Journal of Applied and Computational Mechanics
Free Vibration Analysis of FG Porous Sandwich Plates under Various Boundary Conditions
Document Type : Research Paper
Authors
1 University of Tiaret, Department of Mechanical Engineering, BP 78 Zaaroura, Tiaret,14000, Algeria
2 University of Tiaret, Laboratory of Geomatics and Sustainable Development, Tiaret, 14000, Algeria
3 Suleyman Demirel University, Department of Civil Engineering, Isparta, 32260, Turkey
Abstract
In the present work, free vibration analysis of the square sandwich plate with functionally graded (FG) porous face sheets and isotropic homogenous core is performed under various boundary conditions. For this purpose, the material properties of the sandwich plate are supposed to vary continuously through the thickness direction according to the volume fraction of constituents defined with the modified rule of the mixture including porosity volume fraction with four different types of porosity distribution over the cross-section. Furthermore, a hyperbolic shear displacement theory is used in the kinematic relation of the FG porous sandwich plate, and the equations of motion are derived utilizing Hamilton’s principle. Analytical solutions are achieved for free vibration analysis of square sandwich plates with FG porous face sheets under various boundary conditions, i.e. combinations of clamped (C), simply supported (SS), and free (F) edges are presented. Several parametrical studies are conducted to examine the effects of porosity volume fraction, type of porosity distribution model, lay-up scheme, side to thickness ratio, and boundary conditions on the free vibration of the FG sandwich plates. Finally, it is concluded that the investigated parameters have significant effects on the free vibration of the FG sandwich plates and the negative effects of porosity may be reduced by adopting suitable values for said parameters, considerably.
Keywords
Main Subjects
[1] Koizumi, M., FGM activities in Japan, Composites Part B: Engineering, 28(1-2), 1997, 1–4.
[2] Kieback, B., Neubrand, A., Riedel, H., Processing techniques for functionally graded materials, Materials Science and Engineering: A, 362(1-2), 2013, 81-106.
[3] Naebe, M., Shirvanimoghaddam, K., Functionally graded materials: A review of fabrication and properties, Applied Materials Today, 5, 2016, 223-245.
[4] Civalek Ö, Free vibration of carbon nanotubes reinforced (CNTR) and functionally graded shells and plates based on FSDT via discrete singular convolution method, Composites Part B: Engineering, 111, (2017), 45-59.
[5] Avcar, M., Mohammed, W.K.M., Free vibration of functionally graded beams resting on Winkler-Pasternak foundation, Arabian Journal of Geosciences, 11(10), 2018, 232.
[6] Larbi, L.O., Hadji, L., Meziane, M.A.A., Adda Bedia, E.A., An analytical solution for free vibration of functionally graded beam using a simple first-order shear deformation theory, Wind and Structures, 27(4), 2018, 247-254.
[7] Sahouane, A., Hadji, L., Bourada, M., Numerical analysis for free vibration of functionally graded beams using an original HSDBT, Earthquakes and Structures, 17(1), 2019, 31-37.
[8] Akbaş, S.D., Forced vibration responses of axially functionally graded beams by using Ritz method, Journal of Applied and Computational Mechanics, 2020, https://doi.org/10.22055/JACM.2020.34865.2491
[9] Alsaid-Alwan H.H.S, Avcar M., Analytical solution of free vibration of FG beam utilizing different types of beam theories: A comparative study, Computers and Concrete 26(3), 2020, 285-292.
[10] Civalek, Ö., Avcar, M, Free vibration and buckling analyses of CNT reinforced laminated non-rectangular plates by discrete singular convolution method, Engineering with Computers, 2020, 1-33. https://doi.org/10.1007/s00366-020-01168-8
[11] Vinson J.R., Sandwich Structures: Past, Present, and Future, In: Thomsen O., Bozhevolnaya E., Lyckegaard A. (eds) Sandwich Structures 7: Advancing with Sandwich Structures and Materials, Springer, Dordrecht, 2005.
[12] Zenkour, A.M., A comprehensive analysis of functionally graded sandwich plates: Part 1—Deflection and stresses, International Journal of Solids and Structures, 42(18-19), 2005a, 224-5242.
[13] Zenkour, A.M., A comprehensive analysis of functionally graded sandwich plates: Part 2—Buckling and free vibration, International Journal of Solids and Structures, 42(18-19), 2005b,5243-5258.
[14] Zenkour, A.M., Sobhy, M., Thermal buckling of various types of FGM sandwich plates, Composite Structures, 93(1), 2010, 93-102.
[15] El Meiche, N., Tounsi, A., Ziane, N., Mechab, I. , A new hyperbolic shear deformation theory for buckling and vibration of functionally graded sandwich plate, International Journal of Mechanical Sciences, 53(4), 2011, 237-247.
[16] Mohammadi, Y., Khalili, S.M.R., Free Vibration Analysis of Sandwich Plates with Temperature-Dependent Properties of the Core Materials and Functionally Graded Face Sheets, In Mechanics and Properties of Composed Materials and Structures (pp. 183-197), Springer, Berlin, Heidelberg, 2012.
[17] Bessaim, A., Houari, M.S., Tounsi, A., Mahmoud, S. R., Bedia, E.A.A., A new higher-order shear and normal deformation theory for the static and free vibration analysis of sandwich plates with functionally graded isotropic face sheets, Journal of Sandwich Structures and Materials, 15(6), 2013, 671-703.
[18] Thai, H.T., Nguyen, T.K., Vo, T.P., Lee, J., Analysis of functionally graded sandwich plates using a new first-order shear deformation theory, European Journal of Mechanics-A/Solids, 45, 2014, 211-225.
[19] Tlidji, Y., Daouadji, T. H., Hadji, L., Tounsi, A., Bedia, E.A.A, Elasticity solution for bending response of functionally graded sandwich plates under thermomechanical loading, Journal of Thermal Stresses, 37(7), 2014, 852-869.
[20] Yang, Y., Lam, C.C., Kou, K.P., Iu, V.P., Free vibration analysis of the functionally graded sandwich beams by a mesh free boundary-domain integral equation method, Composite Structures, 117, 2014, 32-39.
[21] Mantari, J.L., Granados, E.V., A refined FSDT for the static analysis of functionally graded sandwich plates, Thin-Walled Structures, 90, 2015, 24(5), 2017, 523-536.
[22] Tounsi, A., Houari, M.S.A., Bessaim, A., A new 3-unknowns non-polynomial plate theory for buckling and vibration of functionally graded sandwich plate, Structural Engineering and Mechanics, 60(4), 2016, 547-565.
[23] Ahmadi, I., A Galerkin layerwise formulation for three-dimensional stress analysis in long sandwich plates, Steel and Composite Structures, 24(5), 2017, 523-536.
[24] Menasria, A., Bouhadra, A., Tounsi, A., Bousahla, A.A., Mahmoud, S.R., A new and simple HSDT for thermal stability analysis of FG sandwich Steel and Composite Structures, 24(5), 2017, plates, Steel and Composite Structures, 25(2), 2017, 157-175.
[25] Şimşek, M., Al-Shujairi, M., Static, free and forced vibration of functionally graded (FG) sandwich beams excited by two successive moving harmonic loads, Composites Part B: Engineering, 108, 2017, 18-34.
[26] Wang, Q., Cui, X., Qin, B., Liang, Q., Tang, J., A semi-analytical method for vibration analysis of functionally graded (FG) sandwich doubly-curved panels and shells of revolution, International Journal of Mechanical Sciences, 134, 2017, 479-499.
[27] Dash, S., Mehar, K., Sharma, N., Mahapatra, T.R., Panda, S.K., Modal analysis of FG sandwich doubly curved shell structure, Structural Engineering and Mechanics, 68(6), 2018, 721-733.
[28] Raissi, H., Shishehsaz, M., Moradi, S., Stress distribution in a five-layer sandwich plate with FG face sheets using layerwise method, Mechanics of Advanced Materials and Structures, 26(14), 2019, 1234-1244.
[29] Rezaiee-Pajand, M., Arabi, E., Masoodi, A.R., Nonlinear analysis of FG-sandwich plates and shells, Aerospace Science and Technology, 87, 2019, 178-189.
[30] Meksi, R., Benyoucef, S., Mahmoudi, A., Tounsi, A., Adda Bedia, E. A., Mahmoud, S.R., An analytical solution for bending, buckling and vibration responses of FGM sandwich plates, Journal of Sandwich Structures and Materials, 21(2), 2020, 727-757.
[31] Nam, P.V., Kien, N.D., Free vibration of FG sandwich plates partially supported by elastic foundation using a quasi-3D finite element formulation, Vietnam Journal of Mechanics, 42(1), 2020, 63-86.
[32] Zhu, J., Lai, Z., Yin, Z., Jeon, J., Lee, S., Fabrication of ZrO2–NiCr functionally graded material by powder metallurgy, Materials Chemistry and Physics, 68, 2001, 130–135.
[33] Wattanasakulpong, N., Ungbhakorn, V., Linear and nonlinear vibration analysis of elastically restrained ends FGM beams with porosities, Aerospace Science and Technology, 32(1), 2014, 111-120.
[34] Ait Atmane, H., Tounsi, A., Bernard, F., Effect of thickness stretching and porosity on mechanical response of a functionally graded beams resting on elastic foundations, International Journal of Mechanics and Materials in Design, 13(1), 2017, 71–84.
[35] Ebrahimi, F., Jafari, A., A higher-order thermomechanical vibration analysis of temperature-dependent FGM beams with porosities, Journal of Engineering, 2016, 2016, 9561504.
[36] Akbaş, Ş.D., Vibration and static analysis of functionally graded porous plates, Journal of Applied and Computational Mechanics, 3(3), 2017, 199-207.
[37] Akbaş, Ş.D., Stability of a non-homogenous porous plate by using generalized differential quadrature method, International Journal of Engineering and Applied Sciences, 9(2), 2017, 147-147.
[38] Akbaş, Ş.D., Nonlinear static analysis of functionally graded porous beams under thermal effect, Coupled Systems Mechanics, 6(4), 2017, 399-415.
[39] Akbaş, Ş.D., Geometrically nonlinear analysis of functionally graded porous beams, Wind and Structures, 27(1), 2018, 59-70.
[40] Akbaş, Ş.D., Longitudinal forced vibration analysis of porous a nanorod, Journal of Engineering Sciences and Design, 7(4), 2019, 736-743.
[41] Zouatnia, N., Hadji, L., Kassoul, A., An analytical solution for bending and vibration responses of functionally graded beams with porosities, Wind and Structures, 25(4), 2017, 329-342.
[42] Arshid, E., Khorshidvand, A.R., Free vibration analysis of saturated porous FG circular plates integrated with piezoelectric actuators via differential quadrature method, Thin-Walled Structures, 125, 2018, 220-233.
[43] Wu, D., Liu, A., Huang, Y., Huang, Y., Pi, Y., Gao, W., Dynamic analysis of functionally graded porous structures through finite element analysis, Engineering Structures, 165, 2018, 87-301.
[44] Avcar, M., Free vibration of imperfect sigmoid and power law functionally graded beams, Steel and Composite Structures, 30(6), 2019, 2603-615.
[45] Chen, D., Yang, J., Kitipornchai, S., Buckling and bending analyses of a novel functionally graded porous plate using Chebyshev-Ritz method, Archives of Civil and Mechanical Engineering, 19(1), 2019, 157-170.
[46] Jalaei, M., Civalek, O., On dynamic instability of magnetically embedded viscoelastic porous FG nanobeam, International Journal of Engineering Science, 143, 2019, 14-32.
[47] Nguyen, L.B., Nguyen, N.V., Thai, C.H., Ferreira, A.M.J., Nguyen-Xuan, H., An isogeometric Bézier finite element analysis for piezoelectric FG porous plates reinforced by graphene platelets, Composite Structures, 214, 2019, 227-245.
[48] Arefi, M., Saeed , F., Bidgoli, EMR., Civalek, Ö., Analysis of porous micro -plates reinforced with FG-GNPs based on Reddy plate theory, Composites Structures, 247, 2020, 112391.
[49] Mashat, D.S., Zenkour, A.M., Radwan, A.F., A quasi 3-D higher-order plate theory for bending of FG plates resting on elastic foundations under hygro-thermo-mechanical loads with porosity, European Journal of Mechanics-A/Solids, 2020, 103985.
[50] Zine, A., Bousahla, A.A., Bourada, F., Benrahou, K.H., Tounsi, A., Adda Bedia, E.A., Mahmoud, S.R., Tounsi, A., Bending analysis of functionally graded porous plates via a refined shear deformation theory, Computers and Concrete, 26(1), 2020, 63-74.
[51] Chen, D., Kitipornchai, S., Yang, J., Nonlinear free vibration of shear deformable sandwich beam with a functionally graded porous core, Thin-Walled Structures, 107, 2016, 39-48.
[52] Rezaei, A.S., Saidi, A.R., Application of Carrera unified formulation to study the effect of porosity on natural frequencies of thick porous–cellular plates, Composites Part B: Engineering, 91, 2016, 361-370.
[53] Fazzolari, F.A., Generalized exponential, polynomial and trigonometric theories for vibration and stability analysis of porous FG sandwich beams resting on elastic foundations, Composites Part B: Engineering, 136, 2018, 254-271.
[54] Fu, T., Chen, Z., Yu, H., Wang, Z., Liu, X., An analytical study of sound transmission through corrugated core FGM sandwich plates filled with porous material, Composites Part B: Engineering, 151, 2018, 161-172.
[55] Zenkour, A.M., A quasi-3D refined theory for functionally graded single-layered and sandwich plates with porosities, Composite Structures, 201, 2018, 38-48.
[56] Daikh, A.A., Zenkour, A.M., Effect of porosity on the bending analysis of various functionally graded sandwich plates, Materials Research Express, 6(6), 2019, 065703.
[57] Heshmati, M., Jalali, S.K., Effect of radially graded porosity on the free vibration behavior of circular and annular sandwich plates, European Journal of Mechanics-A/Solids, 74, 2019, 417-430.
[58] Keddouri, A., Hadji, L., Tounsi, A., Static analysis of functionally graded sandwich plates with porosities, Advances in Materials Research, 8(3), 2019, 155-177.
[59] Rahmani, M., Mohammadi, Y., Kakavand, F., Vibration analysis of different types of porous FG circular sandwich plates, ADMT Journal, 12(3), 2019, 63-75.
[60] Trinh, M.C., Nguyen, D.D., Kim, S.E., Effects of porosity and thermomechanical loading on free vibration and nonlinear dynamic response of functionally graded sandwich shells with double curvature, Aerospace Science and Technology, 87, 2019, 119-132.
[61] Adhikari, B., Dash, P., Singh, B.N., Buckling analysis of porous FGM sandwich plates under various types nonuniform edge compression based on higher order shear deformation theory, Composite Structures, 251, 2020, 112597.
[62] Hadji, L., Influence of the distribution shape of porosity on the bending of FGM beam using a new higher order shear deformation model, Smart Structures and Systems, 26(2), 2020, 253-262.
[63] Wang, Y., Zhou, A., Fu, T., Zhang, W., Transient response of a sandwich beam with functionally graded porous core traversed by a non-uniformly distributed moving mass, International Journal of Mechanics and Materials in Design, 16(3), 2020, 519-540.
[64] Zhang, Y., Jin, G., Chen, M., Ye, T., Yang, C., Yin, Y., Free vibration and damping analysis of porous functionally graded sandwich plates with a viscoelastic core, Composite Structures, 244, 2020, 112298.
[65] Li, Q., Iu, V.P., Kou, K.P, Three-dimensional vibration analysis of functionally graded material sandwich plates, Journal of Sound and Vibration, 311(1-2), 2008, 498-515.
[66] El Meiche, N., Tounsi, A., Ziane, N., Mechab, I., A new hyperbolic shear deformation theory for buckling and vibration of functionally graded sandwich plate, International Journal of Mechanical Sciences, 53(4), 2011, 237-247.
[67] Thai, H.T., Nguyen, T.K., Vo, T.P., Lee, J., Analysis of functionally graded sandwich plates using a new first-order shear deformation theory, European Journal of Mechanics-A/Solids, 45, 2014, 211-225.
)
