Analysis of Structural Responses of a Horizontal Axis Wind Turbine at Maximum Aerodynamic Performance

Document Type : Research Paper

Authors
Ahmed TAIBAOUI 1
Tahar BENMESSAOUD 2
Cheikh KEZRANE 1
1 Laboratory of Development in Mechanics and Materials (LDMM) - University of Djelfa, 17000, Algeria
2 Renewable Energy Systems Applications Laboratory (LASER), Faculty of Science and Technology, Ziane Achour University, Djelfa 17000, Algeria
10.22055/jacm.2025.48025.4922
Abstract
This numerical analysis investigates the interplay between fluid dynamics and structural mechanics within a horizontal axis wind turbine. Tip speeds ranging from 1 to 8.1 are explored, focusing on blade structural responses at maximum aerodynamic coefficient across Young's modulus values. Visual representations of absolute pressure and velocity magnitude highlight a significant velocity gradient at the minimum tip speed ratio, contrasting with the maximum aerodynamic coefficient case. Examination of relative wind speed vectors uncovers predicted flow separation near the blade's trailing edge at the minimum tip speed ratio. However, for the highest tip-speed ratio, airflow remains attached to the blade across all radial positions. Radial deformation patterns show increasing blade deformation from centre to tip, diminishing with higher Young's modulus. Von Mises stress analysis identifies maximum values at the blade-hub junction and midpoint of the blades, decreasing with increasing Young's modulus values.  Blade tip deflection variation over time reveals initial oscillations followed by stability, with decreasing blade tip deflection values as Young's modulus values increase. A comparison between One-way and Two-way Fluid Structure Interaction simulations indicates higher blade tip deflection values in the Two-way simulations. with a maximum percentage difference of 8.21% observed at the minimum Young's modulus case (5×108 Pa).
Keywords
Horizontal Axis wind turbine
Fluid dynamics
Structural responses
Young's modulus
One-way and two-way fluid structure interaction simulations
Subjects

Publisher’s Note Shahid Chamran University of Ahvaz remains neutral with regard to jurisdictional claims in published maps and institutional affiliations.

[1] Stoevesandt, B., Schepers, G., Fuglsang, P., Sun, Y., Handbook of wind energy aerodynamics, Springer Nature, 2022.
[2] Bai, C.-J., Wang, W.-C., Review of computational and experimental approaches to analysis of aerodynamic performance in horizontal-axis wind turbines (HAWTs), Renewable and Sustainable Energy Reviews, 63, 2016, 506-519.
[3] Tummala, A., Velamati, R.K., Sinha, D.K., Indraja, V., Krishna, V.H., A review on small scale wind turbines, Renewable and Sustainable Energy Reviews, 56, 2016, 1351-1371.
[4] Rajamohan, S., Vinod, A., Aditya, M.P.V.S., Vadivudaiyanayaki, H.G., Arıcı, M., Nižetic, S., et al., Approaches in performance and structural analysis of wind turbines–A review, Sustainable Energy Technologies and Assessments, 53, 2022, 102570.
[5] Lipian, M., Czapski, P., Obidowski, D., Fluid–structure interaction numerical analysis of a small, urban wind turbine blade, Energies, 13(7), 2020, 1832.
[6] Roul, R., Kumar, A., Fluid-structure interaction of wind turbine blade using four different materials: numerical investigation, Symmetry, 12(9), 2020, 1467.
[7] Wang, L., Quant, R., Kolios, A., Fluid structure interaction modelling of horizontal-axis wind turbine blades based on CFD and FEA, Journal of Wind Engineering and Industrial Aerodynamics, 158, 2016, 11-25.
[8] Huque, Z., Zemmouri, F., Lu, H., Kommalapati, R.R., Fluid–Structure Interaction Simulations of Wind Turbine Blades with Pointed Tips, Energies, 17(5), 2024, 1090.
[9] Li, W., Xiong, Y., Su, G., Ye, Z., Wang, G., Chen, Z., The aerodynamic performance of horizontal axis wind turbines under rotation condition, Sustainability, 15(16), 2023, 12553.
[10] Shi, F., Wang, Z., Zhang, J., Gong, Z., Guo, L., Influences of wind and rotating speed on the fluid-structure interaction vibration for the offshore wind turbine blade, Journal of Vibroengineering, 21(2), 2019, 483-497.
[11] Thangavelu, S.K., Chow, S.F., Sia, C.C.V., Chong, K.H., Aeroelastic performance analysis of horizontal axis wind turbine (HAWT) swept blades, Materials Today: Proceedings, 47, 2021, 4965-4972.
[12] Alfonsi, G., Reynolds-averaged Navier–Stokes equations for turbulence modeling, Applied Mechanics Reviews, 62(4), 2009, 040802.
[13] Nichols, R.H., Turbulence Models and Their Application to Complex Flows, University of Alabama at Birmingham, 4, 2010, 89.
[14] Schaffarczyk, A.P., Introduction to wind turbine aerodynamics, Springer Nature, 2020.
[15] Jones, D.R.H., Ashby, M.F., Elastic Moduli, Engineering Materials, Chapter 3, Fifth Edition, Butterworth-Heinemann, 2019.
[16] Krogstad, P.Å., Lund, J., An experimental and numerical study of the performance of a model turbine, Wind Energy, 15(3), 2012, 443-457.
[17] ANSYS, I., Ansys fluent user’s guide, 2022R1, Ansys Fluent User’s Guide, 2022.
[18] Manwell, J.F., McGowan, J.G., Rogers, A.L., Wind energy explained: theory, design and application, John Wiley & Sons, 2010.                
Journal of Applied and Computational Mechanics
Volume 12, Issue 1
Winter 2026
Pages 155-163