perturbation-Iteration Algorithm for Solving Heat and Mass Transfer in the Unsteady Squeezing Flow between Parallel Plates [Volume 5, Issue 4, 2019, Pages 804-815]
Harish, Modalavalasa A Study on Effects of Thermal Radiative Dissipative MHD Non-Newtonian Nanofluid above an Elongating Sheet in Porous Medium [Volume 9, Issue 4, 2023, Pages 945-954]
Harish Babu, D Melting Heat Transfer and Radiation Effects on Jeffrey Fluid Flow over a Continuously Moving Surface with a Parallel Free Stream [Volume 5, Issue 2, 2019, Pages 468-476]
Hariti, Yassine Scaling Law of Permeability and Porosity for Fluid Transport ‎Phenomena in Porous PCM Media [Volume 7, Issue 1, 2021, Pages 84-92]
Harmand, Souad Analysis of Fluid Dynamics and Heat Transfer in a Rectangular Duct with Staggered Baffles [Volume 5, Issue 2, 2019, Pages 231-248]
HARMAND, SOUAD 3D Numerical Investigation of Heat Transfer Performance in Liquid-liquid Taylor Flow [Volume 10, Issue 1, 2024, Pages 183-204]
Hasan, Abu Sufian Modified Multi-level Residue Harmonic Balance Method for Solving Nonlinear Vibration Problem of Beam Resting on Nonlinear Elastic Foundation [Volume 5, Issue 4, 2019, Pages 627-638]
Hasan, Mohammad Sanjeed Numerical Investigation on Flow Transition through a Curved ‎Square Duct with Negative Rotation [Volume 7, Issue 3, 2021, Pages 1435-1447]
Hashemi, Seyed Hossein Thermodynamic Study of Water Activity of Single Strong Electrolytes [Volume 3, Issue 2, 2017, Pages 150-157]
Hashemi-Tilehnoee, Mehdi Viscous Dissipation Impact on Free Convection Flow of Cu-water Nanofluid in a Circular Enclosure with Porosity Considering Internal Heat Source [Volume 5, Issue 4, 2019, Pages 717-726]
Hashlamon, Iyad A New Adaptive Extended Kalman Filter for a Class of Nonlinear Systems [Volume 6, Issue 1, 2020, Pages 1-12]
Hassan, Amr Thermoelastic Memory-dependent Responses to an Infinite Medium ‎with a Cylindrical Hole and Temperature-dependent Properties [Volume 7, Issue 2, 2021, Pages 870-882]
Hassan Ahmed Hassan, Ahmed The Relations between the Various Critical Temperatures of Thin ‎FGM Plates [Volume 6, Special Issue, 2020, Pages 1404-1419]
Hassanzadeh, Mahdi Multi-objective Optimization of Shot-peening Parameters using ‎Design of Experiments and Finite Element Simulation: A ‎Statistical Model [Volume 8, Issue 3, 2022, Pages 838-852]
Hatami, Hossein Elastic-Plastic Analysis of Bending Moment – Axial Force Interaction in Metallic Beam of T-Section [Volume 5, Issue 1, 2019, Pages 162-173]
Hatami, M. Effect of Two Baffles on MHD Natural Convection in U-Shape ‎Superposed by Solid Nanoparticle having Different Shapes [Volume 6, Special Issue, 2020, Pages 1200-1209]
Hatami, M. Rotating Cylinder Turbulator Effect on the Heat Transfer of a ‎Nanofluid Flow in a Wavy Divergent Channel‎ [Volume 7, Issue 4, 2021, Pages 1987-1998]
Hazarika, Silpi Theoretical Investigation of Viscosity and Thermal Conductivity ‎of a Gas along a Non-isothermal Vertical Surface in Porous ‎Environment with Dissipative Heat: Numerical Technique [Volume 8, Issue 4, 2022, Pages 1236-1245]
He, Chun-Hui A Brief Review on the Asymptotic Methods for the Periodic ‎Behaviour of Microelectromechanical Systems [Volume 8, Issue 3, 2022, Pages 1120-1140]
He, Ji-Huan Variational Principle for the Generalized KdV-Burgers Equation with Fractal Derivatives for Shallow Water Waves [Volume 6, Issue 4, 2020, Pages 735-740]
He, Ji-Huan A Simple Approach to Volterra-Fredholm Integral Equations [Volume 6, Special Issue, 2020, Pages 1184-1186]
He, Ji-Huan Two Modifications of the Homotopy Perturbation Method for ‎Nonlinear Oscillators [Volume 6, Special Issue, 2020, Pages 1420-1425]
He, Ji-Huan A Variational Principle for a Nonlinear Oscillator Arising in the ‎Microelectromechanical System [Volume 7, Issue 1, 2021, Pages 78-83]
He, Ji-Huan A Brief Review on the Asymptotic Methods for the Periodic ‎Behaviour of Microelectromechanical Systems [Volume 8, Issue 3, 2022, Pages 1120-1140]
He, Ji-Huan Efficacy of a Modulated Viscosity-dependent Temperature/nanoparticles Concentration Parameter on a ‎Nonlinear Radiative Electromagneto-nanofluid Flow along an Elongated Stretching Sheet [Volume 9, Issue 3, 2023, Pages 848-860]
He, Ji-Huan A New Taylor Series based Numerical Method: Simple, Reliable, and Promising [Volume 9, Issue 4, 2023, Pages 1122-1134]
He, Wei Sealing Performance of the End Fitting of a Marine Unbonded Flexible Pipe under Pressure Penetration [Volume 6, Issue 3, 2020, Pages 543-553]
Hedayati, Ali Optimization of Spark Ignition Engine Performance using a New ‎Double Intake Manifold: Experimental and Numerical Analysis [Volume 9, Issue 1, 2023, Pages 1-14]
Hedayati, Nima Investigation of Visco-rheological Properties of Polymeric Fluid on Electrothermal Pumping [Volume 10, Issue 1, 2024, Pages 164-182]
Heidari, Hamidreza Nonlinear Primary Frequency Response Analysis of Self-‎Sustaining Nanobeam Considering Surface Elasticity [Volume 8, Issue 4, 2022, Pages 1196-1207]
Hekmat, Mohamad Hamed Thermal Performance of Oscillating Blade with Various ‎Geometries in a Straight Channel [Volume 8, Issue 1, 2022, Pages 114-128]
Hematiyan, Mohammad Rahim Failure Procedure in Adhesive Composite Joints under Different Types of Loading [Volume 5, Issue 4, 2019, Pages 647-651]
Hepijid, Thanathorn A Study of Curved Louver Fin Configuration for ‎Heat Transfer Enhancement [Volume 8, Issue 2, 2022, Pages 754-763]
Herath, Sumudu Nonlinear Multiscale Modelling and Design using Gaussian Processes [Volume 7, Issue 3, 2021, Pages 1583-1592]
Herrera, Rafael Discretization of the 2D Convection–Diffusion Equation Using ‎Discrete Exterior Calculus [Volume 6, Special Issue, 2020, Pages 1348-1363]
Herskovits, Jose Damage Identification in a Multi-DOF System under Uncertainties Using Optimization Algorithms [Volume 4, Issue 4, 2018, Pages 365-374]
Hevko, Roman The Dynamics of the Working Body of the Tubular Conveyor with ‎the Chain Drive [Volume 7, Issue 3, 2021, Pages 1710-1718]
Heydari, Mohammad Haar Wavelet Method for Solving High-Order Differential Equations with Multi-Point Boundary Conditions [Volume 8, Issue 2, 2022, Pages 528-544]
Heydari Beni, Mohsen Buckling and Free Vibration Analysis of Fiber Metal-laminated Plates Resting on Partial Elastic Foundation [Volume 6, Issue 1, 2020, Pages 37-51]
Heydari Beni, Mohsen Experimental and Numerical Buckling Analysis of Carbon Fiber Composite Lattice Conical Structure before and after Lateral Impact [Volume 6, Issue 4, 2020, Pages 813-822]
Hida, Nahid Nonlinear Biodynamic Models of the Hand-arm System and ‎Parameters Identification using the Vibration Transmissibility or ‎the Driving-point Mechanical Impedance [Volume 7, Issue 2, 2021, Pages 944-955]
Hieu, Dang Free Vibration Analysis of Quintic Nonlinear Beams using Equivalent Linearization Method with a Weighted Averaging [Volume 5, Issue 1, 2019, Pages 46-57]
Hieu, Dang Van Nonlinear Vibration of an Electrostatically Actuated ‎Functionally Graded Microbeam under Longitudinal Magnetic ‎Field [Volume 7, Issue 3, 2021, Pages 1537-1549]
HILLSTROM, Rajshree Biomechanical Evaluation of Bone Quality Effect on Stresses at Bone-Implant Interface: A Finite Element Study [Volume 7, Issue 3, 2021, Pages 1266-1275]
Hincapié Isaza, John Alexander Analysis of a Jet Pump Performance under Different Primary Nozzle ‎Positions and Inlet Pressures using two Approaches: One Dimensional ‎Analytical Model and Three Dimensional CFD Simulations‎ [Volume 6, Special Issue, 2020, Pages 1228-1244]
H. Kadhum, Abdul Amir Two-Dimensional Numerical Study of the Transient Flow ‎Conditions in Complete Shock Tunnel‎ [Volume 7, Issue 2, 2021, Pages 956-964]
Hoa, Nguyen Thi Nonlinear Vibration of an Electrostatically Actuated ‎Functionally Graded Microbeam under Longitudinal Magnetic ‎Field [Volume 7, Issue 3, 2021, Pages 1537-1549]
Hojaji, Mohammad An Experimental Comparison between Wing Root and Wingtip ‎Corrugation Patterns of Dragonfly Wing at Ultra-low Reynolds ‎Number and High Angles of Attack‎ [Volume 8, Issue 4, 2022, Pages 1176-1185]
Hoseini Asl, Mehrdad 3D Optimization of Gear Train Layout Using Particle Swarm Optimization Algorithm [Volume 6, Issue 4, 2020, Pages 823-840]
Hosen, Md Alal A Modified Energy Balance Method to Obtain Higher-order Approximations to the Oscillators with Cubic and Harmonic Restoring Force [Volume 6, Issue 2, 2020, Pages 320-331]
Hossain, Md. Anwar Analysis of Dual Solutions of Unsteady Micropolar Hybrid ‎Nanofluid Flow over a Stretching/Shrinking Sheet [Volume 7, Issue 1, 2021, Pages 19-33]
Hosseini, Kamyar Numerical Simulation of Fuzzy Volterra Integro-differential ‎Equation using Improved Runge-Kutta Method [Volume 9, Issue 1, 2023, Pages 72-82]
Hosseini, Mahmood Experimental and Numerical Investigations on the Effect of Rectangular Openings’ Aspect Ratio on Outflow Discharge [Volume 4, Special Issue: Applied and Computational Issues in Structural Engineering, 2018, Pages 457-466]
Hosseini, Mojtaba Elastic-Plastic Analysis of Bending Moment – Axial Force Interaction in Metallic Beam of T-Section [Volume 5, Issue 1, 2019, Pages 162-173]
Hosseini Ravandi, S.A. Size-dependent Nonlinear Forced Vibration Analysis of Viscoelastic/Piezoelectric Nano-beam [Volume 7, Issue 4, 2021, Pages 1878-1891]
Hosseinzadeh, Narges Haar Wavelet Method for Solving High-Order Differential Equations with Multi-Point Boundary Conditions [Volume 8, Issue 2, 2022, Pages 528-544]
Hou, Chun Kit Jeffery Neural Networks with Input Dimensionality Reduction for ‎Efficient Temperature Distribution Prediction in a Warm ‎Stamping Process [Volume 8, Issue 4, 2022, Pages 1431-1444]
Hou, Shi-Cheng Different Groups of Variational Principles for Whitham-Broer-‎Kaup Equations in Shallow Water [Volume 6, Special Issue, 2020, Pages 1178-1183]
Hu, Jiansheng Design of Cooling Water System (CWS) for CRAFT Lower Hybrid ‎Current Driven (LHCD) System‎ [Volume 7, Issue 2, 2021, Pages 470-477]
Huang, Bin An Analysis of Nonlinear Beam Vibrations with the Extended ‎Rayleigh-Ritz Method [Volume 8, Issue 4, 2022, Pages 1299-1306]
Huang, Qi The Integrated Analysis of Vibrations of Quartz Crystal Plates ‎through Artificial Coupling Factors [Volume 7, Issue 1, 2021, Pages 69-77]
Huang, Zemin How Wavelike Bumps Mitigate the Vortex-induced Vibration of a ‎Drilling Riser [Volume 7, Issue 3, 2021, Pages 1413-1424]
Hui, Nirmal Baran Analysis and Optimization of Truss Structures, Constrained ‎Handling using Genetic Algorithm [Volume 7, Issue 3, 2021, Pages 1324-1333]
Husnine, Syed Muhammad Heat and Mass Transfer of Natural Convective Flow with Slanted ‎Magnetic Field via Fractional Operators [Volume 7, Issue 1, 2021, Pages 189-212]
Hussain, Anwar On Stokes' Second Problem for Burgers' Fluid over a Plane Wall [Volume 7, Issue 3, 2021, Pages 1514-1526]
Hussein, Maha A. The Optimal Design of Heat Sinks: A Review [Volume 6, Issue 4, 2020, Pages 1030-1043]

I

Ibrahim, Shaik Mohammed A Study on Effects of Thermal Radiative Dissipative MHD Non-Newtonian Nanofluid above an Elongating Sheet in Porous Medium [Volume 9, Issue 4, 2023, Pages 945-954]
Iftikhar, Nazish Heat and Mass Transfer of Natural Convective Flow with Slanted ‎Magnetic Field via Fractional Operators [Volume 7, Issue 1, 2021, Pages 189-212]
Igaadi, Amal Numerical Investigation into the Effects of Orientation on ‎Subcooled Flow Boiling Characteristics [Volume 9, Issue 2, 2023, Pages 464-474]
Igumnov, Leonid A. Investigation of Wood Properties at Elevated Temperature [Volume 8, Issue 1, 2022, Pages 298-305]
Igumnov, Leonid Dynamic Response of a Step Loaded Cubic Cavity Embedded in a ‎Partially Saturated Poroelastic Half-space by the Boundary ‎Element Method [Volume 8, Issue 1, 2022, Pages 331-339]
Igumnov, Leonid The Direct Impact Method for Studying Dynamic Behavior of ‎Viscoplastic Materials [Volume 8, Issue 2, 2022, Pages 597-604]
Igumnov, Leonid Experimental Study and Identification of a Dynamic ‎Deformation Model of Dry Clay at Strain Rates up to 2500 s-1‎ [Volume 8, Issue 3, 2022, Pages 981-995]
Ilegbusi, Adeleke Heat Transfer Analysis of Nanofluid Flow with Porous Medium through Jeffery Hamel Diverging/Converging Channel [Volume 6, Issue 3, 2020, Pages 433-444]
Ilegbusi, Adeleke Thermal Analysis of Radiating Film Flow of Sodium Alginate ‎using MWCNT Nanoparticles ‎ [Volume 8, Issue 1, 2022, Pages 219-231]
ILGAMOV, Marat A. Influence of Pressure on the Frequency Spectrum of Micro and ‎Nanoresonators on Hinged Supports [Volume 7, Issue 2, 2021, Pages 977-983]
Il‘in, Alexander A Case Study of Combined Application of Smart Materials in a ‎Thermal Energy Harvester with Vibrating Action [Volume 7, Issue 1, 2021, Pages 372-381]
Imeni Markhali, Milad Characterization of the Nonlinear Biaxial Mechanical Behavior ‎of Human Ureter using Constitutive Modeling and Artificial ‎Neural Networks [Volume 8, Issue 4, 2022, Pages 1186-1195]
Imjai, Thanongsak Forced-based Shear-flexure-interaction Frame Element for Nonlinear Analysis of Non-ductile Reinforced Concrete Columns [Volume 6, Special Issue, 2020, Pages 1151-1167]
Imjai, Thanongsak Shear-flexure Interaction Frame Model on Kerr-type Foundation ‎for Analysis of Non-ductile RC Members on Foundation [Volume 8, Issue 3, 2022, Pages 1076-1090]
Impiombato, Andrea Natale Prediction Capabilities of a One-dimensional Wall-flow ‎Particulate Filter Model [Volume 8, Issue 1, 2022, Pages 245-259]
Impiombato, Andrea Natale Constructal Design of an Idealize Arterial Bypass Graft: Effect of ‎the Bypass Attachment Pointon Resistance to Flow‎ [Volume 7, Issue 1, 2021, Pages 334-344]
Imran, Muhammad Effects of Non-Linear Thermal Radiation and Chemical Reaction ‎on Time Dependent Flow of Williamson Nanofluid With Combine ‎Electrical MHD and Activation Energy [Volume 7, Issue 2, 2021, Pages 546-558]
Indeitsev, Dmitry Hemispherical Resonator of a Rate-integrating Gyroscope: A ‎Novel Method for Determination of Eigenfrequencies and ‎Eigenforms in Presence of Imperfections‎ [Volume 9, Issue 4, 2023, Pages 915-925]
Indumathi, N. Heat Transfer of Hybrid-nanofluids Flow Past a Permeable Flat Surface with Different Volume Fractions [Volume 8, Issue 1, 2022, Pages 21-35]
Inman, Daniel J. Temperature Dependent Damping in Additively Manufactured ‎Polymer Structures [Volume 7, Special Issue, 2021, Pages 993-1008]
Inman, Daniel J. Frequency Separation in Architected Structures using Inverse Methods [Volume 7, Issue 4, 2021, Pages 2084-2095]
Ipek, Cengiz Vibration Analysis of Shear Deformable Cylindrical Shells Made ‎of Heterogeneous Anisotropic Material with Clamped Edges [Volume 9, Issue 3, 2023, Pages 861-869]
Ipek, Cengiz Buckling Behavior of Nanocomposite Plates with Functionally ‎Graded Properties under Compressive Loads in Elastic and ‎Thermal Environments [Volume 9, Issue 4, 2023, Pages 974-986]
Ipinnimo, Olufemi Dynamic Analysis of the Biomechanical Model of Head Load Impact Using Differential Transform Method [Volume 6, Issue 4, 2020, Pages 893-907]
Irschik, Hans Structural Health Monitoring of Multi-Storey Frame Structures using Piezoelectric Incompatibility Filters: Theory and Numerical Verification [Volume 7, Special Issue, 2021, Pages 1138-1157]
Irschik, Hans Stress Control of a Piezoelectric Lumped-element Model − ‎Theoretical Investigation and Experimental Realization [Volume 7, Special Issue, 2021, Pages 1110-1120]
Isametov, Aysen Computational and Experimental Study of the Composite ‎Material for the Centrifugal Pump Impellers Manufacturing [Volume 8, Issue 4, 2022, Pages 1407-1421]
Isametova, Madina Computational and Experimental Study of the Composite ‎Material for the Centrifugal Pump Impellers Manufacturing [Volume 8, Issue 4, 2022, Pages 1407-1421]
Isametova, Madina Selection of Optimal Planetary Transmission for Light Electric Vehicle Main Gearbox [(Articles in Press)]
Isaza Merino, Cesar Augusto Fluid-dynamic Simulations for Assessment of Dimensioning ‎Methodologies of Pelton Turbine Buckets Considering the Initial ‎Torque Overcoming [Volume 9, Issue 4, 2023, Pages 1036-1048]
Ishak, Anuar Insight into Stability Analysis on Modified Magnetic Field of ‎Radiative Non-Newtonian Reiner–Philippoff Fluid Model‎ [Volume 8, Issue 2, 2022, Pages 745-753]
Islam, Saeed Comparative Study of Plane Poiseuille Flow of Non-isothermal ‎Couple ‎Stress Fluid of Reynold Viscosity Model using Optimal ‎Homotopy ‎Asymptotic Method and New Iterative Method [Volume 7, Issue 2, 2021, Pages 404-414]
Islam, Shariful An analytical Technique for Solving New Computational ‎Solutions of the Modified Zakharov-Kuznetsov ‎Equation Arising ‎in Electrical Engineering [Volume 7, Issue 2, 2021, Pages 715-726]
Ismail, Gamal An Analytical Technique for Solving Nonlinear Oscillators of the Motion of a Rigid Rod Rocking Bock and Tapered Beams [Volume 2, Issue 1, 2016, Pages 29-34]
Ismail, Gamal Periodic Solutions of the Duffing Harmonic Oscillator by He's Energy Balance Method [Volume 2, Issue 1, 2016, Pages 35-41]
Ismail, Gamal A Modified Energy Balance Method to Obtain Higher-order Approximations to the Oscillators with Cubic and Harmonic Restoring Force [Volume 6, Issue 2, 2020, Pages 320-331]
Ismail, S. O. Analytical Investigations of the Effects of Tool Pin Profile and Process Parameters on the Peak Temperature in Friction Stir Welding [Volume 3, Issue 2, 2017, Pages 114-124]
Ismaila, M. A. Modeling of heat generations for different tool profiles in friction stir welding: study of tool geometry and contact conditions [Volume 3, Issue 1, 2017, Pages 37-59]
Ismayilov, Mahmud Theory and Experiment in Predicting the Strength of Hybrid ‎Fiber Metal Laminates [Volume 9, Issue 4, 2023, Pages 987-999]
Isoldi, Liércio André A Novel BESO Methodology for Topology Optimization of ‎Reinforced Concrete Structures: A Two-loop Approach [Volume 9, Issue 2, 2023, Pages 498-512]
Isoldi, Liércio André Multiobjective Geometric Analysis of Stiffened Plates under ‎Bending through Constructal Design Method [Volume 6, Special Issue, 2020, Pages 1438-1449]
Isoldi, Liércio André Numerical Study and Geometric Investigation of Corrugated ‎Channels Subjected to Forced Convective Flows [Volume 7, Issue 2, 2021, Pages 727-738]
Isoldi, Liércio André Applicability Evidence of Constructal Design in Structural ‎Engineering: Case Study of Biaxial Elasto-Plastic Buckling of ‎Square Steel Plates with Elliptical Cutout [Volume 7, Issue 2, 2021, Pages 922-934]
Isoldi, Liércio André WaveMIMO Methodology: Numerical Wave Generation of a ‎Realistic Sea State‎ [Volume 7, Issue 4, 2021, Pages 2129-2148]
Iuzhina, Tatiana N. Investigation of Wood Properties at Elevated Temperature [Volume 8, Issue 1, 2022, Pages 298-305]
Ivanov, Vladimir Matrix Equations of the Motion of Multibody Systems with a Tree Structure in Hamiltonian Variables [Volume 9, Issue 4, 2023, Pages 1107-1121]
Ivanova, Jordanka Two-dimensional Stress and strain Analysis for Graphene-‎polymer Nanocomposite under Axial Load [Volume 8, Issue 3, 2022, Pages 1065-1075]
Ivanova, S.V. Numerical Investigation of Enhanced Oil Recovery from various ‎Rocks by Nanosuspensions Flooding [Volume 8, Issue 1, 2022, Pages 306-318]
Izadpanah, Ebrahim Time-Discontinuous Finite Element Analysis of Two-Dimensional Elastodynamic Problems using Complex Fourier Shape Functions [Volume 4, Special Issue: Applied and Computational Issues in Structural Engineering, 2018, Pages 442-456]
Izadpanah, Ehsan Thermal Performance of Oscillating Blade with Various ‎Geometries in a Straight Channel [Volume 8, Issue 1, 2022, Pages 114-128]

J

Jaamialahmadi, Abdolrahman An investigation the effects of geometric tolerances on the natural frequencies of rotating shafts [Volume 1, Issue 2, 2015, Pages 103-111]
Jafari, Akbar Stress Intensity Factor Expression for Welded Butt Joint with Undercut and Inclined Lack of Penetration Defects considering the Effect of Joint Shape [Volume 6, Issue 4, 2020, Pages 878-892]
Jafari, Saeed Investigation of Nanoﬂuid Natural Convection Heat Transfer in ‎Open Ended L-shaped Cavities utilizing LBM [Volume 7, Issue 4, 2021, Pages 2064-2083]
Jafari, Sanaz Elastic Limit Angular Velocity and Acceleration Investigation in Non-‎Uniform Rotating Disk under Time-Dependent Mechanical Loading [Volume 8, Issue 3, 2022, Pages 791-808]
Jafarian, Farshid Experimental Investigation and Optimizing Geometrical Characteristics and Surface Quality in Drilling of AISI H13 Steel [Volume 6, Issue 2, 2020, Pages 332-343]
Jafari Fesharaki, Javad Elastic Behavior of Functionally Graded Two Tangled Circles Chamber [Volume 5, Issue 4, 2019, Pages 667-679]
Jafari Fesharaki, Javad 3D Optimization of Gear Train Layout Using Particle Swarm Optimization Algorithm [Volume 6, Issue 4, 2020, Pages 823-840]
Jahangiri, Mehran Clogged Impeller Diagnosis in the Centrifugal Pump Using the Vibration and Motor Current Analysis [Volume 4, Issue 4, 2018, Pages 310-317]
Jahanian, Omid Potential of Semi-Empirical Heat Transfer Models in Predicting ‎the Effects of Equivalence Ratio on Low Temperature Reaction ‎and High Temperature Reaction Heat Release of an HCCI Engine [Volume 9, Issue 1, 2023, Pages 45-57]
Jain, Amit Kumar Modified Rectangular Patch Antenna Loaded With Multiple C Slots for Multiple Applications [Volume 2, Issue 3, 2016, Pages 192-199]
Jain, Amit Kumar Modified U-Slot Stacked Micro-Strip Patch Antenna for Ultra-Wideband Applications in S Band, C Band and X Band [Volume 3, Issue 4, 2017, Pages 293-301]
Jain, Shilpi Performance Analysis of Segmentation of Hyperspectral Images Based on Color Image Segmentation [Volume 3, Issue 2, 2017, Pages 144-149]
Jalali, Ali Mesoscopic Simulation of Forced Convective Heat Transfer of Carreau-Yasuda Fluid Flow over an Inclined Square: Temperature-dependent Viscosity [Volume 6, Issue 2, 2020, Pages 307-319]
Jalali, Ali Optimization of Spark Ignition Engine Performance using a New ‎Double Intake Manifold: Experimental and Numerical Analysis [Volume 9, Issue 1, 2023, Pages 1-14]
Jalili Ghazizadeh, Mohammadreza Experimental and Numerical Investigations on the Effect of Rectangular Openings’ Aspect Ratio on Outflow Discharge [Volume 4, Special Issue: Applied and Computational Issues in Structural Engineering, 2018, Pages 457-466]
Jamalbayli, Tayfun Algorithm for Determining the Permeability and Compaction ‎Properties of a Gas Condensate Reservoir based on a Binary Model [Volume 8, Issue 3, 2022, Pages 1014-1022]
Jamalbayov, Mahammad Algorithm for Determining the Permeability and Compaction ‎Properties of a Gas Condensate Reservoir based on a Binary Model [Volume 8, Issue 3, 2022, Pages 1014-1022]
Jamali, Majid Uniaxial Buckling Analysis Comparison of Nanoplate and Nanocomposite Plate with Central Square Cut out Using Domain Decomposition Method [Volume 2, Issue 4, 2016, Pages 230-242]
Jamil, Muhammad Traveling Wave Solutions of 3D Fractionalized MHD Newtonian Fluid in Porous Medium with Heat Transfer [Volume 6, Issue 4, 2020, Pages 968-984]
Jankowski, Łukasz On/off Nodal Reconfiguration for Global Structural Control of ‎Smart 2D Frames [Volume 7, Special Issue, 2021, Pages 1121-1129]
Jarndal, Anwar On the Usefulness of Pre-processing Methods in Rotating ‎Machines Faults Classification using Artificial Neural Network [Volume 7, Issue 1, 2021, Pages 254-261]
Jassim, Bashaeer K. Numerical Simulation of Non-Newtonian Inelastic Flows in Channel based on Artificial Compressibility Method [Volume 6, Issue 2, 2020, Pages 271-283]
Jassim, Hassan Kamil Fractional Sumudu Decomposition Method for Solving PDEs of Fractional Order [Volume 7, Issue 1, 2021, Pages 302-311]
Javaherdeh, Kourosh Temperature Effect on Moving Water Droplets at the Channel of ‎PEMFC by Multi-component Multiphase Lattice Boltzmann Method [Volume 9, Issue 3, 2023, Pages 607-622]
Javanian Jouybari, Hamid Determination of Periodic Solution for Tapered Beams with Modified Iteration Perturbation Method [Volume 1, Issue 1, 2015, Pages 44-51]
Javaniyan Jouybari, Hamid Solution of strongly nonlinear oscillator problem arising in Plasma Physics with Newton Harmonic Balance Method [Volume 1, Issue 2, 2015, Pages 59-66]
Javanmard, Mohsen Magnetohydrodynamics Fluid Flow and Heat Transfer over a Permeable Shrinking Sheet with Joule dissipation: Analytical Approach [Volume 6, Issue 4, 2020, Pages 999-1011]
Javidpoor, Sara Time integration of rectangular membrane free vibration using spline-based differential quadrature [Volume 2, Issue 2, 2016, Pages 74-79]
Jayachandra Babu, Macherla Nonlinear Convective Flow of Maxwell Fluid over a Slendering Stretching Sheet with Heat Source/Sink [Volume 8, Issue 1, 2022, Pages 60-70]
Jayakumar, V. Effect of Tool Shoulder and Pin Cone Angles in Friction Stir Welding using Non-circular Tool Pin [Volume 6, Issue 3, 2020, Pages 554-563]
Jayaprakash, R. Heat Transfer of Hybrid-nanofluids Flow Past a Permeable Flat Surface with Different Volume Fractions [Volume 8, Issue 1, 2022, Pages 21-35]
Jayaramireddy, Konda Nonlinear Convective Flow of Maxwell Fluid over a Slendering Stretching Sheet with Heat Source/Sink [Volume 8, Issue 1, 2022, Pages 60-70]
Jayesimi, Lawrence Olumide Modeling of heat generations for different tool profiles in friction stir welding: study of tool geometry and contact conditions [Volume 3, Issue 1, 2017, Pages 37-59]
Jayesimi, Lawrence Olumide Analytical Investigations of the Effects of Tool Pin Profile and Process Parameters on the Peak Temperature in Friction Stir Welding [Volume 3, Issue 2, 2017, Pages 114-124]
Jena, Rajarama Mohan Residual Power Series Method for Solving Time-fractional Model of Vibration Equation of Large Membranes [Volume 5, Issue 4, 2019, Pages 603-615]
Jena, Rajarama Mohan Dynamic Response Analysis of Fractionally Damped Beams Subjected to External Loads using Homotopy Analysis Method [Volume 5, Issue 2, 2019, Pages 355-366]
Jena, Subrat Kumar Dynamic Response Analysis of Fractionally Damped Beams Subjected to External Loads using Homotopy Analysis Method [Volume 5, Issue 2, 2019, Pages 355-366]
Jerves, Alex X. A Nonlinear Lagrangian Model for Plane Frames Pre-design [Volume 9, Issue 3, 2023, Pages 884-899]
Jeyar, Mohammed Random Walk Particle Tracking for Convection-diffusion ‎Dominated Problems in Shallow Water Flows [Volume 7, Issue 2, 2021, Pages 486-495]
Jia, Qing Comprehensive Investigating on the Aerodynamic Influences of the Wheel Contact Patch [Volume 6, Issue 4, 2020, Pages 934-955]
Jiann, Lim Yeou Mathematical Modelling of MHD Blood Flow with Gold Nanoparticles in Slip Small Arteries [Volume 10, Issue 1, 2024, Pages 125-139]
Jing, D. Effect of Two Baffles on MHD Natural Convection in U-Shape ‎Superposed by Solid Nanoparticle having Different Shapes [Volume 6, Special Issue, 2020, Pages 1200-1209]
Jing, Dengwei Rotating Cylinder Turbulator Effect on the Heat Transfer of a ‎Nanofluid Flow in a Wavy Divergent Channel‎ [Volume 7, Issue 4, 2021, Pages 1987-1998]
Jing, Huimin An Analysis of Nonlinear Beam Vibrations with the Extended ‎Rayleigh-Ritz Method [Volume 8, Issue 4, 2022, Pages 1299-1306]

K

Kabeel, A Vibration Analysis of Material Size-Dependent CNTs Using Energy Equivalent Model [Volume 4, Issue 2, 2018, Pages 75-86]
Kabganian, Mansour Design of an Adaptive-Neural Network Attitude Controller of a Satellite using Reaction Wheels [Volume 1, Issue 2, 2015, Pages 67-73]
Kabi, Amer Time integration of rectangular membrane free vibration using spline-based differential quadrature [Volume 2, Issue 2, 2016, Pages 74-79]
Kaci, Abdelhakim Buckling Analysis of Embedded Nanosize FG Beams Based on a Refined Hyperbolic Shear Deformation Theory [Volume 4, Issue 3, 2018, Pages 140-146]
Kadhim, Hakim T. Local Thermal Non-equilibrium Analysis of Cu-Al2O3 Hybrid ‎Nanofluid Natural Convection in a Partially Layered Porous ‎Enclosure with Wavy Walls [Volume 9, Issue 3, 2023, Pages 712-727]
KADIOĞLU, Fethi An Alternative Procedure for Longitudinal Vibration Analysis of ‎Bars with Arbitrary Boundary Conditions [Volume 9, Issue 1, 2023, Pages 294-301]
Kadir, Ali Multiple Solutions for Slip Effects on Dissipative Magneto-Nanofluid Transport Phenomena in Porous Media: Stability Analysis [Volume 6, Issue 4, 2020, Pages 956-967]
Kadivar, Mohammad Hassan Failure Procedure in Adhesive Composite Joints under Different Types of Loading [Volume 5, Issue 4, 2019, Pages 647-651]
Kadmim, Habeeb Fractional Sumudu Decomposition Method for Solving PDEs of Fractional Order [Volume 7, Issue 1, 2021, Pages 302-311]
Kakavand, Farshad Vibration Analysis of Different Types of Porous FG Conical Sandwich Shells in Various Thermal Surroundings [Volume 6, Issue 3, 2020, Pages 416-432]
Kalivanan, K. Slip Effects on Ohmic Dissipative Non-Newtonian Fluid Flow in the Presence of Aligned Magnetic Field [Volume 6, Issue 2, 2020, Pages 296-306]
Kalmaganbetov, Sanzhar Armanuly Selection of Optimal Planetary Transmission for Light Electric Vehicle Main Gearbox [(Articles in Press)]
Kalyasov, Pavel Method of Unsteady Hydrodynamic Characteristics ‎Determination in Turbulent Boundary Layer [Volume 7, Issue 2, 2021, Pages 849-857]
Kamal, M.A.S. A Modified Energy Balance Method to Obtain Higher-order Approximations to the Oscillators with Cubic and Harmonic Restoring Force [Volume 6, Issue 2, 2020, Pages 320-331]
Kamdi, Dilip B Thermoelastic Analysis of Functionally Graded Hollow Cylinder Subjected to Uniform Temperature Field [Volume 2, Issue 2, 2016, Pages 118-127]
Kamel, Mohamed Miscellaneous Modeling Approaches and Testing of a Satellite Honeycomb Sandwich Plate [Volume 6, Special Issue, 2020, Pages 1084-1097]
Kameswaran, Peri K. Rotating Cylinder Turbulator Effect on the Heat Transfer of a ‎Nanofluid Flow in a Wavy Divergent Channel‎ [Volume 7, Issue 4, 2021, Pages 1987-1998]
Kamil Jassim, Hassan A Novel Approach for Korteweg-de Vries Equation of Fractional Order [Volume 5, Issue 2, 2019, Pages 192-198]
Kamiyo, Ola Multi-boiling Heat Transfer Analysis of a Convective Straight Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 3, Issue 4, 2017, Pages 229-239]
Karaivanov, Dimitar Computational and Experimental Study of the Composite ‎Material for the Centrifugal Pump Impellers Manufacturing [Volume 8, Issue 4, 2022, Pages 1407-1421]
Karami, Fatemeh Power Law Nanofluid through Tapered Artery based on a ‎Consistent Couple Stress Theory [Volume 9, Issue 3, 2023, Pages 623-636]
Karanjule, D. B. Determination of the Optimal Reduction Ratio for Least Springback during Cold Drawing of Seamless Tubes [Volume 4, Issue 4, 2018, Pages 275-285]
Kareem, Rasaq Analysis of Transient Rivlin-Ericksen Fluid and Irreversibility of Exothermic Reactive Hydromagnetic Variable Viscosity [Volume 6, Issue 1, 2020, Pages 26-36]
Kari, Mohammadreza Calculation of Backscattered Ultrasonic Waves Field from a ‎Copper-clad Steel Rod Immersing in Water and Effect of Clad ‎Corrosion and Interfacial Disbond between Clad and Rod Defects ‎on this Field using the Finite Element Method [Volume 9, Issue 1, 2023, Pages 58-71]
Karimnejad, Sajjad Mesoscopic Simulation of Forced Convective Heat Transfer of Carreau-Yasuda Fluid Flow over an Inclined Square: Temperature-dependent Viscosity [Volume 6, Issue 2, 2020, Pages 307-319]
Karimnejad, Sajjad An Exact Analytical Solution for Heat Conduction in a ‎Functionally Graded Conical Shell [Volume 9, Issue 2, 2023, Pages 302-317]
Karpov, Alexander I. Prediction of the Supersonic Flow Base Pressure by Axisymmetric ‎Direct Numerical Simulation [Volume 9, Issue 3, 2023, Pages 739-748]
Karskanov, Sergey A. Prediction of the Supersonic Flow Base Pressure by Axisymmetric ‎Direct Numerical Simulation [Volume 9, Issue 3, 2023, Pages 739-748]
Kassem, Magda M. Behavior of Nanofluid with Variable Brownian and Thermal ‎Diffusion Coefficients Adjacent to a Moving Vertical Plate [Volume 7, Issue 3, 2021, Pages 1466-1479]
Kassem, Mohammed Miscellaneous Modeling Approaches and Testing of a Satellite Honeycomb Sandwich Plate [Volume 6, Special Issue, 2020, Pages 1084-1097]
Katiyar, Vinod Kumar A Numerical Simulation of Inspiratory Airflow in Human Airways during Exercise at Sea Level and at High Altitude [Volume 5, Issue 1, 2019, Pages 70-76]
Katsikadelis, John T. Saint-Venant torsion of non-homogeneous anisotropic bars [Volume 2, Issue 1, 2016, Pages 42-53]
Kazemi, Reza A Comparative Study on the Efficiency of Compiled Languages ‎and MATLAB/Simulink for Simulation of Highly Nonlinear ‎Automotive Systems [Volume 8, Issue 3, 2022, Pages 853-864]
Kazemi, Reza Time Distance: A Novel Collision Prediction and Path Planning Method [Volume 9, Issue 3, 2023, Pages 656-677]
Kazemi Jouybari, Ammar Numerical and Analytical Approach for Film Condensation on Different Forms of Surfaces [Volume 5, Issue 5, 2019, Pages 964-975]
Kazemzadeh Hannani, Siamak Numerical Study on the Ferrofluid Droplet Splitting in a T-junction ‎with Branches of Unequal Widths using Asymmetric Magnetic Field‎ [Volume 9, Issue 2, 2023, Pages 357-370]
Kedar, G. D. Springbackward Phenomenon of a Transversely Isotropic Functionally Graded Composite Cylindrical Shell [Volume 2, Issue 3, 2016, Pages 134-143]
Kelly, Ger Impact Dynamics of Nonlinear Materials: FE Analysis [Volume 9, Issue 3, 2023, Pages 728-738]
Keshava Reddy, E. Multivariate Jeffrey Fluid Flow past a Vertical Plate through Porous Medium [Volume 6, Issue 3, 2020, Pages 605-616]
Keshtegar, Behrooz Conjugate and Directional Chaos Control Methods for Reliability Analysis of CNT–Reinforced Nanocomposite Beams under Buckling Forces; A Comparative Study [Volume 2, Issue 3, 2016, Pages 144-151]
Keshtegar, Behrooz Reliability Analysis of Nanocomposite Beams Reinforced with CNTs under Buckling Forces Using the Conjugate HL-RF [Volume 2, Issue 4, 2016, Pages 200-207]
Khademalrasoul, Abdolghafoor Local and Global Approaches to Fracture Mechanics Using Isogeometric Analysis Method [Volume 1, Issue 4, 2015, Pages 168-180]
Khademalrasoul, Abdolghafour NURBS-Based Isogeometric Analysis Method Application to Mixed-Mode Computational Fracture Mechanics [Volume 5, Issue 2, 2019, Pages 217-230]
Khademi, Alireza Heat Transfer Improvement in a Thermal Energy Storage System ‎using Auxiliary Fluid Instead of Nano-PCM in an Inclined ‎Enclosure: A Comparative Study [Volume 9, Issue 2, 2023, Pages 475-486]
Khajehdehi Kavanroodi, Mehdi Buckling and Vibration Analysis of a Double-layer Graphene ‎Sheet Coupled with a Piezoelectric Nanoplate [Volume 8, Issue 1, 2022, Pages 129-143]
Khajezade Roodi, Mostafa Optimization of Spark Ignition Engine Performance using a New ‎Double Intake Manifold: Experimental and Numerical Analysis [Volume 9, Issue 1, 2023, Pages 1-14]
KHAKIMOV, Akim G. Influence of Pressure on the Frequency Spectrum of Micro and ‎Nanoresonators on Hinged Supports [Volume 7, Issue 2, 2021, Pages 977-983]
Khalil, Khalil M. Thermoelastic Vibrations of Nonlocal Nanobeams Resting on a ‎Pasternak Foundation via DPL Model [Volume 7, Issue 1, 2021, Pages 34-44]
Khalil, Munam New Exact Traveling Wave Solutions for Fractional Order System ‎Describing the Second Grade Fluid through Medium with Heat ‎Transfer‎ [Volume 7, Issue 2, 2021, Pages 764-781]
Khalili, S. Mohammad Reza Low Velocity Impact Response of Laminated Composite Truncated Sandwich Conical Shells with Various Boundary Conditions Using Complete Model and GDQ Method [Volume 3, Issue 1, 2017, Pages 1-15]
Khalili, S. Mohammad Reza Free Vibration of a Thick Sandwich Plate Using Higher Order Shear Deformation Theory and DQM for Different Boundary Conditions [Volume 3, Issue 1, 2017, Pages 16-24]
Khalsa, Lalsingh Quasi-Static Transient Thermal Stresses in an Elliptical Plate due to Sectional Heat Supply on the Curved Surfaces over the Upper Face [Volume 4, Issue 1, 2018, Pages 27-39]
K. Hamzah, Hameed Effect of Two Baffles on MHD Natural Convection in U-Shape ‎Superposed by Solid Nanoparticle having Different Shapes [Volume 6, Special Issue, 2020, Pages 1200-1209]
Khan, Afrasyab Experimental Study of the Heat Transfer Enhancement in Concentric Tubes With Spherical and Pyramidal Protrusions [Volume 6, Issue 4, 2020, Pages 801-812]
Khan, Alamgeer Comparative Study of Plane Poiseuille Flow of Non-isothermal ‎Couple ‎Stress Fluid of Reynold Viscosity Model using Optimal ‎Homotopy ‎Asymptotic Method and New Iterative Method [Volume 7, Issue 2, 2021, Pages 404-414]
Khan, Bilal Applications of Higher-Order Derivatives to the Subclasses of ‎Meromorphic Starlike Functions [Volume 7, Issue 1, 2021, Pages 321-333]
Khan, B. Md. Hidayathulla Viscoelastic Micropolar Convection Flows from an Inclined Plane with Nonlinear Temperature: A Numerical Study [Volume 6, Issue 2, 2020, Pages 183-199]
Khan, B. Md. Hidayathulla Melting Heat Transfer Analysis on Magnetohydrodynamics Buoyancy Convection in an Enclosure: A Numerical Study [Volume 6, Issue 1, 2020, Pages 52-62]
Khan, Ishaque Quasi-Static Transient Thermal Stresses in an Elliptical Plate due to Sectional Heat Supply on the Curved Surfaces over the Upper Face [Volume 4, Issue 1, 2018, Pages 27-39]
Khan, Masood On Stokes' Second Problem for Burgers' Fluid over a Plane Wall [Volume 7, Issue 3, 2021, Pages 1514-1526]
Khan, Nazar Applications of Higher-Order Derivatives to the Subclasses of ‎Meromorphic Starlike Functions [Volume 7, Issue 1, 2021, Pages 321-333]
Khan, Saeed Ullah A Kinetic Flux-vector Splitting Scheme for Two-layer Shallow Flow Model [Volume 8, Issue 3, 2022, Pages 1043-1053]
Khan, Sudheer Diffusion-thermo Effects in Stagnation Point Flow of Second ‎Grade Fluid past a Stretching Plate [Volume 7, Issue 2, 2021, Pages 902-912]
Khan, Tufail A. Modified Variational Iteration Technique for the Numerical ‎Solution of Fifth Order KdV-type Equations [Volume 6, Special Issue, 2020, Pages 1220-1227]
Khan, Umar Jeffery Hamel Flow of a non-Newtonian Fluid [Volume 2, Issue 1, 2016, Pages 21-28]
Khan, Yasir Analytical Solution of Linear, Quadratic and Cubic Model of PTT Fluid [Volume 1, Issue 4, 2015, Pages 220-228]
Khandan, Amirsalar Nanostructure, Molecular Dynamics Simulation and Mechanical Performance of PCL Membranes Reinforced with Antibacterial Nanoparticles [Volume 7, Issue 4, 2021, Pages 1907-1915]
Khashi’ie, Najiyah Safwa Insight into Stability Analysis on Modified Magnetic Field of ‎Radiative Non-Newtonian Reiner–Philippoff Fluid Model‎ [Volume 8, Issue 2, 2022, Pages 745-753]
Khatami, Iman Efficient Solution of Nonlinear Duffing Oscillator [Volume 6, Issue 2, 2020, Pages 219-234]
Khatibi, Mohammad Mahdi Estimating the Mode Shapes of a Bridge Using Short Time Transmissibility Measurement from a Passing Vehicle [Volume 5, Issue 4, 2019, Pages 735-748]
Khayat, Morteza Numerical Investigation on Slot air Jet impingement Heat Transfer between Horizontal Concentric Circular Cylinders [Volume 1, Issue 2, 2015, Pages 74-82]
Khelifi, Cherif Structural Strength Analysis and Fabrication of a Straight Blade of an H-Darrieus Wind Turbine [Volume 7, Issue 3, 2021, Pages 1276-1282]
Khodadadi, Touraj‎ Numerical Simulation of Fuzzy Volterra Integro-differential ‎Equation using Improved Runge-Kutta Method [Volume 9, Issue 1, 2023, Pages 72-82]
Khojasteh Manesh, Masoud Numerical Investigation of the Effect of Bubble-Bubble Interaction on the Power of Propagated Pressure Waves [Volume 5, Issue 2, 2019, Pages 181-191]
Khorashadizadeh, Mojtaba Mesoscopic Simulation of Forced Convective Heat Transfer of Carreau-Yasuda Fluid Flow over an Inclined Square: Temperature-dependent Viscosity [Volume 6, Issue 2, 2020, Pages 307-319]
Khoroshilov, Valeriy Analysis of Possibilities to Use Predictive Mathematical Models ‎for Studying the Dam Deformation State [Volume 8, Issue 2, 2022, Pages 733-744]
Khunkitti, Pirat Design of Doubly Salient Permanent Magnet Generator for ‎Output Power Enhancement using Structural Modification [Volume 7, Issue 4, 2021, Pages 2171-2178]
Khurana, Ekanshu Computational Fluid Dynamic Analysis of Amphibious Unmanned Aerial Vehicle [Volume 8, Issue 2, 2022, Pages 475-484]
Khurana, Meenakshi Magneto-bio-thermal Convection in Rotating Nanoliquid ‎containing Gyrotactic Microorganism [Volume 7, Issue 4, 2021, Pages 1973-1986]
Khute, Sahadasan Computational Fluid Dynamic Analysis of Amphibious Unmanned Aerial Vehicle [Volume 8, Issue 2, 2022, Pages 475-484]
Kiarasi, Faraz Numerical and Experimental Investigation on Post-buckling ‎Behavior of Stiffened Cylindrical Shells with Cutout subject to ‎Uniform Axial Compression [Volume 9, Issue 1, 2023, Pages 25-44]
Kim Thoa, Nguyen Thi Nonlinear Vibration of an Electrostatically Actuated ‎Functionally Graded Microbeam under Longitudinal Magnetic ‎Field [Volume 7, Issue 3, 2021, Pages 1537-1549]
Kirilova, Elisaveta Two-dimensional Stress and strain Analysis for Graphene-‎polymer Nanocomposite under Axial Load [Volume 8, Issue 3, 2022, Pages 1065-1075]
Kirinus, Eduardo de Paula WaveMIMO Methodology: Numerical Wave Generation of a ‎Realistic Sea State‎ [Volume 7, Issue 4, 2021, Pages 2129-2148]
Kiselev, Dmitry E. Impact-enhanced Electrostatic Vibration Energy Harvester [Volume 8, Issue 2, 2022, Pages 671-683]
Kittichaikarn, Chawalit A Study of Curved Louver Fin Configuration for ‎Heat Transfer Enhancement [Volume 8, Issue 2, 2022, Pages 754-763]
Kobeleva, Natalia Analysis of Possibilities to Use Predictive Mathematical Models ‎for Studying the Dam Deformation State [Volume 8, Issue 2, 2022, Pages 733-744]
Kocsis Szürke, Szabolcs Numerical Optimization of Battery Heat Management of Electric Vehicles [Volume 9, Issue 4, 2023, Pages 1076-1092]
Koguchi, Hideo Singular Stresses at a Vertex and Along a Singular Line in Three-‎dimensional Piezoelectric Bonded Joints [Volume 6, Special Issue, 2020, Pages 1364-1370]
Kolahchi, Reza Analytical bending solution of fully clamped orthotropic rectangular plates resting on elastic foundations by the finite integral transform method [Volume 1, Issue 2, 2015, Pages 52-58]
Konstantinov, Aleksandr The Direct Impact Method for Studying Dynamic Behavior of ‎Viscoplastic Materials [Volume 8, Issue 2, 2022, Pages 597-604]
Koochi, Ali Scale-Dependent Dynamic Behavior of Nanowire-Based Sensor in Accelerating Field [Volume 5, Issue 2, 2019, Pages 486-497]
Kopp, Michael I. The Impact of Marangoni Convection and Radiation on Flow of ‎Ternary Nanofluid in a Porous Medium with Mass Transpiration [Volume 9, Issue 2, 2023, Pages 487-497]
Korolev, Stanislav A. Prediction of the Supersonic Flow Base Pressure by Axisymmetric ‎Direct Numerical Simulation [Volume 9, Issue 3, 2023, Pages 739-748]
Kostazos, Protesilaos Numerical Analysis of the Deformation of a Shearing Machine ‎Tool under Excessive Blade Clearance [Volume 7, Issue 2, 2021, Pages 496-504]
Kou, Lei Studying the Strengthening Effect of Railway Ballast in the ‎Direct Shear Test due to Insertion of Middle-size Ballast Particles [Volume 8, Issue 4, 2022, Pages 1387-1397]
Kouloughli, Imén Reducing Retrieval Time in Automated Storage and Retrieval System with a Gravitational Conveyor Based on Multi-Agent Systems [Volume 4, Issue 1, 2018, Pages 55-68]
KÖTEN, Hasan Mixed Convection Heat Transfer and Entropy Generation in a ‎Water-filled Square Cavity Partially Heated from Below: The ‎Effects of Richardson and Prandtl Numbers [Volume 8, Issue 1, 2022, Pages 282-297]
Kovács, Gábor Numerical Optimization of Battery Heat Management of Electric Vehicles [Volume 9, Issue 4, 2023, Pages 1076-1092]
Kozachenko, Tetiana Rotations of a Rigid Body Close to the Lagrange Case under the ‎Action of Nonstationary Perturbation Torque [Volume 8, Issue 3, 2022, Pages 1023-1031]
Krishnamoorthy, Gautham Accelerating the Convergence of Multiphase Flow Simulations ‎when Employing Non-Uniform Structured Grids [Volume 7, Issue 1, 2021, Pages 235-253]
Krishnaprasad, K. Numerical Modeling and Multi Objective Optimization of Face Milling of AISI 304 Steel [Volume 5, Issue 4, 2019, Pages 749-762]
Krommer, Michael Structural Health Monitoring of Multi-Storey Frame Structures using Piezoelectric Incompatibility Filters: Theory and Numerical Verification [Volume 7, Special Issue, 2021, Pages 1138-1157]
Kudenatti, Ramesh B. Numerical Study of Three-dimensional Boundary-layer Flow over ‎a Wedge: Magnetic Field Analysis [Volume 8, Issue 3, 2022, Pages 876-890]
Kuharat, Sireetorn Non-similar Radiative Bioconvection Nanofluid Flow under ‎Oblique Magnetic Field with Entropy Generation‎ [Volume 8, Issue 1, 2022, Pages 206-218]
Kumar, A. Vanav Theoretical Study on Poiseuille Flow of Herschel-Bulkley Fluid in ‎Porous Media‎ [Volume 8, Issue 4, 2022, Pages 1246-1269]
Kumar, Bharath Unsteady Hydromagnetic Flow of Eyring-Powell Nanofluid over an Inclined Permeable Stretching Sheet with Joule Heating and Thermal Radiation [Volume 6, Issue 2, 2020, Pages 259-270]
Kumar, Manoj Comparative Study of Mixed Convective MHD Cu-Water Nanofluid Flow over a Cone and Wedge using Modified Buongiorno’s Model in Presence of Thermal Radiation and Chemical Reaction via Cattaneo-Christov Double Diffusion Model [Volume 7, Issue 3, 2021, Pages 1383-1402]
Kumar, Parthi Vijaya A Study on Effects of Thermal Radiative Dissipative MHD Non-Newtonian Nanofluid above an Elongating Sheet in Porous Medium [Volume 9, Issue 4, 2023, Pages 945-954]
Kumar, Rajesh Thermoelastic Modeling with Dual Porosity Interacting with an Inviscid Liquid [Volume 10, Issue 1, 2024, Pages 111-124]
Kumar, Sachin Numerical Solution of Caputo-Fabrizio Time Fractional Distributed Order Reaction-diffusion Equation via Quasi Wavelet based Numerical Method [Volume 6, Issue 4, 2020, Pages 848-861]
Kumar, Sachin Numerical Solution of the Time Fractional Reaction-advection-diffusion Equation in Porous Media [Volume 8, Issue 1, 2022, Pages 84-96]
Kumar, Sumit Sweep Blade Design for an Axial Wind Turbine using a Surrogate-‎assisted Differential Evolution Algorithm [Volume 9, Issue 1, 2023, Pages 217-225]
Kumhar, Raju Modelling of Love Waves in Fluid Saturated Porous Viscoelastic Medium resting over an Exponentially Graded Inhomogeneous Half-space Influenced by Gravity [Volume 6, Issue 3, 2020, Pages 517-530]
Kundu, Balaram Finite Integral Transform Based Solution of Second Grade Fluid Flow between Two Parallel Plates [Volume 5, Issue 5, 2019, Pages 989-997]
Kundu, Prabir Kumar Entropy Generation of Variable Viscosity and Thermal Radiation on Magneto Nanofluid Flow with Dusty Fluid [Volume 6, Issue 1, 2020, Pages 171-182]
Kundu, Prabir Kumar Impact of Microbial Activity and Stratification Phenomena on Generating/Absorbing Sutterby Nanofluid over a Darcy Porous Medium [Volume 9, Issue 3, 2023, Pages 804-819]
Kundu, Santimoy Love Wave Propagation in a Fiber-reinforced Layer with Corrugated Boundaries Overlying Heterogeneous Half-space [Volume 5, Issue 5, 2019, Pages 926-934]
Kundu, Santimoy Modelling of Love Waves in Fluid Saturated Porous Viscoelastic Medium resting over an Exponentially Graded Inhomogeneous Half-space Influenced by Gravity [Volume 6, Issue 3, 2020, Pages 517-530]
Kuprikov, Mikhail Yu. Moment-Inertial Factor as a Criterion for Assessing the ‎Dimension of an Aircraft [Volume 8, Issue 4, 2022, Pages 1307-1314]
Kuprikov, Nikita M. Moment-Inertial Factor as a Criterion for Assessing the ‎Dimension of an Aircraft [Volume 8, Issue 4, 2022, Pages 1307-1314]
Kurgan, Naci The Relations between the Various Critical Temperatures of Thin ‎FGM Plates [Volume 6, Special Issue, 2020, Pages 1404-1419]
Kurhan, Dmytro Modeling of the Dynamic Rail Deflection using Elastic Wave Propagation [Volume 8, Issue 1, 2022, Pages 379-387]
Kurpa, Lidiya Analysis of Free Vibration of Porous Power-law and Sigmoid Functionally Graded Sandwich Plates by the R-functions Method [Volume 9, Issue 4, 2023, Pages 1144-1155]
Kwon, MInho Forced-based Shear-flexure-interaction Frame Element for Nonlinear Analysis of Non-ductile Reinforced Concrete Columns [Volume 6, Special Issue, 2020, Pages 1151-1167]
Kwon, MInho Nonlinear Winkler-based Frame Element with Inclusion of Shear-Flexure Interaction Effect for Analysis of Non-Ductile RC Members on Foundation [Volume 7, Issue 1, 2021, Pages 148-164]

L

Laghari, Muzaffar Hussain Application of Atangana-Baleanu Fractional Derivative to ‎Carbon Nanotubes Based Non-Newtonian Nanofluid: ‎Applications in Nanotechnology [Volume 6, Special Issue, 2020, Pages 1260-1269]
Lakhi, Mohammad Designing and Creating a Mouse Using Nature-Inspired Shapes [Volume 6, Issue 4, 2020, Pages 841-847]
Lakhi, Mohammad Evaluating the Delamination in the Drilling Process of a Melamine Coated Medium Density Fiberboard (MDF) [Volume 8, Issue 1, 2022, Pages 1-10]
Lakrad, Faouzi Nonlinear Biodynamic Models of the Hand-arm System and ‎Parameters Identification using the Vibration Transmissibility or ‎the Driving-point Mechanical Impedance [Volume 7, Issue 2, 2021, Pages 944-955]
Lal, Achchhe Numerical Analysis of an Edge Crack Isotropic Plate with Void/Inclusions under Different Loading by Implementing XFEM [Volume 7, Issue 3, 2021, Pages 1362-1382]
Lalu, Octavian The Permutation Entropy and its Applications on Fire Tests Data [Volume 6, Special Issue, 2020, Pages 1380-1393]
Lamba, Navneet Kumar Thermoelastic Analysis of Functionally Graded Hollow Cylinder Subjected to Uniform Temperature Field [Volume 2, Issue 2, 2016, Pages 118-127]
Lamba, Navneet Kumar Impact of Memory-dependent Response of a Thermoelastic Thick Solid Cylinder [Volume 9, Issue 4, 2023, Pages 1135-1143]
Lamba, N. K. Springbackward Phenomenon of a Transversely Isotropic Functionally Graded Composite Cylindrical Shell [Volume 2, Issue 3, 2016, Pages 134-143]
La Regina, Rosario Multibody Modeling and Nonlinear Control of a Pantograph Scissor Lift Mechanism [Volume 9, Issue 1, 2023, Pages 129-167]
Latha, D.N. Non-similar Solutions of MHD Mixed Convection over an Exponentially Stretching Surface: Influence of Non-uniform Heat Source or Sink [Volume 7, Issue 3, 2021, Pages 1334-1347]
Latief, Fourier D.E. Two-Solid Deposition in Fluid Column using Immersed ‎Boundary-Lattice Boltzmann Method [Volume 7, Issue 3, 2021, Pages 1814-1825]
Lavimi, Roham An Experimental Comparison between Wing Root and Wingtip ‎Corrugation Patterns of Dragonfly Wing at Ultra-low Reynolds ‎Number and High Angles of Attack‎ [Volume 8, Issue 4, 2022, Pages 1176-1185]
Layek, G.C. Dufour and Soret Effects on Unsteady Heat and Mass Transfer for Powell-Eyring Fluid Flow over an Expanding Permeable Sheet [Volume 6, Issue 4, 2020, Pages 985-998]
Le, Ngoc Ly An Analytical Approach of Nonlinear Thermo-mechanical Buckling of Functionally Graded Graphene-reinforced Composite Laminated Cylindrical Shells under Compressive Axial Load Surrounded by Elastic Foundation [Volume 6, Issue 2, 2020, Pages 357-372]
Le, Pham Binh Free Vibration Analysis of Functionally Graded Porous Nano-‎plates with Different Shapes Resting on Elastic Foundation [Volume 7, Issue 3, 2021, Pages 1593-1605]
Lee, Changwoo Dynamic Investigation of Non-linear Behavior of Hydraulic Cylinder in Mold Oscillator using PID Control Process [Volume 7, Issue 1, 2021, Pages 270-276]
Lee, Jer Vui Thermomechanical Stresses of Multilayered Wellbore Structure ‎of Underground Hydrogen Storage – A Simplified Solution Based ‎on Recursive Algorithm [Volume 8, Issue 4, 2022, Pages 1287-1298]
Lee, T. S. Robust P-H∞ Integrated Controller for Flexible Link Manipulator ‎System in the Presence of Disturbance [Volume 7, Issue 2, 2021, Pages 646-654]
Lei, Hou Analytical Solution of Linear, Quadratic and Cubic Model of PTT Fluid [Volume 1, Issue 4, 2015, Pages 220-228]
Lei, Ying A Generalized Identification of Joint Structural State and ‎Unknown Inputs Using Data Fusion MKF-UI [Volume 7, Special Issue, 2021, Pages 1198-1204]
Lei, Yongjun Semi-Analytical Solution for Vibration of Nonlocal Piezoelectric Kirchhoff Plates Resting on Viscoelastic Foundation [Volume 4, Issue 3, 2018, Pages 202-215]
Lenci, Stefano Natural frequencies and internal resonance of beams with arbitrarily distributed axial loads [Volume 7, Special Issue, 2021, Pages 1009-1019]
Leonelli, Luca Driveline Stability in Racing Motorcycles: Analysis of a Three ‎Degrees of Freedom Minimal Model [Volume 9, Issue 2, 2023, Pages 404-418]
Leon-Medina, Jersson X. Manifold Learning Algorithms Applied to Structural Damage ‎Classification [Volume 7, Special Issue, 2021, Pages 1158-1166]
Leshchenko, Dmytro Rotations of a Rigid Body Close to the Lagrange Case under the ‎Action of Nonstationary Perturbation Torque [Volume 8, Issue 3, 2022, Pages 1023-1031]
Leshchenko, Dmytro Exact Solutions for Isobaric Inhomogeneous Couette Flows of a ‎Vertically Swirling Fluid [Volume 9, Issue 2, 2023, Pages 521-528]
Leshchenko, Dmytro Inhomogeneous Gradient Poiseuille Flows of a Vertically Swirled Fluid [Volume 10, Issue 1, 2024, Pages 1-12]
Le-Tran, Nhat An 8-Node Solid-Shell Finite Element based on Assumed Bending ‎Strains and Cell-Based Smoothed Membrane Strains for Static Analysis of Plates and Shells [Volume 6, Special Issue, 2020, Pages 1335-1347]
Lettieri, Antonio A General Multibody Approach for the Linear and Nonlinear Stability Analysis of Bicycle Systems. Part I: Methods of Constrained Dynamics [Volume 7, Issue 2, 2021, Pages 655-670]
Lettieri, Antonio A General Multibody Approach for the Linear and Nonlinear Stability Analysis of Bicycle Systems. Part II: Application to the Whipple-Carvallo Bicycle Model [Volume 7, Issue 2, 2021, Pages 671-700]
Levskii, Mikhail Valer’evich Application of Complex Functional of Quality in Optimal Control ‎of Spacecraft Motion [Volume 7, Issue 1, 2021, Pages 262-269]
Lewis, Roland W. Unsteady MHD Mixed Convection Flow of Water over a Sphere ‎with Mass Transfer [Volume 7, Issue 2, 2021, Pages 935-943]
Li, Feng Fatigue Life Analysis of Bus Body based on User Target Load Spectrum‎ [Volume 7, Issue 2, 2021, Pages 965-969]
Li, Guangning Laminar Flow Control and Drag Reduction using Biomimetically ‎Inspired Forward Facing Steps [Volume 7, Issue 2, 2021, Pages 752-763]
Li, Qiliang A Review of Recent Studies on Simulations for Flow around High-Speed Trains [Volume 5, Issue 2, 2019, Pages 311-333]
Li, Tian A Review of Recent Studies on Simulations for Flow around High-Speed Trains [Volume 5, Issue 2, 2019, Pages 311-333]
Li, Weibao Design of Cooling Water System (CWS) for CRAFT Lower Hybrid ‎Current Driven (LHCD) System‎ [Volume 7, Issue 2, 2021, Pages 470-477]
Li, Xiaochuan Study of the Vibration Characteristics of SA 330 Helicopter Planetary Main Gearbox [Volume 9, Issue 4, 2023, Pages 1093-1106]
Li, Xiaolin Fatigue Life Analysis of Bus Body based on User Target Load Spectrum‎ [Volume 7, Issue 2, 2021, Pages 965-969]
Li, Xuefeng Finite Element Solutions of Cantilever and Fixed Actuator Beams Using Augmented Lagrangian Methods [Volume 4, Issue 2, 2018, Pages 125-132]
Li, Xuefeng A General Purpose Variational Formulation for Boundary Value Problems of Orders Greater than Two [Volume 7, Issue 3, 2021, Pages 1788-1802]
Li, Yueming An Exact Analytical Solution for Heat Conduction in a ‎Functionally Graded Conical Shell [Volume 9, Issue 2, 2023, Pages 302-317]
Liguori, Aurelio Sizing the Actuators for a Dragon Fly Prototype [Volume 10, Issue 1, 2024, Pages 152-163]
Limkatanyu, Suchart Forced-based Shear-flexure-interaction Frame Element for Nonlinear Analysis of Non-ductile Reinforced Concrete Columns [Volume 6, Special Issue, 2020, Pages 1151-1167]
Limkatanyu, Suchart Nonlinear Winkler-based Frame Element with Inclusion of Shear-Flexure Interaction Effect for Analysis of Non-Ductile RC Members on Foundation [Volume 7, Issue 1, 2021, Pages 148-164]
Limkatanyu, Suchart Shear-flexure Interaction Frame Model on Kerr-type Foundation ‎for Analysis of Non-ductile RC Members on Foundation [Volume 8, Issue 3, 2022, Pages 1076-1090]
Linh, Nguyen Ngoc Weighted Dual Approach to an Equivalent Stiffness-based Load ‎Transfer Model for Jacked Open-ended Pile [Volume 7, Issue 3, 2021, Pages 1751-1763]
Lipanov, Alexey M. Prediction of the Supersonic Flow Base Pressure by Axisymmetric ‎Direct Numerical Simulation [Volume 9, Issue 3, 2023, Pages 739-748]
Lippiello, Maria Variational Derivation of Truncated Timoshenko-Ehrenfest Beam Theory [Volume 8, Issue 3, 2022, Pages 996-1004]
Liu, Bai-Nian Variational Principles and Solitary Wave Solutions of Generalized ‎Nonlinear Schrödinger Equation in the Ocean [Volume 7, Issue 3, 2021, Pages 1639-1648]
Liu, Hongjun A Fractal Rheological Model for SiC Paste using a Fractal Derivative [Volume 7, Issue 1, 2021, Pages 13-18]
Liu, Jianxing Studying the Strengthening Effect of Railway Ballast in the ‎Direct Shear Test due to Insertion of Middle-size Ballast Particles [Volume 8, Issue 4, 2022, Pages 1387-1397]
Liu, Jianxing Numerical Optimization of Battery Heat Management of Electric Vehicles [Volume 9, Issue 4, 2023, Pages 1076-1092]
Liu, Lijun A Generalized Identification of Joint Structural State and ‎Unknown Inputs Using Data Fusion MKF-UI [Volume 7, Special Issue, 2021, Pages 1198-1204]
Liu, Meng-Zhu Variational Principles for Two Compound Nonlinear Equations ‎with Variable Coefficients [Volume 7, Issue 2, 2021, Pages 415-421]
Liu, Meng-Zhu Variational Principles and Solitary Wave Solutions of Generalized ‎Nonlinear Schrödinger Equation in the Ocean [Volume 7, Issue 3, 2021, Pages 1639-1648]
Liu, Zhe Design of Cooling Water System (CWS) for CRAFT Lower Hybrid ‎Current Driven (LHCD) System‎ [Volume 7, Issue 2, 2021, Pages 470-477]
Liu, Zhiye Studying the Strengthening Effect of Railway Ballast in the ‎Direct Shear Test due to Insertion of Middle-size Ballast Particles [Volume 8, Issue 4, 2022, Pages 1387-1397]
Loghman, Abbas Magnetic Field Effects on the Elastic Behavior of Polymeric Piezoelectric Cylinder Reinforced with CNTs [Volume 2, Issue 4, 2016, Pages 222-229]
Lok, Sefika Ipek A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part I: Analytical Methods and Computational Algorithms [Volume 9, Issue 2, 2023, Pages 529-549]
Lok, Sefika Ipek A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part II: Numerical Analysis and Experimental Testing [Volume 9, Issue 2, 2023, Pages 550-589]
Lomunov, Andrey K. Investigation of Wood Properties at Elevated Temperature [Volume 8, Issue 1, 2022, Pages 298-305]
Lorenzini, Giulio Numerical Investigation on Flow Transition through a Curved ‎Square Duct with Negative Rotation [Volume 7, Issue 3, 2021, Pages 1435-1447]
Lorenzini, Giulio A Study on Effects of Thermal Radiative Dissipative MHD Non-Newtonian Nanofluid above an Elongating Sheet in Porous Medium [Volume 9, Issue 4, 2023, Pages 945-954]
Löser, Enrique Eduardo Self-damping of Optical Ground Wire‎ Cables: A Bayesian Approach [Volume 9, Issue 1, 2023, Pages 205-216]
Lourenço, Rodrigo Francisco Borges Analysis and Recognition of Standards in Intelligent Hybrid ‎Systems using Natural Computing [Volume 7, Issue 3, 2021, Pages 1764-1773]
Lu, Yiling Computational Analysis of Turbulent Flow over a Bluff Body with ‎Drag Reduction Devices [Volume 6, Special Issue, 2020, Pages 1210-1219]
Lu, Yiling Assessment of Drag Reduction Devices Mounted on a Simplified ‎Tractor-Trailer Truck Model [Volume 7, Issue 1, 2021, Pages 45-53]
Lu, Yiling Computational Study of Flow around 2D and 3D Tandem Bluff Bodies [Volume 7, Issue 2, 2021, Pages 528-534]
Luangarpa, Chonlada Singular Stresses at a Vertex and Along a Singular Line in Three-‎dimensional Piezoelectric Bonded Joints [Volume 6, Special Issue, 2020, Pages 1364-1370]
Luciano, Raimondo Linear dynamic response of nanobeams accounting for higher gradient effects [Volume 2, Issue 2, 2016, Pages 54-64]
Luciano, Raimondo Axial and Torsional Free Vibrations of Elastic Nano-Beams by Stress-Driven Two-Phase Elasticity [Volume 5, Issue 2, 2019, Pages 402-413]
Lukin, Alexei Hemispherical Resonator of a Rate-integrating Gyroscope: A ‎Novel Method for Determination of Eigenfrequencies and ‎Eigenforms in Presence of Imperfections‎ [Volume 9, Issue 4, 2023, Pages 915-925]
Lund, Alana Variational Inference for Nonlinear Structural ‎Identification [Volume 7, Special Issue, 2021, Pages 1218-1231]
Luo, Robert Keqi Multimode Fatigue Criteria for Filled Non-crystalizing Rubber ‎under Positive R Ratios [Volume 9, Issue 4, 2023, Pages 1049-1059]
Luong, Viet Dung Finite Element and Experimental Investigation on the Effect of ‎Repetitive Shock in Corrugated Cardboard Packaging [Volume 7, Issue 2, 2021, Pages 820-830]
Luongo, Angelo Modeling beam-like planar structures by a one-dimensional continuum: an analytical-numerical method [Volume 7, Special Issue, 2021, Pages 1020-1033]
Luongo, Angelo Nonlinear dynamics and stability of a homogeneous model of tall buildings under resonant action [Volume 7, Special Issue, 2021, Pages 1034-1048]
Luongo, Angelo Flexural-Torsional Galloping of Prismatic Structures with Double-Symmetric Cross-Section [Volume 7, Special Issue, 2021, Pages 1049-1069]
Luongo, Angelo Editorial [Volume 7, Special Issue, 2021]
Lyashuk, Oleg The Dynamics of the Working Body of the Tubular Conveyor with ‎the Chain Drive [Volume 7, Issue 3, 2021, Pages 1710-1718]

M

Ma, Zhibo Verification and Validation of Common Derivative Terms Approximation in Meshfree Numerical Scheme [Volume 4, Issue 3, 2018, Pages 231-244]
Maani Miandoab, Ehsan Size Effect Impact on the Mechanical Behavior of an Electrically Actuated Polysilicon Nanobeam based NEMS Resonator [Volume 3, Issue 2, 2017, Pages 135-143]
Macêdo, Emanuel Negrão Analysis of Particulate Systems with Numerical Inverse Laplace Transform [Volume 9, Issue 4, 2023, Pages 926-934]
Macêdo, Emanuel N. Hybrid Solution for the Analysis of MHD Micropolar Fluid Flow in a Vertical Porous Parallel-Plates Duct [Volume 6, Special Issue, 2020, Pages 1107-1124]
Macêdo, Emanuel N. Parameter Estimation in Population Balance through Bayesian ‎Technique Markov Chain Monte Carlo [Volume 7, Issue 2, 2021, Pages 890-901]
Machado, Bianca Neves WaveMIMO Methodology: Numerical Wave Generation of a ‎Realistic Sea State‎ [Volume 7, Issue 4, 2021, Pages 2129-2148]
Madhavi, Santhosh Polymeric Dissipative Convection Flow from an Inclined Plane with Chemical Reaction: Numerical Study [Volume 8, Issue 2, 2022, Pages 416-428]
Madoliat, Reza A Note on Free Vibration of a Double-beam System with Nonlinear Elastic Inner Layer [Volume 5, Issue 1, 2019, Pages 174-180]
Magodora, Mangwiro Effect of Cattaneo-Christov Heat Flux on Radiative ‎Hydromagnetic Nanofluid Flow between Parallel Plates using ‎Spectral Quasilinearization Method [Volume 8, Issue 3, 2022, Pages 865-875]
Mahabaleshwar, Ulavathi S. The Impact of Marangoni Convection and Radiation on Flow of ‎Ternary Nanofluid in a Porous Medium with Mass Transpiration [Volume 9, Issue 2, 2023, Pages 487-497]
Mahdavi, Mohammad Hadi Prediction of Entrance Length for Magnetohydrodynamics Channels Flow using Numerical simulation and Artificial Neural Network [Volume 6, Issue 3, 2020, Pages 582-592]
Mahdavian, Mohammad Electrochemical and Mechanical Properties of Ni/g-C3N4 ‎Nanocomposite Coatings with Enhanced Corrosion Protective ‎Properties: A Case Study for Modeling the Corrosion Resistance ‎by ANN and ANFIS Models [Volume 9, Issue 3, 2023, Pages 590-606]
Mahdi, Miralam Investigation the effects of injection pressure and compressibility and nozzle entry in diesel injector nozzle’s flow [Volume 1, Issue 2, 2015, Pages 83-94]
Mahdi, Miralam Numerical Investigation of the Effect of Bubble-Bubble Interaction on the Power of Propagated Pressure Waves [Volume 5, Issue 2, 2019, Pages 181-191]
Maheedhara Reddy, G. Experimental Investigation on Radial Ball Bearing Parameters Using Taguchi Method [Volume 4, Issue 1, 2018, Pages 69-74]
Mahmood, Lubna Smart Gas Sensors: Materials, Technologies, Practical ‎Applications, and Use of Machine Learning – A Review [Volume 9, Issue 3, 2023, Pages 775-803]
Mahmoodi, Masoud A Hybrid SVM-RVM Algorithm to Mechanical Properties in the Friction Stir Welding Process [Volume 8, Issue 1, 2022, Pages 36-47]
Mahmoud, Tarek A. Behavior of Nanofluid with Variable Brownian and Thermal ‎Diffusion Coefficients Adjacent to a Moving Vertical Plate [Volume 7, Issue 3, 2021, Pages 1466-1479]
Mahmoudi, Aicha A New Quantum-computing-based Algorithm for Robotic Arms ‎and Rigid Bodies’ Orientation [Volume 7, Issue 3, 2021, Pages 1836-1846]
Mahmoudi, Jafar CFD Analyses and Comparison of the Effect of Industrial Heat ‎Sinks in Subsea Control System (SCS)‎ [Volume 9, Issue 1, 2023, Pages 95-112]
Mahmoudi, Yousra A New Quantum-computing-based Algorithm for Robotic Arms ‎and Rigid Bodies’ Orientation [Volume 7, Issue 3, 2021, Pages 1836-1846]
Mahpeykar, Mohammad Reza Performance Investigation of Simple Low-dissipation AUSM ‎‎(SLAU) Scheme in Modeling of 2-D Inviscid Flow in Steam ‎Turbine Cascade Blades [Volume 9, Issue 2, 2023, Pages 332-345]
Mahsud, Yasir Electro-magneto-hydrodynamics Flows of Burgers' Fluids in Cylindrical Domains with Time Exponential Memory [Volume 5, Issue 4, 2019, Pages 577-591]
Majeed Jasim‎, Abeer New Analytical Study for Nanofluid between Two Non-Parallel ‎Plane Walls (Jeffery-Hamel Flow)‎ [Volume 7, Issue 1, 2021, Pages 213-224]
Majid, Dayang L. Impacts of Volume of Carbon Nanotubes on Bending for Carbon-‎Kevlar Hybrid Fabrics [Volume 7, Issue 2, 2021, Pages 839-848]
Makinde, O D Effect of Exponentially Variable Viscosity and Permeability on Blasius Flow of Carreau Nano Fluid over an Electromagnetic Plate through a Porous Medium [Volume 5, Issue 2, 2019, Pages 390-401]
Makinde, O.D. Irreversibility Analysis of MHD Buoyancy-Driven Variable Viscosity Liquid Film along an Inclined Heated Plate Convective Cooling [Volume 5, Issue 5, 2019, Pages 840-848]
Makinde, O.D. A Note on the Hydromagnetic Blasius Flow with Variable Thermal Conductivity [Volume 7, Issue 4, 2021, Pages 1925-1930]
Makinde, Oluwole Daniel Study of MHD Second Grade Flow through a Porous Microchannel under the Dual-Phase-Lag Heat and Mass Transfer Model [Volume 5, Issue 4, 2019, Pages 763-778]
Makinde, Oluwole Daniel Effect of Chemical Reaction on Bioconvective Flow in Oxytactic Microorganisms Suspended Porous Cavity [Volume 6, Issue 3, 2020, Pages 653-664]
Makinde, Oluwole Daniel Entropy Analysis of a Radiating Magnetic Liquid Film along a Slippery Inclined Heated Surface with Convective Cooling [Volume 6, Special Issue, 2020, Pages 1141-1150]
Malek-Mohammadi, Hosein Buckling and Vibration Analysis of a Double-layer Graphene ‎Sheet Coupled with a Piezoelectric Nanoplate [Volume 8, Issue 1, 2022, Pages 129-143]
Malekzadeh, Mohammad Improvement of Numerical Manifold Method using Nine-node ‎Quadrilateral and Ten-node Triangular Elements along with ‎Complex Fourier RBFs in Modeling Free and Forced Vibrations [Volume 7, Issue 4, 2021, Pages 2049-2063]
Malekzadeh Fard, K. Low Velocity Impact Response of Laminated Composite Truncated Sandwich Conical Shells with Various Boundary Conditions Using Complete Model and GDQ Method [Volume 3, Issue 1, 2017, Pages 1-15]
Malekzadeh Fard, Keramat Buckling and Postbuckling of Concentrically Stiffened Piezo-Composite Plates on Elastic Foundations [Volume 5, Issue 1, 2019, Pages 128-140]
Malekzadeh Fard, Keramat Buckling and Free Vibration Analysis of Fiber Metal-laminated Plates Resting on Partial Elastic Foundation [Volume 6, Issue 1, 2020, Pages 37-51]
Malekzadeh Fard, Keramat Optimization of the Prismatic Core Sandwich Panel under Buckling Load and Yield Stress Constraints using an Improved Constrained Differential Evolution Algorithm [Volume 6, Issue 4, 2020, Pages 920-933]
Malekzadeh Fard, Keramat Buckling and Vibration Analysis of a Double-layer Graphene ‎Sheet Coupled with a Piezoelectric Nanoplate [Volume 8, Issue 1, 2022, Pages 129-143]
Malikan, M. Thermal Buckling Analysis of Circular Bilayer Graphene Sheets Resting on an Elastic Matrix Based on Nonlocal Continuum Mechanics [Volume 7, Issue 4, 2021, Pages 1862-1877]
Malikan, Mohammad Analytical predictions for the buckling of a nanoplate subjected to non-uniform compression based on the four-variable plate theory [Volume 3, Issue 3, 2017, Pages 218-228]
Malikan, Mohammad Buckling Analysis of a Micro Composite Plate with Nano Coating Based on the Modified Couple Stress Theory [Volume 4, Issue 1, 2018, Pages 1-15]
Malikan, Mohammad Differential Quadrature Method for Dynamic Buckling of Graphene Sheet Coupled by a Viscoelastic Medium Using Neperian Frequency Based on Nonlocal Elasticity Theory [Volume 4, Issue 3, 2018, Pages 147-160]
Malikan, Mohammad On the Buckling Response of Axially Pressurized Nanotubes Based on a Novel Nonlocal Beam Theory [Volume 5, Issue 1, 2019, Pages 103-112]
Malikan, Mohammad A Novel Approach to Fully Nonlinear Mathematical Modeling of ‎Tectonic Plates [Volume 9, Issue 2, 2023, Pages 430-444]
Mallik, Arnab Kumar A Study of Model Separation Flow Behavior at High Angles of Attack Aerodynamics [Volume 4, Issue 4, 2018, Pages 318-330]
Malookani, Rajab A. Asymptotic Approximations of the Solution for a Traveling String under Boundary Damping [Volume 5, Issue 5, 2019, Pages 918-925]
Mamedova, Yegana Vahid Solution of the Problem of Analytical Construction of Optimal ‎Regulators for a Fractional Order Oscillatory System in the ‎General Case [Volume 7, Issue 2, 2021, Pages 970-976]
Manconi, Elisabetta Wave Motion and Stop-Bands in Pipes with Helical Characteristics Using Wave Finite Element Analysis [Volume 4, Special Issue: Applied and Computational Issues in Structural Engineering, 2018, Pages 420-428]
Mandal, B. Dufour and Soret Effects on Unsteady Heat and Mass Transfer for Powell-Eyring Fluid Flow over an Expanding Permeable Sheet [Volume 6, Issue 4, 2020, Pages 985-998]
Mandi, Anand Love Wave Propagation in a Fiber-reinforced Layer with Corrugated Boundaries Overlying Heterogeneous Half-space [Volume 5, Issue 5, 2019, Pages 926-934]
Manjunatha, G. Effects of Inclined Magnetic Field and Porous Medium on Peristaltic Flow of a Bingham Fluid with Heat Transfer [Volume 7, Issue 4, 2021, Pages 1892-1906]
Manjunatha, S. Theoretical Study of Convective Heat Transfer in Ternary ‎Nanofluid Flowing past a Stretching Sheet [Volume 8, Issue 4, 2022, Pages 1279-1286]
Manrique-Escobar, Camilo Andrés On the Analytical and Computational Methodologies for Modelling Two-wheeled Vehicles within the Multibody Dynamics Framework: A Systematic Literature Review [Volume 8, Issue 1, 2022, Pages 153-181]
Mantari, J.L. On Bending Response of Doubly Curved Laminated Composite Shells Using Hybrid Refined Models [Volume 5, Issue 5, 2019, Pages 875-899]
MANTARI, J.L. Evaluation of the Best New Cross-ply Laminated Plate Theories through the Axiomatic/Asymptotic Approach [Volume 4, Issue 4, 2018, Pages 331-351]
MANTARI, J.L. Generalized 2-Unknown’s HSDT to Study Isotropic and Orthotropic Composite Plates [Volume 5, Issue 1, 2019, Pages 141-149]
MANTARI, J.L. Bending and Free Vibration Analysis of Functionally Graded Plates via Optimized Non-polynomial Higher Order Theories [Volume 5, Issue 2, 2019, Pages 281-298]
Manthena, V. R. Springbackward Phenomenon of a Transversely Isotropic Functionally Graded Composite Cylindrical Shell [Volume 2, Issue 3, 2016, Pages 134-143]
Maraki, Mohammad Reza A Hybrid SVM-RVM Algorithm to Mechanical Properties in the Friction Stir Welding Process [Volume 8, Issue 1, 2022, Pages 36-47]
Maranna, Thippaiah The Impact of Marangoni Convection and Radiation on Flow of ‎Ternary Nanofluid in a Porous Medium with Mass Transpiration [Volume 9, Issue 2, 2023, Pages 487-497]
Marashi, Seyed Maziar Estimating the Mode Shapes of a Bridge Using Short Time Transmissibility Measurement from a Passing Vehicle [Volume 5, Issue 4, 2019, Pages 735-748]
Marinkovic, Dragan Editorial [Volume 6, Special Issue, 2020]
Marinkovic, Dragan Stress Mode Superposition for a Priori Detection of Highly ‎Stressed Areas: Mode Normalisation and Loading Influence [Volume 7, Issue 3, 2021, Pages 1698-1709]
Marinkovic, Dragan Selection of Optimal Planetary Transmission for Light Electric Vehicle Main Gearbox [(Articles in Press)]
Marković, Kristina Selection of Optimal Planetary Transmission for Light Electric Vehicle Main Gearbox [(Articles in Press)]
Marotti de Sciarra, Francesco Linear dynamic response of nanobeams accounting for higher gradient effects [Volume 2, Issue 2, 2016, Pages 54-64]
Marotti de Sciarra, Francesco Axial and Torsional Free Vibrations of Elastic Nano-Beams by Stress-Driven Two-Phase Elasticity [Volume 5, Issue 2, 2019, Pages 402-413]
Marques, Eduardo Effect of Temperature and Moisture on the Impact Behaviour of ‎Adhesive Joints for the Automotive Industry [Volume 7, Issue 3, 2021, Pages 1488-1500]
Marques, Eduardo A.S. Mechanical Characterisation and Comparison of Hyperelastic ‎Adhesives: Modelling and Experimental Validation [Volume 8, Issue 1, 2022, Pages 359-369]
Mashayekhi, Mohammad Investigating the Ultrasonic Assistance in the Tube Hydroforming Process [Volume 3, Issue 3, 2017, Pages 178-184]
Mashayekhi, Mohammad Investigation on the Ultrasonic Tube Hydroforming in the Bulging Process Using Finite Element Method [Volume 3, Issue 4, 2017, Pages 251-257]
Mashinchi Joubari, Mohammad Mehdi Determination of Periodic Solution for Tapered Beams with Modified Iteration Perturbation Method [Volume 1, Issue 1, 2015, Pages 44-51]
Mashinchi Joubari, Mohammad Mehdi Solution of strongly nonlinear oscillator problem arising in Plasma Physics with Newton Harmonic Balance Method [Volume 1, Issue 2, 2015, Pages 59-66]
Masri, Sami F. On the Active Vibration Control of Nonlinear Uncertain Structures [Volume 7, Special Issue, 2021, Pages 1183-1197]
Massouh, Fawaz Numerical Investigation of an Unsteady and Anisotropic Turbulent ‎Flow Downstream a 90° Bend Pipe with and without Ribs [Volume 7, Issue 3, 2021, Pages 1620-1638]
Mastrone, Marco Nicola Numerical Modeling of Fluid’s Aeration: Analysis of the Power ‎Losses and Lubricant Distribution in Gearboxes [Volume 9, Issue 1, 2023, Pages 83-94]
Matoog, Rajaa. T The Rank Upgrading Technique for a Harmonic Restoring Force ‎of Nonlinear Oscillators [Volume 7, Issue 2, 2021, Pages 782-789]
Matouk, Ahmed Ezzat A Novel Fractional-Order System: Chaos, Hyperchaos and ‎Applications to Linear Control [Volume 7, Issue 2, 2021, Pages 701-714]
Mauludin, Luthfi Muhammad Cyclic and Monotonic Behavior of Strengthened and Unstrengthened Square Reinforced Concrete Columns [Volume 5, Special Issue: Computational Methods for Material Failure, 2019, Pages 517-525]
Mauludin, Luthfi Muhammad Modeling of Self-Healing Concrete: A Review [Volume 5, Special Issue: Computational Methods for Material Failure, 2019, Pages 526-539]
Mazlan, Norkhairunnisa Impacts of Volume of Carbon Nanotubes on Bending for Carbon-‎Kevlar Hybrid Fabrics [Volume 7, Issue 2, 2021, Pages 839-848]
Mba, David Study of the Vibration Characteristics of SA 330 Helicopter Planetary Main Gearbox [Volume 9, Issue 4, 2023, Pages 1093-1106]
Mechighel, Farid Thermal Behavior of Mesoporous Aramid Fiber Reinforced Silica Aerogel Composite for Thermal Insulation Applications: Microscale Modeling [Volume 10, Issue 1, 2024, Pages 140-151]
Medina, David A. A Nonlinear Lagrangian Model for Plane Frames Pre-design [Volume 9, Issue 3, 2023, Pages 884-899]
Meften, Ghazi A. Poiseuille Flow with Couple Stresses Effect and No-slip Boundary Conditions [Volume 6, Special Issue, 2020, Pages 1069-1083]
Megahid, S.F. A New Solution for the Classical Problem of a Rigid Body Motion ‎in a Liquid [Volume 7, Issue 4, 2021, Pages 2179-2184]
Mehdipour, Shahpoor Finite Element Analysis for CFST Columns under Blast Loading [Volume 3, Issue 4, 2017, Pages 283-292]
Mehdizadeh Khalsaraei, Mohammad Dynamically Consistent NSFD Methods for Predator-prey System [Volume 7, Issue 3, 2021, Pages 1565-1574]
Mehdizadeh Khalsaraei, Mohammad Nonstandard Dynamically Consistent Numerical Methods for ‎MSEIR Model [Volume 8, Issue 1, 2022, Pages 196-205]
Mehmood, Asrhad VIV Control Strategies Using Displacement-Based ‎Phenomenological Model [Volume 7, Special Issue, 2021, Pages 1090-1097]
Mehtiyev, Rafail Theory and Experiment in Predicting the Strength of Hybrid ‎Fiber Metal Laminates [Volume 9, Issue 4, 2023, Pages 987-999]
Mekonnen, Tariku Birabasa Uniformly Convergent Numerical Method for Two-parametric ‎Singularly Perturbed Parabolic Convection-diffusion Problems [Volume 7, Issue 2, 2021, Pages 535-545]
Melnikov, Andrey Stability Analysis of an Inflated, Axially Extended, Residually Stressed Circular Cylindrical Tube [Volume 9, Issue 3, 2023, Pages 834-847]
Meng, Guangwei Fatigue Life Analysis of Bus Body based on User Target Load Spectrum‎ [Volume 7, Issue 2, 2021, Pages 965-969]
Menni, Younes Analysis of Fluid Dynamics and Heat Transfer in a Rectangular Duct with Staggered Baffles [Volume 5, Issue 2, 2019, Pages 231-248]
Menni, Younes The Solar Air Channels: Comparative Analysis, Introduction of Arc-shaped Fins to Improve the Thermal Transfer [Volume 5, Issue 4, 2019, Pages 616-626]
Menni, Younes Fluid Flow and Heat Transfer over Staggered ꞌ+ꞌ Shaped Obstacles [Volume 6, Issue 4, 2020, Pages 741-756]
Menni, Younes Heating Capacity of an Earth to Air Heat Exchanger in Arid Regions - Experimental Investigation [Volume 8, Issue 2, 2022, Pages 429-437]
Menni, Younes Thermal-Aerodynamic Performance Measurement of Air Heat ‎Transfer Fluid Mechanics over S-shaped Fins in Shell-and-tube ‎Heat Exchangers [Volume 7, Issue 4, 2021, Pages 1931-1943]
Menni, Younes Hydrodynamic Behavior in Solar Oil Heat Exchanger Ducts Fitted ‎with Staggered Baffles and Fins [Volume 8, Issue 3, 2022, Pages 774-790]
MENNI, Younes A Review of Solar Energy Collectors: Models and Applications [Volume 4, Issue 4, 2018, Pages 375-401]
Mercan, Kadir Free Vibration of Annular Plates by Discrete Singular Convolution and Differential Quadrature Methods [Volume 2, Issue 3, 2016, Pages 128-133]
Mercan, Kadir Bending Response of Nanobeams Resting on Elastic Foundation [Volume 4, Issue 2, 2018, Pages 105-114]
Mercantini, Matteo Stability Analysis of Articulated Bus in Straight-ahead Running Manoeuvre [Volume 7, Issue 3, 2021, Pages 1649-1662]
MERDJI, Ali Biomechanical Evaluation of Bone Quality Effect on Stresses at Bone-Implant Interface: A Finite Element Study [Volume 7, Issue 3, 2021, Pages 1266-1275]
Merodio, J. Finite Deformations of Fibre-reinforced Elastic Solids with ‎Fibre Bending Stiffness: A Spectral Approach [Volume 8, Issue 4, 2022, Pages 1332-1342]
Merodio, Jose Stability Analysis of an Inflated, Axially Extended, Residually Stressed Circular Cylindrical Tube [Volume 9, Issue 3, 2023, Pages 834-847]
Merodio, José Bifurcation of Fiber-Reinforced Cylindrical Membranes under ‎Extension, Inflation, and Swelling [Volume 9, Issue 1, 2023, Pages 113-128]
Meshkatifar, Javad Optimal Roll Center Height of Front McPherson Suspension System for a Conceptual Class A Vehicle [Volume 1, Issue 1, 2015, Pages 10-16]
Meyer, Yann Performance measure and tool for benchmarking metaheuristic optimization algorithms [Volume 7, Issue 3, 2021, Pages 1803-1813]
Micaelo, Rui Numerical Analysis on the Bond Performance of Different ‎Anchored Joints under Monotonic and Cyclic Pull-push Loading [Volume 8, Issue 1, 2022, Pages 388-404]
Mieczkowski, Grzegorz Theoretical Analysis of the Motorcycle Front Brake Heating ‎Process during High Initial Speed Emergency Braking [Volume 6, Special Issue, 2020, Pages 1431-1437]
Mikhasev, Gennadi Pull-in Instability Analysis of a Nanocantilever Based on the ‎Two-Phase Nonlocal Theory of Elasticity [Volume 8, Issue 4, 2022, Pages 1456-1466]
Mikhnych, Vladyslav Thermal Behavior of Monocrystalline Silicon Solar Cells: A ‎Numerical and Experimental Investigation on the Module ‎Encapsulation Materials [Volume 7, Issue 3, 2021, Pages 1847-1855]
Mikułowski, Grzegorz On/off Nodal Reconfiguration for Global Structural Control of ‎Smart 2D Frames [Volume 7, Special Issue, 2021, Pages 1121-1129]
Milanezi de Andrade, Rafhael Four Legged Guará Robot: From Inspiration to Implementation [Volume 7, Issue 3, 2021, Pages 1425-1434]
Milani, Massimo Prediction Capabilities of a One-dimensional Wall-flow ‎Particulate Filter Model [Volume 8, Issue 1, 2022, Pages 245-259]
Minakov, Andrey V. Flow Regimes Characteristics of Water-crude Oil in a Rectangular ‎Y-microchannel [Volume 8, Issue 2, 2022, Pages 655-670]
Minakov, A.V. Numerical Investigation of Enhanced Oil Recovery from various ‎Rocks by Nanosuspensions Flooding [Volume 8, Issue 1, 2022, Pages 306-318]
Minakov, A.V. Verification and Validation of a Network Algorithm for Single-phase Flow Modeling using Microfluidic Experiments [Volume 9, Issue 4, 2023, Pages 1156-1167]
Mirabdolah Lavasani, Arash Numerical and Analytical Approach for Film Condensation on Different Forms of Surfaces [Volume 5, Issue 5, 2019, Pages 964-975]
Miroshnichenko, Igor V. Influence of Thermal Radiation on Heat Transfer through a ‎Hollow Block [Volume 9, Issue 2, 2023, Pages 419-429]
Miroshnichenko, Igor V. Effect of Thermal Conductivity and Emissivity of Solid Walls on Time-Dependent Turbulent Conjugate Convective-Radiative Heat Transfer [Volume 5, Issue 2, 2019, Pages 207-216]
Mirzabeigy, Alborz A Note on Free Vibration of a Double-beam System with Nonlinear Elastic Inner Layer [Volume 5, Issue 1, 2019, Pages 174-180]
Mirzabeigy, Alborz A Simple Approach for Dealing with Autonomous Conservative ‎Oscillator under Initial Velocity [Volume 8, Issue 3, 2022, Pages 918-924]
Mirzavand, Babak Torsional Aeroelasticity of a Flexible VAWT Blade using a Combined Aerodynamic Method by Considering Post-stall and Local Reynolds Regime [Volume 6, Issue 4, 2020, Pages 757-776]
Mishra, Kundan Numerical Analysis of an Edge Crack Isotropic Plate with Void/Inclusions under Different Loading by Implementing XFEM [Volume 7, Issue 3, 2021, Pages 1362-1382]
Mishra, Shweta Entropy Generation of Variable Viscosity and Thermal Radiation on Magneto Nanofluid Flow with Dusty Fluid [Volume 6, Issue 1, 2020, Pages 171-182]
Mishra, Shweta Impact of Microbial Activity and Stratification Phenomena on Generating/Absorbing Sutterby Nanofluid over a Darcy Porous Medium [Volume 9, Issue 3, 2023, Pages 804-819]
Mishra, S.R. Metal and Metallic Oxide Nanofluid over a Shrinking Surface with ‎Thermal Radiation and Heat Generation/Absorption [Volume 8, Issue 2, 2022, Pages 557-565]
Mishra, S.R. ADM Solution for Cu/CuO –Water Viscoplastic Nanofluid ‎Transient Slip Flow from a Porous Stretching Sheet with Entropy ‎Generation, Convective Wall Temperature and Radiative Effects [Volume 7, Issue 3, 2021, Pages 1291-1305]
Mishra, S.R. Free Convection of Micropolar Fluid over an Infinite Inclined ‎Moving Porous Plate [Volume 8, Issue 4, 2022, Pages 1154-1162]
Mishurenko, Nikolai Influence of Discretely Introduced Cutouts on the Buckling of Shallow Shells with Double Curvature [Volume 10, Issue 1, 2024, Pages 55-63]
Misirli, Emine Conformable Double Sumudu Transform with Applications [Volume 7, Issue 2, 2021, Pages 578-586]
Misnik, Vyacheslav Pull-in Instability Analysis of a Nanocantilever Based on the ‎Two-Phase Nonlocal Theory of Elasticity [Volume 8, Issue 4, 2022, Pages 1456-1466]
Misra, Ashok Effects of Non-uniform Suction, Heat Generation/Absorption and Chemical Reaction with Activation Energy on MHD Falkner-Skan Flow of Tangent Hyperbolic Nanofluid over a Stretching/Shrinking Eedge [Volume 6, Issue 3, 2020, Pages 640-652]
Mitrev, Rosen A Case Study of Combined Application of Smart Materials in a ‎Thermal Energy Harvester with Vibrating Action [Volume 7, Issue 1, 2021, Pages 372-381]
Mitroi-Symeonidis, Flavia-Corina The Permutation Entropy and its Applications on Fire Tests Data [Volume 6, Special Issue, 2020, Pages 1380-1393]
Miyagawa, Helder Kiyoshi Analysis of Particulate Systems with Numerical Inverse Laplace Transform [Volume 9, Issue 4, 2023, Pages 926-934]
Miyagawa, Helder K. Hybrid Solution for the Analysis of MHD Micropolar Fluid Flow in a Vertical Porous Parallel-Plates Duct [Volume 6, Special Issue, 2020, Pages 1107-1124]
Mkaoir, Mohamed Lamb Wave Analysis in Anisotropic Multilayer ‎Piezoelectric-piezomagnetic Material [Volume 8, Issue 2, 2022, Pages 629-640]
Moatimid, Galal M. Stability Analysis of a Damped Nonlinear Wave Equation [Volume 6, Special Issue, 2020, Pages 1394-1403]
Moatimid, Galal M. Approximate Solutions of Coupled Nonlinear Oscillations: ‎Stability Analysis [Volume 7, Issue 2, 2021, Pages 382-395]
Moayyedi, Mohammad Kazem Extension Ability of Reduced Order Model of Unsteady Incompressible Flows Using a Combination of POD and Fourier Modes [Volume 5, Issue 1, 2019, Pages 1-12]
Mobki, Hamed Pull-in Phenomenon in the Electrostatically Micro-switch ‎Suspended between Two Conductive Plates using the Artificial ‎Neural Network [Volume 8, Issue 4, 2022, Pages 1222-1235]
Moghimi, Mahdi Twin Screw Expanders Profile Optimization Using Surrogate-‎Based Modelling [Volume 8, Issue 4, 2022, Pages 1141-1153]
Mohagheghi, Mostafa Helicopter Blade Stability Analysis Using Aeroelastic Frequency Response Functions [Volume 1, Issue 3, 2015, Pages 152-160]
Mohamad, A. M. Effect of Throughflow on the Convective Instabilities in an ‎Anisotropic Porous Medium Layer with Inconstant Gravity [Volume 7, Issue 4, 2021, Pages 1964-1972]
Mohamad, Ahmad Qushairi Mathematical Modelling of MHD Blood Flow with Gold Nanoparticles in Slip Small Arteries [Volume 10, Issue 1, 2024, Pages 125-139]
Mohamed, Kezzar Heat Transfer in Hydro-Magnetic Nano-Fluid Flow between Non-Parallel Plates Using DTM [Volume 4, Issue 4, 2018, Pages 352-364]
Mohamed, Salwa M. Static Buckling of 2D FG Porous Plates Resting on Elastic ‎Foundation based on Unified Shear Theories‎ [Volume 9, Issue 1, 2023, Pages 239-258]
Mohamed Rafik, Sari Heat Transfer in Hydro-Magnetic Nano-Fluid Flow between Non-Parallel Plates Using DTM [Volume 4, Issue 4, 2018, Pages 352-364]
Mohammadi, Ali Reza Optimizing Hydro Power Turbines in Order to Secure the Passage of Fishes in Khuzestan province [Volume 1, Issue 2, 2015, Pages 95-102]
Mohammadi, Ardeshir Karami Effect of thermoelastic damping in nonlinear beam model of MEMS resonators by differential quadrature method [Volume 1, Issue 3, 2015, Pages 112-121]
Mohammadi, Bijan Uniaxial Buckling Analysis Comparison of Nanoplate and Nanocomposite Plate with Central Square Cut out Using Domain Decomposition Method [Volume 2, Issue 4, 2016, Pages 230-242]
Mohammadi, Mohammad Reza Optimizing Hydro Power Turbines in Order to Secure the Passage of Fishes in Khuzestan province [Volume 1, Issue 2, 2015, Pages 95-102]
Mohammadi, Moona Optimizing Hydro Power Turbines in Order to Secure the Passage of Fishes in Khuzestan province [Volume 1, Issue 2, 2015, Pages 95-102]
Mohammadi, Younes Vibration Analysis of Different Types of Porous FG Conical Sandwich Shells in Various Thermal Surroundings [Volume 6, Issue 3, 2020, Pages 416-432]
Mohammadifar, Hasan Investigation of Nanoﬂuid Natural Convection Heat Transfer in ‎Open Ended L-shaped Cavities utilizing LBM [Volume 7, Issue 4, 2021, Pages 2064-2083]
Mohammad Khanlo, Heshmatallah Distributed-parameter Dynamic Modeling and Bifurcation Analysis of a Trapezoidal Piezomagnetoelastic Energy Harvester [Volume 8, Issue 1, 2022, Pages 97-113]
Mohammed, Marwan Qaid Robust P-H∞ Integrated Controller for Flexible Link Manipulator ‎System in the Presence of Disturbance [Volume 7, Issue 2, 2021, Pages 646-654]
Mohapatra, J. A Parameter Uniform Numerical Scheme for Singularly Perturbed Differential-difference Equations with Mixed Shifts [Volume 6, Issue 2, 2020, Pages 344-356]
Mohd Kasim, Abdul Rahman Insight into Stability Analysis on Modified Magnetic Field of ‎Radiative Non-Newtonian Reiner–Philippoff Fluid Model‎ [Volume 8, Issue 2, 2022, Pages 745-753]
Mohebbi, Akbar Implicit RBF Meshless Method for the Solution of Two-dimensional Variable Order Fractional Cable Equation [Volume 6, Issue 2, 2020, Pages 235-247]
Mohi, S. Abdul On the Six Node Hexagon Elements for Continuum Topology Optimization of Plates Carrying in Plane Loading and Shell Structures Carrying out of Plane Loading [Volume 6, Issue 3, 2020, Pages 617-639]
Mohsen, A.M. Two-Dimensional Numerical Study of the Transient Flow ‎Conditions in Complete Shock Tunnel‎ [Volume 7, Issue 2, 2021, Pages 956-964]
Mohsnain, Syed Mohammad New Exact Traveling Wave Solutions for Fractional Order System ‎Describing the Second Grade Fluid through Medium with Heat ‎Transfer‎ [Volume 7, Issue 2, 2021, Pages 764-781]
Mohyud-Din, Syed Tauseef Jeffery Hamel Flow of a non-Newtonian Fluid [Volume 2, Issue 1, 2016, Pages 21-28]
Mokhtari, Javad Effect of Variable Thermal Expansion Coefficient and Nanofluid Properties on Steady Natural Convection in an Enclosure [Volume 3, Issue 4, 2017, Pages 240-250]
Mokhtari, Javad VOC level control by ventilation improvement of Flexography printing room using CFD modeling [Volume 3, Issue 3, 2017, Pages 171-177]
Molaei, Ahad Torsional Aeroelasticity of a Flexible VAWT Blade using a Combined Aerodynamic Method by Considering Post-stall and Local Reynolds Regime [Volume 6, Issue 4, 2020, Pages 757-776]
Molayi, Maryam Dynamically Consistent NSFD Methods for Predator-prey System [Volume 7, Issue 3, 2021, Pages 1565-1574]
Molayi, Maryam Nonstandard Dynamically Consistent Numerical Methods for ‎MSEIR Model [Volume 8, Issue 1, 2022, Pages 196-205]
Mollayi, Nader Modeling of Weld Bead Geometry Using Adaptive Neuro-Fuzzy Inference System (ANFIS) in Additive Manufacturing [Volume 6, Issue 1, 2020, Pages 160-170]
Momen, Mahyar A New Approach for Exergoeconomics Evaluation by Considering ‎Uncertainty with Monte Carlo Method [Volume 9, Issue 1, 2023, Pages 15-24]
Momeni, Fereshte Analytical Solutions and Analyses of the Displacement ‎Separating Point in Diffusers [Volume 8, Issue 3, 2022, Pages 891-903]
Mondal, Hiranmoy Entropy Generation of Variable Viscosity and Thermal Radiation on Magneto Nanofluid Flow with Dusty Fluid [Volume 6, Issue 1, 2020, Pages 171-182]
Mondal, Hiranmoy Spectral Quasi-linearization for MHD Nanofluid Stagnation Boundary Layer Flow due to a Stretching/Shrinking Surface [Volume 6, Issue 4, 2020, Pages 1058-1068]
Mondal, Hiranmoy Effect of Cattaneo-Christov Heat Flux on Radiative ‎Hydromagnetic Nanofluid Flow between Parallel Plates using ‎Spectral Quasilinearization Method [Volume 8, Issue 3, 2022, Pages 865-875]
Mondal, Hiranmoy Impact of Microbial Activity and Stratification Phenomena on Generating/Absorbing Sutterby Nanofluid over a Darcy Porous Medium [Volume 9, Issue 3, 2023, Pages 804-819]
Mondal, Rabindra Nath Numerical Investigation on Flow Transition through a Curved ‎Square Duct with Negative Rotation [Volume 7, Issue 3, 2021, Pages 1435-1447]
Monge, J.C. On Bending Response of Doubly Curved Laminated Composite Shells Using Hybrid Refined Models [Volume 5, Issue 5, 2019, Pages 875-899]
Moniri Bidgoli, Ali Mohammad Analytical bending solution of fully clamped orthotropic rectangular plates resting on elastic foundations by the finite integral transform method [Volume 1, Issue 2, 2015, Pages 52-58]
Montorsi, Luca Prediction Capabilities of a One-dimensional Wall-flow ‎Particulate Filter Model [Volume 8, Issue 1, 2022, Pages 245-259]
Morabito, Francescogiuseppe Linear dynamic response of nanobeams accounting for higher gradient effects [Volume 2, Issue 2, 2016, Pages 54-64]
Morachkovska, Iryna Analysis of Free Vibration of Porous Power-law and Sigmoid Functionally Graded Sandwich Plates by the R-functions Method [Volume 9, Issue 4, 2023, Pages 1144-1155]
Morales Rojas, Andrés David Fluid-dynamic Simulations for Assessment of Dimensioning ‎Methodologies of Pelton Turbine Buckets Considering the Initial ‎Torque Overcoming [Volume 9, Issue 4, 2023, Pages 1036-1048]
Morandini, Marco Parametric Optimization of a Cyclogiro Aircraft Design for Efficient Hover with Aeroelastic Considerations [Volume 7, Issue 3, 2021, Pages 1774-1787]
Moraveji Tabasi, Horae Buckling and Free Vibration Analysis of Fiber Metal-laminated Plates Resting on Partial Elastic Foundation [Volume 6, Issue 1, 2020, Pages 37-51]
Moreira, Rafael San Martin Numerical Study and Geometric Investigation of Corrugated ‎Channels Subjected to Forced Convective Flows [Volume 7, Issue 2, 2021, Pages 727-738]
Morelli, Laura Vibration Mitigation of Rail Noise Barriers by Hysteretic Absorbers [Volume 7, Special Issue, 2021, Pages 1205-1217]
Mosalmani, Reza Size Effect on the Axisymmetric Vibrational Response of ‎Functionally Graded Circular Nano-Plate Based on the Nonlocal Stress-Driven Method [Volume 8, Issue 3, 2022, Pages 962-980]
Mosalmani, Reza Stress-driven Approach to Vibrational Analysis of FGM Annular ‎Nano-plate based on First-order Shear Deformation Plate Theory [Volume 9, Issue 3, 2023, Pages 637-655]
Moshtaghi, Nasrin Numerical Solution of Time Fractional Cable Equation via the Sinc-Bernoulli Collocation Method [Volume 7, Issue 4, 2021, Pages 1916-1924]
Moslemi, Mehdi Temperature Effect on Moving Water Droplets at the Channel of ‎PEMFC by Multi-component Multiphase Lattice Boltzmann Method [Volume 9, Issue 3, 2023, Pages 607-622]
Motififard, Mehdi Nanostructure, Molecular Dynamics Simulation and Mechanical Performance of PCL Membranes Reinforced with Antibacterial Nanoparticles [Volume 7, Issue 4, 2021, Pages 1907-1915]
Motsa, Sandile S. A Paired Quasi-linearization on Magnetohydrodynamic Flow and Heat Transfer of Casson Nanofluid with Hall Effects [Volume 5, Issue 5, 2019, Pages 849-860]
Mölder, Sannu Performance of Two Types of High Speed, High Efficiency ‎Axisymmetric Intakes [Volume 7, Issue 1, 2021, Pages 93-101]
Moura, Carlos H.R. Parameter Estimation in Population Balance through Bayesian ‎Technique Markov Chain Monte Carlo [Volume 7, Issue 2, 2021, Pages 890-901]
Moussavi Torshizi, Seyed Ebrahim Multi-objective Optimization of Shot-peening Parameters using ‎Design of Experiments and Finite Element Simulation: A ‎Statistical Model [Volume 8, Issue 3, 2022, Pages 838-852]
Muhammad, Jan Meshfree Collocation Method for the Numerical Solution of ‎Higher Order KdV Equation [Volume 7, Issue 2, 2021, Pages 422-431]
Muhammad, Jan On Integrability up to the Boundary of the Weak Solutions to a ‎Class of non-Newtonian Compressible Fluids with Vacuum [Volume 7, Issue 3, 2021, Pages 1527-1536]
Muhammad Imran, Syed Diffusion-thermo Effects in Stagnation Point Flow of Second ‎Grade Fluid past a Stretching Plate [Volume 7, Issue 2, 2021, Pages 902-912]
Mukaddes, Abul Mukid Mohammad Numerical Investigation of Tissue-Temperature Controlled ‎System in Thermal Ablation: A Finite Element Approach [Volume 7, Issue 3, 2021, Pages 1826-1835]
Mukanova, Balgaisha Control of Actuators Torques for Optimal Movement along a ‎Given Trajectory for the DexTAR Robot [Volume 7, Issue 1, 2021, Pages 165-176]
Mukanova, Balgaisha Regularization of the Movement of a Material Point Along a Flat ‎Trajectory: Application to Robotics Problems [Volume 7, Issue 3, 2021, Pages 1726-1736]
MUKDADI, Osama Biomechanical Evaluation of Bone Quality Effect on Stresses at Bone-Implant Interface: A Finite Element Study [Volume 7, Issue 3, 2021, Pages 1266-1275]
Mumraiz, Sana Third-grade Fluid Flow of Stretching Cylinder with Heat Source/Sink [Volume 6, Special Issue, 2020, Pages 1125-1132]
Munafo, C.F. Analysis of a Hyperbolic Heat Transfer Model in Blood-perfused ‎Biological Tissues with Laser Heating [Volume 8, Issue 4, 2022, Pages 1398-1406]
Mushahary, P. A Parameter Uniform Numerical Scheme for Singularly Perturbed Differential-difference Equations with Mixed Shifts [Volume 6, Issue 2, 2020, Pages 344-356]
Musiket, Kamtornkiat Accuracy and Convergence Rate Comparative Investigation on ‎Polytope Smoothed and Scaled Boundary Finite Element [Volume 9, Issue 1, 2023, Pages 226-238]
Mustopa, Enjang J. Two-Solid Deposition in Fluid Column using Immersed ‎Boundary-Lattice Boltzmann Method [Volume 7, Issue 3, 2021, Pages 1814-1825]
Muthtamilselvan, M. Unsteady Separated Stagnation Point Flow of Nanofluid past a ‎Moving Flat Surface in the Presence of Buongiorno's Model [Volume 7, Issue 3, 2021, Pages 1283-1290]
Muthu, P. Mathematical Model of Fluid Flow and Solute Transport in ‎Converging-diverging Permeable Tubes [Volume 9, Issue 4, 2023, Pages 900-914]
My, Chu A. Robust P-H∞ Integrated Controller for Flexible Link Manipulator ‎System in the Presence of Disturbance [Volume 7, Issue 2, 2021, Pages 646-654]
Myntiuk, Sofia Spectral Methods Application in Problems of the Thin-walled ‎Structures Deformation [Volume 8, Issue 2, 2022, Pages 641-654]
Myntiuk, Vitalii Spectral Methods Application in Problems of the Thin-walled ‎Structures Deformation [Volume 8, Issue 2, 2022, Pages 641-654]

N

Nabavi, S. Nader Optimization of Ventilation Register Locations for Reducing Suspended Particle Concentration Using the Taguchi Method [(Articles in Press)]
Naderi, Mahmood Experimental and Finite Element Study to Determine the ‎Mechanical Properties and Bond Between Repair Mortars and ‎Concrete Substrates [Volume 8, Issue 2, 2022, Pages 493-509]
Naderi, Reza Local and Global Approaches to Fracture Mechanics Using Isogeometric Analysis Method [Volume 1, Issue 4, 2015, Pages 168-180]
Naeimi, Hooman Optimization of Ventilation Register Locations for Reducing Suspended Particle Concentration Using the Taguchi Method [(Articles in Press)]
Nafeh, Hind A. Automatic Structural Synthesis of Planetary Geared Mechanisms ‎using Graph Theory [Volume 9, Issue 2, 2023, Pages 384-403]
Nagar, Atulya K. Theoretical Study on Poiseuille Flow of Herschel-Bulkley Fluid in ‎Porous Media‎ [Volume 8, Issue 4, 2022, Pages 1246-1269]
Naga Santoshi, P. Numerical Scrutinization of Three Dimensional Casson-Carreau Nano Fluid Flow [Volume 6, Issue 3, 2020, Pages 531-542]
Nagendra, N. Magneto Casson-Carreau Fluid Flow through a Circular Porous ‎Cylinder with Partial Slip‎ [Volume 8, Issue 4, 2022, Pages 1208-1221]
Naikoti, Kishan Effect of Chemical Reaction on Bioconvective Flow in Oxytactic Microorganisms Suspended Porous Cavity [Volume 6, Issue 3, 2020, Pages 653-664]
Nair, Manoj T. Higher-Order Slope Limiters for Euler Equation [Volume 8, Issue 3, 2022, Pages 904-917]
NAIT BOUDA, NOURA 3D Numerical Investigation of Heat Transfer Performance in Liquid-liquid Taylor Flow [Volume 10, Issue 1, 2024, Pages 183-204]
Najafi, Amirali Validation of Model-Based Real-Time Hybrid Simulation for a Lightly-Damped and Highly-Nonlinear Structural System [Volume 7, Special Issue, 2021, Pages 1252-1265]
Nakhchi, Mahdi Erfanian An Experimental and Numerical Study on the Aerodynamic ‎Performance of Vibrating Wind Turbine Blade with Frequency-‎Domain Method [Volume 7, Issue 3, 2021, Pages 1737-1750]
Nakhchi, Mahdi E. Forced Response of a Low-Pressure Turbine Blade using ‎Spectral/hp Element Method: Direct Numerical Simulation‎ [Volume 7, Issue 1, 2021, Pages 135-147]
Nardin, Michel Using the Finite Element Analysis Method to Study the 3-point Bending Test for the Characterization of the Adherence [Volume 6, Issue 3, 2020, Pages 505-516]
Narender, G. MHD Casson Nanofluid Past a Stretching Sheet with the Effects of Viscous Dissipation, Chemical Reaction and Heat Source/Sink [Volume 7, Issue 4, 2021, Pages 2040-2048]
Nasedkin, Andrey Multilevel Modeling of 1-3 Piezoelectric Energy Harvester Based ‎on Porous Piezoceramics [Volume 9, Issue 3, 2023, Pages 763-774]
Nasihatgozar, M. Free Vibration of a Thick Sandwich Plate Using Higher Order Shear Deformation Theory and DQM for Different Boundary Conditions [Volume 3, Issue 1, 2017, Pages 16-24]
Nasir, Ayman Direct Normal Form Analysis of Oscillators with Different ‎Combinations of Geometric Nonlinear Stiffness Terms [Volume 7, Special Issue, 2021, Pages 1167-1182]
Nasr, Mohamed E. Thermoelastic Vibrations of Nonlocal Nanobeams Resting on a ‎Pasternak Foundation via DPL Model [Volume 7, Issue 1, 2021, Pages 34-44]
Nasri, Wiem Thermal Behavior of Mesoporous Aramid Fiber Reinforced Silica Aerogel Composite for Thermal Insulation Applications: Microscale Modeling [Volume 10, Issue 1, 2024, Pages 140-151]
Natarajan, Sundararajan Evaluation of Fracture Parameters by Coupling the Edge-Based Smoothed Finite Element Method and the Scaled Boundary Finite Element Method [Volume 5, Special Issue: Computational Methods for Material Failure, 2019, Pages 540-551]
Naung, Shine Win An Experimental and Numerical Study on the Aerodynamic ‎Performance of Vibrating Wind Turbine Blade with Frequency-‎Domain Method [Volume 7, Issue 3, 2021, Pages 1737-1750]
Nawaz, Rashid Comparative Study of Plane Poiseuille Flow of Non-isothermal ‎Couple ‎Stress Fluid of Reynold Viscosity Model using Optimal ‎Homotopy ‎Asymptotic Method and New Iterative Method [Volume 7, Issue 2, 2021, Pages 404-414]
Nawaz, Sara Third-grade Fluid Flow of Stretching Cylinder with Heat Source/Sink [Volume 6, Special Issue, 2020, Pages 1125-1132]
Nawaz Khan, Muhammad A Radial Basis Function Collocation Method for Space-dependent ‎Inverse Heat Problems [Volume 6, Special Issue, 2020, Pages 1187-1199]
Nayak, M.K. Effect of Exponentially Variable Viscosity and Permeability on Blasius Flow of Carreau Nano Fluid over an Electromagnetic Plate through a Porous Medium [Volume 5, Issue 2, 2019, Pages 390-401]
Nayak, M.K. Effects of Non-uniform Suction, Heat Generation/Absorption and Chemical Reaction with Activation Energy on MHD Falkner-Skan Flow of Tangent Hyperbolic Nanofluid over a Stretching/Shrinking Eedge [Volume 6, Issue 3, 2020, Pages 640-652]
Nayebi, Ali Springback Modeling in L-bending Process Using Continuum Damage Mechanics Concept [Volume 1, Issue 3, 2015, Pages 161-167]
Naz, Memona Simultaneous Flow of Three Immiscible Fractional Maxwell Fluids ‎with the Clear and Hoamogeneous Porous Cylindrical Domain [Volume 6, Special Issue, 2020, Pages 1324-1334]
Nazha, Hasan Effect of Coating Materials on the Fatigue Behavior of Hip Implants: A Three-dimensional Finite Element Analysis [Volume 6, Issue 2, 2020, Pages 284-295]
Ndlovu, Partner Luyanda Numerical Analysis of Transient Heat Transfer in Radial Porous Moving Fin with Temperature Dependent Thermal Properties [Volume 6, Issue 1, 2020, Pages 137-144]
Nedkova, Nataliya Dynamical Behavior of a Rigid Body with One Fixed Point (Gyroscope). Basic Concepts and Results. Open Problems: a Review [Volume 1, Issue 4, 2015, Pages 187-206]
Nee, Alexander Comparative Study of Hybrid Lattice Boltzmann and Vorticity-‎vector Potential Modelling of 2D and 3D Natural Convection ‎Combined with Rosseland Radiation [Volume 8, Issue 4, 2022, Pages 1467-1479]
Nejat Pishkenari, Hossein Size Effect Impact on the Mechanical Behavior of an Electrically Actuated Polysilicon Nanobeam based NEMS Resonator [Volume 3, Issue 2, 2017, Pages 135-143]
Nejlaoui, Mohamed Design Optimization and Experimental Validation of Low-Cost ‎Flat Plate Collector Under Central Qasssim Climate [Volume 7, Issue 2, 2021, Pages 811-819]
Nemnem, Ahmed Miscellaneous Modeling Approaches and Testing of a Satellite Honeycomb Sandwich Plate [Volume 6, Special Issue, 2020, Pages 1084-1097]
Neufeld, João Pedro Sarasol Applicability Evidence of Constructal Design in Structural ‎Engineering: Case Study of Biaxial Elasto-Plastic Buckling of ‎Square Steel Plates with Elliptical Cutout [Volume 7, Issue 2, 2021, Pages 922-934]
Ngondiep, Eric A Robust Three-Level Time-Split MacCormack Scheme for Solving ‎Two-Dimensional Unsteady Convection-Diffusion Equation [Volume 7, Issue 2, 2021, Pages 559-577]
Nguyen, Diem Dang Weighted Dual Approach to an Equivalent Stiffness-based Load ‎Transfer Model for Jacked Open-ended Pile [Volume 7, Issue 3, 2021, Pages 1751-1763]
Nguyen, Kuu Van Weighted Dual Approach to an Equivalent Stiffness-based Load ‎Transfer Model for Jacked Open-ended Pile [Volume 7, Issue 3, 2021, Pages 1751-1763]
Nguyen, Ngoc Anh Weighted Dual Approach to an Equivalent Stiffness-based Load ‎Transfer Model for Jacked Open-ended Pile [Volume 7, Issue 3, 2021, Pages 1751-1763]
Nguyen, Pham Dinh Nonlinear Dynamic Response of Functionally Graded Porous Plates on Elastic Foundation Subjected to Thermal and Mechanical Loads [Volume 4, Issue 4, 2018, Pages 245-259]
Nguyen, Thi Phuong An Analytical Approach of Nonlinear Thermo-mechanical Buckling of Functionally Graded Graphene-reinforced Composite Laminated Cylindrical Shells under Compressive Axial Load Surrounded by Elastic Foundation [Volume 6, Issue 2, 2020, Pages 357-372]
Nguyen, Thoi Trung An Analytical Approach of Nonlinear Thermo-mechanical Buckling of Functionally Graded Graphene-reinforced Composite Laminated Cylindrical Shells under Compressive Axial Load Surrounded by Elastic Foundation [Volume 6, Issue 2, 2020, Pages 357-372]
Nguyen-Van, Hieu Nonlinear Bending Analysis of Functionally Graded Plates Using SQ4T Elements based on Twice Interpolation Strategy [Volume 6, Issue 1, 2020, Pages 125-136]
Nikkhah Bahrami, Mansour Study on Free Vibration and Wave Power Reflection in Functionally Graded Rectangular Plates using Wave Propagation Approach [Volume 5, Issue 1, 2019, Pages 77-90]
Nikolov, Svetoslav Ganchev Dynamical Behavior of a Rigid Body with One Fixed Point (Gyroscope). Basic Concepts and Results. Open Problems: a Review [Volume 1, Issue 4, 2015, Pages 187-206]
Niroomand, Mohammad Reza Design, Analysis and Manufacturing of a Bone Cutting Ultrasonic Horn-Tool and Verification with Experimental Tests [Volume 8, Issue 2, 2022, Pages 438-447]
Nishad, Chandra Shekhar Effect of Magnetic Field on Viscous Flow through Composite ‎Porous Channel using Boundary Element Method [Volume 9, Issue 4, 2023, Pages 1016-1035]
Noguez, Marco A. Discretization of the 2D Convection–Diffusion Equation Using ‎Discrete Exterior Calculus [Volume 6, Special Issue, 2020, Pages 1348-1363]
Nolot, Jean-Baptiste Finite Element and Experimental Investigation on the Effect of ‎Repetitive Shock in Corrugated Cardboard Packaging [Volume 7, Issue 2, 2021, Pages 820-830]
Noormohammadi Arani, Omid Investigation on the Crack Effect in the Cylinder and Matrix on the Backscattering Field Frequency Specifications using the Finite Element Method [Volume 8, Issue 2, 2022, Pages 448-455]
Noormohammadi Arani, Omid Calculation of Backscattered Ultrasonic Waves Field from a ‎Copper-clad Steel Rod Immersing in Water and Effect of Clad ‎Corrosion and Interfacial Disbond between Clad and Rod Defects ‎on this Field using the Finite Element Method [Volume 9, Issue 1, 2023, Pages 58-71]
Noskov, Mikhail Analysis of Possibilities to Use Predictive Mathematical Models ‎for Studying the Dam Deformation State [Volume 8, Issue 2, 2022, Pages 733-744]
Nour, Abdelkader Solving Duffing-Van der Pol Oscillator Equations of Fractional ‎Order by an Accurate Technique [Volume 7, Issue 3, 2021, Pages 1480-1487]
Nouri, Ali Dynamic Buckling of Embedded Laminated Nanocomposite Plates Based on Sinusoidal Shear Deformation Theory [Volume 2, Issue 4, 2016, Pages 254-261]
Nourouzi, Salman Experimental Study on the Surface Modification by Electrical Discharge Process [Volume 5, Issue 2, 2019, Pages 249-257]
Nuantong, Weerapon Sweep Blade Design for an Axial Wind Turbine using a Surrogate-‎assisted Differential Evolution Algorithm [Volume 9, Issue 1, 2023, Pages 217-225]
Numanoglu, Hayi Metin Bending Response of Nanobeams Resting on Elastic Foundation [Volume 4, Issue 2, 2018, Pages 105-114]
Numanoglu, Hayri Metin Application of Newmark Average Acceleration and Ritz Methods ‎on Dynamical Analysis of Composite Beams under a Moving Load [Volume 8, Issue 2, 2022, Pages 764-773]
Nussipali, Rollan Computational and Experimental Study of the Composite ‎Material for the Centrifugal Pump Impellers Manufacturing [Volume 8, Issue 4, 2022, Pages 1407-1421]
Nwaigwe, Chinedu Sequential Implicit Numerical Scheme for Pollutant and Heat Transport in a Plane-Poiseuille Flow [Volume 6, Issue 1, 2020, Pages 13-25]

O

Oganesyan, Pavel Multilevel Modeling of 1-3 Piezoelectric Energy Harvester Based ‎on Porous Piezoceramics [Volume 9, Issue 3, 2023, Pages 763-774]
Ogundare, Adebayo A. Study of the Vibration Characteristics of SA 330 Helicopter Planetary Main Gearbox [Volume 9, Issue 4, 2023, Pages 1093-1106]
Ogunmola, Bayo Yemisi Thermo-mechanical nonlinear vibration analysis of fluid-conveying structures subjected to different boundary conditions using Galerkin-Newton-Harmonic balancing method [Volume 3, Issue 1, 2017, Pages 60-79]
Oguntala, George Thermal Analysis of Convective-Radiative Fin with Temperature-Dependent Thermal Conductivity Using Chebychev Spectral Collocation Method [Volume 4, Issue 2, 2018, Pages 87-94]
OGUNTALA, George A Haar Wavelet Collocation Method for Thermal Analysis of Porous Fin with Temperature-dependent Thermal Conductivity and Internal Heat Generation [Volume 3, Issue 3, 2017, Pages 185-191]
Ojolo, Sunday J. Study of the Vibration Characteristics of SA 330 Helicopter Planetary Main Gearbox [Volume 9, Issue 4, 2023, Pages 1093-1106]
Oke, S.I. Inherent Irreversibility of Exothermic Chemical Reactive Third-Grade Poiseuille Flow of a Variable Viscosity with Convective Cooling [Volume 4, Issue 3, 2018, Pages 167-174]
Olabode, John O. Influence of Thermophysical Features on MHD Squeezed Flow of ‎Dissipative Casson Fluid with Chemical and Radiative Effects [Volume 7, Issue 4, 2021, Pages 1999-2009]
Olakunle, Salawu Analysis of Transient Rivlin-Ericksen Fluid and Irreversibility of Exothermic Reactive Hydromagnetic Variable Viscosity [Volume 6, Issue 1, 2020, Pages 26-36]
Olaye, Osamudiamen Flow and Heat Transfer Analysis of the Sodium Alginate Conveying Copper Nanoparticles between Two Parallel Plates [Volume 3, Issue 4, 2017, Pages 258-266]
Olayiwola, Patrick Concerning the Effect of a Viscoelastic Foundation on the Dynamic Stability of a Pipeline System Conveying an Incompressible Fluid [Volume 2, Issue 2, 2016, Pages 96-117]
Olayiwola, Patrick Shola Deformation Characteristics of Composite Structures [Volume 2, Issue 3, 2016, Pages 174-191]
Oleinik, Phelype Haron WaveMIMO Methodology: Numerical Wave Generation of a ‎Realistic Sea State‎ [Volume 7, Issue 4, 2021, Pages 2129-2148]
Oliveira Rocha, Luiz Alberto Multiobjective Geometric Analysis of Stiffened Plates under ‎Bending through Constructal Design Method [Volume 6, Special Issue, 2020, Pages 1438-1449]
Olofinkua, Joseph O. Flow and Heat Transfer Analysis of the Sodium Alginate Conveying Copper Nanoparticles between Two Parallel Plates [Volume 3, Issue 4, 2017, Pages 258-266]
Olunloyo, Vincent Concerning the Effect of a Viscoelastic Foundation on the Dynamic Stability of a Pipeline System Conveying an Incompressible Fluid [Volume 2, Issue 2, 2016, Pages 96-117]
Olusoji Fatunmbi, Ephesus Analysis of Entropy Generation in Hydromagnetic Micropolar Fluid Flow over an Inclined Nonlinear Permeable Stretching Sheet with Variable Viscosity [Volume 6, Special Issue, 2020, Pages 1301-1313]
Omidinasab, Fereydoon Finite Element Analysis for CFST Columns under Blast Loading [Volume 3, Issue 4, 2017, Pages 283-292]
Omidinasab, Fereydoon A Hybrid Particle Swarm Optimization and Genetic Algorithm for Truss Structures with Discrete Variables [Volume 6, Issue 3, 2020, Pages 593-604]
Orlande, Helcio Rangel Barreto Analysis of Particulate Systems with Numerical Inverse Laplace Transform [Volume 9, Issue 4, 2023, Pages 926-934]
Orłowska, Anita On/off Nodal Reconfiguration for Global Structural Control of ‎Smart 2D Frames [Volume 7, Special Issue, 2021, Pages 1121-1129]
Orozco Murillo, William Analysis of a Jet Pump Performance under Different Primary Nozzle ‎Positions and Inlet Pressures using two Approaches: One Dimensional ‎Analytical Model and Three Dimensional CFD Simulations‎ [Volume 6, Special Issue, 2020, Pages 1228-1244]
Orozco Murillo, William Geometric Optimization of Jet Pump Used in Vacuum ‎Distillation Applications under Different Operating Conditions ‎using Genetic-algorithm Methods [Volume 8, Issue 1, 2022, Pages 340-358]
Osheku, Charles Concerning the Effect of a Viscoelastic Foundation on the Dynamic Stability of a Pipeline System Conveying an Incompressible Fluid [Volume 2, Issue 2, 2016, Pages 96-117]
Osheku, Charles Attah Thermo-mechanical nonlinear vibration analysis of fluid-conveying structures subjected to different boundary conditions using Galerkin-Newton-Harmonic balancing method [Volume 3, Issue 1, 2017, Pages 60-79]
Ossia, Chinwuba Victor Analysis of the Coupled Nonlinear Vibration of a Two-Mass System [Volume 5, Issue 5, 2019, Pages 935-950]
Ostertak, Dmitriy I. Impact-enhanced Electrostatic Vibration Energy Harvester [Volume 8, Issue 2, 2022, Pages 671-683]
Otegbeye, O. A Paired Quasi-linearization on Magnetohydrodynamic Flow and Heat Transfer of Casson Nanofluid with Hall Effects [Volume 5, Issue 5, 2019, Pages 849-860]
Otegbeye, O. Magnetohydrodynamic Bio-convective Casson Nanofluid Flow: A Numerical Simulation by Paired Quasilinearisation [Volume 7, Issue 4, 2021, Pages 2024-2039]
Ouakad, Hassen Size Effect Impact on the Mechanical Behavior of an Electrically Actuated Polysilicon Nanobeam based NEMS Resonator [Volume 3, Issue 2, 2017, Pages 135-143]
OUAKAD, Hassen M. Pull-in Phenomenon in the Electrostatically Micro-switch ‎Suspended between Two Conductive Plates using the Artificial ‎Neural Network [Volume 8, Issue 4, 2022, Pages 1222-1235]
Oucif, Chahmi Cyclic and Monotonic Behavior of Strengthened and Unstrengthened Square Reinforced Concrete Columns [Volume 5, Special Issue: Computational Methods for Material Failure, 2019, Pages 517-525]
Oucif, Chahmi Modeling of Self-Healing Concrete: A Review [Volume 5, Special Issue: Computational Methods for Material Failure, 2019, Pages 526-539]
Outa, Roberto Prognosis and Detection of Experimental Failures in Open Field Diesel ‎Engines Applying Wiener's Artificial Immunological Systems [Volume 7, Issue 1, 2021, Pages 1-12]
Outa, Roberto Analysis and Recognition of Standards in Intelligent Hybrid ‎Systems using Natural Computing [Volume 7, Issue 3, 2021, Pages 1764-1773]
Ouzaa, Kheira Cyclic and Monotonic Behavior of Strengthened and Unstrengthened Square Reinforced Concrete Columns [Volume 5, Special Issue: Computational Methods for Material Failure, 2019, Pages 517-525]
Ozturk, Duygu A Method for Determination of the Fundamental Period of Layered Soil Profiles [Volume 3, Issue 4, 2017, Pages 267-273]

P

Pacheco-Chérrez, Josué Measuring Crack-type Damage Features in Thin-walled ‎Composite Beams using De-noising and a 2D Continuous Wavelet ‎Transform of Mode Shapes [Volume 7, Issue 1, 2021, Pages 355-371]
Padma, P. Numerical Scrutinization of Three Dimensional Casson-Carreau Nano Fluid Flow [Volume 6, Issue 3, 2020, Pages 531-542]
Pakhaliuk, Vladimir Ivanovich Reducing the Wear of the UHMWPE Used in the Total Hip ‎Replacement after Low-Pressure Plasma Treatment [Volume 8, Issue 3, 2022, Pages 1035-1042]
Pakhare, K.S. Simple Two Variable Refined Theory for Shear Deformable Isotropic Rectangular Beams [Volume 6, Issue 3, 2020, Pages 394-415]
Pal, Prakash Chandra Love Wave Propagation in a Fiber-reinforced Layer with Corrugated Boundaries Overlying Heterogeneous Half-space [Volume 5, Issue 5, 2019, Pages 926-934]
Palacio-Fernández, José A. Geometric Optimization of Jet Pump Used in Vacuum ‎Distillation Applications under Different Operating Conditions ‎using Genetic-algorithm Methods [Volume 8, Issue 1, 2022, Pages 340-358]
Palacio-Fernande, José Alfredo Analysis of a Jet Pump Performance under Different Primary Nozzle ‎Positions and Inlet Pressures using two Approaches: One Dimensional ‎Analytical Model and Three Dimensional CFD Simulations‎ [Volume 6, Special Issue, 2020, Pages 1228-1244]
Pallante, Chiara Linear dynamic response of nanobeams accounting for higher gradient effects [Volume 2, Issue 2, 2016, Pages 54-64]
Panagiotopoulos, Alexander D. Explicit and Implicit Finite -Volume Methods for Depth Averaged Free-Surface Flows [Volume 6, Special Issue, 2020, Pages 1270-1282]
Pancella, Francesca Flexural-Torsional Galloping of Prismatic Structures with Double-Symmetric Cross-Section [Volume 7, Special Issue, 2021, Pages 1049-1069]
Pandey, Prashant Numerical Solution of the Time Fractional Reaction-advection-diffusion Equation in Porous Media [Volume 8, Issue 1, 2022, Pages 84-96]
Pandit, Biswajit On Approximate Stationary Radial Solutions for a Class of Boundary Value Problems Arising in Epitaxial Growth Theory [Volume 6, Issue 4, 2020, Pages 713-734]
Pandit, Biswajit A New Taylor Series based Numerical Method: Simple, Reliable, and Promising [Volume 9, Issue 4, 2023, Pages 1122-1134]
Panedpojaman, Pattamad Nonlinear Winkler-based Frame Element with Inclusion of Shear-Flexure Interaction Effect for Analysis of Non-Ductile RC Members on Foundation [Volume 7, Issue 1, 2021, Pages 148-164]
Panedpojaman, Pattamad Design of Cellular Members under Axial-Shear-Flexure Interaction [(Articles in Press)]
Panigrahi, S. K. A DWT and SVM based method for rolling element bearing fault diagnosis and its comparison with Artificial Neural Networks [Volume 3, Issue 1, 2017, Pages 80-91]
Papazafeiropoulos, George Investigation of the Static Bending Response of FGM Sandwich Plates [Volume 10, Issue 1, 2024, Pages 26-37]
Pappalardo, Carmine Maria A General Multibody Approach for the Linear and Nonlinear Stability Analysis of Bicycle Systems. Part I: Methods of Constrained Dynamics [Volume 7, Issue 2, 2021, Pages 655-670]
Pappalardo, Carmine Maria A General Multibody Approach for the Linear and Nonlinear Stability Analysis of Bicycle Systems. Part II: Application to the Whipple-Carvallo Bicycle Model [Volume 7, Issue 2, 2021, Pages 671-700]
Pappalardo, Carmine Maria On the Analytical and Computational Methodologies for Modelling Two-wheeled Vehicles within the Multibody Dynamics Framework: A Systematic Literature Review [Volume 8, Issue 1, 2022, Pages 153-181]
Pappalardo, Carmine Maria Multibody Modeling and Nonlinear Control of a Pantograph Scissor Lift Mechanism [Volume 9, Issue 1, 2023, Pages 129-167]
Pappalardo, Carmine Maria A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part I: Analytical Methods and Computational Algorithms [Volume 9, Issue 2, 2023, Pages 529-549]
Pappalardo, Carmine Maria A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part II: Numerical Analysis and Experimental Testing [Volume 9, Issue 2, 2023, Pages 550-589]
Parand, Kourosh An Efficient Numerical Method to Solve the Boundary Layer Flow of an Eyring-Powell Non-Newtonian Fluid [Volume 5, Issue 2, 2019, Pages 454-467]
Park, Y.H. Development of an Educational Code of Deriving Equations of ‎Motion and Analyzing Dynamic Characteristics of Multibody ‎Closed Chain Systems using GNU Octave for a Beginner [Volume 8, Issue 1, 2022, Pages 232-244]
Park, Yonghui Stability Assessment of the Flexible System using Redundancy [Volume 6, Issue 3, 2020, Pages 471-479]
Park, Yonghui Dynamic Investigation of Non-linear Behavior of Hydraulic Cylinder in Mold Oscillator using PID Control Process [Volume 7, Issue 1, 2021, Pages 270-276]
Park, Yonghui An Automatic Program of Generation of Equation of Motion and ‎Dynamic Analysis for Multi-body Mechanical System using GNU Octave [Volume 7, Issue 3, 2021, Pages 1687-1697]
PasandidehFard, Mahmoud Performance Investigation of Simple Low-dissipation AUSM ‎‎(SLAU) Scheme in Modeling of 2-D Inviscid Flow in Steam ‎Turbine Cascade Blades [Volume 9, Issue 2, 2023, Pages 332-345]
Pasdar, Amir Hossein A Comparative Study on the Efficiency of Compiled Languages ‎and MATLAB/Simulink for Simulation of Highly Nonlinear ‎Automotive Systems [Volume 8, Issue 3, 2022, Pages 853-864]
Pasha, Amjad Ali Study of Parameters Affecting Separation Bubble Size in High Speed Flows using k-ω Turbulence Model [Volume 4, Issue 2, 2018, Pages 95-104]
Pashaei, Mohammad Hadi Solution of strongly nonlinear oscillator problem arising in Plasma Physics with Newton Harmonic Balance Method [Volume 1, Issue 2, 2015, Pages 59-66]
Pashaei, Mohammad Hadi Estimating the Mode Shapes of a Bridge Using Short Time Transmissibility Measurement from a Passing Vehicle [Volume 5, Issue 4, 2019, Pages 735-748]
Pashmforoush, Farzad Finite Element Analysis of Low Velocity Impact on Carbon Fibers/Carbon Nanotubes Reinforced Polymer Composites [Volume 6, Issue 3, 2020, Pages 383-393]
Pathania, Vijayata Thermoelastic Modeling with Dual Porosity Interacting with an Inviscid Liquid [Volume 10, Issue 1, 2024, Pages 111-124]
Pati, Prasenjit Love Wave Propagation in a Fiber-reinforced Layer with Corrugated Boundaries Overlying Heterogeneous Half-space [Volume 5, Issue 5, 2019, Pages 926-934]
Patil, P.M. Non-similar Solutions of MHD Mixed Convection over an Exponentially Stretching Surface: Influence of Non-uniform Heat Source or Sink [Volume 7, Issue 3, 2021, Pages 1334-1347]
Patiño Arcila, Iván D. Geometric Optimization of Jet Pump Used in Vacuum ‎Distillation Applications under Different Operating Conditions ‎using Genetic-algorithm Methods [Volume 8, Issue 1, 2022, Pages 340-358]
Patiño Arcila, Iván David Analysis of a Jet Pump Performance under Different Primary Nozzle ‎Positions and Inlet Pressures using two Approaches: One Dimensional ‎Analytical Model and Three Dimensional CFD Simulations‎ [Volume 6, Special Issue, 2020, Pages 1228-1244]
Patiño Arcila, Iván David Fluid-dynamic Simulations for Assessment of Dimensioning ‎Methodologies of Pelton Turbine Buckets Considering the Initial ‎Torque Overcoming [Volume 9, Issue 4, 2023, Pages 1036-1048]
Patra, A. Effects of Non-uniform Suction, Heat Generation/Absorption and Chemical Reaction with Activation Energy on MHD Falkner-Skan Flow of Tangent Hyperbolic Nanofluid over a Stretching/Shrinking Eedge [Volume 6, Issue 3, 2020, Pages 640-652]
Paulo Davim, J. Analysis and Optimization of Truss Structures, Constrained ‎Handling using Genetic Algorithm [Volume 7, Issue 3, 2021, Pages 1324-1333]
Pavanello, Renato Topology Optimization of the Thickness Profile of Bimorph Piezoelectric Energy Harvesting Devices [Volume 5, Issue 1, 2019, Pages 113-127]
Pavlovic, Ana Applicability Evidence of Constructal Design in Structural ‎Engineering: Case Study of Biaxial Elasto-Plastic Buckling of ‎Square Steel Plates with Elliptical Cutout [Volume 7, Issue 2, 2021, Pages 922-934]
Pavlovic, Ana Thermal Behavior of Monocrystalline Silicon Solar Cells: A ‎Numerical and Experimental Investigation on the Module ‎Encapsulation Materials [Volume 7, Issue 3, 2021, Pages 1847-1855]
Pavlovic, Ana Finite Elements Analysis of the Hyperelastic Impeller Rotating in ‎the Self-Priming Pump [Volume 8, Issue 3, 2022, Pages 1103-1112]
Pedroso, Lineu A Comparative Analysis of TLCD-Equipped Shear Buildings under Dynamic Loads [Volume 5, Issue 1, 2019, Pages 40-45]
Peng, Ke-Cheng Different Groups of Variational Principles for Whitham-Broer-‎Kaup Equations in Shallow Water [Volume 6, Special Issue, 2020, Pages 1178-1183]
Peng, Ke-Cheng Variational Principles for Two Compound Nonlinear Equations ‎with Variable Coefficients [Volume 7, Issue 2, 2021, Pages 415-421]
Peng, Ke-Cheng Variational Principles and Solitary Wave Solutions of Generalized ‎Nonlinear Schrödinger Equation in the Ocean [Volume 7, Issue 3, 2021, Pages 1639-1648]
Peplin, Fedor Method of Unsteady Hydrodynamic Characteristics ‎Determination in Turbulent Boundary Layer [Volume 7, Issue 2, 2021, Pages 849-857]
Periyadurai, K Impact of Magnetic Field on Convective Flow of a Micropolar Fluid with two Parallel Heat Source [Volume 5, Issue 4, 2019, Pages 652-666]
Pescador Tonetto, Cristiane Four Legged Guará Robot: From Inspiration to Implementation [Volume 7, Issue 3, 2021, Pages 1425-1434]
Petrov, Andrey Dynamic Response of a Step Loaded Cubic Cavity Embedded in a ‎Partially Saturated Poroelastic Half-space by the Boundary ‎Element Method [Volume 8, Issue 1, 2022, Pages 331-339]
Petrova, Tatyana Two-dimensional Stress and strain Analysis for Graphene-‎polymer Nanocomposite under Axial Load [Volume 8, Issue 3, 2022, Pages 1065-1075]
Pham, Quoc Hoa Free Vibration Analysis of Functionally Graded Porous Nano-‎plates with Different Shapes Resting on Elastic Foundation [Volume 7, Issue 3, 2021, Pages 1593-1605]
Pholdee, Nantiwat Sweep Blade Design for an Axial Wind Turbine using a Surrogate-‎assisted Differential Evolution Algorithm [Volume 9, Issue 1, 2023, Pages 217-225]
Phungpaingam, Boonchai Accuracy and Convergence Rate Comparative Investigation on ‎Polytope Smoothed and Scaled Boundary Finite Element [Volume 9, Issue 1, 2023, Pages 226-238]
Piana, Gianfranco Long-span Suspension Bridge Flutter Analysis ‎with Drag Force Effects [Volume 7, Special Issue, 2021, Pages 1077-1089]
Piccardo, Giuseppe Flexural-Torsional Galloping of Prismatic Structures with Double-Symmetric Cross-Section [Volume 7, Special Issue, 2021, Pages 1049-1069]
Piccardo, Giuseppe Editorial [Volume 7, Special Issue, 2021]
Pinto, Vinícius Torres Applicability Evidence of Constructal Design in Structural ‎Engineering: Case Study of Biaxial Elasto-Plastic Buckling of ‎Square Steel Plates with Elliptical Cutout [Volume 7, Issue 2, 2021, Pages 922-934]
Pinto, Vinícius Torres Multiobjective Geometric Analysis of Stiffened Plates under ‎Bending through Constructal Design Method [Volume 6, Special Issue, 2020, Pages 1438-1449]
Piovan, Marcelo Tulio Self-damping of Optical Ground Wire‎ Cables: A Bayesian Approach [Volume 9, Issue 1, 2023, Pages 205-216]
Piskunov, Vladimir A. Modeling of Flight of the Line Thrower Projectile [Volume 7, Special Issue, 2021, Pages 1070-1076]
Piyaphipat, Suthee Accuracy and Convergence Rate Comparative Investigation on ‎Polytope Smoothed and Scaled Boundary Finite Element [Volume 9, Issue 1, 2023, Pages 226-238]
Plevris, Vagelis Investigation of the Static Bending Response of FGM Sandwich Plates [Volume 10, Issue 1, 2024, Pages 26-37]
Pnevmatikos, Nikos Pole placement algorithm for control of civil structures subjected to earthquake excitation [Volume 3, Issue 1, 2017, Pages 25-36]
Poliakov, Aleksandr Mikhailovich Reducing the Wear of the UHMWPE Used in the Total Hip ‎Replacement after Low-Pressure Plasma Treatment [Volume 8, Issue 3, 2022, Pages 1035-1042]
Polyakov, Pavel O. Moment-Inertial Factor as a Criterion for Assessing the ‎Dimension of an Aircraft [Volume 8, Issue 4, 2022, Pages 1307-1314]
Ponce de León Puig, Nubia Ilia Predictive Control with Dynamic Hysteresis ‎Reference ‎Trajectory: Application to a Structural Base-‎Isolation ‎Model [Volume 7, Special Issue, 2021, Pages 1242-1251]
Pontes, Fabio A. Hybrid Solution for the Analysis of MHD Micropolar Fluid Flow in a Vertical Porous Parallel-Plates Duct [Volume 6, Special Issue, 2020, Pages 1107-1124]
Pontes, Péricles C. Hybrid Solution for the Analysis of MHD Micropolar Fluid Flow in a Vertical Porous Parallel-Plates Duct [Volume 6, Special Issue, 2020, Pages 1107-1124]
Poonam, K.K New Exact Traveling Wave Solutions for Fractional Order System ‎Describing the Second Grade Fluid through Medium with Heat ‎Transfer‎ [Volume 7, Issue 2, 2021, Pages 764-781]
Poornima, T. Non-linear Radiation and Navier-slip effects on UCM Nanofluid ‎Flow past a Stretching Sheet under Lorentzian Force [Volume 7, Issue 2, 2021, Pages 638-645]
Pop, Ioan MHD Flow and Heat Transfer of SiC-TiO2/DO Hybrid Nanofluid due to a Permeable Spinning Disk by a Novel Algorithm [Volume 5, Issue 5, 2019, Pages 976-988]
Pop, Ioan Analysis of Dual Solutions of Unsteady Micropolar Hybrid ‎Nanofluid Flow over a Stretching/Shrinking Sheet [Volume 7, Issue 1, 2021, Pages 19-33]
Pop, Ioan Insight into Stability Analysis on Modified Magnetic Field of ‎Radiative Non-Newtonian Reiner–Philippoff Fluid Model‎ [Volume 8, Issue 2, 2022, Pages 745-753]
Pop, Ioan Comments on the paper “Nonlinear Convective Flow of Maxwell ‎Fluid over a Slendering Stretching Sheet with Heat Source/Sink, ‎Mocherla Gayatri, Konda Jayaramireddy, Macherla Jayachandra ‎Babu, J. Appl. Comput. Mech., 8(1), 2022, 60-70”‎ [Volume 8, Issue 3, 2022, Pages 1032-1034]
Popa, Constantin The Permutation Entropy and its Applications on Fire Tests Data [Volume 6, Special Issue, 2020, Pages 1380-1393]
Poplawski, Blazej On/off Nodal Reconfiguration for Global Structural Control of ‎Smart 2D Frames [Volume 7, Special Issue, 2021, Pages 1121-1129]
Popov, Ivan Hemispherical Resonator of a Rate-integrating Gyroscope: A ‎Novel Method for Determination of Eigenfrequencies and ‎Eigenforms in Presence of Imperfections‎ [Volume 9, Issue 4, 2023, Pages 915-925]
Poquillon, Dominique Using the Finite Element Analysis Method to Study the 3-point Bending Test for the Characterization of the Adherence [Volume 6, Issue 3, 2020, Pages 505-516]
Pourabdy, Mortaza Analysis of Axisymmetric Vibration of Functionally-Graded ‎Circular Nano-Plate Based on the Integral Form of the Strain ‎Gradient Model [Volume 7, Issue 4, 2021, Pages 2196-2220]
Pourmirzaagha, Hamoon The Urban Path Routing Adjustable Optimization by Means of Wavelet Transform and Multistage Genetic Algorithm [Volume 5, Issue 4, 2019, Pages 696-703]
Pourmoayed, Ali Buckling and Vibration Analysis of a Double-layer Graphene ‎Sheet Coupled with a Piezoelectric Nanoplate [Volume 8, Issue 1, 2022, Pages 129-143]
Pourmoayed, A.R. Optimization of the Prismatic Core Sandwich Panel under Buckling Load and Yield Stress Constraints using an Improved Constrained Differential Evolution Algorithm [Volume 6, Issue 4, 2020, Pages 920-933]
Pourzeynali, Saeid Optimizing Multidirectional Torsional Hysteretic Damper Specifications using Harmony Search [Volume 10, Issue 1, 2024, Pages 80-91]
Pozo, Francesc Manifold Learning Algorithms Applied to Structural Damage ‎Classification [Volume 7, Special Issue, 2021, Pages 1158-1166]
Prachasaree, Woraphot Nonlinear Winkler-based Frame Element with Inclusion of Shear-Flexure Interaction Effect for Analysis of Non-Ductile RC Members on Foundation [Volume 7, Issue 1, 2021, Pages 148-164]
Prado Leite, Leonardo Fellipe Analytical Expressions for the Singularities Treatment in the ‎Three-dimensional Elastostatic Boundary Element Method [Volume 7, Issue 2, 2021, Pages 739-751]
Pramod, A.L.N. Evaluation of Fracture Parameters by Coupling the Edge-Based Smoothed Finite Element Method and the Scaled Boundary Finite Element Method [Volume 5, Special Issue: Computational Methods for Material Failure, 2019, Pages 540-551]
Prapamonthon, Prasert A Stress Tensor-based Failure Criterion for Ordinary State-based ‎Peridynamic Models‎ [Volume 8, Issue 2, 2022, Pages 617-628]
Prasad, K.V. Effects of Inclined Magnetic Field and Porous Medium on Peristaltic Flow of a Bingham Fluid with Heat Transfer [Volume 7, Issue 4, 2021, Pages 1892-1906]
Precious, Otobo E. Dynamic Analysis of the Biomechanical Model of Head Load Impact Using Differential Transform Method [Volume 6, Issue 4, 2020, Pages 893-907]
Preumont, André Precision Shape Control of Ultra-thin Shells with Strain Actuators [Volume 7, Special Issue, 2021, Pages 1130-1137]
Probst, Oliver Measuring Crack-type Damage Features in Thin-walled ‎Composite Beams using De-noising and a 2D Continuous Wavelet ‎Transform of Mode Shapes [Volume 7, Issue 1, 2021, Pages 355-371]
Probst, Oliver In-Plane Shear-Axial Strain Coupling Formulation for Shear-‎Deformable Composite Thin-Walled Beams [Volume 7, Issue 2, 2021, Pages 450-469]
Prokudin, Aleksandr Schmidt-Ishlinskii Yield Criterion and a Rotating Cylinder with a ‎Rigid Inclusion [Volume 7, Issue 2, 2021, Pages 858-869]
Prosviryakov, Evgenii Exact Solutions for Isobaric Inhomogeneous Couette Flows of a ‎Vertically Swirling Fluid [Volume 9, Issue 2, 2023, Pages 521-528]
Prosviryakov, Evgeniy Inhomogeneous Gradient Poiseuille Flows of a Vertically Swirled Fluid [Volume 10, Issue 1, 2024, Pages 1-12]
Pryazhnikov, A.I. Verification and Validation of a Network Algorithm for Single-phase Flow Modeling using Microfluidic Experiments [Volume 9, Issue 4, 2023, Pages 1156-1167]
Pryazhnikov, Andrey I. Flow Regimes Characteristics of Water-crude Oil in a Rectangular ‎Y-microchannel [Volume 8, Issue 2, 2022, Pages 655-670]
Pryazhnikov, Maxim I. Flow Regimes Characteristics of Water-crude Oil in a Rectangular ‎Y-microchannel [Volume 8, Issue 2, 2022, Pages 655-670]
Pryazhnikov, M.I. Numerical Investigation of Enhanced Oil Recovery from various ‎Rocks by Nanosuspensions Flooding [Volume 8, Issue 1, 2022, Pages 306-318]
Pullin, Rhys On the Use of Acoustic Emission and Digital Image Correlation for Welded Joints Damage Characterization [Volume 5, Issue 2, 2019, Pages 381-389]
Puneeth, V. Theoretical Study of Convective Heat Transfer in Ternary ‎Nanofluid Flowing past a Stretching Sheet [Volume 8, Issue 4, 2022, Pages 1279-1286]
Purbolaksono, Judha Thermomechanical Stresses of Multilayered Wellbore Structure ‎of Underground Hydrogen Storage – A Simplified Solution Based ‎on Recursive Algorithm [Volume 8, Issue 4, 2022, Pages 1287-1298]

Q

Qi, Haitao Transient Electro-osmotic Slip Flow of an Oldroyd-B Fluid with Time-fractional Caputo-Fabrizio Derivative [Volume 5, Issue 4, 2019, Pages 779-790]
Qian, Zhenghua Lamb Wave Analysis in Anisotropic Multilayer ‎Piezoelectric-piezomagnetic Material [Volume 8, Issue 2, 2022, Pages 629-640]
Quang, Vu Dinh Nonlinear Dynamic Response of Functionally Graded Porous Plates on Elastic Foundation Subjected to Thermal and Mechanical Loads [Volume 4, Issue 4, 2018, Pages 245-259]
Quaresma, João Nazareno Nonato Analysis of Particulate Systems with Numerical Inverse Laplace Transform [Volume 9, Issue 4, 2023, Pages 926-934]
Quaresma, João N.N. Hybrid Solution for the Analysis of MHD Micropolar Fluid Flow in a Vertical Porous Parallel-Plates Duct [Volume 6, Special Issue, 2020, Pages 1107-1124]
Quaresma, João N.N. Parameter Estimation in Population Balance through Bayesian ‎Technique Markov Chain Monte Carlo [Volume 7, Issue 2, 2021, Pages 890-901]

R

Rabah, BOURENANE Heat Transfer in Hydro-Magnetic Nano-Fluid Flow between Non-Parallel Plates Using DTM [Volume 4, Issue 4, 2018, Pages 352-364]
Rabbani, Kianoush A Closed-Form Solution for Electro-Osmotic Flow in Nano-Channels [Volume 8, Issue 2, 2022, Pages 510-517]
Rabbani, Omar A Kinetic Flux-vector Splitting Scheme for Two-layer Shallow Flow Model [Volume 8, Issue 3, 2022, Pages 1043-1053]
Rabczuk, Timon Preface [Volume 5, Special Issue: Computational Methods for Material Failure, 2019]
Rabeti, Masoud Potential of Semi-Empirical Heat Transfer Models in Predicting ‎the Effects of Equivalence Ratio on Low Temperature Reaction ‎and High Temperature Reaction Heat Release of an HCCI Engine [Volume 9, Issue 1, 2023, Pages 45-57]
Rabiei, Faranak Numerical Simulation of Fuzzy Volterra Integro-differential ‎Equation using Improved Runge-Kutta Method [Volume 9, Issue 1, 2023, Pages 72-82]
Radi, Enrico Pull-in Instability Analysis of a Nanocantilever Based on the ‎Two-Phase Nonlocal Theory of Elasticity [Volume 8, Issue 4, 2022, Pages 1456-1466]
Radman, Arash Optimizing Multidirectional Torsional Hysteretic Damper Specifications using Harmony Search [Volume 10, Issue 1, 2024, Pages 80-91]
Raeisifard, Hamed Vibration Analysis of Different Types of Porous FG Conical Sandwich Shells in Various Thermal Surroundings [Volume 6, Issue 3, 2020, Pages 416-432]
Rafat, Mohsen A Novel Flexible Lane Changing (FLC) Method in Complicated ‎Dynamic Environment for Automated Vehicles [Volume 9, Issue 2, 2023, Pages 318-331]
Ragupathi, P. Three Dimensional Non-linear Radiative Nanofluid Flow over a Riga Plate [Volume 6, Issue 4, 2020, Pages 1012-1029]
Rahimi, Gholam Hossien Buckling and Vibration Analysis of Tapered Circular Nano Plate [Volume 4, Issue 1, 2018, Pages 40-54]
Rahman, Md. Saifur Modified Multi-level Residue Harmonic Balance Method for Solving Nonlinear Vibration Problem of Beam Resting on Nonlinear Elastic Foundation [Volume 5, Issue 4, 2019, Pages 627-638]
Rahmani, Mohsen Vibration Analysis of Different Types of Porous FG Conical Sandwich Shells in Various Thermal Surroundings [Volume 6, Issue 3, 2020, Pages 416-432]
Rahmanzadeh, Mostafa The Development and Application of the RCW Method for the Solution of the Blasius Problem [Volume 6, Issue 1, 2020, Pages 105-111]
Rahmati, Mohammad Forced Response of a Low-Pressure Turbine Blade using ‎Spectral/hp Element Method: Direct Numerical Simulation‎ [Volume 7, Issue 1, 2021, Pages 135-147]
Rahmati, Mohammad An Experimental and Numerical Study on the Aerodynamic ‎Performance of Vibrating Wind Turbine Blade with Frequency-‎Domain Method [Volume 7, Issue 3, 2021, Pages 1737-1750]
Rahnama, Mohammadi Investigation of Nanoﬂuid Natural Convection Heat Transfer in ‎Open Ended L-shaped Cavities utilizing LBM [Volume 7, Issue 4, 2021, Pages 2064-2083]
Rahnama, Saeed Theoretical and Experimental Investigation on Mechanical Behavior of Aluminum to Aluminum Tubular Bonded Lap Joint under Pure Torsion and a Finite Element Comparison with Hybrid Rivet/Bonded Joint [Volume 8, Issue 2, 2022, Pages 485-492]
Rajakumar, Charles Finite Element Modelling and Simulation of the Hysteretic ‎Behaviour of Single- and Bi-metal Cantilever Beams using a ‎Modified Non-linear Beta-damping Model [Volume 7, Issue 3, 2021, Pages 1663-1675]
Rajaratnam, Nallamuthu A Note on the Discharge over Full-width Rectangular Sharp-‎crested Weirs and Weirs of Finite Crest Length‎ [Volume 9, Issue 2, 2023, Pages 458-463]
Rajasekhara Gowd, Y. Heat and Mass Transfer Analysis on MHD Peristaltic Prandtl Fluid Model through a Tapered Channel with Thermal Radiation [Volume 5, Issue 5, 2019, Pages 951-963]
Rajashekhar, C. Effects of Inclined Magnetic Field and Porous Medium on Peristaltic Flow of a Bingham Fluid with Heat Transfer [Volume 7, Issue 4, 2021, Pages 1892-1906]
Rajesh, Ravi Heat and Mass Transfer Analysis on MHD Peristaltic Prandtl Fluid Model through a Tapered Channel with Thermal Radiation [Volume 5, Issue 5, 2019, Pages 951-963]
Raju, M.C Effects of Thermal Diffusion and Radiation on Magnetohydrodynamic (MHD) Chemically Reacting Fluid Flow Past a Vertical Plate in a Slip Flow Regime [Volume 5, Issue 2, 2019, Pages 334-343]
Rakhshkhorshid, Masoud Evaluating the Delamination in the Drilling Process of a Melamine Coated Medium Density Fiberboard (MDF) [Volume 8, Issue 1, 2022, Pages 1-10]
Ramachandra Prasad, V. Viscoelastic Micropolar Convection Flows from an Inclined Plane with Nonlinear Temperature: A Numerical Study [Volume 6, Issue 2, 2020, Pages 183-199]
Ramachandra Prasad, V. Melting Heat Transfer Analysis on Magnetohydrodynamics Buoyancy Convection in an Enclosure: A Numerical Study [Volume 6, Issue 1, 2020, Pages 52-62]
Ramachandra Prasad, V. Polymeric Dissipative Convection Flow from an Inclined Plane with Chemical Reaction: Numerical Study [Volume 8, Issue 2, 2022, Pages 416-428]
Ramana Reddy, G.V. Numerical Scrutinization of Three Dimensional Casson-Carreau Nano Fluid Flow [Volume 6, Issue 3, 2020, Pages 531-542]
Ramana Reddy, J.V. Impact of Blood Vessel Wall Flexibility on the Temperature and Concentration Dispersion [Volume 6, Issue 3, 2020, Pages 564-581]
Ramesh, A. Numerical Modeling and Multi Objective Optimization of Face Milling of AISI 304 Steel [Volume 5, Issue 4, 2019, Pages 749-762]
Ramesh, G.K. Magneto Casson-Carreau Fluid Flow through a Circular Porous ‎Cylinder with Partial Slip‎ [Volume 8, Issue 4, 2022, Pages 1208-1221]
Ramesh Reddy, P. Viscoelastic Micropolar Convection Flows from an Inclined Plane with Nonlinear Temperature: A Numerical Study [Volume 6, Issue 2, 2020, Pages 183-199]
Ramezannejad Azarboni, Habib Nonlinear Primary Frequency Response Analysis of Self-‎Sustaining Nanobeam Considering Surface Elasticity [Volume 8, Issue 4, 2022, Pages 1196-1207]
Ramiar, Abas Investigation of Visco-rheological Properties of Polymeric Fluid on Electrothermal Pumping [Volume 10, Issue 1, 2024, Pages 164-182]
Raminnea, Morteza Optimum Design of FGX-CNT-Reinforced Reddy Pipes Conveying Fluid Subjected to Moving Load [Volume 2, Issue 4, 2016, Pages 243-253]
Ramirez, David Bending and Free Vibration Analysis of Functionally Graded Plates via Optimized Non-polynomial Higher Order Theories [Volume 5, Issue 2, 2019, Pages 281-298]
Rana, G. C. Effect of Throughflow on the Convective Instabilities in an ‎Anisotropic Porous Medium Layer with Inconstant Gravity [Volume 7, Issue 4, 2021, Pages 1964-1972]
Rana, Puneet Multiple Solutions for Slip Effects on Dissipative Magneto-Nanofluid Transport Phenomena in Porous Media: Stability Analysis [Volume 6, Issue 4, 2020, Pages 956-967]
Rana, Puneet Magneto-bio-thermal Convection in Rotating Nanoliquid ‎containing Gyrotactic Microorganism [Volume 7, Issue 4, 2021, Pages 1973-1986]
Rana, Puneet Non-similar Radiative Bioconvection Nanofluid Flow under ‎Oblique Magnetic Field with Entropy Generation‎ [Volume 8, Issue 1, 2022, Pages 206-218]
Randjbaran, Elias Impacts of Volume of Carbon Nanotubes on Bending for Carbon-‎Kevlar Hybrid Fabrics [Volume 7, Issue 2, 2021, Pages 839-848]
Ranjbar, Ali Akbar Potential of Semi-Empirical Heat Transfer Models in Predicting ‎the Effects of Equivalence Ratio on Low Temperature Reaction ‎and High Temperature Reaction Heat Release of an HCCI Engine [Volume 9, Issue 1, 2023, Pages 45-57]
Rao, T. H. Determination of the Optimal Reduction Ratio for Least Springback during Cold Drawing of Seamless Tubes [Volume 4, Issue 4, 2018, Pages 275-285]
Rashed, Ahmed Saad Behavior of Nanofluid with Variable Brownian and Thermal ‎Diffusion Coefficients Adjacent to a Moving Vertical Plate [Volume 7, Issue 3, 2021, Pages 1466-1479]
Rashidi, Mohammad Mehdi Heat Transfer in Hydro-Magnetic Nano-Fluid Flow between Non-Parallel Plates Using DTM [Volume 4, Issue 4, 2018, Pages 352-364]
Rashidi, Mohammad Mehdi Magnetohydrodynamic Free Convection Flows with Thermal Memory over a Moving Vertical Plate in Porous Medium [Volume 5, Issue 1, 2019, Pages 150-161]
Rashidi, Mohammad Mehdi A Review of Recent Studies on Simulations for Flow around High-Speed Trains [Volume 5, Issue 2, 2019, Pages 311-333]
Rashidi, Mohammad Mehdi Comprehensive Investigating on the Aerodynamic Influences of the Wheel Contact Patch [Volume 6, Issue 4, 2020, Pages 934-955]
Rashidi, Mohammad Mehdi Numerical Simulation of Fuzzy Volterra Integro-differential ‎Equation using Improved Runge-Kutta Method [Volume 9, Issue 1, 2023, Pages 72-82]
Rassoli, Aisa Characterization of the Nonlinear Biaxial Mechanical Behavior ‎of Human Ureter using Constitutive Modeling and Artificial ‎Neural Networks [Volume 8, Issue 4, 2022, Pages 1186-1195]
Rauf, Abdul Electro-magneto-hydrodynamics Flows of Burgers' Fluids in Cylindrical Domains with Time Exponential Memory [Volume 5, Issue 4, 2019, Pages 577-591]
Rauf, Abdul An Analytical and Semi-analytical Study of the Oscillating Flow of Generalized Burgers’ Fluid through a Circular Porous Medium [Volume 5, Issue 5, 2019, Pages 827-839]
Rauf, Abdul Simultaneous Flow of Three Immiscible Fractional Maxwell Fluids ‎with the Clear and Hoamogeneous Porous Cylindrical Domain [Volume 6, Special Issue, 2020, Pages 1324-1334]
Ravanavard, Mehdi Electrochemical and Mechanical Properties of Ni/g-C3N4 ‎Nanocomposite Coatings with Enhanced Corrosion Protective ‎Properties: A Case Study for Modeling the Corrosion Resistance ‎by ANN and ANFIS Models [Volume 9, Issue 3, 2023, Pages 590-606]
Rawani, Mukesh Kumar A Novel Approach to Compute the Numerical Solution of Variable Coefficient Fractional Burgers' Equation with Delay [Volume 7, Issue 3, 2021, Pages 1550-1564]
Rawat, Sawan Kumar Comparative Study of Mixed Convective MHD Cu-Water Nanofluid Flow over a Cone and Wedge using Modified Buongiorno’s Model in Presence of Thermal Radiation and Chemical Reaction via Cattaneo-Christov Double Diffusion Model [Volume 7, Issue 3, 2021, Pages 1383-1402]
Reddy, S.R.R. Numerical Simulations of Unsteady 3D MHD Micropolar Fluid Flow over a Slendering Sheet [Volume 7, Issue 3, 2021, Pages 1403-1412]
Reddy Gorla, Rama Subba Non-linear Radiation and Navier-slip effects on UCM Nanofluid ‎Flow past a Stretching Sheet under Lorentzian Force [Volume 7, Issue 2, 2021, Pages 638-645]
Refahi Oskouei, Amir Accuracy Assessment of Ultrasonic C-scan and X-ray Radiography Methods for Impact Damage Detection in Glass Fiber Reinforced Polyester Composites [Volume 5, Issue 2, 2019, Pages 258-268]
Rehman, Asad A Kinetic Flux-vector Splitting Scheme for Two-layer Shallow Flow Model [Volume 8, Issue 3, 2022, Pages 1043-1053]
Reichl, Katherine K. Temperature Dependent Damping in Additively Manufactured ‎Polymer Structures [Volume 7, Special Issue, 2021, Pages 993-1008]
Reis, Paulo Thermal Behavior of Mesoporous Aramid Fiber Reinforced Silica Aerogel Composite for Thermal Insulation Applications: Microscale Modeling [Volume 10, Issue 1, 2024, Pages 140-151]
Ren, Chuanxin Fatigue Life Analysis of Bus Body based on User Target Load Spectrum‎ [Volume 7, Issue 2, 2021, Pages 965-969]
Renuka, A. Unsteady Separated Stagnation Point Flow of Nanofluid past a ‎Moving Flat Surface in the Presence of Buongiorno's Model [Volume 7, Issue 3, 2021, Pages 1283-1290]
Renuka, P. Slip Effects on Ohmic Dissipative Non-Newtonian Fluid Flow in the Presence of Aligned Magnetic Field [Volume 6, Issue 2, 2020, Pages 296-306]
Reza, Arash A Modified Couple Stress-Based Model for the Nonlinear ‎Vibrational Analysis of Nano-Disks Using Multiple Scales Method [Volume 8, Issue 2, 2022, Pages 580-596]
Rezaei, Dariush Thermal-Hydraulics analysis of pressurized water reactor core by using single heated channel model [Volume 3, Issue 3, 2017, Pages 192-198]
Rezaei, Mehdi Design, Analysis and Manufacturing of a Bone Cutting Ultrasonic Horn-Tool and Verification with Experimental Tests [Volume 8, Issue 2, 2022, Pages 438-447]
Rezaeian Akbarzadeh, Mohsen Stress Intensity Factor Expression for Welded Butt Joint with Undercut and Inclined Lack of Penetration Defects considering the Effect of Joint Shape [Volume 6, Issue 4, 2020, Pages 878-892]
Rezaiee-Pajand, Mohammad On the Geometrically Nonlinear Analysis of Composite Axisymmetric Shells [Volume 4, Special Issue: Applied and Computational Issues in Structural Engineering, 2018, Pages 402-419]
Rhimini, Hassan Comparative Study of the Spectral Method, DISPERSE and Other ‎Classical Methods for Plotting the Dispersion Curves in ‎Anisotropic Plates [Volume 9, Issue 4, 2023, Pages 955-973]
Riaz, Fatima New Exact Traveling Wave Solutions for Fractional Order System ‎Describing the Second Grade Fluid through Medium with Heat ‎Transfer‎ [Volume 7, Issue 2, 2021, Pages 764-781]
Riaz, Muhammad Bilal Role of Magnetic field on the Dynamical Analysis of Second Grade ‎Fluid: An Optimal Solution subject to Non-integer Differentiable ‎Operators [Volume 7, Issue 1, 2021, Pages 54-68]
Riaz, Muhammad Bilal MHD Oldroyd-B Fluid with Slip Condition in view of Local and ‎Nonlocal Kernels [Volume 7, Issue 1, 2021, Pages 116-127]
Riaz, Muhammad Bilal Heat and Mass Transfer of Natural Convective Flow with Slanted ‎Magnetic Field via Fractional Operators [Volume 7, Issue 1, 2021, Pages 189-212]
Riazian, Mehran Scale-Dependent Dynamic Behavior of Nanowire-Based Sensor in Accelerating Field [Volume 5, Issue 2, 2019, Pages 486-497]
Ribeiro, Ricardo F. Damage Identification in a Multi-DOF System under Uncertainties Using Optimization Algorithms [Volume 4, Issue 4, 2018, Pages 365-374]
Ritto, Thiago G. Damage Identification in a Multi-DOF System under Uncertainties Using Optimization Algorithms [Volume 4, Issue 4, 2018, Pages 365-374]
Rizov, Victor Effects of Periodic Loading on Longitudinal Fracture in ‎Viscoelastic Functionally Graded Beam Structures‎ [Volume 8, Issue 1, 2022, Pages 370-378]
Rizov, Victor Delamination Analysis of Multilayered Functionally Graded ‎Beams which Exhibit Non-linear Creep Behavior [Volume 9, Issue 4, 2023, Pages 935-944]
Rocha, Luiz Alberto Oliveira Constructal Design of an Idealize Arterial Bypass Graft: Effect of ‎the Bypass Attachment Pointon Resistance to Flow‎ [Volume 7, Issue 1, 2021, Pages 334-344]
Rocha, Luiz Alberto Oliveira Numerical Study and Geometric Investigation of Corrugated ‎Channels Subjected to Forced Convective Flows [Volume 7, Issue 2, 2021, Pages 727-738]
Rocha, Luiz Alberto Oliveira Applicability Evidence of Constructal Design in Structural ‎Engineering: Case Study of Biaxial Elasto-Plastic Buckling of ‎Square Steel Plates with Elliptical Cutout [Volume 7, Issue 2, 2021, Pages 922-934]
Rocha, Luiz Alberto Oliveira WaveMIMO Methodology: Numerical Wave Generation of a ‎Realistic Sea State‎ [Volume 7, Issue 4, 2021, Pages 2129-2148]
Rodellar, José Predictive Control with Dynamic Hysteresis ‎Reference ‎Trajectory: Application to a Structural Base-‎Isolation ‎Model [Volume 7, Special Issue, 2021, Pages 1242-1251]
Rodrigues, Gonçalo Precision Shape Control of Ultra-thin Shells with Strain Actuators [Volume 7, Special Issue, 2021, Pages 1130-1137]
Roghani, Mehran Elastic Behavior of Functionally Graded Two Tangled Circles Chamber [Volume 5, Issue 4, 2019, Pages 667-679]
Rogolino, P. Analysis of a Hyperbolic Heat Transfer Model in Blood-perfused ‎Biological Tissues with Laser Heating [Volume 8, Issue 4, 2022, Pages 1398-1406]
Rohani, Milad Numerical Simulations of Spoiler’s Effect on a Hatchback and a ‎Sedan Car Exposed to Crosswind Effect‎ [Volume 9, Issue 2, 2023, Pages 346-356]
Rojas, Omar S. A Nonlinear Lagrangian Model for Plane Frames Pre-design [Volume 9, Issue 3, 2023, Pages 884-899]
Rona, Aldo Local Thermal Non-equilibrium Analysis of Cu-Al2O3 Hybrid ‎Nanofluid Natural Convection in a Partially Layered Porous ‎Enclosure with Wavy Walls [Volume 9, Issue 3, 2023, Pages 712-727]
Rosendo, Daniel Effect of Temperature and Moisture on the Impact Behaviour of ‎Adhesive Joints for the Automotive Industry [Volume 7, Issue 3, 2021, Pages 1488-1500]
Rostami, Mohammadreza Nademi MHD Flow and Heat Transfer of SiC-TiO2/DO Hybrid Nanofluid due to a Permeable Spinning Disk by a Novel Algorithm [Volume 5, Issue 5, 2019, Pages 976-988]
Roy, Aritras A Study of Model Separation Flow Behavior at High Angles of Attack Aerodynamics [Volume 4, Issue 4, 2018, Pages 318-330]
Roy, Nepal Chandra Heat Transfer Enhancement and Boundary Layer Separations for ‎a Hybrid Nanofluid Flow past an Isothermal Cylinder [Volume 7, Issue 4, 2021, Pages 2096-2112]
Roy, Nepal Chandra Analysis of Dual Solutions of Unsteady Micropolar Hybrid ‎Nanofluid Flow over a Stretching/Shrinking Sheet [Volume 7, Issue 1, 2021, Pages 19-33]
Roy, S. Magnetized Bi-convective Nanofluid Flow and Entropy ‎Production Using Temperature-sensitive Base Fluid Properties:‎ A Unique Approach [Volume 8, Issue 4, 2022, Pages 1163-1175]
ROY, Sandipan Biomechanical Evaluation of Bone Quality Effect on Stresses at Bone-Implant Interface: A Finite Element Study [Volume 7, Issue 3, 2021, Pages 1266-1275]
Rukavishnikov, Viktor A. Body of Optimal Parameters in the Weighted Finite Element ‎Method for the Crack Problem [Volume 7, Issue 4, 2021, Pages 2159-2170]
Rusta, Mohammad Mahdi Musculoskeletal Modeling and Control of the Human Upper Limb during Manual Wheelchair Propulsion: Application in Functional Electrical Stimulation Rehabilitation Therapy [Volume 10, Issue 1, 2024, Pages 92-110]
Rusyak, Ivan G. Prediction of the Supersonic Flow Base Pressure by Axisymmetric ‎Direct Numerical Simulation [Volume 9, Issue 3, 2023, Pages 739-748]
Ruta, Giuseppe Linear dynamic response of nanobeams accounting for higher gradient effects [Volume 2, Issue 2, 2016, Pages 54-64]

S

Sánchez Lozano, Miguel Mechanical Characterisation and Comparison of Hyperelastic ‎Adhesives: Modelling and Experimental Validation [Volume 8, Issue 1, 2022, Pages 359-369]
Saadatfar, Mahdi Stress Redistribution Analysis of Piezomagnetic Rotating Thick-Walled Cylinder with Temperature-and Moisture-Dependent Material Properties [Volume 6, Issue 1, 2020, Pages 90-104]
Saadatmandi, Abbas Numerical Solution of Time Fractional Cable Equation via the Sinc-Bernoulli Collocation Method [Volume 7, Issue 4, 2021, Pages 1916-1924]
Saberi Varzaneh, Ali Experimental and Finite Element Study to Determine the ‎Mechanical Properties and Bond Between Repair Mortars and ‎Concrete Substrates [Volume 8, Issue 2, 2022, Pages 493-509]
Saber-Samandari, Saeed Nanostructure, Molecular Dynamics Simulation and Mechanical Performance of PCL Membranes Reinforced with Antibacterial Nanoparticles [Volume 7, Issue 4, 2021, Pages 1907-1915]
Sabokrouh, Majid Experimental Study of the Residual Stresses in Girth Weld of Natural Gas Transmission Pipeline [Volume 5, Issue 2, 2019, Pages 199-206]
Sabokrouh, Majid Correlation between the Weld Residual Stresses and its Tensile and Impact Strength [Volume 5, Issue 4, 2019, Pages 727-734]
Sadate Moayeri, Marziye Finite Element Analysis for CFST Columns under Blast Loading [Volume 3, Issue 4, 2017, Pages 283-292]
Sadeghi Toosi, Ershad The Urban Path Routing Adjustable Optimization by Means of Wavelet Transform and Multistage Genetic Algorithm [Volume 5, Issue 4, 2019, Pages 696-703]
Sadig, Hussain Design Optimization and Experimental Validation of Low-Cost ‎Flat Plate Collector Under Central Qasssim Climate [Volume 7, Issue 2, 2021, Pages 811-819]
Sadoun, A. M. Bending, Buckling and Vibration of a Functionally Graded Porous Beam Using Finite Elements [Volume 3, Issue 4, 2017, Pages 274-282]
Sadraee Far, Mohammad Naser Differential Quadrature Method for Dynamic Buckling of Graphene Sheet Coupled by a Viscoelastic Medium Using Neperian Frequency Based on Nonlocal Elasticity Theory [Volume 4, Issue 3, 2018, Pages 147-160]
Saeed, Syed Tauseef Role of Magnetic field on the Dynamical Analysis of Second Grade ‎Fluid: An Optimal Solution subject to Non-integer Differentiable ‎Operators [Volume 7, Issue 1, 2021, Pages 54-68]
Saeed, Syed Tauseef MHD Oldroyd-B Fluid with Slip Condition in view of Local and ‎Nonlocal Kernels [Volume 7, Issue 1, 2021, Pages 116-127]
Sae-Long, Worathep Forced-based Shear-flexure-interaction Frame Element for Nonlinear Analysis of Non-ductile Reinforced Concrete Columns [Volume 6, Special Issue, 2020, Pages 1151-1167]
Sae-Long, Worathep Nonlinear Winkler-based Frame Element with Inclusion of Shear-Flexure Interaction Effect for Analysis of Non-Ductile RC Members on Foundation [Volume 7, Issue 1, 2021, Pages 148-164]
Sae-Long, Worathep Shear-flexure Interaction Frame Model on Kerr-type Foundation ‎for Analysis of Non-ductile RC Members on Foundation [Volume 8, Issue 3, 2022, Pages 1076-1090]
Sae-Long, Worathep Design of Cellular Members under Axial-Shear-Flexure Interaction [(Articles in Press)]
Safarova, Nargiz A. Solution of the Problem of Analytical Construction of Optimal ‎Regulators for a Fractional Order Oscillatory System in the ‎General Case [Volume 7, Issue 2, 2021, Pages 970-976]
Safarova, Nargiz A. Larin Parameterization to Solve the Problem of Analytical ‎Construction of the Optimal Regulator of Oscillatory Systems ‎with Liquid Dampers [Volume 6, Special Issue, 2020, Pages 1426-1430]
Saffarian, Marziyeh Implicit RBF Meshless Method for the Solution of Two-dimensional Variable Order Fractional Cable Equation [Volume 6, Issue 2, 2020, Pages 235-247]
Saffarian, Mohammad Reza Numerical Simulations of Spoiler’s Effect on a Hatchback and a ‎Sedan Car Exposed to Crosswind Effect‎ [Volume 9, Issue 2, 2023, Pages 346-356]
Safieddin Ardebili, Seyed Mohammad Potential of Semi-Empirical Heat Transfer Models in Predicting ‎the Effects of Equivalence Ratio on Low Temperature Reaction ‎and High Temperature Reaction Heat Release of an HCCI Engine [Volume 9, Issue 1, 2023, Pages 45-57]
Sahaya Jenifer, A. Unsteady MHD Mixed Convection Flow of Water over a Sphere ‎with Mass Transfer [Volume 7, Issue 2, 2021, Pages 935-943]
Sahithi, N.S.S. Isogeometric Topology Optimization of Continuum Structures using an Evolutionary Algorithm [Volume 5, Issue 2, 2019, Pages 414-440]
Sahni, Manoj Effect of Magnetic Field on Viscous Flow through Composite ‎Porous Channel using Boundary Element Method [Volume 9, Issue 4, 2023, Pages 1016-1035]
Sahu, Abhishek Transient Response of Longitudinal Fins under Step Changes in ‎Base Temperature and Heat Flux using Lattice Boltzmann ‎Method [Volume 8, Issue 3, 2022, Pages 925-939]
Sahu, Sanjeev A. Scattering and Backscattering Study of Mechanical Plane Wave in Composite Materials Plates (Earth model 1066B and LiNbO3) [Volume 8, Issue 2, 2022, Pages 518-527]
Sahu, S. R. A Parameter Uniform Numerical Scheme for Singularly Perturbed Differential-difference Equations with Mixed Shifts [Volume 6, Issue 2, 2020, Pages 344-356]
Said, Zafar Heat Transfer Improvement in a Thermal Energy Storage System ‎using Auxiliary Fluid Instead of Nano-PCM in an Inclined ‎Enclosure: A Comparative Study [Volume 9, Issue 2, 2023, Pages 475-486]
SAID, MOHAMMED 3D Numerical Investigation of Heat Transfer Performance in Liquid-liquid Taylor Flow [Volume 10, Issue 1, 2024, Pages 183-204]
Saidi, Anouar Thermoelastic Model with Higher-order Time-derivatives and Two Phase-lags for an Infinitely Long Cylinder under Initial Stress and Heat Source [Volume 7, Issue 1, 2021, Pages 277-291]
Saikrishnan, P. Unsteady MHD Mixed Convection Flow of Water over a Sphere ‎with Mass Transfer [Volume 7, Issue 2, 2021, Pages 935-943]
Saim, Rachid Numerical Study on Heat Transfer and Pressure Drop in a Mini-‎Channel with Corrugated Walls‎ [Volume 7, Issue 3, 2021, Pages 1306-1314]
Saim‎, Rachid Numerical Analysis of the Baffles Inclination on Fluid Behavior ‎in a Shell and Tube Heat Exchanger [Volume 7, Issue 1, 2021, Pages 312-320]
Sajjadi, Hasan Effect of Inlet Air Locations on Particle Concentration using ‎Large Eddy Simulation based on Multi Relaxation Time Lattice ‎Boltzmann Method [Volume 7, Issue 4, 2021, Pages 1944-1955]
Sajjadi, Hasan Investigation of Nanoﬂuid Natural Convection Heat Transfer in ‎Open Ended L-shaped Cavities utilizing LBM [Volume 7, Issue 4, 2021, Pages 2064-2083]
Sajjadi, Hasan Optimization of Ventilation Register Locations for Reducing Suspended Particle Concentration Using the Taguchi Method [(Articles in Press)]
Sakhri, Nasreddine Heating Capacity of an Earth to Air Heat Exchanger in Arid Regions - Experimental Investigation [Volume 8, Issue 2, 2022, Pages 429-437]
Salamat, Davood The effect of small scale on the vibrational behavior of single-walled carbon nanotubes with a moving nanoparticle [Volume 3, Issue 3, 2017, Pages 208-217]
Salarkia, Mohammadreza Optimum Design of Liquified Natural Gas Bi-lobe Tanks using Finite Element, Genetic Algorithm and Neural Network [Volume 6, Issue 4, 2020, Pages 862-877]
Salawu, S.O. Inherent Irreversibility of Exothermic Chemical Reactive Third-Grade Poiseuille Flow of a Variable Viscosity with Convective Cooling [Volume 4, Issue 3, 2018, Pages 167-174]
Salawu, Sulyman Olakunle Analysis of Entropy Generation in Hydromagnetic Micropolar Fluid Flow over an Inclined Nonlinear Permeable Stretching Sheet with Variable Viscosity [Volume 6, Special Issue, 2020, Pages 1301-1313]
Salehzadeh Nobari, Ali Helicopter Blade Stability Analysis Using Aeroelastic Frequency Response Functions [Volume 1, Issue 3, 2015, Pages 152-160]
Salhi, Najim Random Walk Particle Tracking for Convection-diffusion ‎Dominated Problems in Shallow Water Flows [Volume 7, Issue 2, 2021, Pages 486-495]
Sallah, Mohammed Theoretical Analysis of the Motorcycle Front Brake Heating ‎Process during High Initial Speed Emergency Braking [Volume 6, Special Issue, 2020, Pages 1431-1437]
Salman, Sanaa Moussa On the Dynamics of the Logistic Delay Differential Equation with ‎Two Different Delays [Volume 7, Issue 2, 2021, Pages 442-449]
Salmi, Houda Numerical Analysis of the Effect of External Circumferential Elliptical Cracks in Transition Thickness Zone of Pressurized Pipes Using XFEM [Volume 5, Issue 5, 2019, Pages 861-874]
Salmon, Sébastien Performance measure and tool for benchmarking metaheuristic optimization algorithms [Volume 7, Issue 3, 2021, Pages 1803-1813]
Samad, Abdul Meshfree Collocation Method for the Numerical Solution of ‎Higher Order KdV Equation [Volume 7, Issue 2, 2021, Pages 422-431]
Samad, Abdul Applications of Higher-Order Derivatives to the Subclasses of ‎Meromorphic Starlike Functions [Volume 7, Issue 1, 2021, Pages 321-333]
Samad, Abdul On Integrability up to the Boundary of the Weak Solutions to a ‎Class of non-Newtonian Compressible Fluids with Vacuum [Volume 7, Issue 3, 2021, Pages 1527-1536]
Samarikhalaj, Hojjat Experimental Investigation and Optimizing Geometrical Characteristics and Surface Quality in Drilling of AISI H13 Steel [Volume 6, Issue 2, 2020, Pages 332-343]
Sandilo, Sajad H. Asymptotic Approximations of the Solution for a Traveling String under Boundary Damping [Volume 5, Issue 5, 2019, Pages 918-925]
Sankar, D.S. Mathematical Analysis of Poiseuille Flow of Casson Fluid past Porous Medium [Volume 8, Issue 2, 2022, Pages 456-474]
Sankar, D.S. Theoretical Study on Poiseuille Flow of Herschel-Bulkley Fluid in ‎Porous Media‎ [Volume 8, Issue 4, 2022, Pages 1246-1269]
Sannyal, Mridul Numerical Investigation of Tissue-Temperature Controlled ‎System in Thermal Ablation: A Finite Element Approach [Volume 7, Issue 3, 2021, Pages 1826-1835]
Sapountzaki, Olga E. Beam & Shell Models for Composite Straight or Curved Bridge Decks with Intermediate Diaphragms & Assessment of Design Specifications [Volume 5, Issue 5, 2019, Pages 998-1022]
Sapountzakis, Evangelos Generalized Warping In Flexural-Torsional Buckling Analysis of Composite Beams [Volume 2, Issue 3, 2016, Pages 152-173]
Sarafraz, Amir Ashkan Shape and geometrical parameter effects of a bimorph piezoelectric beam on energy harvesting performance [Volume 3, Issue 2, 2017, Pages 92-102]
Saranya, S. Three Dimensional Non-linear Radiative Nanofluid Flow over a Riga Plate [Volume 6, Issue 4, 2020, Pages 1012-1029]
Sarego, Giulia A Stress Tensor-based Failure Criterion for Ordinary State-based ‎Peridynamic Models‎ [Volume 8, Issue 2, 2022, Pages 617-628]
Sari, Zaki Reducing Retrieval Time in Automated Storage and Retrieval System with a Gravitational Conveyor Based on Multi-Agent Systems [Volume 4, Issue 1, 2018, Pages 55-68]
Saria, Abdellali Numerical Study of the Dynamic Response of Elevated Steel ‎Conical Tank under Vertical Seismic Excitation - Case Study [Volume 9, Issue 2, 2023, Pages 445-457]
Sarkar, Subharthi Study of MHD Second Grade Flow through a Porous Microchannel under the Dual-Phase-Lag Heat and Mass Transfer Model [Volume 5, Issue 4, 2019, Pages 763-778]
Sarker, M.M.A. - Heat Transport Exploration of Free Convection Flow inside ‎Enclosure Having Vertical Wavy Walls [Volume 7, Issue 2, 2021, Pages 520-527]
Sarma, Tushar Pratim A Study of Model Separation Flow Behavior at High Angles of Attack Aerodynamics [Volume 4, Issue 4, 2018, Pages 318-330]
Sarojamma, G. Variable Thermal Conductivity and Thermal Radiation Effect on the Motion of a Micro Polar Fluid over an Upper Surface [Volume 5, Issue 2, 2019, Pages 441-453]
Sarojamma, G. Exploration of the Significance of Autocatalytic Chemical Reaction and Cattaneo-Christov Heat Flux on the Dynamics of a Micropolar Fluid [Volume 6, Issue 1, 2020, Pages 77-89]
Satheesh Kumar, B. Experimental Investigation on Radial Ball Bearing Parameters Using Taguchi Method [Volume 4, Issue 1, 2018, Pages 69-74]
Sathiyamoorthi, Arun MHD Double-Diffusive Natural Convection in a Closed Space ‎Filled with Liquid Metal: Mesoscopic Analysis [Volume 7, Issue 3, 2021, Pages 1448-1465]
Satya Narayana, P.V. Variable Thermal Conductivity and Thermal Radiation Effect on the Motion of a Micro Polar Fluid over an Upper Surface [Volume 5, Issue 2, 2019, Pages 441-453]
Satya Narayana, P.V. Melting Heat Transfer and Radiation Effects on Jeffrey Fluid Flow over a Continuously Moving Surface with a Parallel Free Stream [Volume 5, Issue 2, 2019, Pages 468-476]
Satya Narayana, P.V. Micropolar Fluid Flow Induced due to a Stretching Sheet with Heat Source/Sink and Surface Heat Flux Boundary Condition Effects [Volume 5, Issue 5, 2019, Pages 816-826]
Satya Narayana, P.V. Chemical Reaction Effects on Bio-Convection Nanofluid flow between two Parallel Plates in Rotating System with Variable Viscosity: A Numerical Study [Volume 5, Issue 4, 2019, Pages 791-803]
Satya Narayana, P.V. Exploration of the Significance of Autocatalytic Chemical Reaction and Cattaneo-Christov Heat Flux on the Dynamics of a Micropolar Fluid [Volume 6, Issue 1, 2020, Pages 77-89]
Sauvage, Jean-Baptiste Using the Finite Element Analysis Method to Study the 3-point Bending Test for the Characterization of the Adherence [Volume 6, Issue 3, 2020, Pages 505-516]
Savino, Pierclaudio Two-node Curved Inverse Finite Element Formulations based on ‎Exact Strain-displacement Solution [Volume 9, Issue 1, 2023, Pages 259-273]
Saw, Lip Huat Thermomechanical Stresses of Multilayered Wellbore Structure ‎of Underground Hydrogen Storage – A Simplified Solution Based ‎on Recursive Algorithm [Volume 8, Issue 4, 2022, Pages 1287-1298]
Sayyad, Atteshamuddin Bending of Shear Deformable Plates Resting on Winkler Foundations According to Trigonometric Plate Theory [Volume 4, Issue 3, 2018, Pages 187-201]
Sayyad, Atteshamuddin A New Quasi-3D Model for Functionally Graded Plates [Volume 5, Issue 2, 2019, Pages 367-380]
Schoeftner, Juergen Stress Control of a Piezoelectric Lumped-element Model − ‎Theoretical Investigation and Experimental Realization [Volume 7, Special Issue, 2021, Pages 1110-1120]
Schott, François Performance measure and tool for benchmarking metaheuristic optimization algorithms [Volume 7, Issue 3, 2021, Pages 1803-1813]
Schramm, Alexander Multibody Efficiency Analysis of Chain Drives in Racing Motorcycles [Volume 8, Issue 3, 2022, Pages 1091-1102]
Schramm, Alexander E. Driveline Stability in Racing Motorcycles: Analysis of a Three ‎Degrees of Freedom Minimal Model [Volume 9, Issue 2, 2023, Pages 404-418]
Seangwong, Pattasad Design of Doubly Salient Permanent Magnet Generator for ‎Output Power Enhancement using Structural Modification [Volume 7, Issue 4, 2021, Pages 2171-2178]
Seba, Djamila Solving Duffing-Van der Pol Oscillator Equations of Fractional ‎Order by an Accurate Technique [Volume 7, Issue 3, 2021, Pages 1480-1487]
Sedighi, Hamid M. Nonlinear transversely vibrating beams by the homotopy perturbation method with an auxiliary term [Volume 1, Issue 1, 2015, Pages 1-9]
Sedighi, Hamid M. The effect of small scale on the vibrational behavior of single-walled carbon nanotubes with a moving nanoparticle [Volume 3, Issue 3, 2017, Pages 208-217]
Sedighi, Kurosh Investigation of Visco-rheological Properties of Polymeric Fluid on Electrothermal Pumping [Volume 10, Issue 1, 2024, Pages 164-182]
Selvan, Muthtamil Impact of Magnetic Field on Convective Flow of a Micropolar Fluid with two Parallel Heat Source [Volume 5, Issue 4, 2019, Pages 652-666]
Semenov, Alexey Buckling of Shell Panels Made of Fiberglass and Reinforced with ‎an Orthogonal Grid of Stiffeners [Volume 7, Issue 3, 2021, Pages 1856-1861]
Semenov, Alexey Strength of Steel Shell Cylindrical Panels Reinforced with an ‎Orthogonal Grid of Stiffeners [Volume 8, Issue 2, 2022, Pages 723-732]
Semenov, Alexey Dynamic Buckling of Stiffened Shell Structures with Transverse ‎Shears under Linearly Increasing Load [Volume 8, Issue 4, 2022, Pages 1343-1357]
Semenov, Alexey Influence of Discretely Introduced Cutouts on the Buckling of Shallow Shells with Double Curvature [Volume 10, Issue 1, 2024, Pages 55-63]
Sener, Bora Description of Anomalous Behavior of Aluminum Alloys with ‎Hill48 Yield Criterion by Using Different Experimental Inputs ‎and Weight Coefficients [Volume 7, Issue 3, 2021, Pages 1606-1619]
Serilko, Dmytro The Dynamics of the Working Body of the Tubular Conveyor with ‎the Chain Drive [Volume 7, Issue 3, 2021, Pages 1710-1718]
Serilko, Leonid The Dynamics of the Working Body of the Tubular Conveyor with ‎the Chain Drive [Volume 7, Issue 3, 2021, Pages 1710-1718]
Setoudeh, Farbod A Deep Learning Approach to Predict the Flow Field and Thermal ‎Patterns of Nonencapsulated Phase Change Materials ‎Suspensions in an Enclosure‎ [Volume 8, Issue 4, 2022, Pages 1270-1278]
Seyed Roknizadeh, Alireza Helicopter Blade Stability Analysis Using Aeroelastic Frequency Response Functions [Volume 1, Issue 3, 2015, Pages 152-160]
Seyed Roknizadeh, Seyed Alireza Shape and geometrical parameter effects of a bimorph piezoelectric beam on energy harvesting performance [Volume 3, Issue 2, 2017, Pages 92-102]
Seyed Roknizadeh, Seyed Alireza Clogged Impeller Diagnosis in the Centrifugal Pump Using the Vibration and Motor Current Analysis [Volume 4, Issue 4, 2018, Pages 310-317]
Seyfi, Behzad Characterization of the Nonlinear Biaxial Mechanical Behavior ‎of Human Ureter using Constitutive Modeling and Artificial ‎Neural Networks [Volume 8, Issue 4, 2022, Pages 1186-1195]
Seyyedi, Seyyed Masoud Viscous Dissipation Impact on Free Convection Flow of Cu-water Nanofluid in a Circular Enclosure with Porosity Considering Internal Heat Source [Volume 5, Issue 4, 2019, Pages 717-726]
Shabani, Shkelzen Free Vibration Analysis of Functionally Graded Beams with Cracks [Volume 6, Issue 4, 2020, Pages 908-919]
Shabarov, Vasiliy Method of Unsteady Hydrodynamic Characteristics ‎Determination in Turbulent Boundary Layer [Volume 7, Issue 2, 2021, Pages 849-857]
Shabgard, Mohammad Reza Experimental Study on the Surface Modification by Electrical Discharge Process [Volume 5, Issue 2, 2019, Pages 249-257]
Shafaghat, Rouzbeh Numerical Study of the Hydrodynamic Behavior of an Archimedes Screw Turbine by Experimental Data in order to Optimize Turbine Performance: The Genetic Algorithm [Volume 9, Issue 4, 2023, Pages 1060-1075]
Shafie, Sharidan Mathematical Modelling of MHD Blood Flow with Gold Nanoparticles in Slip Small Arteries [Volume 10, Issue 1, 2024, Pages 125-139]
Shafii, Mohammad Behshad Numerical Study on the Ferrofluid Droplet Splitting in a T-junction ‎with Branches of Unequal Widths using Asymmetric Magnetic Field‎ [Volume 9, Issue 2, 2023, Pages 357-370]
Shah, Kamal Numerical Simulation of Fuzzy Volterra Integro-differential ‎Equation using Improved Runge-Kutta Method [Volume 9, Issue 1, 2023, Pages 72-82]
Shah, Nehad Ali Transient Electro-osmotic Slip Flow of an Oldroyd-B Fluid with Time-fractional Caputo-Fabrizio Derivative [Volume 5, Issue 4, 2019, Pages 779-790]
Shah, Syed Inayat Transient MHD Convective Flow of Fractional Nanofluid between Vertical Plates [Volume 5, Issue 4, 2019, Pages 592-602]
Shahabi, Mehdi Springback Modeling in L-bending Process Using Continuum Damage Mechanics Concept [Volume 1, Issue 3, 2015, Pages 161-167]
Shahani, Amir Reza Numerical and Experimental Investigation on Post-buckling ‎Behavior of Stiffened Cylindrical Shells with Cutout subject to ‎Uniform Axial Compression [Volume 9, Issue 1, 2023, Pages 25-44]
Shahidi, Ali Reza Size-dependent free vibration analysis of rectangular nanoplates with the consideration of surface effects using finite difference method [Volume 1, Issue 3, 2015, Pages 122-133]
Shahmansoorian, Aref Chaos Control in Gear Transmission System using GPC and SMC ‎Controllers [Volume 8, Issue 2, 2022, Pages 545-556]
Shahrooi, Shahram Analysis of Axisymmetric Vibration of Functionally-Graded ‎Circular Nano-Plate Based on the Integral Form of the Strain ‎Gradient Model [Volume 7, Issue 4, 2021, Pages 2196-2220]
Shahrooi, Shahram A Modified Couple Stress-Based Model for the Nonlinear ‎Vibrational Analysis of Nano-Disks Using Multiple Scales Method [Volume 8, Issue 2, 2022, Pages 580-596]
Shaklein, Artem A. Prediction of the Supersonic Flow Base Pressure by Axisymmetric ‎Direct Numerical Simulation [Volume 9, Issue 3, 2023, Pages 739-748]
Shalaby, Rizk M. Theoretical Analysis of the Motorcycle Front Brake Heating ‎Process during High Initial Speed Emergency Braking [Volume 6, Special Issue, 2020, Pages 1431-1437]
Shams, Shahrokh Torsional Aeroelasticity of a Flexible VAWT Blade using a Combined Aerodynamic Method by Considering Post-stall and Local Reynolds Regime [Volume 6, Issue 4, 2020, Pages 757-776]
Shamshuddin, MD Micropolar Fluid Flow Induced due to a Stretching Sheet with Heat Source/Sink and Surface Heat Flux Boundary Condition Effects [Volume 5, Issue 5, 2019, Pages 816-826]
Shanab, Rabab A. Static Buckling of 2D FG Porous Plates Resting on Elastic ‎Foundation based on Unified Shear Theories‎ [Volume 9, Issue 1, 2023, Pages 239-258]
Shaposhnikov, Vitaliy Method of Unsteady Hydrodynamic Characteristics ‎Determination in Turbulent Boundary Layer [Volume 7, Issue 2, 2021, Pages 849-857]
Shariati, Mojtaba Nonlocal Elasticity Effect on Linear Vibration of Nano-circular Plate Using Adomian Decomposition Method [Volume 6, Issue 1, 2020, Pages 63-76]
Shariati, Mojtaba Size Effect on the Axisymmetric Vibrational Response of ‎Functionally Graded Circular Nano-Plate Based on the Nonlocal Stress-Driven Method [Volume 8, Issue 3, 2022, Pages 962-980]
Shariati, Mojtaba Stress-driven Approach to Vibrational Analysis of FGM Annular ‎Nano-plate based on First-order Shear Deformation Plate Theory [Volume 9, Issue 3, 2023, Pages 637-655]
Shariff, M.H.B.M. Finite Deformations of Fibre-reinforced Elastic Solids with ‎Fibre Bending Stiffness: A Spectral Approach [Volume 8, Issue 4, 2022, Pages 1332-1342]
Sharifi Teshnizi, Ebrahim Analytical Solutions and Analyses of the Displacement ‎Separating Point in Diffusers [Volume 8, Issue 3, 2022, Pages 891-903]
Sharif Zarei, Mohammd Dynamic Buckling of Embedded Laminated Nanocomposite Plates Based on Sinusoidal Shear Deformation Theory [Volume 2, Issue 4, 2016, Pages 254-261]
Sharma, Ram Prakash MHD Non-Newtonian Fluid Flow past a Stretching Sheet under ‎the Influence of Non-linear Radiation and Viscous Dissipation [Volume 8, Issue 3, 2022, Pages 949-961]
Sharma, R.P. Metal and Metallic Oxide Nanofluid over a Shrinking Surface with ‎Thermal Radiation and Heat Generation/Absorption [Volume 8, Issue 2, 2022, Pages 557-565]
Shashi Prabha Gogate, S. Numerical Study of Three-dimensional Boundary-layer Flow over ‎a Wedge: Magnetic Field Analysis [Volume 8, Issue 3, 2022, Pages 876-890]
Shaw, Sachin MHD Non-Newtonian Fluid Flow past a Stretching Sheet under ‎the Influence of Non-linear Radiation and Viscous Dissipation [Volume 8, Issue 3, 2022, Pages 949-961]
Shekar, M. Free Convection Flow of an Electrically-Conducting Micropolar Fluid between Parallel Porous Vertical Plates Using Differential Transform [Volume 4, Issue 4, 2018, Pages 286-298]
Shen, Z.B. Semi-Analytical Solution for Vibration of Nonlocal Piezoelectric Kirchhoff Plates Resting on Viscoelastic Foundation [Volume 4, Issue 3, 2018, Pages 202-215]
Sheremet, Mikhail A. Influence of Thermal Radiation on Heat Transfer through a ‎Hollow Block [Volume 9, Issue 2, 2023, Pages 419-429]
Sheremet, Mikhail A. Effect of Thermal Conductivity and Emissivity of Solid Walls on Time-Dependent Turbulent Conjugate Convective-Radiative Heat Transfer [Volume 5, Issue 2, 2019, Pages 207-216]
Sheremet, Mikhail A. The Brick Thermal Performance Improvement using Phase ‎Change Materials [Volume 6, Special Issue, 2020, Pages 1283-1292]
Shi, Zhifei A Simplified Analytical Method for Detuning Periodic Pile Barriers [Volume 8, Issue 4, 2022, Pages 1480-1487]
Shimanovskiy, Vladimir Matrix Equations of the Motion of Multibody Systems with a Tree Structure in Hamiltonian Variables [Volume 9, Issue 4, 2023, Pages 1107-1121]
Shimpi, R.P. Simple Two Variable Refined Theory for Shear Deformable Isotropic Rectangular Beams [Volume 6, Issue 3, 2020, Pages 394-415]
Shiravi, Amir Hossein Thermodynamic and Environmental Assessment of Mounting Fin ‎at the Back Surface of Photovoltaic Panels [Volume 7, Issue 4, 2021, Pages 1956-1963]
Shishehsaz, Mohammad Stress-driven Approach to Vibrational Analysis of FGM Annular ‎Nano-plate based on First-order Shear Deformation Plate Theory [Volume 9, Issue 3, 2023, Pages 637-655]
Shishesaz, Mohammad Nonlocal Elasticity Effect on Linear Vibration of Nano-circular Plate Using Adomian Decomposition Method [Volume 6, Issue 1, 2020, Pages 63-76]
Shishesaz, Mohammad Analysis of Axisymmetric Vibration of Functionally-Graded ‎Circular Nano-Plate Based on the Integral Form of the Strain ‎Gradient Model [Volume 7, Issue 4, 2021, Pages 2196-2220]
Shishesaz, Mohammad A Modified Couple Stress-Based Model for the Nonlinear ‎Vibrational Analysis of Nano-Disks Using Multiple Scales Method [Volume 8, Issue 2, 2022, Pages 580-596]
Shishesaz, Mohammad Size Effect on the Axisymmetric Vibrational Response of ‎Functionally Graded Circular Nano-Plate Based on the Nonlocal Stress-Driven Method [Volume 8, Issue 3, 2022, Pages 962-980]
Shishesaz, Mohammad Reza Electrochemical and Mechanical Properties of Ni/g-C3N4 ‎Nanocomposite Coatings with Enhanced Corrosion Protective ‎Properties: A Case Study for Modeling the Corrosion Resistance ‎by ANN and ANFIS Models [Volume 9, Issue 3, 2023, Pages 590-606]
Shmatko, Tetyana Analysis of Free Vibration of Porous Power-law and Sigmoid Functionally Graded Sandwich Plates by the R-functions Method [Volume 9, Issue 4, 2023, Pages 1144-1155]
Shojaee, Saeed Time-Discontinuous Finite Element Analysis of Two-Dimensional Elastodynamic Problems using Complex Fourier Shape Functions [Volume 4, Special Issue: Applied and Computational Issues in Structural Engineering, 2018, Pages 442-456]
Shojaee, Saeed Improvement of Numerical Manifold Method using Nine-node ‎Quadrilateral and Ten-node Triangular Elements along with ‎Complex Fourier RBFs in Modeling Free and Forced Vibrations [Volume 7, Issue 4, 2021, Pages 2049-2063]
Shojaee, Taghi Uniaxial Buckling Analysis Comparison of Nanoplate and Nanocomposite Plate with Central Square Cut out Using Domain Decomposition Method [Volume 2, Issue 4, 2016, Pages 230-242]
Shojaei, Arman A Stress Tensor-based Failure Criterion for Ordinary State-based ‎Peridynamic Models‎ [Volume 8, Issue 2, 2022, Pages 617-628]
Shokrani, Mohammad Hossein Size-dependent free vibration analysis of rectangular nanoplates with the consideration of surface effects using finite difference method [Volume 1, Issue 3, 2015, Pages 122-133]
Shokri, Ali Dynamically Consistent NSFD Methods for Predator-prey System [Volume 7, Issue 3, 2021, Pages 1565-1574]
Shokri, Ali Nonstandard Dynamically Consistent Numerical Methods for ‎MSEIR Model [Volume 8, Issue 1, 2022, Pages 196-205]
Shokrian, Mostafa Fuzzy Modeling and Synchronization of a New Hyperchaotic Complex System with Uncertainties [Volume 1, Issue 3, 2015, Pages 134-144]
Shrager, Gennady R. Flow Structure when Filling a Channel with a Curable Liquid [Volume 9, Issue 1, 2023, Pages 195-204]
Shrama, Kadhum On the Use of Acoustic Emission and Digital Image Correlation for Welded Joints Damage Characterization [Volume 5, Issue 2, 2019, Pages 381-389]
Shu, Yupeng Traveling Waves of Some Symmetric Planar Flows of Non-Newtonian Fluids [Volume 5, Issue 2, 2019, Pages 344-354]
Shukla, Nisha Non-similar Radiative Bioconvection Nanofluid Flow under ‎Oblique Magnetic Field with Entropy Generation‎ [Volume 8, Issue 1, 2022, Pages 206-218]
Shyamsunder, J. Experimental Investigation on Radial Ball Bearing Parameters Using Taguchi Method [Volume 4, Issue 1, 2018, Pages 69-74]
Sibanda, Precious Entropy Generation of Variable Viscosity and Thermal Radiation on Magneto Nanofluid Flow with Dusty Fluid [Volume 6, Issue 1, 2020, Pages 171-182]
Sibanda, Precious Effect of Cattaneo-Christov Heat Flux on Radiative ‎Hydromagnetic Nanofluid Flow between Parallel Plates using ‎Spectral Quasilinearization Method [Volume 8, Issue 3, 2022, Pages 865-875]
Siddique, Imran MHD Oldroyd-B Fluid with Slip Condition in view of Local and ‎Nonlocal Kernels [Volume 7, Issue 1, 2021, Pages 116-127]
Siddiqui, Abdul Majeed Unsteady Stokes Flow through a Porous Pipe with Periodic Suction and Injection with Slip Conditions [Volume 6, Special Issue, 2020, Pages 1168-1177]
Sikandar, Waseem Jeffery Hamel Flow of a non-Newtonian Fluid [Volume 2, Issue 1, 2016, Pages 21-28]
Sim, Lih Chi Thermomechanical Stresses of Multilayered Wellbore Structure ‎of Underground Hydrogen Storage – A Simplified Solution Based ‎on Recursive Algorithm [Volume 8, Issue 4, 2022, Pages 1287-1298]
Simelane, Simphiwe An Efficient Spectral Method-based Algorithm for Solving a ‎High-dimensional Chaotic Lorenz System [Volume 7, Issue 1, 2021, Pages 225-234]
Simon Portillo, Francisco J. Mechanical Characterisation and Comparison of Hyperelastic ‎Adhesives: Modelling and Experimental Validation [Volume 8, Issue 1, 2022, Pages 359-369]
Sims, Neil Direct Normal Form Analysis of Oscillators with Different ‎Combinations of Geometric Nonlinear Stiffness Terms [Volume 7, Special Issue, 2021, Pages 1167-1182]
Singhal, Abhinav Mechanics of 2D Elastic Stress Waves Propagation Impacted by Concentrated Point Source Disturbance in Composite Material Bars [Volume 6, Issue 4, 2020, Pages 788-800]
Singhal, Abhinav Scattering and Backscattering Study of Mechanical Plane Wave in Composite Materials Plates (Earth model 1066B and LiNbO3) [Volume 8, Issue 2, 2022, Pages 518-527]
Siokas, Antonis G. Nonlinear Buckling and Post-buckling of Shape Memory Alloy Shallow Arches [Volume 6, Issue 3, 2020, Pages 665-683]
Siritaratiwat, Apirat Design of Doubly Salient Permanent Magnet Generator for ‎Output Power Enhancement using Structural Modification [Volume 7, Issue 4, 2021, Pages 2171-2178]
Siriyothai, Patcharakon A Study of Curved Louver Fin Configuration for ‎Heat Transfer Enhancement [Volume 8, Issue 2, 2022, Pages 754-763]
Sivaraj, R. Stability Analysis of Casson Nanofluid Flow over an Extending/Contracting ‎Wedge and Stagnation Point [Volume 8, Issue 2, 2022, Pages 566-579]
Skrzypacz, Piotr Sebastian A Variational Principle for a Nonlinear Oscillator Arising in the ‎Microelectromechanical System [Volume 7, Issue 1, 2021, Pages 78-83]
Sobamowo, Gbeminiyi Nonlinear Vibration Analysis of Single-Walled Carbon Nanotube Conveying Fluid in Slip Boundary Conditions Using Variational Iterative Method [Volume 2, Issue 4, 2016, Pages 208-221]
Sobamowo, Gbeminiyi M Thermo-mechanical nonlinear vibration analysis of fluid-conveying structures subjected to different boundary conditions using Galerkin-Newton-Harmonic balancing method [Volume 3, Issue 1, 2017, Pages 60-79]
Sobamowo, Gbeminiyi Multi-boiling Heat Transfer Analysis of a Convective Straight Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 3, Issue 4, 2017, Pages 229-239]
Sobamowo, Gbeminiyi M Perturbation Solutions for the Study of MHD Blood as a Third Grade Nanofluid Transporting Gold Nanoparticles through a Porous Channel [Volume 3, Issue 2, 2017, Pages 103-113]
Sobamowo, Gbeminiyi Free Convection Flow and Heat Transfer of Nanofluids of Different Shapes of Nano-Sized Particles over a Vertical Plate at Low and High Prandtl Numbers [Volume 5, Issue 1, 2019, Pages 13-39]
Sobamowo, Gbeminiyi Thermal Analysis of Radiating Film Flow of Sodium Alginate ‎using MWCNT Nanoparticles ‎ [Volume 8, Issue 1, 2022, Pages 219-231]
Sobamowo, Gbeminiyi M. Combined Impacts of Fin Surface Inclination and ‎Magnetohydrodynamics on the Thermal Performance of a Convective-Radiative Porous Fin‎ [Volume 8, Issue 3, 2022, Pages 940-948]
Sodagar, Sina Investigation on the Crack Effect in the Cylinder and Matrix on the Backscattering Field Frequency Specifications using the Finite Element Method [Volume 8, Issue 2, 2022, Pages 448-455]
Soe-Knudsen, Alf Wave Motion and Stop-Bands in Pipes with Helical Characteristics Using Wave Finite Element Analysis [Volume 4, Special Issue: Applied and Computational Issues in Structural Engineering, 2018, Pages 420-428]
Sofiyev, Abdullah H. Buckling Analysis of Functionally Graded Shells under Mixed ‎Boundary ‎Conditions Subjected to Uniform Lateral Pressure [Volume 7, Issue 1, 2021, Pages 345-354]
Sofiyev, Abdullah‎ H.‎ Buckling Behavior of Nanocomposite Plates with Functionally ‎Graded Properties under Compressive Loads in Elastic and ‎Thermal Environments [Volume 9, Issue 4, 2023, Pages 974-986]
Sokil, Bogdan The Dynamics of the Working Body of the Tubular Conveyor with ‎the Chain Drive [Volume 7, Issue 3, 2021, Pages 1710-1718]
Soleiman, Amr Thermoelastic Vibrations of Nonlocal Nanobeams Resting on a ‎Pasternak Foundation via DPL Model [Volume 7, Issue 1, 2021, Pages 34-44]
Solmaz, Hamit Potential of Semi-Empirical Heat Transfer Models in Predicting ‎the Effects of Equivalence Ratio on Low Temperature Reaction ‎and High Temperature Reaction Heat Release of an HCCI Engine [Volume 9, Issue 1, 2023, Pages 45-57]
Soloviev, Arcady Multilevel Modeling of 1-3 Piezoelectric Energy Harvester Based ‎on Porous Piezoceramics [Volume 9, Issue 3, 2023, Pages 763-774]
Soomro, Zulfiqar Ali Computation of Slip analysis to detect adhesion for protection of rail vehicle and derailment [Volume 1, Issue 3, 2015, Pages 145-151]
Sorokin, Sergey Wave Motion and Stop-Bands in Pipes with Helical Characteristics Using Wave Finite Element Analysis [Volume 4, Special Issue: Applied and Computational Issues in Structural Engineering, 2018, Pages 420-428]
Soroush, Rahman Modeling of the intermolecular Force-Induced Adhesion in Freestanding Nanostructures Made of Nano-beams [Volume 2, Issue 1, 2016, Pages 1-7]
Soroush, Rahman Investigation of the vdW Force-Induced Instability in Nano-scale Actuators Fabricated form Cylindrical Nanowires [Volume 2, Issue 1, 2016, Pages 8-20]
Soroush, Rahman Electromechanical Performance of NEMS Actuator Fabricated from Nanowire under quantum vacuum fluctuations using GDQ and MVIM [Volume 3, Issue 2, 2017, Pages 125-134]
Soroushian, Aram A General Rule for the Influence of Physical Damping on the Numerical Stability of Time Integration Analysis [Volume 4, Special Issue: Applied and Computational Issues in Structural Engineering, 2018, Pages 467-481]
Soroushian, Aram Experimental and Numerical Investigations on the Effect of Rectangular Openings’ Aspect Ratio on Outflow Discharge [Volume 4, Special Issue: Applied and Computational Issues in Structural Engineering, 2018, Pages 457-466]
Soroushian, Aram Preface [Volume 4, Special Issue: Applied and Computational Issues in Structural Engineering, 2018]
Soroushian, Aram Reduction in Space for Dynamic Finite Element Analysis of Assemblies of Beam-columns when the Mass is Available in Digitized Format [Volume 8, Issue 1, 2022, Pages 71-83]
Sorrentino, Silvio Stability Analysis of Articulated Bus in Straight-ahead Running Manoeuvre [Volume 7, Issue 3, 2021, Pages 1649-1662]
Sorrentino, Silvio Driveline Stability in Racing Motorcycles: Analysis of a Three ‎Degrees of Freedom Minimal Model [Volume 9, Issue 2, 2023, Pages 404-418]
Soufivand, Mohammad Reza An Experimental Comparison between Wing Root and Wingtip ‎Corrugation Patterns of Dragonfly Wing at Ultra-low Reynolds ‎Number and High Angles of Attack‎ [Volume 8, Issue 4, 2022, Pages 1176-1185]
Soulis, Johannes V. Explicit and Implicit Finite -Volume Methods for Depth Averaged Free-Surface Flows [Volume 6, Special Issue, 2020, Pages 1270-1282]
Souza Santana, Hilton Marques Analysis of High-order Approximations by Spectral Interpolation Applied to One- and Two-dimensional Finite Element Method [Volume 6, Issue 1, 2020, Pages 145-159]
Spencer Jr., Billie F. Validation of Model-Based Real-Time Hybrid Simulation for a Lightly-Damped and Highly-Nonlinear Structural System [Volume 7, Special Issue, 2021, Pages 1252-1265]
Spitas, Christos Structural and Aerodynamical Parametric Study of Truss-Core ‎Gas Turbine Rotor Blade [Volume 7, Issue 2, 2021, Pages 831-838]
Spitas, Christos Finite Element Modelling and Simulation of the Hysteretic ‎Behaviour of Single- and Bi-metal Cantilever Beams using a ‎Modified Non-linear Beta-damping Model [Volume 7, Issue 3, 2021, Pages 1663-1675]
Sreedhar Sarma, G. MHD Casson Nanofluid Past a Stretching Sheet with the Effects of Viscous Dissipation, Chemical Reaction and Heat Source/Sink [Volume 7, Issue 4, 2021, Pages 2040-2048]
Sreenivasulu, P. Non-linear Radiation and Navier-slip effects on UCM Nanofluid ‎Flow past a Stretching Sheet under Lorentzian Force [Volume 7, Issue 2, 2021, Pages 638-645]
Srikanth, D. Impact of Blood Vessel Wall Flexibility on the Temperature and Concentration Dispersion [Volume 6, Issue 3, 2020, Pages 564-581]
Srinivas, S. Mathematical Model of Fluid Flow and Solute Transport in ‎Converging-diverging Permeable Tubes [Volume 9, Issue 4, 2023, Pages 900-914]
Srinivas, Suripeddi Unsteady Hydromagnetic Flow of Eyring-Powell Nanofluid over an Inclined Permeable Stretching Sheet with Joule Heating and Thermal Radiation [Volume 6, Issue 2, 2020, Pages 259-270]
Srivastava, Hari Mohan Applications of Higher-Order Derivatives to the Subclasses of ‎Meromorphic Starlike Functions [Volume 7, Issue 1, 2021, Pages 321-333]
Srivastava, Prakash C. Numerical Scheme based on Non-polynomial Spline Functions for ‎the System of Second Order Boundary Value Problems arising in ‎Various Engineering Applications [Volume 8, Issue 1, 2022, Pages 144-152]
Srivastava, Sangeet Magneto-bio-thermal Convection in Rotating Nanoliquid ‎containing Gyrotactic Microorganism [Volume 7, Issue 4, 2021, Pages 1973-1986]
Sriwannarat, Warat Design of Doubly Salient Permanent Magnet Generator for ‎Output Power Enhancement using Structural Modification [Volume 7, Issue 4, 2021, Pages 2171-2178]
S. Roknizadeh, S. Alireza Analysis of Axisymmetric Vibration of Functionally-Graded ‎Circular Nano-Plate Based on the Integral Form of the Strain ‎Gradient Model [Volume 7, Issue 4, 2021, Pages 2196-2220]
S. Roknizadeh, S. Alireza Size Effect on the Axisymmetric Vibrational Response of ‎Functionally Graded Circular Nano-Plate Based on the Nonlocal Stress-Driven Method [Volume 8, Issue 3, 2022, Pages 962-980]
Srymbetov, Tamerlan Structural and Aerodynamical Parametric Study of Truss-Core ‎Gas Turbine Rotor Blade [Volume 7, Issue 2, 2021, Pages 831-838]
Stanimirovic, Predrag S. Modified Variational Iteration Technique for the Numerical ‎Solution of Fifth Order KdV-type Equations [Volume 6, Special Issue, 2020, Pages 1220-1227]
Stefanović-Marinović, Jelena Research into the Properties of Selected Single Speed Two-Carrier ‎Planetary Gear Trains [Volume 8, Issue 2, 2022, Pages 699-709]
Stepenko, Nikolai A. Stability Analysis of Gyroscopic Systems with Delay under ‎Synchronous and Asynchronous Switching [Volume 8, Issue 3, 2022, Pages 1113-1119]
Stephen Leon, J. Effect of Tool Shoulder and Pin Cone Angles in Friction Stir Welding using Non-circular Tool Pin [Volume 6, Issue 3, 2020, Pages 554-563]
Strizhak, Pavel A. ‎2D Planar Simulation of Collisions between Liquid Droplets and ‎Solid Particles in a Gas [Volume 9, Issue 3, 2023, Pages 678-694]
Strzalka, Carsten Stress Mode Superposition for a Priori Detection of Highly ‎Stressed Areas: Mode Normalisation and Loading Influence [Volume 7, Issue 3, 2021, Pages 1698-1709]
Subba Rao, A. Viscoelastic Micropolar Convection Flows from an Inclined Plane with Nonlinear Temperature: A Numerical Study [Volume 6, Issue 2, 2020, Pages 183-199]
Sukontasukkul, Piti Shear-flexure Interaction Frame Model on Kerr-type Foundation ‎for Analysis of Non-ductile RC Members on Foundation [Volume 8, Issue 3, 2022, Pages 1076-1090]
Sultan, Mohamed T. H. Impacts of Volume of Carbon Nanotubes on Bending for Carbon-‎Kevlar Hybrid Fabrics [Volume 7, Issue 2, 2021, Pages 839-848]
Sultana, Mafruza Scattering and Backscattering Study of Mechanical Plane Wave in Composite Materials Plates (Earth model 1066B and LiNbO3) [Volume 8, Issue 2, 2022, Pages 518-527]
Sumesh, C.S. Numerical Modeling and Multi Objective Optimization of Face Milling of AISI 304 Steel [Volume 5, Issue 4, 2019, Pages 749-762]
Sun, Jing Laminar Flow Control and Drag Reduction using Biomimetically ‎Inspired Forward Facing Steps [Volume 7, Issue 2, 2021, Pages 752-763]
Sun, Lijun Rotating Cylinder Turbulator Effect on the Heat Transfer of a ‎Nanofluid Flow in a Wavy Divergent Channel‎ [Volume 7, Issue 4, 2021, Pages 1987-1998]
Sun, Zizheng Cracking Elements Method for Simulating Complex Crack Growth [Volume 5, Special Issue: Computational Methods for Material Failure, 2019, Pages 552-562]
Sun, Zizheng Simulation of Hydraulic Fracture Propagation in Fractured Coal ‎Seams with Continuum-discontinuum Elements [Volume 7, Issue 4, 2021, Pages 2185-2195]
Surajo, Abdul-Jalil Heat Transfer Analysis of Nanofluid Flow with Porous Medium through Jeffery Hamel Diverging/Converging Channel [Volume 6, Issue 3, 2020, Pages 433-444]
Surana, Monika Modified Rectangular Patch Antenna Loaded With Multiple C Slots for Multiple Applications [Volume 2, Issue 3, 2016, Pages 192-199]
Surana, Monika Modified U-Slot Stacked Micro-Strip Patch Antenna for Ultra-Wideband Applications in S Band, C Band and X Band [Volume 3, Issue 4, 2017, Pages 293-301]
Surendran, M. Evaluation of Fracture Parameters by Coupling the Edge-Based Smoothed Finite Element Method and the Scaled Boundary Finite Element Method [Volume 5, Special Issue: Computational Methods for Material Failure, 2019, Pages 540-551]
Suryanarayana Reddy, M. Melting Heat Transfer Analysis on Magnetohydrodynamics Buoyancy Convection in an Enclosure: A Numerical Study [Volume 6, Issue 1, 2020, Pages 52-62]
S V K, Varma Effects of Thermal Diffusion and Radiation on Magnetohydrodynamic (MHD) Chemically Reacting Fluid Flow Past a Vertical Plate in a Slip Flow Regime [Volume 5, Issue 2, 2019, Pages 334-343]
Sysyn, Mykola Studying the Strengthening Effect of Railway Ballast in the ‎Direct Shear Test due to Insertion of Middle-size Ballast Particles [Volume 8, Issue 4, 2022, Pages 1387-1397]
Sysyn, Mykola Numerical Optimization of Battery Heat Management of Electric Vehicles [Volume 9, Issue 4, 2023, Pages 1076-1092]
Szpica, Dariusz Theoretical Analysis of the Motorcycle Front Brake Heating ‎Process during High Initial Speed Emergency Braking [Volume 6, Special Issue, 2020, Pages 1431-1437]

T

Tabaza, Taha Impact Dynamics of Nonlinear Materials: FE Analysis [Volume 9, Issue 3, 2023, Pages 728-738]
Tabiei, Ala An Efficient Implementation of Phase Field Method with Explicit Time Integration [Volume 6, Issue 3, 2020, Pages 373-382]
Tadi Beni, Yaghoub Vibration and Buckling Analysis of Functionally Graded Flexoelectric Smart Beam [Volume 5, Issue 5, 2019, Pages 900-917]
Tadi Beni, Yaghoub Size-dependent Nonlinear Forced Vibration Analysis of Viscoelastic/Piezoelectric Nano-beam [Volume 7, Issue 4, 2021, Pages 1878-1891]
Tadi Beni, Yaghoub Power Law Nanofluid through Tapered Artery based on a ‎Consistent Couple Stress Theory [Volume 9, Issue 3, 2023, Pages 623-636]
Tadi Beni, Zahra Size-dependent Nonlinear Forced Vibration Analysis of Viscoelastic/Piezoelectric Nano-beam [Volume 7, Issue 4, 2021, Pages 1878-1891]
Tadjine, Mohamed A New Quantum-computing-based Algorithm for Robotic Arms ‎and Rigid Bodies’ Orientation [Volume 7, Issue 3, 2021, Pages 1836-1846]
Tae, David Mixed Strong Form Representation Particle Method for Solids and Structures [Volume 4, Special Issue: Applied and Computational Issues in Structural Engineering, 2018, Pages 429-441]
Taghikhani, Mohammad Ali Oil Immersed Distribution Transformer HST Reduction using Vegetable Oils and ONAN Cooling [Volume 10, Issue 1, 2024, Pages 13-25]
Taghvaei, Sajjad Musculoskeletal Modeling and Control of the Human Upper Limb during Manual Wheelchair Propulsion: Application in Functional Electrical Stimulation Rehabilitation Therapy [Volume 10, Issue 1, 2024, Pages 92-110]
Tagimalek, Hadi A Hybrid SVM-RVM Algorithm to Mechanical Properties in the Friction Stir Welding Process [Volume 8, Issue 1, 2022, Pages 36-47]
TAHAROU, Belaid Biomechanical Evaluation of Bone Quality Effect on Stresses at Bone-Implant Interface: A Finite Element Study [Volume 7, Issue 3, 2021, Pages 1266-1275]
Taheri, Mohammad Hasan Prediction of Entrance Length for Magnetohydrodynamics Channels Flow using Numerical simulation and Artificial Neural Network [Volume 6, Issue 3, 2020, Pages 582-592]
Taheri, Mohammad Hasan Magnetohydrodynamics Fluid Flow and Heat Transfer over a Permeable Shrinking Sheet with Joule dissipation: Analytical Approach [Volume 6, Issue 4, 2020, Pages 999-1011]
Taheri, Morteza Modeling of Weld Bead Geometry Using Adaptive Neuro-Fuzzy Inference System (ANFIS) in Additive Manufacturing [Volume 6, Issue 1, 2020, Pages 160-170]
Tahir, Madeeha Effects of Non-Linear Thermal Radiation and Chemical Reaction ‎on Time Dependent Flow of Williamson Nanofluid With Combine ‎Electrical MHD and Activation Energy [Volume 7, Issue 2, 2021, Pages 546-558]
Tahir, Muhammad Applications of Higher-Order Derivatives to the Subclasses of ‎Meromorphic Starlike Functions [Volume 7, Issue 1, 2021, Pages 321-333]
Tajaddodianfar, Farid Size Effect Impact on the Mechanical Behavior of an Electrically Actuated Polysilicon Nanobeam based NEMS Resonator [Volume 3, Issue 2, 2017, Pages 135-143]
Talbi, Hind Random Walk Particle Tracking for Convection-diffusion ‎Dominated Problems in Shallow Water Flows [Volume 7, Issue 2, 2021, Pages 486-495]
Talebi, Saeed Vibration analysis of a rotating closed section composite Timoshenko beam by using differential transform method [Volume 1, Issue 4, 2015, Pages 181-186]
Talebi, Saeed Introduction to the Slide Modeling Method for the Efficient Solution of Heat Conduction Calculations [Volume 5, Issue 4, 2019, Pages 680-695]
Tamma, Kumar K. Mixed Strong Form Representation Particle Method for Solids and Structures [Volume 4, Special Issue: Applied and Computational Issues in Structural Engineering, 2018, Pages 429-441]
Tang, Liping Sealing Performance of the End Fitting of a Marine Unbonded Flexible Pipe under Pressure Penetration [Volume 6, Issue 3, 2020, Pages 543-553]
Tang, Liping How Wavelike Bumps Mitigate the Vortex-induced Vibration of a ‎Drilling Riser [Volume 7, Issue 3, 2021, Pages 1413-1424]
Tantawy, Rania Effect of Porosity and Hygrothermal Environment on FGP ‎Hollow Spheres under Electromechanical Loads [Volume 8, Issue 2, 2022, Pages 710-722]
Tantawy, Rania Even and Uneven Porosities on Rotating Functionally Graded ‎Variable-thickness Annular Disks with Magneto-electro-thermo-‎mechanical Loadings [Volume 9, Issue 3, 2023, Pages 695-711]
Tarakaramu, Nainaru Chemical Reaction Effects on Bio-Convection Nanofluid flow between two Parallel Plates in Rotating System with Variable Viscosity: A Numerical Study [Volume 5, Issue 4, 2019, Pages 791-803]
Tariq, Hamza Bin Finite Element Modelling and Simulation of the Hysteretic ‎Behaviour of Single- and Bi-metal Cantilever Beams using a ‎Modified Non-linear Beta-damping Model [Volume 7, Issue 3, 2021, Pages 1663-1675]
Tarlakovskii, Dmitry V. Bernoulli-Euler Beam Unsteady Bending Model with ‎Consideration of Heat and Mass Transfer [Volume 9, Issue 1, 2023, Pages 168-180]
Tavakoli, Mohammad Bagher A Deep Learning Approach to Predict the Flow Field and Thermal ‎Patterns of Nonencapsulated Phase Change Materials ‎Suspensions in an Enclosure‎ [Volume 8, Issue 4, 2022, Pages 1270-1278]
Tavares, Maria R.M. Parameter Estimation in Population Balance through Bayesian ‎Technique Markov Chain Monte Carlo [Volume 7, Issue 2, 2021, Pages 890-901]
TEKİN, Gülçin An Alternative Procedure for Longitudinal Vibration Analysis of ‎Bars with Arbitrary Boundary Conditions [Volume 9, Issue 1, 2023, Pages 294-301]
Teng, Shuai A Bridge Vibration Measurement Method by UAVs based on CNNs ‎and Bayesian Optimization‎ [Volume 9, Issue 3, 2023, Pages 749-762]
Teng, Zhiqiang Sensitivity Analyses of Structural Damage Indicators and ‎Experimental Validations [Volume 7, Issue 2, 2021, Pages 798-810]
Tey, Jing Yuen Thermomechanical Stresses of Multilayered Wellbore Structure ‎of Underground Hydrogen Storage – A Simplified Solution Based ‎on Recursive Algorithm [Volume 8, Issue 4, 2022, Pages 1287-1298]
Tey, Wah Yen Moving Least Squares Method and its Improvement: A Concise Review [Volume 7, Issue 2, 2021, Pages 883-889]
Thirupathi, Thumma Micropolar Fluid Flow Induced due to a Stretching Sheet with Heat Source/Sink and Surface Heat Flux Boundary Condition Effects [Volume 5, Issue 5, 2019, Pages 816-826]
Thornock, Jeremy Nicholas‎ Accelerating the Convergence of Multiphase Flow Simulations ‎when Employing Non-Uniform Structured Grids [Volume 7, Issue 1, 2021, Pages 235-253]
THUMMA, THIRUPATHI ADM Solution for Cu/CuO –Water Viscoplastic Nanofluid ‎Transient Slip Flow from a Porous Stretching Sheet with Entropy ‎Generation, Convective Wall Temperature and Radiative Effects [Volume 7, Issue 3, 2021, Pages 1291-1305]
Tian, Yi Symmetry Reduction and Exact Solutions of a Class of Wave Equations [Volume 7, Issue 1, 2021, Pages 128-134]
Tibaduiza, Diego A. Manifold Learning Algorithms Applied to Structural Damage ‎Classification [Volume 7, Special Issue, 2021, Pages 1158-1166]
Tica, Milan Research into the Properties of Selected Single Speed Two-Carrier ‎Planetary Gear Trains [Volume 8, Issue 2, 2022, Pages 699-709]
Tikhonov, A. A. Natural Magneto-velocity Coordinate System for Satellite ‎Attitude Stabilization: Dynamics and Stability Analysis [Volume 9, Issue 2, 2023, Pages 513-520]
Tikhonov, Alexey A. Natural Magneto-velocity Coordinate System for Satellite ‎Attitude Stabilization: The Concept and Kinematic Analysis [Volume 7, Issue 4, 2021, Pages 2113-2119]
Tikhonov, Alexey A. Nonlinear Control for Attitude Stabilization of a Rigid Body ‎Forced by Nonstationary Disturbances with Zero Mean Values [Volume 7, Issue 2, 2021, Pages 790-797]
Timchenko, Galina Analysis of Free Vibration of Porous Power-law and Sigmoid Functionally Graded Sandwich Plates by the R-functions Method [Volume 9, Issue 4, 2023, Pages 1144-1155]
Tkachenko, Denys Spectral Methods Application in Problems of the Thin-walled ‎Structures Deformation [Volume 8, Issue 2, 2022, Pages 641-654]
Todorov, Todor A Case Study of Combined Application of Smart Materials in a ‎Thermal Energy Harvester with Vibrating Action [Volume 7, Issue 1, 2021, Pages 372-381]
Tondolo, Francesco Two-node Curved Inverse Finite Element Formulations based on ‎Exact Strain-displacement Solution [Volume 9, Issue 1, 2023, Pages 259-273]
Ton That, Hoang Lan Nonlinear Bending Analysis of Functionally Graded Plates Using SQ4T Elements based on Twice Interpolation Strategy [Volume 6, Issue 1, 2020, Pages 125-136]
Ton That, Hoang Lan A Novel Quadrilateral Element for Dynamic Response of Plate ‎Structures Subjected to Blast Loading [Volume 6, Special Issue, 2020, Pages 1314-1323]
Ton-That, Hoang Lan Finite Element Analysis of Functionally Graded Skew Plates in Thermal Environment based on the New Third-order Shear Deformation Theory [Volume 6, Issue 4, 2020, Pages 1044-1057]
Topol, Heiko Bifurcation of Fiber-Reinforced Cylindrical Membranes under ‎Extension, Inflation, and Swelling [Volume 9, Issue 1, 2023, Pages 113-128]
Torabi, Farschad Economic Evaluation of Supplying Commercial Thermal Load by ‎a New CPVT System: A Case Study in Iran [Volume 9, Issue 2, 2023, Pages 371-383]
Torkhov, Nikolay Anatolevich Reducing the Wear of the UHMWPE Used in the Total Hip ‎Replacement after Low-Pressure Plasma Treatment [Volume 8, Issue 3, 2022, Pages 1035-1042]
Toro, Paulo Fernando Prognosis and Detection of Experimental Failures in Open Field Diesel ‎Engines Applying Wiener's Artificial Immunological Systems [Volume 7, Issue 1, 2021, Pages 1-12]
Tounsi, Abdelouahed Buckling Analysis of Embedded Nanosize FG Beams Based on a Refined Hyperbolic Shear Deformation Theory [Volume 4, Issue 3, 2018, Pages 140-146]
Tounsi, Abdelouahed On the Thermo-elastic Response of FG-CNTRC Cross-ply ‎Laminated Plates under Temperature Loading using a New HSDT‎ [Volume 8, Issue 4, 2022, Pages 1370-1386]
Trai, Vu Khac Free Vibration Analysis of Functionally Graded Porous Nano-‎plates with Different Shapes Resting on Elastic Foundation [Volume 7, Issue 3, 2021, Pages 1593-1605]
Tran, Trung Thanh Free Vibration Analysis of Functionally Graded Porous Nano-‎plates with Different Shapes Resting on Elastic Foundation [Volume 7, Issue 3, 2021, Pages 1593-1605]
Trivedi, M. Magnetohydrodynamic Bio-convective Casson Nanofluid Flow: A Numerical Simulation by Paired Quasilinearisation [Volume 7, Issue 4, 2021, Pages 2024-2039]
Trivedi, Mumukshu A Paired Quasi-linearization on Magnetohydrodynamic Flow and Heat Transfer of Casson Nanofluid with Hall Effects [Volume 5, Issue 5, 2019, Pages 849-860]
Troha, Sanjin Research into the Properties of Selected Single Speed Two-Carrier ‎Planetary Gear Trains [Volume 8, Issue 2, 2022, Pages 699-709]
Troha, Sanjin Selection of Optimal Planetary Transmission for Light Electric Vehicle Main Gearbox [(Articles in Press)]
Trokhaniak, Viktor Numerical Modeling of Heat Transfer and Hydrodynamics in Compact Shifted Arrangement Small Diameter Tube Bundles [Volume 7, Issue 1, 2021, Pages 292-301]
Trokhaniak, Viktor Experimental and Numerical Investigation of Heat and Mass ‎Transfer Processes for Determining the Optimal Design of an ‎Accumulator with Phase Transformations [Volume 7, Issue 2, 2021, Pages 611-620]
Tsega, Endalew Getnet A Numerical Simulation of Inspiratory Airflow in Human Airways during Exercise at Sea Level and at High Altitude [Volume 5, Issue 1, 2019, Pages 70-76]
Tsegelnyk, Yevgen Spectral Methods Application in Problems of the Thin-walled ‎Structures Deformation [Volume 8, Issue 2, 2022, Pages 641-654]
Tsiatas, George C. Saint-Venant torsion of non-homogeneous anisotropic bars [Volume 2, Issue 1, 2016, Pages 42-53]
Tsiatas, George C. Nonlinear Buckling and Post-buckling of Shape Memory Alloy Shallow Arches [Volume 6, Issue 3, 2020, Pages 665-683]
Tsiptsis, Ioannis N. Beam & Shell Models for Composite Straight or Curved Bridge Decks with Intermediate Diaphragms & Assessment of Design Specifications [Volume 5, Issue 5, 2019, Pages 998-1022]
Tsiptsis, Ioannis N. Nonlinear Buckling and Post-buckling of Shape Memory Alloy Shallow Arches [Volume 6, Issue 3, 2020, Pages 665-683]
Tukkee, Ali M. Assessment of the Turbine Location for Optimum Performance of the Solar Vortex Engine as a Replacement to the Tall Chimney Solar Updraft Power Plant Design [Volume 10, Issue 1, 2024, Pages 38-54]
Tunç, Cemil Heat Transport Exploration of Free Convection Flow inside ‎Enclosure Having Vertical Wavy Walls [Volume 7, Issue 2, 2021, Pages 520-527]
Tunç, Cemil An analytical Technique for Solving New Computational ‎Solutions of the Modified Zakharov-Kuznetsov ‎Equation Arising ‎in Electrical Engineering [Volume 7, Issue 2, 2021, Pages 715-726]
Turen, Yunus Theory and Experiment in Predicting the Strength of Hybrid ‎Fiber Metal Laminates [Volume 9, Issue 4, 2023, Pages 987-999]
Tyagi, Sunil A DWT and SVM based method for rolling element bearing fault diagnosis and its comparison with Artificial Neural Networks [Volume 3, Issue 1, 2017, Pages 80-91]

U

Udalov, Pavel Hemispherical Resonator of a Rate-integrating Gyroscope: A ‎Novel Method for Determination of Eigenfrequencies and ‎Eigenforms in Presence of Imperfections‎ [Volume 9, Issue 4, 2023, Pages 915-925]
Ulhaq, Sam Transient MHD Convective Flow of Fractional Nanofluid between Vertical Plates [Volume 5, Issue 4, 2019, Pages 592-602]
Umavathi, J.C Free Convection Flow of an Electrically-Conducting Micropolar Fluid between Parallel Porous Vertical Plates Using Differential Transform [Volume 4, Issue 4, 2018, Pages 286-298]
Uosofvand, Hamed Vibration analysis of a rotating closed section composite Timoshenko beam by using differential transform method [Volume 1, Issue 4, 2015, Pages 181-186]
Upreti, Himanshu Comparative Study of Mixed Convective MHD Cu-Water Nanofluid Flow over a Cone and Wedge using Modified Buongiorno’s Model in Presence of Thermal Radiation and Chemical Reaction via Cattaneo-Christov Double Diffusion Model [Volume 7, Issue 3, 2021, Pages 1383-1402]
Uzun, Büşra Optimum Design of Nano-Scaled Beam Using the Social Spider Optimization (SSO) Algorithm [Volume 7, Issue 3, 2021, Pages 1348-1361]

V

Vagheian, Mehran Introduction to the Slide Modeling Method for the Efficient Solution of Heat Conduction Calculations [Volume 5, Issue 4, 2019, Pages 680-695]
Vaghela, Manoj B. Numerical Analysis of an Edge Crack Isotropic Plate with Void/Inclusions under Different Loading by Implementing XFEM [Volume 7, Issue 3, 2021, Pages 1362-1382]
Vaidya, H. Effects of Inclined Magnetic Field and Porous Medium on Peristaltic Flow of a Bingham Fluid with Heat Transfer [Volume 7, Issue 4, 2021, Pages 1892-1906]
Vajravelu, K. Variable Thermal Conductivity and Thermal Radiation Effect on the Motion of a Micro Polar Fluid over an Upper Surface [Volume 5, Issue 2, 2019, Pages 441-453]
Vakili Tahami, Farid Optimum Design of FGX-CNT-Reinforced Reddy Pipes Conveying Fluid Subjected to Moving Load [Volume 2, Issue 4, 2016, Pages 243-253]
Vali, Ahmadreza Global Finite Time Synchronization of Two Nonlinear Chaotic Gyros Using High Order Sliding Mode Control [Volume 1, Issue 1, 2015, Pages 26-34]
Varghese, Vinod Quasi-Static Transient Thermal Stresses in an Elliptical Plate due to Sectional Heat Supply on the Curved Surfaces over the Upper Face [Volume 4, Issue 1, 2018, Pages 27-39]
Varghese, Vinod An Analysis of Thermal-Bending Stresses in a Simply Supported Thin Elliptical Plate [Volume 4, Issue 4, 2018, Pages 299-309]
Varunkumar, M. Mathematical Model of Fluid Flow and Solute Transport in ‎Converging-diverging Permeable Tubes [Volume 9, Issue 4, 2023, Pages 900-914]
Vasilets, Victor Nikolaevich Reducing the Wear of the UHMWPE Used in the Total Hip ‎Replacement after Low-Pressure Plasma Treatment [Volume 8, Issue 3, 2022, Pages 1035-1042]
Vasu, B. Non-linear Radiation and Navier-slip effects on UCM Nanofluid ‎Flow past a Stretching Sheet under Lorentzian Force [Volume 7, Issue 2, 2021, Pages 638-645]
Velieva, N.I. Larin Parameterization to Solve the Problem of Analytical ‎Construction of the Optimal Regulator of Oscillatory Systems ‎with Liquid Dampers [Volume 6, Special Issue, 2020, Pages 1426-1430]
Venkatadri, K. Melting Heat Transfer Analysis on Magnetohydrodynamics Buoyancy Convection in an Enclosure: A Numerical Study [Volume 6, Issue 1, 2020, Pages 52-62]
Venkateswarlu, B. Magneto Casson-Carreau Fluid Flow through a Circular Porous ‎Cylinder with Partial Slip‎ [Volume 8, Issue 4, 2022, Pages 1208-1221]
Venkateswarlu, S. Multivariate Jeffrey Fluid Flow past a Vertical Plate through Porous Medium [Volume 6, Issue 3, 2020, Pages 605-616]
Verdete, Marta Numerical Analysis on the Bond Performance of Different ‎Anchored Joints under Monotonic and Cyclic Pull-push Loading [Volume 8, Issue 1, 2022, Pages 388-404]
Verma, Amit K A Novel Approach to Compute the Numerical Solution of Variable Coefficient Fractional Burgers' Equation with Delay [Volume 7, Issue 3, 2021, Pages 1550-1564]
Verma, Amit K. A New Taylor Series based Numerical Method: Simple, Reliable, and Promising [Volume 9, Issue 4, 2023, Pages 1122-1134]
Verma, Amit K. A New Class of Linear Canonical Wavelet Transform [Volume 10, Issue 1, 2024, Pages 64-79]
Verma, Amit Kumar On Approximate Stationary Radial Solutions for a Class of Boundary Value Problems Arising in Epitaxial Growth Theory [Volume 6, Issue 4, 2020, Pages 713-734]
Verma, Lajja A New Taylor Series based Numerical Method: Simple, Reliable, and Promising [Volume 9, Issue 4, 2023, Pages 1122-1134]
Vestroni, Fabrizio Vibration Mitigation of Rail Noise Barriers by Hysteretic Absorbers [Volume 7, Special Issue, 2021, Pages 1205-1217]
Viana, Guilherme Effect of Temperature and Moisture on the Impact Behaviour of ‎Adhesive Joints for the Automotive Industry [Volume 7, Issue 3, 2021, Pages 1488-1500]
Viegas, Bruno M. Parameter Estimation in Population Balance through Bayesian ‎Technique Markov Chain Monte Carlo [Volume 7, Issue 2, 2021, Pages 890-901]
Vijaya Lakshmi, R. Variable Thermal Conductivity and Thermal Radiation Effect on the Motion of a Micro Polar Fluid over an Upper Surface [Volume 5, Issue 2, 2019, Pages 441-453]
Vijaya Lakshmi, R. Exploration of the Significance of Autocatalytic Chemical Reaction and Cattaneo-Christov Heat Flux on the Dynamics of a Micropolar Fluid [Volume 6, Issue 1, 2020, Pages 77-89]
Vikram, P. Computational Fluid Dynamic Analysis of Amphibious Unmanned Aerial Vehicle [Volume 8, Issue 2, 2022, Pages 475-484]
Villalba Morales, Jesus D. Shape Optimization of Slotted Steel Plate Dampers using the ‎Simulated Annealing Algorithm [Volume 9, Issue 3, 2023, Pages 870-883]
Villecco, Francesco Sizing the Actuators for a Dragon Fly Prototype [Volume 10, Issue 1, 2024, Pages 152-163]
Viswanathan, K.K. Mathematical Analysis of Poiseuille Flow of Casson Fluid past Porous Medium [Volume 8, Issue 2, 2022, Pages 456-474]
Viswanathan, K.K. Theoretical Study on Poiseuille Flow of Herschel-Bulkley Fluid in ‎Porous Media‎ [Volume 8, Issue 4, 2022, Pages 1246-1269]
Vnuchkov, Dmitry Performance of Two Types of High Speed, High Efficiency ‎Axisymmetric Intakes [Volume 7, Issue 1, 2021, Pages 93-101]
Vosniakos, George-Christopher Numerical Analysis of the Deformation of a Shearing Machine ‎Tool under Excessive Blade Clearance [Volume 7, Issue 2, 2021, Pages 496-504]
Vovk, Yuriy The Dynamics of the Working Body of the Tubular Conveyor with ‎the Chain Drive [Volume 7, Issue 3, 2021, Pages 1710-1718]
Vrcan, Željko Research into the Properties of Selected Single Speed Two-Carrier ‎Planetary Gear Trains [Volume 8, Issue 2, 2022, Pages 699-709]
Vrcan, Željko Selection of Optimal Planetary Transmission for Light Electric Vehicle Main Gearbox [(Articles in Press)]
Vu, Hoai Nam An Analytical Approach of Nonlinear Thermo-mechanical Buckling of Functionally Graded Graphene-reinforced Composite Laminated Cylindrical Shells under Compressive Axial Load Surrounded by Elastic Foundation [Volume 6, Issue 2, 2020, Pages 357-372]
Vu, Minh Duc An Analytical Approach of Nonlinear Thermo-mechanical Buckling of Functionally Graded Graphene-reinforced Composite Laminated Cylindrical Shells under Compressive Axial Load Surrounded by Elastic Foundation [Volume 6, Issue 2, 2020, Pages 357-372]

W

Wacks, Daniel H. Forced Response of a Low-Pressure Turbine Blade using ‎Spectral/hp Element Method: Direct Numerical Simulation‎ [Volume 7, Issue 1, 2021, Pages 135-147]
Wagg, David Direct Normal Form Analysis of Oscillators with Different ‎Combinations of Geometric Nonlinear Stiffness Terms [Volume 7, Special Issue, 2021, Pages 1167-1182]
Waheed, Akindoye A Modeling of heat generations for different tool profiles in friction stir welding: study of tool geometry and contact conditions [Volume 3, Issue 1, 2017, Pages 37-59]
Waheed, M A Analytical Investigations of the Effects of Tool Pin Profile and Process Parameters on the Peak Temperature in Friction Stir Welding [Volume 3, Issue 2, 2017, Pages 114-124]
Waini, Iskandar Insight into Stability Analysis on Modified Magnetic Field of ‎Radiative Non-Newtonian Reiner–Philippoff Fluid Model‎ [Volume 8, Issue 2, 2022, Pages 745-753]
Wan Azmi, Wan Faezah Mathematical Modelling of MHD Blood Flow with Gold Nanoparticles in Slip Small Arteries [Volume 10, Issue 1, 2024, Pages 125-139]
Wang, Hai Dynamic Response of Functionally Graded Carbon ‎Nanotube-Reinforced Hybrid Composite Plates [Volume 8, Issue 1, 2022, Pages 182-195]
Wang, Ji The Integrated Analysis of Vibrations of Quartz Crystal Plates ‎through Artificial Coupling Factors [Volume 7, Issue 1, 2021, Pages 69-77]
Wang, Ji An Analysis of Nonlinear Beam Vibrations with the Extended ‎Rayleigh-Ritz Method [Volume 8, Issue 4, 2022, Pages 1299-1306]
Wang, Jian Laminar Flow Control and Drag Reduction using Biomimetically ‎Inspired Forward Facing Steps [Volume 7, Issue 2, 2021, Pages 752-763]
Wang, Kang-Jia A Simple Approach for the Fractal Riccati Differential Equation [Volume 7, Issue 1, 2021, Pages 177-181]
Wang, KangLe Fractal Variational Theory for Chaplygin-He Gas in a Microgravity Condition [Volume 7, Issue 1, 2021, Pages 182-188]
Wang, Liqi How Wavelike Bumps Mitigate the Vortex-induced Vibration of a ‎Drilling Riser [Volume 7, Issue 3, 2021, Pages 1413-1424]
Wang, Ping Studying the Strengthening Effect of Railway Ballast in the ‎Direct Shear Test due to Insertion of Middle-size Ballast Particles [Volume 8, Issue 4, 2022, Pages 1387-1397]
Wang, Shaowei Transient Electro-osmotic Slip Flow of an Oldroyd-B Fluid with Time-fractional Caputo-Fabrizio Derivative [Volume 5, Issue 4, 2019, Pages 779-790]
Wang, Shu Diffusion-thermo Effects in Stagnation Point Flow of Second ‎Grade Fluid past a Stretching Plate [Volume 7, Issue 2, 2021, Pages 902-912]
Wang, Xiaoping Transient Electro-osmotic Slip Flow of an Oldroyd-B Fluid with Time-fractional Caputo-Fabrizio Derivative [Volume 5, Issue 4, 2019, Pages 779-790]
Wang, Yan Investigation of Nanoﬂuid Natural Convection Heat Transfer in ‎Open Ended L-shaped Cavities utilizing LBM [Volume 7, Issue 4, 2021, Pages 2064-2083]
WANG, Kainan Precision Shape Control of Ultra-thin Shells with Strain Actuators [Volume 7, Special Issue, 2021, Pages 1130-1137]
Wanglertpanich, Kiatbodin A Study of Curved Louver Fin Configuration for ‎Heat Transfer Enhancement [Volume 8, Issue 2, 2022, Pages 754-763]
Waqas, Hassan Effects of Non-Linear Thermal Radiation and Chemical Reaction ‎on Time Dependent Flow of Williamson Nanofluid With Combine ‎Electrical MHD and Activation Energy [Volume 7, Issue 2, 2021, Pages 546-558]
Wei, Dongming Finite Element Solutions of Cantilever and Fixed Actuator Beams Using Augmented Lagrangian Methods [Volume 4, Issue 2, 2018, Pages 125-132]
Wei, Dongming Traveling Waves of Some Symmetric Planar Flows of Non-Newtonian Fluids [Volume 5, Issue 2, 2019, Pages 344-354]
Wei, Tonghui Fatigue Life Analysis of Bus Body based on User Target Load Spectrum‎ [Volume 7, Issue 2, 2021, Pages 965-969]
W. Muhieldeen, Mohammed Moving Least Squares Method and its Improvement: A Concise Review [Volume 7, Issue 2, 2021, Pages 883-889]
Wu, Rongxing The Integrated Analysis of Vibrations of Quartz Crystal Plates ‎through Artificial Coupling Factors [Volume 7, Issue 1, 2021, Pages 69-77]
Wu, Rongxing An Analysis of Nonlinear Beam Vibrations with the Extended ‎Rayleigh-Ritz Method [Volume 8, Issue 4, 2022, Pages 1299-1306]

X

Xie, Longtao The Integrated Analysis of Vibrations of Quartz Crystal Plates ‎through Artificial Coupling Factors [Volume 7, Issue 1, 2021, Pages 69-77]
Xu, Bo Exp-function Method and Reduction Transformations for Rogue ‎Wave Solutions of the Davey-Stewartson Equations‎ [Volume 7, Issue 1, 2021, Pages 102-108]
Xu, Qianglin Design of Cooling Water System (CWS) for CRAFT Lower Hybrid ‎Current Driven (LHCD) System‎ [Volume 7, Issue 2, 2021, Pages 470-477]
Xu, Xiaojian Sensitivity Analyses of Structural Damage Indicators and ‎Experimental Validations [Volume 7, Issue 2, 2021, Pages 798-810]
Xu, Yousheng Scalings of Inverse Energy Transfer and Energy Decay in 3-D Decaying Isotropic Turbulence with Non-rotating or Rotating Frame of Reference [Volume 5, Issue 4, 2019, Pages 639-646]

Y

Yadav, Dhananjay The Density-Driven Nanofluid Convection in an Anisotropic Porous Medium Layer with Rotation and Variable Gravity Field: A Numerical Investigation [Volume 6, Issue 3, 2020, Pages 699-712]
Yadav, Dhananjay Effect of Throughflow on the Convective Instabilities in an ‎Anisotropic Porous Medium Layer with Inconstant Gravity [Volume 7, Issue 4, 2021, Pages 1964-1972]
Yadav, Sanjay Magneto-bio-thermal Convection in Rotating Nanoliquid ‎containing Gyrotactic Microorganism [Volume 7, Issue 4, 2021, Pages 1973-1986]
Yaghobi, Mojtaba Scale-Dependent Dynamic Behavior of Nanowire-Based Sensor in Accelerating Field [Volume 5, Issue 2, 2019, Pages 486-497]
Yaghootian, Amin Nonlocal Elasticity Effect on Linear Vibration of Nano-circular Plate Using Adomian Decomposition Method [Volume 6, Issue 1, 2020, Pages 63-76]
Yaghootian, Amin Investigation on the Crack Effect in the Cylinder and Matrix on the Backscattering Field Frequency Specifications using the Finite Element Method [Volume 8, Issue 2, 2022, Pages 448-455]
Yaghootian, Amin Calculation of Backscattered Ultrasonic Waves Field from a ‎Copper-clad Steel Rod Immersing in Water and Effect of Clad ‎Corrosion and Interfacial Disbond between Clad and Rod Defects ‎on this Field using the Finite Element Method [Volume 9, Issue 1, 2023, Pages 58-71]
Yakimov, Anton S. Flow Regimes Characteristics of Water-crude Oil in a Rectangular ‎Y-microchannel [Volume 8, Issue 2, 2022, Pages 655-670]
Yakimov, A.S. Verification and Validation of a Network Algorithm for Single-phase Flow Modeling using Microfluidic Experiments [Volume 9, Issue 4, 2023, Pages 1156-1167]
Yan, Yubin Analysis of Transient Rivlin-Ericksen Fluid and Irreversibility of Exothermic Reactive Hydromagnetic Variable Viscosity [Volume 6, Issue 1, 2020, Pages 26-36]
Yan, Zhaocheng A Bridge Vibration Measurement Method by UAVs based on CNNs ‎and Bayesian Optimization‎ [Volume 9, Issue 3, 2023, Pages 749-762]
Yang, Lei Design of Cooling Water System (CWS) for CRAFT Lower Hybrid ‎Current Driven (LHCD) System‎ [Volume 7, Issue 2, 2021, Pages 470-477]
Yang, Lung-Jieh Computational Fluid Dynamic Analysis of Amphibious Unmanned Aerial Vehicle [Volume 8, Issue 2, 2022, Pages 475-484]
Yang, Z. A Review of Recent Studies on Simulations for Flow around High-Speed Trains [Volume 5, Issue 2, 2019, Pages 311-333]
Yang, Zhigang Comprehensive Investigating on the Aerodynamic Influences of the Wheel Contact Patch [Volume 6, Issue 4, 2020, Pages 934-955]
Yang, Zhiyin Computational Analysis of Turbulent Flow over a Bluff Body with ‎Drag Reduction Devices [Volume 6, Special Issue, 2020, Pages 1210-1219]
Yang, Zhiyin Assessment of Drag Reduction Devices Mounted on a Simplified ‎Tractor-Trailer Truck Model [Volume 7, Issue 1, 2021, Pages 45-53]
Yang, Zhiyin Computational Study of Flow around 2D and 3D Tandem Bluff Bodies [Volume 7, Issue 2, 2021, Pages 528-534]
Yao, Hong How Wavelike Bumps Mitigate the Vortex-induced Vibration of a ‎Drilling Riser [Volume 7, Issue 3, 2021, Pages 1413-1424]
Yao, Lidong Design of Cooling Water System (CWS) for CRAFT Lower Hybrid ‎Current Driven (LHCD) System‎ [Volume 7, Issue 2, 2021, Pages 470-477]
Yao, ShaoWen Fractal Variational Theory for Chaplygin-He Gas in a Microgravity Condition [Volume 7, Issue 1, 2021, Pages 182-188]
Yapa, Ruslan Design of Cellular Members under Axial-Shear-Flexure Interaction [(Articles in Press)]
Yarasca, J. On Bending Response of Doubly Curved Laminated Composite Shells Using Hybrid Refined Models [Volume 5, Issue 5, 2019, Pages 875-899]
Yasir, Reisan Y. Numerical Simulation of Non-Newtonian Inelastic Flows in Channel based on Artificial Compressibility Method [Volume 6, Issue 2, 2020, Pages 271-283]
Yazdanian, Milan Thermal Performance of Oscillating Blade with Various ‎Geometries in a Straight Channel [Volume 8, Issue 1, 2022, Pages 114-128]
Yépez-Martínez, Huitzilín Laplace Variational Iteration Method for Modified Fractional Derivatives with Non-singular Kernel [Volume 6, Issue 3, 2020, Pages 684-698]
Yeasmin, Ismot Ara Modified Multi-level Residue Harmonic Balance Method for Solving Nonlinear Vibration Problem of Beam Resting on Nonlinear Elastic Foundation [Volume 5, Issue 4, 2019, Pages 627-638]
Yehia, H.M. Effect of the Gravity and Magnetic Field to Find Regular Precessions ‎of a Satellite-gyrostat with Principal Axes on a Circular Orbit [Volume 7, Issue 4, 2021, Pages 2120-2128]
Yehia, H.M. A New Solution for the Classical Problem of a Rigid Body Motion ‎in a Liquid [Volume 7, Issue 4, 2021, Pages 2179-2184]
Yekrangi, Alireza Modeling of the intermolecular Force-Induced Adhesion in Freestanding Nanostructures Made of Nano-beams [Volume 2, Issue 1, 2016, Pages 1-7]
Yekrangi, Alireza Investigation of the vdW Force-Induced Instability in Nano-scale Actuators Fabricated form Cylindrical Nanowires [Volume 2, Issue 1, 2016, Pages 8-20]
Yekrangi, Alireza Electromechanical Performance of NEMS Actuator Fabricated from Nanowire under quantum vacuum fluctuations using GDQ and MVIM [Volume 3, Issue 2, 2017, Pages 125-134]
Yekrangi, Alireza Scale-Dependent Dynamic Behavior of Nanowire-Based Sensor in Accelerating Field [Volume 5, Issue 2, 2019, Pages 486-497]
Yekrangi Sendi, Alireza The Urban Path Routing Adjustable Optimization by Means of Wavelet Transform and Multistage Genetic Algorithm [Volume 5, Issue 4, 2019, Pages 696-703]
Yeo, Wei Hong Thermomechanical Stresses of Multilayered Wellbore Structure ‎of Underground Hydrogen Storage – A Simplified Solution Based ‎on Recursive Algorithm [Volume 8, Issue 4, 2022, Pages 1287-1298]
Yew, Ming Chian Thermomechanical Stresses of Multilayered Wellbore Structure ‎of Underground Hydrogen Storage – A Simplified Solution Based ‎on Recursive Algorithm [Volume 8, Issue 4, 2022, Pages 1287-1298]
Yildirim, Ahmet A Modified Energy Balance Method to Obtain Higher-order Approximations to the Oscillators with Cubic and Harmonic Restoring Force [Volume 6, Issue 2, 2020, Pages 320-331]
Yinusa, Ahmed Dynamic Analysis of the Biomechanical Model of Head Load Impact Using Differential Transform Method [Volume 6, Issue 4, 2020, Pages 893-907]
Yıldırım, Vebil Exact Radial Free Vibration Frequencies of Power-Law Graded Spheres [Volume 4, Issue 3, 2018, Pages 175-186]
Yıldırım, Vebil The Complementary Functions Method (CFM) Solution to the Elastic Analysis of Polar Orthotropic Rotating Discs [Volume 4, Issue 3, 2018, Pages 216-230]
Yooyen, Soemsak A Stress Tensor-based Failure Criterion for Ordinary State-based ‎Peridynamic Models‎ [Volume 8, Issue 2, 2022, Pages 617-628]
Youcef, Ahmed Numerical Analysis of the Baffles Inclination on Fluid Behavior ‎in a Shell and Tube Heat Exchanger [Volume 7, Issue 1, 2021, Pages 312-320]
Yousefi, Mohammad Numerical Simulation of Unsteady Flow toward a Stretching/Shrinking Sheet in Porous Medium Filled with a Hybrid Nanofluid [Volume 8, Issue 1, 2022, Pages 11-20]
Yousefi, Mohiedin Theoretical and Experimental Investigation on Mechanical Behavior of Aluminum to Aluminum Tubular Bonded Lap Joint under Pure Torsion and a Finite Element Comparison with Hybrid Rivet/Bonded Joint [Volume 8, Issue 2, 2022, Pages 485-492]
Yousefi-Koma, Aghil Size Effect Impact on the Mechanical Behavior of an Electrically Actuated Polysilicon Nanobeam based NEMS Resonator [Volume 3, Issue 2, 2017, Pages 135-143]
Yu, Whitney Scalings of Inverse Energy Transfer and Energy Decay in 3-D Decaying Isotropic Turbulence with Non-rotating or Rotating Frame of Reference [Volume 5, Issue 4, 2019, Pages 639-646]
Yu, Xiaoyan Comprehensive Investigating on the Aerodynamic Influences of the Wheel Contact Patch [Volume 6, Issue 4, 2020, Pages 934-955]
Yusoff, M.Z. Two-Dimensional Numerical Study of the Transient Flow ‎Conditions in Complete Shock Tunnel‎ [Volume 7, Issue 2, 2021, Pages 956-964]
Yusufoglu, Elcin Nonlinear Dynamic Behavior of Hyperbolic Paraboloidal Shells ‎Reinforced by Carbon Nanotubes with Various Distributions [Volume 7, Issue 2, 2021, Pages 913-921]

Z

Zahari, Rizal Impacts of Volume of Carbon Nanotubes on Bending for Carbon-‎Kevlar Hybrid Fabrics [Volume 7, Issue 2, 2021, Pages 839-848]
Zahedi, Ehsan Efficient Solution of Nonlinear Duffing Oscillator [Volume 6, Issue 2, 2020, Pages 219-234]
Zahedi, Mohsen Efficient Solution of Nonlinear Duffing Oscillator [Volume 6, Issue 2, 2020, Pages 219-234]
Zainal, Nurul Amira Insight into Stability Analysis on Modified Magnetic Field of ‎Radiative Non-Newtonian Reiner–Philippoff Fluid Model‎ [Volume 8, Issue 2, 2022, Pages 745-753]
Zakariapour, Mostafa The Urban Path Routing Adjustable Optimization by Means of Wavelet Transform and Multistage Genetic Algorithm [Volume 5, Issue 4, 2019, Pages 696-703]
Zamani, Mohammad Reza Experimental and Numerical Buckling Analysis of Carbon Fiber Composite Lattice Conical Structure before and after Lateral Impact [Volume 6, Issue 4, 2020, Pages 813-822]
Zamani, Mohsen Numerical Study of the Hydrodynamic Behavior of an Archimedes Screw Turbine by Experimental Data in order to Optimize Turbine Performance: The Genetic Algorithm [Volume 9, Issue 4, 2023, Pages 1060-1075]
Zamani, Pedram On the Influence of Riveting Process Parameters on Fatigue Life of Riveted Lap Joint [Volume 6, Issue 2, 2020, Pages 248-258]
Zandavi, Seid Miad The Urban Path Routing Adjustable Optimization by Means of Wavelet Transform and Multistage Genetic Algorithm [Volume 5, Issue 4, 2019, Pages 696-703]
Zapata Monsalve, Johan Steven Analysis of a Jet Pump Performance under Different Primary Nozzle ‎Positions and Inlet Pressures using two Approaches: One Dimensional ‎Analytical Model and Three Dimensional CFD Simulations‎ [Volume 6, Special Issue, 2020, Pages 1228-1244]
Zare, Jamal Pull-in behavior analysis of vibrating functionally graded micro-cantilevers under suddenly DC voltage [Volume 1, Issue 1, 2015, Pages 17-25]
Zarei, Mehdi Investigating the Ultrasonic Assistance in the Tube Hydroforming Process [Volume 3, Issue 3, 2017, Pages 178-184]
Zarei, Mehdi Buckling and Vibration Analysis of Tapered Circular Nano Plate [Volume 4, Issue 1, 2018, Pages 40-54]
Zarei, Mehdi Investigation on the Ultrasonic Tube Hydroforming in the Bulging Process Using Finite Element Method [Volume 3, Issue 4, 2017, Pages 251-257]
Zarei, Mohammad Finite Element Analysis for CFST Columns under Blast Loading [Volume 3, Issue 4, 2017, Pages 283-292]
Zareipour, Farzaneh Electrochemical and Mechanical Properties of Ni/g-C3N4 ‎Nanocomposite Coatings with Enhanced Corrosion Protective ‎Properties: A Case Study for Modeling the Corrosion Resistance ‎by ANN and ANFIS Models [Volume 9, Issue 3, 2023, Pages 590-606]
Zarezadeh, Alireza Electrochemical and Mechanical Properties of Ni/g-C3N4 ‎Nanocomposite Coatings with Enhanced Corrosion Protective ‎Properties: A Case Study for Modeling the Corrosion Resistance ‎by ANN and ANFIS Models [Volume 9, Issue 3, 2023, Pages 590-606]
Zargaripoor, Ali Study on Free Vibration and Wave Power Reflection in Functionally Graded Rectangular Plates using Wave Propagation Approach [Volume 5, Issue 1, 2019, Pages 77-90]
Zehn, Manfred W. Stress Mode Superposition for a Priori Detection of Highly ‎Stressed Areas: Mode Normalisation and Loading Influence [Volume 7, Issue 3, 2021, Pages 1698-1709]
Zeidi, Seyed mohammadjavad Investigation the effects of injection pressure and compressibility and nozzle entry in diesel injector nozzle’s flow [Volume 1, Issue 2, 2015, Pages 83-94]
Zeighami Salimabad, Mehdi Calculation of Backscattered Ultrasonic Waves Field from a ‎Copper-clad Steel Rod Immersing in Water and Effect of Clad ‎Corrosion and Interfacial Disbond between Clad and Rod Defects ‎on this Field using the Finite Element Method [Volume 9, Issue 1, 2023, Pages 58-71]
Zekry, Marwa H. Approximate Solutions of Coupled Nonlinear Oscillations: ‎Stability Analysis [Volume 7, Issue 2, 2021, Pages 382-395]
Zellhofer, Markus Structural Health Monitoring of Multi-Storey Frame Structures using Piezoelectric Incompatibility Filters: Theory and Numerical Verification [Volume 7, Special Issue, 2021, Pages 1138-1157]
Zemskov, Andrei V. Bernoulli-Euler Beam Unsteady Bending Model with ‎Consideration of Heat and Mass Transfer [Volume 9, Issue 1, 2023, Pages 168-180]
Zenkour, Ashraf Fractional Thermoelasticity Model of a 2D Problem of Mode-I Crack in a Fibre-Reinforced Thermal Environment [Volume 5, Issue 2, 2019, Pages 269-280]
Zenkour, Ashraf Thermoelastic Vibration of Temperature-Dependent Nanobeams Due to Rectified Sine Wave Heating—A State Space Approach [Volume 5, Issue 2, 2019, Pages 299-310]
Zenkour, Ashraf M. Effect of Porosity and Hygrothermal Environment on FGP ‎Hollow Spheres under Electromechanical Loads [Volume 8, Issue 2, 2022, Pages 710-722]
Zenkour, Ashraf M. Bending of Functionally Graded Sandwich Nanoplates Resting on ‎Pasternak Foundation under Different Boundary Conditions [Volume 6, Special Issue, 2020, Pages 1245-1259]
Zenkour, Ashraf M. Even and Uneven Porosities on Rotating Functionally Graded ‎Variable-thickness Annular Disks with Magneto-electro-thermo-‎mechanical Loadings [Volume 9, Issue 3, 2023, Pages 695-711]
Zhang, Cheng-Zhuo Different Groups of Variational Principles for Whitham-Broer-‎Kaup Equations in Shallow Water [Volume 6, Special Issue, 2020, Pages 1178-1183]
Zhang, Cheng-Zhuo Variational Principles for Two Compound Nonlinear Equations ‎with Variable Coefficients [Volume 7, Issue 2, 2021, Pages 415-421]
Zhang, Dichuan Finite Element Modelling and Simulation of the Hysteretic ‎Behaviour of Single- and Bi-metal Cantilever Beams using a ‎Modified Non-linear Beta-damping Model [Volume 7, Issue 3, 2021, Pages 1663-1675]
Zhang, D.P. Semi-Analytical Solution for Vibration of Nonlocal Piezoelectric Kirchhoff Plates Resting on Viscoelastic Foundation [Volume 4, Issue 3, 2018, Pages 202-215]
Zhang, Jiqiao Sensitivity Analyses of Structural Damage Indicators and ‎Experimental Validations [Volume 7, Issue 2, 2021, Pages 798-810]
Zhang, Sheng Exp-function Method and Reduction Transformations for Rogue ‎Wave Solutions of the Davey-Stewartson Equations‎ [Volume 7, Issue 1, 2021, Pages 102-108]
Zhang, Wenlong An Efficient Implementation of Phase Field Method with Explicit Time Integration [Volume 6, Issue 3, 2020, Pages 373-382]
Zhang, Yiming Cracking Elements Method for Simulating Complex Crack Growth [Volume 5, Special Issue: Computational Methods for Material Failure, 2019, Pages 552-562]
Zhang, Yue Exp-function Method and Reduction Transformations for Rogue ‎Wave Solutions of the Davey-Stewartson Equations‎ [Volume 7, Issue 1, 2021, Pages 102-108]
Zhao, Fu-Yun The Brick Thermal Performance Improvement using Phase ‎Change Materials [Volume 6, Special Issue, 2020, Pages 1283-1292]
Zhao, Jinhai Modelling of Crack Growth Using a New Fracture Criteria Based Peridynamics [Volume 5, Special Issue: Computational Methods for Material Failure, 2019, Pages 498-516]
Zhao, Yazhou Verification and Validation of Common Derivative Terms Approximation in Meshfree Numerical Scheme [Volume 4, Issue 3, 2018, Pages 231-244]
Zhigarev, V.A. Verification and Validation of a Network Algorithm for Single-phase Flow Modeling using Microfluidic Experiments [Volume 9, Issue 4, 2023, Pages 1156-1167]
Zhou, Haifeng Simulation of Hydraulic Fracture Propagation in Fractured Coal ‎Seams with Continuum-discontinuum Elements [Volume 7, Issue 4, 2021, Pages 2185-2195]
Zhou, Jiahua A Simplified Analytical Method for Detuning Periodic Pile Barriers [Volume 8, Issue 4, 2022, Pages 1480-1487]
Zhou, Jinxuan Design of Cooling Water System (CWS) for CRAFT Lower Hybrid ‎Current Driven (LHCD) System‎ [Volume 7, Issue 2, 2021, Pages 470-477]
Zhou, Liming Fatigue Life Analysis of Bus Body based on User Target Load Spectrum‎ [Volume 7, Issue 2, 2021, Pages 965-969]
Zhou, Linghao Study of the Vibration Characteristics of SA 330 Helicopter Planetary Main Gearbox [Volume 9, Issue 4, 2023, Pages 1093-1106]
Zhou, Yunlai Sealing Performance of the End Fitting of a Marine Unbonded Flexible Pipe under Pressure Penetration [Volume 6, Issue 3, 2020, Pages 543-553]
Zhu, Jiajia A Generalized Identification of Joint Structural State and ‎Unknown Inputs Using Data Fusion MKF-UI [Volume 7, Special Issue, 2021, Pages 1198-1204]
Zhu, Lili Design of Cooling Water System (CWS) for CRAFT Lower Hybrid ‎Current Driven (LHCD) System‎ [Volume 7, Issue 2, 2021, Pages 470-477]
Zhu, Luoding Scalings of Inverse Energy Transfer and Energy Decay in 3-D Decaying Isotropic Turbulence with Non-rotating or Rotating Frame of Reference [Volume 5, Issue 4, 2019, Pages 639-646]
Zhu, Xiaohua Sealing Performance of the End Fitting of a Marine Unbonded Flexible Pipe under Pressure Penetration [Volume 6, Issue 3, 2020, Pages 543-553]
Zhu, Xiaohua How Wavelike Bumps Mitigate the Vortex-induced Vibration of a ‎Drilling Riser [Volume 7, Issue 3, 2021, Pages 1413-1424]
Zhu, Xiao-Qian Variational Principles and Solitary Wave Solutions of Generalized ‎Nonlinear Schrödinger Equation in the Ocean [Volume 7, Issue 3, 2021, Pages 1639-1648]
Zhuang, Xiaoying Cracking Elements Method for Simulating Complex Crack Growth [Volume 5, Special Issue: Computational Methods for Material Failure, 2019, Pages 552-562]
Zia, Saqib A Kinetic Flux-vector Splitting Scheme for Two-layer Shallow Flow Model [Volume 8, Issue 3, 2022, Pages 1043-1053]
Ziane, Djelloul Exact Solution for Nonlinear Local Fractional Partial Differential Equations [Volume 6, Issue 2, 2020, Pages 200-208]
Zinani, Flavia Schwarz Franceschini Constructal Design of an Idealize Arterial Bypass Graft: Effect of ‎the Bypass Attachment Pointon Resistance to Flow‎ [Volume 7, Issue 1, 2021, Pages 334-344]
Zinovieva, Tatiana V. Modeling of Flight of the Line Thrower Projectile [Volume 7, Special Issue, 2021, Pages 1070-1076]
Zioui, Nadjet A New Quantum-computing-based Algorithm for Robotic Arms ‎and Rigid Bodies’ Orientation [Volume 7, Issue 3, 2021, Pages 1836-1846]
Zitouni, Ismaine Comparative Study of the Spectral Method, DISPERSE and Other ‎Classical Methods for Plotting the Dispersion Curves in ‎Anisotropic Plates [Volume 9, Issue 4, 2023, Pages 955-973]
Zohoor, Hassan Failure Procedure in Adhesive Composite Joints under Different Types of Loading [Volume 5, Issue 4, 2019, Pages 647-651]
Zulli, Daniele Nonlinear dynamics and stability of a homogeneous model of tall buildings under resonant action [Volume 7, Special Issue, 2021, Pages 1034-1048]
Zuo, Yuting A Fractal Rheological Model for SiC Paste using a Fractal Derivative [Volume 7, Issue 1, 2021, Pages 13-18]
Zvegintsev, Valery Performance of Two Types of High Speed, High Efficiency ‎Axisymmetric Intakes [Volume 7, Issue 1, 2021, Pages 93-101]

Journal of Applied and Computational Mechanics

Author Index

A

B

C

D

E

F

G

H

I

J

K

L

M

N

O

P

Q

R

S

T

U

V

W

X

Y

Z