Journal of Applied and Computational Mechanics

Vibration of a Flexible Hanging Chain with a Mass on the End in a Nonstationary Regime of the Motion Mechanism in Hoisting Machines

Document Type : Research Paper

Authors

1 Department of Technical Mechanics and Machine Knowledge, University of Food Technologies, 26 Maritza Blvd., Plovdiv, 4002, Bulgaria

2 Institute of Mechanics, Bulgarian Academy of Sciences, Acad. G. Bontchev St., bl. 4, Sofia, 1113, Bulgaria

3 Department of Mechanics, University of Transport, Geo Milev St., 158, 1574 Sofia, Bulgaria

Abstract

The article is focused on the vibrations of a heavy chain with a mass on the end when the hoisting machines are in a nonstationary regime of motion, assuming that motor or brake torque is a linear function of the speed of the motion mechanism. An approach based on the application of approximate analytical solution of the system of differential equations of motion has been presented. The solution was obtained by two iterations based on the Fourier and small parameter methods, the representation of the motion of any point of the chain, and the intensity of the inertial perturbation forces by Eigenfunction series of the free vibration task. Our analytical results have been illustrated with a numerical example on the basis of the technical characteristics of the crane trolley and a visual Fortran computer program has been created.

Keywords

Main Subjects

Publisher’s Note Shahid Chamran University of Ahvaz remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

[1] Lurie, A.I., Analytical Mechanics, Springer-Verlag Berlin Heidelberg, 2002.
[2] De Silva, Clarence W., Vibration: fundamentals and practice, Boca Raton: CRC Press LLC, 2000.
[3] Leissa, A.W., Qatu, M.S., Vibrations of continuous systems, New York, McGraw Hill, 2011.
[4] Rao, S.S., Vibrations of continuous systems, John Wiley & Sons, 2007.
[5] Merkin, D.R., Introduction to mechanics of elastic chain, Moscow, Nauka, 1980.
[6] Svetlitsky, V.A., Mechanics of elastic rods and chains, Moscow, Machinostronie, 1978.
[7] Stepanov, A.G., Dynamics of machines, Yekaterinburg, UrO RAN, 1999.
[8] Smirnov, A.S., Degilevich E.A., Vibrations of chain systems, Saint Petersburg, Polytech-Press, 2021.
[9] Tohyama, M., Vibration of String and Wave Propagation, In: Sound and Signals. Signals and Communication Technology, Springer, Berlin, Heidelberg, 2011.
[10] Shcherbakov, V.P., Applied mechanics of the rope, Moscow, MGTU, 2001.
[11] Sandilo, S.H., Van Horssen, W.T., On variable length induced vibrations of a vertical string, Journal of Sound and Vibration, 333(11), 2014, 2432-2449.
[12] Smolnikov, B.A., Smirnov, A.S., String oscillations with internal friction, Modern mechanical engineering: Science and education, Saint Petersburg, Russia, Lecture Note in Modern Engineering: Science and Education, 192-203, 2021.
[13] Malyshev, A.P., Numerical modeling of the force’s nonlinear vibrations of a chain, Mechanics of a Solid Body, 5, 2008, 32-38 (in Russian).
[14] Islamova, O.A., Mathematical modeling of vibrations of the suspended heavy chain, News of SFU, 73(1), 2007, 204-209.
[15] Gadyl'shin, T.R., On the vibrations of a string with a concentrated mass and rapidly oscillating density, Comptes Rendus Mécanique, 343(9), 2015, 476-481.
[16] Markeev, A.P., The oscillations of a particle suspended on an ideal thread, Journal of Applied Mathematics and Mechanics, 60(2), 1996, 233-242.
[17] Stulov, A., Kartofelev D., Vibration of strings with nonlinear supports, Applied Acoustics, 76, 2014, 223-229.
[18] Perov, P., Johnson, W., Perova-Melloc, N., The physics of guitar string vibrations, American Journal of Physics, 84(1), 2016, 38-43.
[19] Abohamer, M.K., Awrejcewicz, J., Amer, T.S., Modeling and analysis of a piezoelectric transducer embedded in a nonlinear damped dynamical system, Nonlinear Dynamics, 111, 2023, 8217-8234.
[20] Abohamer, M.K., Awrejcewicz, J., Amer, T.S., Modeling of the vibration and stability of a dynamical system coupled with an energy harvesting device, Alexandria Engineering Journal, 63, 2023, 377-397.
[21] Abdelhfeez, S.A., Amer, T.S., Elbaz, R.F., Bek, M.A., Studying the influence of external torques on the dynamical motion and the stability of a 3DOF dynamic system, Alexandria Engineering Journal, 61, 2022, 6695-6724.
[22] Amer, W.S., Amer, T.S., Hassan, S.S., Modeling and stability analysis for the vibrating motion of three degrees of freedom dynamical system near resonance, Applied Sciences, 11, 2021, 11943.
[23] Abady, I.M., Amer, T.S., Gad, H.M., Bek, M.A., The asymptotic analysis and stability of 3DOF nonlinear damped rigid body pendulum near resonance, Ain Shams Engineering Journal, 13, 2022, 101554.
[24] Amer, W.S., Amer, T.S., Starosta, R., Bek, M.A., Resonance in the cart-pendulum system-an asymptotic approach, Applied Sciences, 11, 2021, 11567.
[25] Abohamer, M.K., Awrejcewicz, J., Starosta, R., Amer, T.S., Bek, M.A., Influence of the motion of a spring pendulum on energy-harvesting devices, Applied Sciences, 11, 2021, 8658.
[26] Aleksandrov, M.P., Load-lifting machines, Moscow, Publishing House of MSTU Bauman, 2000.
[27] Aleksandrov, M.P., et al., Load-lifting machines, Moscow, Machinostronie, 1986.
[28] Lobov, N.A., Dynamics of motion of cranes on a railway line, Moscow, Publishing House of MSTU Bauman, 2003.
[29] Bachvarov, St., Zlatanov, V., Nikolov, S., Dynamics of a traveling crane with load during braking regime, 10th Jubilee National Congress on Theoretical and Applied Mechanics, Varna, Bulgaria, 27-33, 2005.
[30] Zlatanov, V.D., Analytical investigation of mechanical systems, Academic Publishing House of AU Plovdiv, 2020.
[31] Panavko, Ia.G., Basses of the applied theory of the vibrations and blow, Leningrad, Machinostronie, 1976.
[32] Ilyin, M.M., Kolesnikov, K.S., Saratov, Y.S., Theory of vibrations, Moscow, Publishing House of MSTU Bauman, 2003.
[33] Zlatanov, V., Nikolov, S., Vibrations of a Chain in the Braking Regime of the Motion Mechanism in Load-Lifting Machines, Lecture Notes in Mechanical Engineering - Advances in Mechanical Engineering, Springer, 222-232, 2019.
Journal of Applied and Computational Mechanics

Articles in Press, Corrected Proof
Available Online from 22 April 2024