[1] Haug, E.J., Computer aided kinematics and dynamics of mechanical systems, volume 1, Allyn and Bacon Boston, 1989.
[2] Kaiser, I., Strano, S., Terzo, M., Tordela, C., Anti-yaw damping monitoring of railway secondary suspension through a nonlinear constrained approach integrated with a randomly variable wheel-rail interaction, Mechanical Systems and Signal Processing, 146, 2021, 107040.
[3] Marano, D., Cammarata, A., Fichera, G., Sinatra, R., Prati, D., Modeling of a three-axes mems gyroscope with feedforward pi quadrature compensation, in Advances on Mechanics, Design Engineering and Manufacturing: Proceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing (JCM 2016), 14-16 September, 2016, Catania, Italy, Springer, 2017, 71–80.
[4] Shabana, A.A., Dynamics of multibody systems, Cambridge university press, 2020.
[5] Kaiser, I., Strano, S., Terzo, M., Tordela, C., Estimation of the railway equivalent conicity under different contact adhesion levels and with no wheelset sensorization, Vehicle System Dynamics, 61, 2023, 19–37.
[6] Razmjooei, H., Palli, G., Abdi, E., Terzo, M., Strano, S., Design and experimental validation of an adaptive fast-finite-time observer on uncertain electro-hydraulic systems, Control Engineering Practice, 131, 2023, 105391.
[7] Cammarata, A., Sinatra, R., Rigato, R., Maddio, P.D., Tie-system calibration for the experimental setup of large deployable reflectors, Machines, 7, 2019, 23.
[8] Nikravesh, P.E., Computer-aided analysis of mechanical systems, Prentice-Hall, Inc., 1988.
[9] Calabrese, A., Spizzuoco, M., Galano, S., Tran, N., Strano, S., Terzo, M., A parametric study on the stability of fiber reinforced rubber bearings under combined axial and shear loads, Engineering Structures, 227, 2021, 111441.
[10] Cammarata, A., Sinatra, R., Rigano, A., Lombardo, M., Maddio, P.D., Design of a large deployable reflector opening system, Machines, 8, 2020, 7.
[11] Shabana, A.A., Computational continuum mechanics, John Wiley & Sons, 2018.
[12] Calabrese, A., Quaglini, V., Strano, S., Terzo, M., Online estimation of the friction coefficient in sliding isolators, Structural Control and Health Monitoring, 27, 2020, e2459.
[13] Swaminathan, N., Reddy, S.R.P., RajaShekara, K., Haran, K.S., Flying cars and evtols—technology advancements, powertrain architectures, and design, IEEE Transactions on Transportation Electrification, 8, 2022, 4105–4117.
[14] Rahman, N.A.A., Urban air transport and the future of tourism, in Contemporary Marketing and Consumer Behaviour in Sustainable Tourism, Routledge, 28–37, 2024.
[15] Straubinger, A., Rothfeld, R., Shamiyeh, M., Büchter, K.D., Kaiser, J., Plötner, K.O., An overview of current research and developments in urban air mobility–setting the scene for uam introduction, Journal of Air Transport Management, 87, 2020, 101852.
[16] Wang, L., Deng, X., Gui, J., Jiang, P., Zeng, F., Wan, S., A review of urban air mobility-enabled intelligent transportation systems: Mechanisms, applications and challenges, Journal of Systems Architecture, 102902.
[17] Coppola, P., De Fabiis, F., Silvestri, F., Urban air mobility (uam): Airport shuttles or city-taxis?, Transport Policy.
[18] Garrow, L.A., German, B.J., Leonard, C.E., Urban air mobility: A comprehensive review and comparative analysis with autonomous and electric ground transportation for informing future research, Transportation Research Part C: Emerging Technologies, 132, 2021, 103377.
[19] Radic, A., Quan, W., Ariza-Montes, A., Koo, B., Kim, J.J., Chua, B.L., Gil-Marín, M., Han, H., Do tourists dream of urban air mobility? psychology and the unified theory of acceptance and use of technology, Journal of China Tourism Research, 1–35.
[20] Cohen, A.P., Shaheen, S.A., Farrar, E.M., Urban air mobility: History, ecosystem, market potential, and challenges, IEEE Transactions on Intelligent Transportation Systems, 22, 2021, 6074–6087.
[21] Cummings, C., Mahmassani, H., Comparing urban air mobility network airspaces: Experiments and insights, Transportation Research Record, 2678, 2024, 440–454.
[22] Jin, Z., Ng, K.K., Zhang, C., Robust optimisation for vertiport location problem considering travel mode choice behaviour in urban air mobility systems, Journal of the Air Transport Research Society, 2, 2024, 100006.
[23] Takacs, A., Haidegger, T., Infrastructural requirements and regulatory challenges of a sustainable urban air mobility ecosystem, Buildings, 12, all Open Access, Gold Open Access, Green Open Access.
[24] Cokorilo, O., Urban air mobility: Safety challenges, volume 45, 2020, 21–29.
[25] Ahmed, S.S., Hulme, K.F., Fountas, G., Eker, U., Benedyk, I.V., Still, S.E., Anastasopoulos, P.C., The flying car—challenges and strategies toward future adoption, Frontiers in Built Environment, 6.
[26] Li, J., Cheng, H., Guo, H., Qiu, S., Survey on artificial intelligence for vehicles, Automotive Innovation, 1, 2018, 2–14.
[27] He, X., Lv, C., Towards safe autonomous driving: Decision making with observation-robust reinforcement learning, Automotive Innovation, 1–12.
[28] Pan, G., Alouini, M.S., Flying car transportation system: Advances, techniques, and challenges, IEEE Access, 9, 2021, 24586–24603.
[29] Straubinger, A., Rothfeld, R., Shamiyeh, M., Büchter, K.D., Kaiser, J., Plötner, K.O., An overview of current research and developments in urban air mobility – setting the scene for uam introduction, Journal of Air Transport Management, 87.
[30] Rother, E.T., Systematic literature review x narrative review, Acta paulista de enfermagem, 20, 2007, 5–6.
[31] NASA, Uam reference vehicles – sacd, 2023.
[32] Society, T.V.F., evtol aircraft directory, 2023.
[33] Garrow, L.A., German, B.J., Leonard, C.E., Urban air mobility: A comprehensive review and comparative analysis with autonomous and electric ground transportation for informing future research, Transportation Research Part C: Emerging Technologies, 132, 2021, 103377.
[34] Kiesewetter, L., Shakib, K.H., Singh, P., Rahman, M., Khandelwal, B., Kumar, S., Shah, K., A holistic review of the current state of research on aircraft design concepts and consideration for advanced air mobility applications, Progress in Aerospace Sciences, 142, 2023, 100949.
[35] A japanese “flying car” has successfully made its first test flight.
[36] B.V, P.V.I., Pal-v, 2018.
[37] Creedy, S., Boeing ’flying car’ completes first test flight, 2019.
[38] Courtney, W.S., You can buy the moller skycar flying car on ebay today...for 5 million dollars, 2017.
[39] Contributors, W., Terrafugia transition, 2019.
[40] Johnson, W., Rotorcraft Aeromechanics, Cambridge Aerospace Series, Cambridge University Press, 2013.
[41] Heathman, A., The pal-v liberty flying car is unveiled at the geneva motor show, 2018.
[42] Pradeep, P.,Wei, P., Energy-efficient arrival with rta constraint for multirotor evtol in urban air mobility, Journal of Aerospace Information Systems, 16, 2019, 263–277.
[43] Donateo, T., Ficarella, A., A modeling approach for the effect of battery aging on the performance of a hybrid electric rotorcraft for urban airmobility, Aerospace, 7.
[44] Saberi, H., Hasbun, M., Hong, J., Yeo, H., Ormiston, R., Overview of rcas capabilities, validations, and rotorcraft applications, Annual Forum Proceedings - AHS International, 2, 2015, 1315–1344.
[45] Shamiyeh, M., Rothfeld, R., Hornung, M., A performance benchmark of recent personal air vehicle concepts, 2018.
[46] Chauhan, S., Martins, J., Tilt-wing evtol takeoff trajectory optimization, Journal of Aircraft, 57, 2019, 93–112.
[47] Radotich, M.T., Conceptual Design of Two Tiltrotor Aircraft for Urban Air Mobility, Aeromechanics for Advanced Vertical Flight Technical Meeting 2022, 2022.
[48] Hall, E.J., Internal-combustion engine, 1919.
[49] Elmore, E., Scata, D., 2020 redac -uam/uas acoustics research status | federal aviation administration, 2020.
[50] Terrafugia reveals new details on transition flying car due in 2019, 2019.
[51] Rizzi, S.A., Urban Air Mobility Noise: Current Practice, Gaps, and Recommendations, NASA, 2020.
[52] Rizzi, S., Rafaelof, M., Community noise assessment of urban air mobility vehicle operations using the faa aviation environmental design tool, INTER-NOISE and NOISE-CON Congress and Conference Proceedings, 263, 2021, 450–461.
[53] Bian, H., Tan, Q., Zhong, S., Zhang, X., Assessment of uam and drone noise impact on the environment based on virtual flights, Aerospace Science and Technology, 118, 2021, 106996.
[54] Mathur, A., Panesar, K., Kim, J., Atkins, E., Sarter, N., Ballin, M., Goodrich, K., Paths to autonomous vehicle operations for urban air mobility, 2019.
[55] Palli, G., Strano, S., Terzo, M., A novel adaptive-gain technique for high-order sliding-mode observers with application to electro-hydraulic systems, Mechanical Systems and Signal Processing, 144, 2020, 106875.
[56] Yang, X., Wei, P., Autonomous free flight operations in urban air mobility with computational guidance and collision avoidance, IEEE Transactions on Intelligent Transportation Systems, PP, 2021, 1–14.
[57] Gandelli, E., Lomiento, G., Quaglini, V., Strano, S., Terzo, M., Tordela, C., Estimation of the instantaneous friction coefficients of sliding isolators subjected to bi-directional orbits through a nonlinear state observer, Engineering Structures, 249, 2021, 113374.
[58] Galano, S., Calabrese, A., Losanno, D., Serino, G., Strano, S., Tuning the lateral response of unbonded fiber reinforced elastomeric isolators (u-freis) through horizontal holes: Experimental and numerical findings, Composite Structures, 289, 2022, 115454.
[59] Hang, E., Ehang | uam - passenger autonomous aerial vehicle (aav).
[60] Aerofugia, Aerofugia aerofugia.
[61] Al Haddad, C., Chaniotakis, E., Straubinger, A., Plötner, K., Antoniou, C., Factors affecting the adoption and use of urban air mobility, Transportation Research Part A: Policy and Practice, 132, 2020, 696–712.
[62] Aeromobil, 2019.
[63] Rendón, M.A., Sánchez R., C.D., Gallo M., J., Anzai, A.H., Aircraft hybrid-electric propulsion: Development trends, challenges and opportunities, Journal of Control, Automation and Electrical Systems, 32, 2021, 1244–1268.
[64] Aeronautics, U., Urban aeronautics | evtol | real flying cars | fancraft technology.
[65] Sawday, J., Engines of the imagination: Renaissance culture and the rise of the machine, Engines of the Imagination: Renaissance Culture and the Rise of the Machine, 1–402.
[66] Ackroyd, J., Sir george cayley, the father of aeronautics. part 1. the invention of the aeroplane, Notes and Records of The Royal Society - NOTES REC ROY SOC, 56, 2002, 167–181.
[67] Ackroyd, J., Sir george cayley, the father of aeronautics part 2. cayley’s aeroplanes, Notes and Records of The Royal Society - NOTES REC ROY SOC, 56, 2002, 333–348.
[68] Anderson, J.D., Fundamentals of aerodynamics, Mcgraw Hill Education, 2017.
[69] Editors, H., Wright brothers, 2009.
[70] Allen, J.E., Armstrong, F.W., Denning, R.M., Evolution of aviation and propulsion systems: The next fifty years, Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 209, 1995, 15–33.
[71] Sinigaglia, T., Martins, M., Siluk, J., Technological evolution of internal combustion engine vehicle: A patent data analysis, Applied Energy, 306, 2022, 118003.
[72] Upham, P., Maughan, J., Raper, D., Al, E., Towards sustainable aviation, Earthscan Publications, 2003.
[73] Rogers, E.W.E., Aerodynamics — retrospect and prospect, The Aeronautical Journal, 86, 1982, 43–67.
[74] von Karman, T., The Wind and Beyond: Theodore Von Karman, Pioneer in Aviation and Pathfinder in Space, Plunkett Lake Press, 1967.
[75] Prandtl, L., Theory of Lifting Surfaces, 1920.
[76] Anderson, J., A history of aerodynamics: And its impact on flying machines.
[77] Goldstein, S., Fluid mechanics in the first half of this century, Annual Review of Fluid Mechanics, 1, 2003, 1–29.
[78] Bissell, C., A History of Automatic Control, Springer Berlin Heidelberg, Berlin, Heidelberg, 53–69, 2009.
[79] Cierva c.8, 2023.
[80] Elliot, D., Rotary wing aircraft, 1938.
[81] Stalker, E., Rotary wing aircraft, 1949.
[82] Howard, R.W., Automatic flight controls in fixed wing aircraft–the first 100 years, The Aeronautical Journal, 77, 1973, 533–562.
[83] Grum, J., Book review: Fundamentals of composites manufacturing, materials, methods and applications, International Journal of Microstructure and Materials Properties, 2.
[84] Ashkenazi, D., How aluminum changed the world: A metallurgical revolution through technological and cultural perspectives, Technological Forecasting and Social Change, 143, 2019, 101–113.
[85] Soutis, C., Fibre reinforced composites in aircraft construction, Progress in Aerospace Sciences, 41, 2005, 143–151.
[86] Marshall, D.M., Barnhart, R.K., Shappee, E., Most, M., Introduction to unmanned aircraft systems, Crc Press, 3rd edition edition, 2016.
[87] Pavek, K., Albus, J., Messina, E., Autonomy levels for unmanned systems (alfus) framework: An update, Proceedings of SPIE - The International Society for Optical Engineering.
[88] Melvin, S., Gyroscopic apparatus, 1943.
[89] Carlson, B., Automatic pilot, 1940.
[90] Eduard, F., Johannes, T., Control apparatus for vehicles, 1940.
[91] Choueiri, E.Y., A critical history of electric propulsion: The first 50 years (1906-1956), Journal of propulsion and power, 20, 2004, 193–203.
[92] Sanghi, V., Lakshmanan, B., Sundararajan, V., Survey of advancements in jet-engine thermodynamic simulation, Journal of Propulsion and Power, 16, 2000, 797–807.
[93] Moran, T.H., Mowery, D.C., Aerospace, Daedalus, 120, 1991, 135–154.
[94] Aspinwall, R.H., Baker, C.R., Jet propulsion, uS Patent 4,137,708, 1979.
[95] Lancaster, O.E., Jet propulsion engines, volume 2247, Princeton University Press, 2015.
[96] Ballal, D.R., Zelina, J., Progress in aeroengine technology (1939–2003), Journal of aircraft, 41, 2004, 43–50.
[97] Al-Lami, H., Aslam, A., Quigley, T., Lewis, J., Mercer, R., Shukla, P., The evolution of flight control systems, Technology Development, System Architecture and Operation.
[98] Cousins, W.T., History, philosophy, physics, and future directions of aircraft propulsion system/inlet integration, in Turbo Expo: Power for Land, Sea, and Air, volume 41677, 2004, 305–320.
[99] Engineering:ave mizar - handwiki.
[100] Lebouder autoplane, 2022.
[101] Greene, D.L., Energy-efficiency improvement potential of commercial aircraft, Annual review of energy and the environment, 17, 1992, 537–573.
[102] Chambers, J.R., Innovation in flight: research of the NASA Langley Research Center on revolutionary advanced concepts for aeronautics, volume 4539, National Aeronautics and Space Administration, 2005.
[103] Lee, J., Mo, J., Analysis of technological innovation and environmental performance improvement in aviation sector, International Journal of Environmental Research and Public Health, 8, 2011, 3777–3795.
[104] Kroo, I., Drag due to lift: concepts for prediction and reduction, Annual review of fluid mechanics, 33, 2001, 587–617.
[105] Cone, J.C.D., Minimum induced drag airfoil body, uS Patent 3,270,988, 1966.
[106] Prencipe, A., Breadth and depth of technological capabilities in cops: the case of the aircraft engine control system, Research Policy, 29, 2000, 895–911.
[107] Scott, A.J.,The aerospace-electronics industrial complex of southern california: The formative years, 1940–1960, Research Policy, 20, 1991, 439–456.
[108] Steinberg, R., Aircraft operating efficiency on the north atlantic, a challenge for the 1980’s, NASA. Langley Research Center The 1980 Aircraft Safety and Operating Probl., Pt. 2.
[109] Valavanis, K.P., Advances in unmanned aerial vehicles: state of the art and the road to autonomy.
[110] Asundi, A., Choi, A.Y., Fiber metal laminates: an advanced material for future aircraft, Journal of Materials Processing Technology, 63, 1997, 384–394.
[111] Vogelesang, L.B., Development of a new hybrid material (arall) for aircraft structures, Industrial & Engineering Chemistry Product Research and Development, 22, 1983, 492–496.
[112] Cooper, M.G., Elliott, E.M., Hartzell, D.A., Autopilot flight director system, uS Patent 4,644,538, 1987.
[113] Ruffier, F., Franceschini, N., Optic flow regulation: the key to aircraft automatic guidance, Robotics and Autonomous Systems, 50, 2005, 177–194.
[114] Rauschelbach, P., Aircraft automatic flight control system, uS Patent 3,848,833, 1974.
[115] M. Sabri, M., Danapalasingam, K., Rahmat, M., A review on hybrid electric vehicles architecture and energy management strategies, Renewable and Sustainable Energy Reviews, 53, 2016, 1433 – 1442.
[116] Friedrich, C., Robertson, P.A., Hybrid-electric propulsion for aircraft, Journal of Aircraft, 52, 2015, 176–189.
[117] Wheeler, P., Sirimanna, T.S., Bozhko, S., Haran, K.S., Electric/hybrid-electric aircraft propulsion systems, Proceedings of the IEEE, 109, 2021, 1115–1127.
[118] Fredericks, W.J., Moore, M.D., Busan, R.C., Benefits of hybrid-electric propulsion to achieve 4x cruise efficiency for a vtol uav, in 2013 International Powered Lift Conference, 2013, 4324.
[119] Oosedo, A., Abiko, S., Konno, A., Koizumi, T., Furui, T., Uchiyama, M., Development of a quad rotor tail-sitter vtol uav without control surfaces and experimental verification, 2013, 317 – 322.
[120] Ahmad, S., Chipperfield, A., Tokhi, M., Dynamic modelling and optimal control of a twin rotor mimo system, volume 1, 2000, 391–398.
[121] Kraenzler, M., Schmitt, M., Stumpf, E., Conceptual design study on electrical vertical takeoff and landing aircraft for urban air mobility applications, 2019, 1–12.
[122] Fumian, F., Di Giovanni, D., Martellucci, L., Rossi, R., Gaudio, P., Application of miniaturized sensors to unmanned aerial systems, a new pathway for the survey of polluted areas: Preliminary results, Atmosphere, 11, 2020, 471.
[123] Silva, C., Johnson, W.R., Solis, E., Patterson, M.D., Antcliff, K.R., Vtol urban air mobility concept vehicles for technology development, in 2018 Aviation Technology, Integration, and Operations Conference, 2018, 3847.
[124] Parveez, B., Kittur, M., Badruddin, I.A., Kamangar, S., Hussien, M., Umarfarooq, M., Scientific advancements in composite materials for aircraft applications: a review, Polymers, 14, 2022, 5007.
[125] Valavanis, K.P., Unmanned aircraft systems challenges in design for autonomy, in 2017 11th International Workshop on Robot Motion and Control (RoMoCo), IEEE, 2017, 73–86.
[126] Nakagawa, S., Samarasinghe, G., Haddaway, N.R., Westgate, M.J., O’Dea, R.E., Noble, D.W., Lagisz, M., Research weaving: Visualizing the future of research synthesis, Trends in Ecology & Evolution, 34, 2019, 224–238.
[127] Linnenluecke, M., Marrone, M., Singh, A., Conducting systematic literature reviews and bibliometric analyses, Australian Journal of Management, 45, 2019, 175–194.
[128] Cook, D., Mulrow, C., Haynes, b., Systematic reviews: Synthesis of best evidence for clinical decisions, Annals of Internal Medicine, 126, 1997, 376–80.
[129] Orlova, A., Titova, T., Analysis of the ‘dynamics of railway vehicles’ research field development using scientometric approach, Vehicle System Dynamics, 59, 2021, 1148–1169.
[130] D, T., Denyer, D., Smart, P., Towards a methodology for developing evidence-informed management knowledge means of systematic review.
[131] Xiao, Y., Watson, M., Guidance on conducting a systematic literature review, Journal of Planning Education and Research, 39, 2019, 93–112.
[132] Moher, D., Liberati, A., Tetzlaff, J., Altman, D.G., Preferred reporting items for systematic reviews and meta-analyses: The prisma statement, International Journal of Surgery, 8, 2010, 336–341.
[133] Aria, M., Cuccurullo, C., bibliometrix: An r-tool for comprehensive science mapping analysis, Journal of Informetrics, 11, 2017, 959–975.
[134] Kasliwal, A., Furbush, N.J., Gawron, J.H., McBride, J.R., Wallington, T.J., De Kleine, R.D., Kim, H.C., Keoleian, G.A., Role of flying cars in sustainable mobility, Nature Communications, 10.
[135] Rajashekara, K., Wang, Q., Matsuse, K., Challenges and propulsion strategies, IEEE Electrification Magazine, 4, 2016, 46–57.
[136] Postorino, M.N., Sarné, G.M., Reinventing mobility paradigms: Flying car scenarios and challenges for urban mobility, Sustainability (Switzerland), 12.
[137] Ahmed, S.S., Fountas, G., Eker, U., Still, S.E., Anastasopoulos, P.C., An exploratory empirical analysis of willingness to hire and pay for flying taxis and shared flying car services, Journal of Air Transport Management, 90.
[138] Luo, Y., Qian, Y., Zeng, Z., Zhang, Y., Simulation and analysis of operating characteristics of power battery for flying car utilization, eTransportation, 8, 2021, 100111.
[139] Shi, X., Yang, C., Jiayang, X., Liang, C., Chen, J., Anti-drone system with multiple surveillance technologies: Architecture, implementation, and challenges, IEEE Communications Magazine, 56, 2018, 68–74.
[140] Graydon et al supra note 120.
[141] Bacchini, A., Cestino, E., Electric vtol configurations comparison, Aerospace, 6, 2019, 26.
[142] Eker, U., Fountas, G., Anastasopoulos, P.C., Still, S.E., An exploratory investigation of public perceptions towards key benefits and concerns from the future use of flying cars, Travel Behaviour and Society, 19, 2020, 54–66.
[143] Trancossi, M., Dumas, A., Madonia, M., Subhash, M., Pascoa, J., Das, S., Grimaccia, F., Bingham, C., Smith, T., Vucinic, D., et al., Preliminary implementation study of acheon thrust and vector electrical propulsion on a stol light utility aircraft, Technical report, SAE Technical Paper, 2015.
[144] Uber elevate.
[145] Abidin, A., Mansor, H., Ahmad, R., Abdullah, R., Chung, I., The estimation of carbon dioxide emissions from the transport sector in malaysia (2000–2020) for national institute for environmental studies, in 9th Asian Pacific Integrated Model (AIM) Workshop, Kuala Lumpur, Malaysia, 2004.
[146] Collareno, K., The flight path to transportation equity: How legislators can ensure that urban air mobility delivers inclusive transportation services, U. Ill. L. Rev., 639.
[147] Stanley, M., Are flying cars preparing for takeoff?
[148] Ariffin, R.N.R., Zahari, R.K., The challenges of implementing urban transport policy in the klang valley, malaysia, Procedia Environmental Sciences, 17, 2013, 469–477.
[149] Bansal, P., Kockelman, K.M., Singh, A., Assessing public opinions of and interest in new vehicle technologies: An austin perspective, Transportation Research Part C: Emerging Technologies, 67, 2016, 1–14.
[150] Manrique, C., Pappalardo, C., Guida, D., On the analytical and computational methodologies for modelling two-wheeled vehicles within the multibody dynamics framework: A systematic literature review, Journal of Applied and Computational Mechanics, 8, 2022, 153-181.
[151] Romano, L., Sakhnevych, A., Strano, S., Timpone, F., A hybrid tyre model for in-plane dynamics, Vehicle System Dynamics, 2020, doi: 10.1080/00423114.2019.1608365.
[152] Genovese, A., Strano, S., Terzo, M., Design and multi-physics optimization of an energy harvesting system integrated in a pneumatic suspension, Mechatronics, 69, 2020, 102395.
[153] Siegel, S., Seidel, J., Cohen, K., McLaughlin, T., A cycloidal propeller using dynamic lift, in 37th AIAA Fluid Dynamics Conference and Exhibit, 2007, 4232.
[154] Hanson, D.B., Compressible helicoidal surface theory for propeller aerodynamics and noise, AIAA Journal, 21, 1983, 881–889.
[155] Li, D., Design of a new vtol uav by combining cycloidal blades and fanwing propellers, 2013.
[156] Shao, Y., Liu, L., Xu, Z., Design of four ducted fan-type electric vertical take-off and landing flying car, 2022.
[157] Trancossi, M., Hussain, M., Shivesh, S., Pascoa, J., A new vtol propelled wing for flying cars: Critical bibliographic analysis, SAE Technical Papers, Part F129883.
[158] Reba, I., Applications of the coanda effect, Scientific American, 214, 1966, 84–93.
[159] Mihara, Y., Nakamura, T., Nakamoto, A., Nakano, M., Airframe design optimization and simulation of a flying car for medical emergencies, International Journal of Automation Technology, 16, 2022, 183 – 196, all Open Access, Gold Open Access.
[160] Shi, X., Kim, K., Rahili, S., Chung, S.J., Nonlinear control of autonomous flying cars with wings and distributed electric propulsion, volume 2018-December, 2018, 5326 – 5333, cited by: 19; All Open Access, Green Open Access.
[161] Ai, T., Xu, B., Xiang, C., Fan, W., Zhang, Y., Modeling and multimode analysis of electrically driven flying car, 2020, 1565–1571.
[162] Demirdžic, I., Peric, M., Finite volume method for prediction of fluid flow in arbitrarily shaped domains with moving boundaries, International Journal for Numerical Methods in Fluids, 10, 1990, 771–790.
[163] Gomi, R., Takii, A., Yamakawa, M., Asao, S., Takeuchi, S., Nishimura, M., Flight simulation from takeoff to yawing of evtol airplane with coaxial propellers by fluid-rigid body interaction, Advances in Aerodynamics, 5.
[164] Takii, A., Gomi, R., Yamakawa, M., Tsubokura, M., Turning flight simulation with fluid-rigid body interaction for flying car with contra-rotating propellers, Lecture Notes in Computer Science (including subseries Lecture Notes in Artificial Intelligence and Lecture Notes in Bioinformatics), 14073 LNCS, 2023, 566 – 577.
[165] Fresca, S., Manzoni, A., Pod-dl-rom: Enhancing deep learning-based reduced order models for nonlinear parametrized pdes by proper orthogonal decomposition, Computer Methods in Applied Mechanics and Engineering, 388, 2022, 114181.
[166] Peters, N., Silva, C., Ekaterinaris, J., A data-driven reduced-order model for rotor optimization, Wind Energy Science, 8, 2023, 1201 – 1223.
[167] Pardede, W.M., Adhitya, M., Take off and landing performance analysis for a flying car model using wind tunnel test method, volume 2227, 2020.
[168] Liu, M., Hao, H., Lin, Z., He, X., Qian, Y., Sun, X., Geng, J., Liu, Z., Zhao, F., Flying cars economically favor battery electric over fuel cell and internal combustion engine, PNAS Nexus, 2.
[169] Calabrese, A., Losanno, D., Barjani, A., Spizzuoco, M., Strano, S., Effects of the long-term aging of glass-fiber reinforced bearings (frbs) on the seismic response of a base-isolated residential building, Engineering Structures, 221, 2020, 110735.
[170] Calabrese, A., Gandelli, E., Quaglini, V., Strano, S., Terzo, M., Tordela, C., Monitoring of hysteretic friction degradation of curved surface sliders through a nonlinear constrained estimator, Engineering Structures, 226, 2021, 111371.
[171] Romli, F.I., Yaakob, M.S., Personal air vehicle (pave) application in malaysia, 2014, 59–64.
[172] Kish, B.A., Wilde, M., Silver, I., Wheeler, B., Cleveland, A., Reppen, K., Flight test comparison of three air vehicles flying urban air mobility mission trajectories, volume 2022-March, 2022.
[173] Secanell, M., Wishart, J., Dobson, P., Computational design and optimization of fuel cells and fuel cell systems: A review, Journal of Power Sources, 196, 2011, 3690–3704.
[174] Yang, C., Lu, Z., Wang, W., Wang, M., Zhao, J., An efficient intelligent energy management strategy based on deep reinforcement learning for hybrid electric flying car, Energy, 280.
[175] Prandini, M., Piroddi, L., Puechmorel, S., Brazdilova, S.L., Toward air traffic complexity assessment in new generation air traffic management systems, IEEE transactions on intelligent transportation systems, 12, 2011, 809–818.
[176] Mondoloni, S., Rozen, N., Aircraft trajectory prediction and synchronization for air traffic management applications, Progress in Aerospace Sciences, 119, 2020, 100640.
[177] Ghayouraneh, S., El-Ghazaly, S.M., Rankin, J.M., Dynamic addressing for on-demand mobility, 2018.
[178] Saeed, N., Al-Naffouri, T.Y., Alouini, M.S., Wireless communication for flying cars, Frontiers in Communications and Networks, 2.
[179] Alsamhi, S.H., Ansari, M.S., Ma, O., Almalki, F., Gupta, S.K., Tethered balloon technology in design solutions for rescue and relief team emergency communication services, Disaster Medicine and Public Health Preparedness, 13, 2019, 203–210.
[180] Pu, C., Jamming-resilient multipath routing protocol for flying ad hoc networks, IEEE Access, PP, 2018, 1–1.
[181] Guvenc, I., Koohifar, F., Singh, S., Sichitiu, M., Matolak, D., Detection, tracking, and interdiction for amateur drones, IEEE Communications Magazine, 56, 2018, 75–81.
[182] Shane, S., Sanger, D.E., Drone crash in iran reveals secret us surveillance effort, The New York Times, 7.
[183] Humphreys, T., Statement on the vulnerability of civil unmanned aerial vehicles and other systems to civil gps spoofing, Technical Report, University of Texas at Austin, 2012.
[184] Elakrat, M.A., Jung, J.C., Development of field programmable gate array–based encryption module to mitigate man-in-the-middle attack for nuclear power plant data communication network, Nuclear Engineering and Technology, 50, 2018, 780–787.
[185] Wang, L., Wyglinski, A.M., Detection of man-in-the-middle attacks using physical layer wireless security techniques, Wireless Communications and Mobile Computing, 16, 2016, 408–426.
[186] Europol, How can dos attacks paralyse the internet, 2018.
[187] Kamkar, S., Skyjack, 2013.
[188] Tewes, J., Cybersecurity as airworthiness, available at SSRN 3033898.
[189] Tang, A.C., A review on cybersecurity vulnerabilities for urban air mobility, volume 1 PartF, 2021, 1–17.
[190] Ritchie, H., Roser, M., Rosado, P., Co2 and greenhouse gas emissions, Our world in data.
[191] Oertel, C., Matschullat, J., Zurba, K., Zimmermann, F., Erasmi, S., Greenhouse gas emissions from soils—a review, Geochemistry, 76, 2016, 327–352.
[192] Afonso, F., Ferreira, A., Ribeiro, I., Lau, F., Suleman, A., On the design of environmentally sustainable aircraft for urban air mobility, Transportation Research Part D: Transport and Environment, 91, 2021, 102688.
[193] Mudumba, S., Chao, H., Maheshwari, A., DeLaurentis, D., Crossley, W., Modeling co2 emissions from trips using urban air mobility and emerging automobile technologies, Transportation Research Record: Journal of the Transportation Research Board, 2675, 2021, 036119812110064.
[194] André, N., Sustainable design of electric vertical take-off and landing aircraft for urban air mobility, 2022.
[195] Prakasha, P.S., et al., Urban air mobility vehicle and fleet-level life-cycle assessment using a system-of-systems approach, in AIAA Aviation 2021 Forum, 2021, 2457.
[196] Zhang, T., Barakos, G.N., Furqan, Foster, M., High-fidelity aerodynamic and acoustic design and analysis of a heavy-lift evtol, Aerospace Science and Technology, 137, 2023, 108307.
[197] Little, D.S., Majdalani, J., Hartfield, R.J., Ahuja, V., On the prediction of noise generated by urban air mobility (uam) vehicles. i. integration of fundamental acoustic metrics, Physics of Fluids, 34, 2022, 116117.
[198] Hara, S., Takahara, K., Mitsukura, Y., Stress evaluation using eeg for novel air mobilities, 2022, 72–73.
[199] Glaab, P., Wieland, F., Santos, M., Sharma, R., Tamburro, R., Lee, P.U., Simulating fleet noise for notional uam vehicles and operations in new york, in 2019 IEEE/AIAA 38th Digital Avionics Systems Conference (DASC), 2019, 1–10.
[200] Ahmed, S.S., Fountas, G., Eker, U., Anastasopoulos, P.C., Are we willing to relocate with the future introduction of flying cars? an exploratory empirical analysis of public perceptions in the united states, Transportmetrica A: Transport Science, 18, 2022, 1025–1052.
[201] Birrell, S., Payre, W., Zdanowicz, K., Herriotts, P., Urban air mobility infrastructure design: Using virtual reality to capture user experience within the world’s first urban airport, Applied Ergonomics, 105.
[202] Yavas, V., Tez, Ö.Y., Consumer intention over upcoming utopia: Urban air mobility, Journal of Air Transport Management, 107.
[203] Administration, F.A., Aeronautical information publication - aip, faa, accessed 10 January 2024, 2023.
[204] Lascara, B., Lacher, A., DeGarmo, M., Maroney, D., Niles, R., Vempati, L., Urban air mobility airspace integration concepts, The Mitre Corportation.
[205] Raymer, D.P., Aircraft Design: A Conceptual Approach, AIAA Education Series, AIAA, Reston, VA, 5th edition, 2012.
[206] Raymer, D.P., French, J., Finger, D.F., Gomez, A., Singh, J., Pillai, R.G., Monjon, M.M., Marcos de Souza, J., Levy, A., The raymer manned mars airplane: A conceptual design and feasibility study, in AIAA Scitech 2021 Forum, 2021, 1187.
[207] Roskam, J., Airplane Design: Part V, Component Weight Estimation, Roskam Aviation and Engineering Corporation, Ottawa, KS, 1989.
[208] Fuentes, G., Ceron-Munoz, H., Parra, J., Design of an advanced turboprop aircraft for regional operations with ninety passengers, in 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, 2013, 24.
[209] Benini, E., Significance of blade element theory in performance prediction of marine propellers, Ocean Engineering, 31, 2004, 957–974.
[210] Mahmuddin, F., Rotor blade performance analysis with blade element momentum theory, Energy Procedia, 105, 2017, 1123–1129, 8th International Conference on Applied Energy, ICAE2016, 8-11 October 2016, Beijing, China.
[211] Benini, E., Toffolo, A., Optimal design of horizontal-axis wind turbines using blade-element theory and evolutionary computation, J. Sol. Energy Eng., 124, 2002, 357–363.
[212] Ledoux, J., Riffo, S., Salomon, J., Analysis of the blade element momentum theory, SIAM Journal on Applied Mathematics, 81, 2021, 2596–2621.
[213] Cavcar, M., Breguet range equation?, Journal of Aircraft - J AIRCRAFT, 43, 2006, 1542–1544.
[214] Hu, P., kan Chang, C., Research on optimize application of buckingham pi theorem to wind tunnel test and its aerodynamic simulation verification, Journal of Physics: Conference Series, 1507, 2020, 082047.
[215] Wang, Z., Huang, W., Yan, L., Multidisciplinary design optimization approach and its application to aerospace engineering, Chinese science bulletin, 59, 2014, 5338–5353.
[216] Martins, J.R., Lambe, A.B., Multidisciplinary design optimization: a survey of architectures, AIAA journal, 51, 2013, 2049–2075.
[217] Comis Da Ronco, C., Ponza, R., Benini, E., Aerodynamic shape optimization of aircraft components using an advanced multi-objective evolutionary approach, Computer Methods in Applied Mechanics and Engineering, 285, 2015, 255–290.
[218] Spalart, P.R., Venkatakrishnan, V., On the role and challenges of cfd in the aerospace industry, The Aeronautical Journal, 120, 2016, 209–232.
[219] Dong, Y., Tao, J., Zhang, Y., Lin, W., Ai, J., Deep learning in aircraft design, dynamics, and control: Review and prospects, IEEE Transactions on Aerospace and Electronic Systems, 57, 2021, 2346–2368.
[220] Federal Aviation Administration, Federal aviation administration, https://www.faa.gov/, 2024.
[221] European Union Aviation Safety Agency, Regulations, https://www.easa.europa.eu/en/regulations, 2024.
[222] Allen, J.G., Coates, G., Trevelyan, J., A hyper-heuristic approach to aircraft structural design optimization, Structural and Multidisciplinary Optimization, 48, 2013, 807–819.
[223] Sadraey, M., A systems engineering approach to unmanned aerial vehicle design, in 10th AIAA Aviation Technology, Integration, and Operations (ATIO) Conference, AIAA, 2010, 9302.
[224] Sadraey, M., Unmanned Aircraft Design: A Review of Fundamentals, 2017.
[225] Desai, Y., Ali, J., Rhoades, C., Ayers, A., Madani, M., De Backer, W., Design and prototype of an autonomous uav, in 2024 Regional Student Conferences, 2024, 85574.
[226] Quan, Q., Introduction to multicopter design and control, Springer, 2017.
[227] Cammarata, A., Pappalardo, C.M., On the use of component mode synthesis methods for the model reduction of flexible multibody systems within the floating frame of reference formulation, Mechanical Systems and Signal Processing, 142, 2020, 106745.
[228] Pappalardo, C.M., La Regina, R., Guida, D., Multibody modeling and nonlinear control of a pantograph scissor lift mechanism, Journal of Applied and Computational Mechanics, 9, 2023, 129–167.
[229] Pappalardo, C.M., Lök, S.I., Malgaca, L., Guida, D., Experimental modal analysis of a single-link flexible robotic manipulator with curved geometry using applied system identification methods, Mechanical Systems and Signal Processing, 200, 2023, 110629.
[230] Ravindran, S.S., A reduced-order approach for optimal control of fluids using proper orthogonal decomposition, International Journal for Numerical Methods in Fluids, 34, 2000, 425–448.
Journal of Applied and Computational Mechanics
