Vibration Analysis of Different Types of Porous FG Conical Sandwich Shells in Various Thermal Surroundings

Document Type : Research Paper

Authors

1 Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin,, Iran

2 Faculty of Industrial and Mechanical Engineering, Qazvin Branch, Islamic Azad University, Qazvin, Iran

3 Department of Mechanical Engineering, Takestan Branch, Islamic Azad University, Takestan, Iran

Abstract

Vibration behavior of different types of porous functionally graded (FG) conical sandwich shells are investigated based on a modified high order sandwich shells theory for the first time. Sandwich shell includes FG face sheets covering a homogeneous core and the second one includes homogeneous face sheets and a FG core. Power law rule modified by considering two types of porosity distributions is used to model the functionally graded materials. All materials are temperature dependent and uniform, linear and nonlinear temperature distributions are used to model the effect of the temperature variation in the sandwiches. Governing equations are obtained by the Hamilton's energy principle and solved with Galerkin method. To verify the results, they are compared with ones achieved by finite element method obtained by Abaqus software for special cases with the results in literatures.

Keywords

Main Subjects

[1] Vinson, J., The behavior of sandwich structures of isotropic and composite materials, TECHNOMIC, Pennsylvania, 2018.‏
[2] Mahamood, R.M., Akinlabi, E.T., Functionally graded materials. Springer, New York, 2017.‏
[3] Chen C.S., Liu F.H, Chen W.R., Vibration and stability of initially stressed sandwich plates with FGM face sheets in thermal environments. Steel & Composite Structures, 23(3), 2017, 251-261.
[4] Benlahcen F., Belakhdar K. Sellami, M. Tounsi A., Thermal buckling resistance of simply supported FGM plates with parabolic-concave thickness variation. Steel & Composite Structures, 29(5), 2018, 591-602.‏
[5] Khayat M., Dehghan S.M., Najafgholipour M.A., Baghlani A., Free vibration analysis of functionally graded cylindrical shells with different shell theories using semi-analytical method. Steel & Composite Structures, 28(6), 2018, 735-748.‏
[6] Arefi M., Kiani M., Zamani M.H., Nonlocal strain gradient theory for the magneto-electro-elastic vibration response of a porous FG-core sandwich nanoplate with piezomagnetic face sheets resting on an elastic foundation. Journal of Sandwich Structures & Materials, 2018; 1099636218795378.‏
[7] Akbas S.D. Post-buckling responses of functionally graded beams with porosities. Steel & Composite Structures, 24(5), 2017, 579-589.‏
[8] Benferhat R., Hassaine D., Hadji L., Said M., Static analysis of the FGM plate with porosities. Steel & Composite Structures, 21(1), 2016, 123-136.‏
[9] Reddy J.N., Analysis of functionally graded plates. International Journal for Numerical Methods in Engineering. 47(1‐3), 2000, 663-684.
[10] Frostig Y., Baruch M., Vilnay O., Sheinman, I., High-order theory for sandwich-beam behavior with transversely flexible core. Journal of Engineering Mechanics. 118(5), 1992, 1026-1043
[11] Jedari Salami S., Free vibration analysis of sandwich beams with carbon nanotube reinforced face sheets based on extended high-order sandwich panel theory. Journal of Sandwich Structures & Materials, 20(2), 2018, 219-248.‏
[12] Frostig Y., Kardomateas G., Geometrical nonlinear thermal response of sandwich panels with temperature dependent mechanical properties—Extended high-order approach. Journal of Sandwich Structures & Materials, 2019, 1099636218820703.‏
[13] Mohammadi, Y., Khalili, S.M.R., Malekzadeh Fard, K., Low velocity impact analysis of sandwich plates with functionally graded face sheets. Mechanics of Advanced Materials and Structures, 23(4), 2016, 363-374.‏
[14] Mohammadi, Y., Khalili, S.R., Effect of geometrical and mechanical properties on behaviour of sandwich beams with functionally graded face sheets under indentation loading. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 225(4), 2011, 231-244.‏
[15] Van Tung, H., Thermal and thermo mechanical post-buckling of FGM sandwich plates resting on elastic foundations with tangential edge constraints and temperature dependent properties. Composite Structures, 131, 2015, 1028-1039.
[16] Khalili, S.M.R., Mohammadi, Y., Free vibration analysis of sandwich plates with functionally graded face sheets and temperature-dependent material properties: A new approach. European Journal of Mechanics-A/Solids, 35, 2012, 61-74.‏
[17] Duc N.D., Tuan N.D., Tran P., Quan T.Q., Van Thanh N., Nonlinear dynamic response and vibration of imperfect eccentrically stiffened sandwich third-order shear deformable FGM cylindrical panels in thermal environments. Journal of Sandwich Structures & Materials, 21(8), 2019, 2816-2845.‏
[18] Fazzolari, F.A., Natural frequencies and critical temperatures of functionally graded sandwich plates subjected to uniform and non-uniform temperature distributions. Composite Structures. 121, 2015, 197-210.
[19] Talebitooti, M., Thermal effect on free vibration of ring-stiffened rotating functionally graded conical shell with clamped ends. Mechanics of Advanced Materials and Structures. 25(2), 2018, 155-65.
[20] Sofiyev A.H., Parametric vibration of FGM conical shells under periodic lateral pressure within the shear deformation theory. Composites Part B: Engineering, 89, 2016, 282-294.‏
[21] Jin G., Ye T., Su Z., Conical Shells. In: Structural Vibration. Springer, Berlin, Heidelberg, 2015.
[22] Sofiyev A.H., Buckling analysis of freely-supported functionally graded truncated conical shells under external pressures. Composite Structures, 132, 2015, 746-758.
[23] Van Dung D., Chan D.Q., Analytical investigation on mechanical buckling of FGM truncated conical shells reinforced by orthogonal stiffeners based on FSDT. Composite Structures, 159, 2017, 827-841.
[24] Sofiyev A.H., Kuruoglu N., On a problem of the vibration of functionally graded conical shells with mixed boundary conditions. Composites Part B: Engineering, 70, 2015, 122-130
[25] Sofiyev A.H., Schnack E., The vibration analysis of FGM truncated conical shells resting on two-parameter elastic foundations. Mechanics of Advanced Materials and Structures, 19(4), 2012, 241-249.‏
[26] Bardell N.S., Langley R.S., Dunsdon J.M., Aglietti G.S., An h-p finite element vibration analysis of open conical sandwich panels and conical sandwich frusta. Journal of Sound and Vibration, 226(2), 1999, 345-377.‏
[27] Liu R.H., Li J., Non-linear vibration of shallow conical sandwich shells. International Journal of Non-Linear Mechanics, 30(2), 1995, 97-109.‏
[28] Shu C., An efficient approach for free vibration analysis of conical shells. International Journal of Mechanical Sciences, 38(8-9), 1996, 935-949.‏
[29] Tornabene F., Viola E., Inman D.J., 2-D differential quadrature solution for vibration analysis of functionally graded conical, cylindrical shell and annular plate structures. Journal of Sound and Vibration, 328(3), 2009, 259-290.
[30] Sofiyev A.H., 2012. The non-linear vibration of FGM truncated conical shells. Composite Structures, 94(7), 2237-2245.
[31] Najafov A.M., Sofiyev A.H., Kuruoglu N., On the solution of nonlinear vibration of truncated conical shells covered by functionally graded coatings. Acta Mechanica, 225(2), 2014, 563-580.‏
[32] Heydarpour Y., Aghdam M.M., Malekzadeh P., Free vibration analysis of rotating functionally graded carbon nanotube-reinforced composite truncated conical shells. Composite Structures, 117, 2014, 187-200.
[33] Sofiyev A.H., Osmancelebioglu E., The free vibration of sandwich truncated conical shells containing functionally graded layers within the shear deformation theory. Composites Part B: Engineering, 120, 2017, 197-211.‏
[34] Mouli B.C., Kar V.R., Ramji K., Rajesh M., Free vibration of functionally graded conical shell. Materials Today: Proceedings, 5(6), 2018, 14302-14308.
[35] Kiani Y., Dimitri R., Tornabene F., Free vibration study of composite conical panels reinforced with FG-CNTs. Engineering Structures, 172, 2018, 472-482.‏
[36] Sofiyev A.H., Application of the first order shear deformation theory to the solution of free vibration problem for laminated conical shells. Composite Structures, 188, 2018, 340-346.
[37] Shakouri M., Free vibration analysis of functionally graded rotating conical shells in thermal environment. Composites Part B: Engineering, 163, 2019, 574-584.
[38] Sofiyev, A. H., Review of research on the vibration and buckling of the FGM conical shells. Composite Structures, 211, 2019, 301-317.
[39] Shen, H.S., Functionally Graded Materials Nonlinear Analysis of Plates and Shells. CRC Press, New York, 2009.
[40] Boutahar, L., Benamar, R., A homogenization procedure for geometrically non-linear free vibration analysis of functionally graded annular plates with porosities, resting on elastic foundations, Ain Shams Engineering Journal, 7(1), 2016, 313-313.
[41] Reddy, J.N., Mechanics of Laminated Composite Plates and Shells, Theory and Application. CRC Press, New York, 2003.
[42] Lam K.Y., Li H., Influence of boundary conditions on the frequency characteristics of a rotating truncated circular conical shell. Journal of Sound and Vibration, 223, 1999, 171–195.
[43] Li F.M., Kishimoto K., Huang. W.H., The calculations of natural frequencies and forced vibration responses of conical shell using the Rayleigh–Ritz method. Mechanics Research Communications, 36(5), 2009, 595-602.‏
[44] Reddy, J.N., Thermomechanical behavior of functionally graded materials. Texas A&M Univ. College Station, Dept. of Mechanical Engineering, 1998.