[1] Ahmed, S.S., Hulme, K.F., Fountas, G., Eker, U., Benedyk, I.V., Still, S.E., Anastasopoulos, P.C., The flying car—challenges and strategies toward future adoption, Frontiers in Built Environment, 6, 2020, 106.
[2] Yang, C., Lu, Z., Wang, W., Li, Y., Chen, Y., Xu, B., Energy management of hybrid electric propulsion system: Recent progress and a flying car perspective under three-dimensional transportation networks, Green Energy and Intelligent Transportation, 2(1), 2023, 100061.
[3] Ahmed, S.S., Fountas, G., Eker, U., Still, S.E., Anastasopoulos, P.C., An exploratory empirical analysis of willingness to hire and pay for flying taxis and shared flying car services, Journal of Air Transport Management, 90, 2021, 101963.
[4] Aláez, D., Olaz, X., Prieto, M., Villadangos, J., Astrain, J.J., Vtol uav digital twin for take-off, hovering and landing in different wind conditions, Simulation Modelling Practice and Theory, 123, 2023, 102703.
[5] Pukhova, A., Llorca, C., Moreno, A., Staves, C., Zhang, Q., Moeckel, R., Flying taxis revived: Can urban air mobility reduce road congestion?, Journal of Urban Mobility, 1, 2021, 100002.
[6] Stopher, P.R., Reducing road congestion: a reality check, Transport policy, 11(2), 2004, 117–131.
[7] Duranton, G., Turner, M.A., The fundamental law of road congestion: Evidence from us cities, American Economic Review, 101(6), 2011, 2616–2652.
[8] Padrón, J.D., Hernández-Orallo, E., Calafate, C.T., Soler, D., Cano, J.C., Manzoni, P., Realistic traffic model for urban environments based on induction loop data, Simulation modelling practice and theory, 125, 2023, 102742.
[9] Yan, Y., Wang, K., Qu, X., Urban air mobility (uam) and ground transportation integration: A survey, Frontiers of Engineering Management, 11(4), 2024, 734–758.
[10] Pan, G., Alouini, M.S., Flying car transportation system: Advances, techniques, and challenges, IEEE Access, 9, 2021, 24586–24603.
[11] Choudhary, C., Aastha, Saini, G.K., Kunal, Saxena, M., Evaluation of potential flying cars, 2023 2nd International Conference for Innovation in Technology (INOCON), 1–5.
[12] Bando, M., Hasebe, K., Nakayama, A., Shibata, A., Sugiyama, Y., Dynamical model of traffic congestion and numerical simulation, Physical Review E, 51(2), 1995, 1035.
[13] Arnott, R., Rave, T., Schöb, R., Alleviating urban traffic congestion, MIT Press Books, 1, 2005.
[14] Postorino, M.N., Sarné, G.M., Reinventing mobility paradigms: Flying car scenarios and challenges for urban mobility, Sustainability, 12(9), 2020, 3581.
[15] Marzouk, O.A., Urban air mobility and flying cars: Overview, examples, prospects, drawbacks, and solutions, Open Engineering, 12(1), 2022, 662–679.
[16] Evans, L., Frick, M.C., Schwing, R.C., Is it safer to fly or drive?, Risk Analysis, 10(2), 1990, 239–246.
[17] Rajashekara, K., Wang, Q., Matsuse, K., Flying cars: Challenges and propulsion strategies, IEEE Electrification Magazine, 4(1), 2016, 46–57.
[18] Shi, X., Kim, K., Rahili, S., Chung, S.J., Nonlinear control of autonomous flying cars with wings and distributed electric propulsion, 2018 IEEE Conference on Decision and Control (CDC), 5326–5333.
[19] Kasliwal, A., Furbush, N.J., Gawron, J.H., McBride, J.R., Wallington, T.J., De Kleine, R.D., Kim, H.C., Keoleian, G.A., Role of flying cars in sustainable mobility, Nature communications, 10(1), 2019, 1555.
[20] Bashir, N., Boudjit, S., Dauphin, G., Zeadally, S., An obstacle avoidance approach for uav path planning, Simulation modelling practice and theory, 129, 2023, 102815.
[21] Zohdi, T., On the dynamics and breakup of quadcopters using a discrete element method framework, Computer Methods in Applied Mechanics and Engineering, 327, 2017, 503–521.
[22] Al-Madani, B., Svirskis, M., Narvydas, G., Maskeliunas, R., Damasevicius, R., Design of fully automatic drone parachute system with temperature compensation mechanism for civilian and military applications, Journal of Advanced Transportation, 2018(1), 2018, 2964583.
[23] Xu, D., Hui, Z., Liu, Y., Chen, G., Morphing control of a new bionic morphing uav with deep reinforcement learning, Aerospace science and technology, 92, 2019, 232–243.
[24] Marano, D., Cammarata, A., Fichera, G., Sinatra, R., Prati, D., Modeling of a three-axes mems gyroscope with feedforward pi quadrature compen-sation, Advances on Mechanics, Design Engineering and Manufacturing: Proceedings of the International Joint Conference on Mechanics, Design Engineering & Advanced Manufacturing (JCM 2016), 14-16 September, 2016, Catania, Italy, Springer, 71–80.
[25] Hu, L., Yan, X., Yuan, Y., Development and challenges of autonomous electric vertical take-off and landing aircraft, Heliyon, 11(1), 2025.
[26] Bustos, A., Rubio, H., Soriano-Heras, E., Castejon, C., Methodology for the integration of a high-speed train in maintenance 4.0, Journal of Computational Design and Engineering, 8(6), 2021, 1605–1621.
[27] Wilkinson, T.L., Load distribution among bolts parallel to load, Journal of structural engineering, 112(4), 1986, 835–852.
[28] Li, C.C., Doucet, C., Performance of d-bolts under dynamic loading, Rock mechanics and rock engineering, 45(2), 2012, 193–204.
[29] Nikravesh, S.M.Y., Goudarzi, M., A review paper on looseness detection methods in bolted structures, Latin American Journal of Solids and Structures, 14(12), 2017, 2153–2176.
[30] Bickford, J., Handbook of Bolts and bolted Joints, MarcelDekker, 1998.
[31] Vlase, S., Marin, M., Iuliu, N., Finite element method-based elastic analysis of multibody systems: a review, Mathematics, 10(2), 2022, 257.
[32] Widiyanto, I., Sutimin, S., Laksono, F.B., Prabowo, A.R., Structural assessment of monocoque frame construction using finite element analysis: A study case on a designed vehicle chassis referring to ford gt40, Procedia Structural Integrity, 33, 2021, 27–34.
[33] Lee, S.H., A cad–cae integration approach using feature-based multi-resolution and multi-abstraction modelling techniques, Computer-Aided Design, 37(9), 2005, 941–955.
[34] Pappalardo, C.M., Lettieri, A., Guida, D., Identification of a dynamical model of the latching mechanism of an aircraft hatch door using the numerical algorithms for subspace state-space system identification, IAENG International Journal of Applied Mathematics, 51(2), 2021, 1–14.
[35] Pappalardo, C.M., Manca, A.G., Guida, D., A combined use of the multibody system approach and the finite element analysis for the structural redesign and the topology optimization of the latching component of an aircraft hatch door., IAENG International Journal of Applied Mathematics, 51(1), 2021.
[36] Zhang, H., Wang, L., Liu, Y., A hybrid model-based and data-driven method for mechanical-thermal dynamic load identification considering multi-source uncertainties, Computer Methods in Applied Mechanics and Engineering, 435, 2025, 117662.
[37] Pappalardo, C.M., Curcio, M., Guida, D., Modeling the longitudinal flight dynamics of a fixed-wing aircraft by using a multibody system approach., IAENG International Journal of Computer Science, 50(1), 2023.
[38] Eker, U., Ahmed, S.S., Fountas, G., Anastasopoulos, P.C., An exploratory investigation of public perceptions towards safety and security from the future use of flying cars in the united states, Analytic methods in accident research, 23, 2019, 100103.
[39] Pérez Carrera, C., Genel, Ö.E., La Regina, R., Pappalardo, C.M., Guida, D., A comprehensive and systematic literature review on flying cars in contemporary research, Journal of Applied and Computational Mechanics, 11(3), 2025, 642–666.
[40] Sorgonà, O., Cirelli, M., Giannini, O., Verotti, M., Comparison of flexibility models for the multibody simulation of compliant mechanisms, Multi-body System Dynamics, 63(3), 2025, 453–474.
[41] Gao, F., Li, J., Sun, G., Efficient and accurate flexible multibody dynamics modeling for complex spacecraft with integrated control applications, Acta Astronautica, 219, 2024, 818–825.
[42] Ortiz, M., Leroy, Y., Needleman, A., A finite element method for localized failure analysis, Computer methods in applied mechanics and engineering, 61(2), 1987, 189–214.
[43] Ardila-Parra, S.A., Pappalardo, C.M., Estrada, O.A.G., Guida, D., Finite element based redesign and optimization of aircraft structural components using composite materials, IAENG International Journal of Applied Mathematics, 50(4), 2020.
[44] Sarcar, M., Rao, K.M., Narayan, K.L., Computer aided design and manufacturing, PHI Learning Pvt. Ltd., 2008.
[45] Chen, F., Mac, G., Gupta, N., Security features embedded in computer aided design (cad) solid models for additive manufacturing, Materials & Design, 128, 2017, 182–194.
[46] Bandler, J.W., Optimization methods for computer-aided design, IEEE Transactions on Microwave Theory and Techniques, 17(8), 1969, 533–552.
[47] Fontana, C., Cappetti, N., Three-dimensional reconstruction of the right ventricle from a radial basis morphing of the inner surface, Computation, 12(11), 2024, 216.
[48] Pérez Bayas, M.A., Cely, J., Sintov, A., García Cena, C.E., Saltaren, R., Method to develop legs for underwater robots: From multibody dynamics with experimental data to mechatronic implementation, Sensors, 22(21), 2022.
[49] Kennard, R.W., Stone, L.A., Computer aided design of experiments, Technometrics, 11(1), 1969, 137–148.
[50] Louhichi, B., Abenhaim, G.N., Tahan, A.S., Cad/cae integration: updating the cad model after a fem analysis, The International Journal of Advanced Manufacturing Technology, 76(1), 2015, 391–400.
[51] Chiu, W., Tan, S., Multiple material objects: from cad representation to data format for rapid prototyping, Computer-Aided Design, 32(12), 2000, 707–717.
[52] Schutte, A., Udwadia, F., New approach to the modeling of complex multibody dynamical systems, Journal of Applied Mechanics, 78(2), 2010, 021018.
[53] Kim, H., Lee, H., Lee, K., Cho, H., and, M.C., Efficient flexible multibody dynamic analysis via improved c0 absolute nodal coordinate formulation-based element, Mechanics of Advanced Materials and Structures, 29(25), 2022, 4125–4137.
[54] Zhou, Z., Xu, Y., and, G.X., Dynamics for rigid–flexible coupled solar panel multibody system composed of composite laminated plates, Mechanics of Advanced Materials and Structures, 0(0), 2024, 1–15.
[55] Cammarata, A., Maddio, P.D., Sinatra, R., Tian, Y., Zhao, Y., Xi, F., Elastostatic analysis of a module-based shape morphing snake-like robot, Mechanism and Machine Theory, 194, 2024, 105580.
[56] Dietz, S., Netter, H., Sachau, D., Fatigue life predictions by coupling finite element and multibody systems calculations, Proceedings of the ASME 1997 Design Engineering Technical Conferences, 1–9, paper No. DETC97/VIB-4229.
[57] Braccesi, C., Cianetti, F., Landi, L., Random loads fatigue: The use of spectral methods within multibody simulation, Proceedings of the ASME 2005 International Design Engineering Technical Conferences, 1735–1745.
[58] Giesbers, J., Contact mechanics in msc adams - a technical evaluation of the contact models in multibody dynamics software msc adams, 2012.
[59] Schuderer, M., Rill, G., Schaeffer, T., Schulz, C., Friction modeling from a practical point of view, Multibody System Dynamics, 63(1), 2025, 141–158.
[60] Cammarata, A., Sinatra, R., Rigato, R., Maddio, P.D., Tie-system calibration for the experimental setup of large deployable reflectors, Machines, 7(2), 2019, 23.
[61] Dhatt, G., Lefrançois, E., Touzot, G., Finite element method, John Wiley & Sons, 2012.
[62] Bouzidi, I., Hadjoui, A., and, A.F., Dynamic analysis of functionally graded rotor-blade system using the classical version of the finite element method, Mechanics Based Design of Structures and Machines, 49(7), 2021, 1080–1108.
[63] Akgun, F., A finite element model for analyzing horizontal well bha behavior, Journal of Petroleum Science and Engineering, 42(2), 2004, 121–132, petroleum Exploration and Production Research in the Middle East.
[64] Pappalardo, C.M., Magaldi, T., Masucci, L., La Regina, R., Naddeo, A., Virtual prototyping, multibody dynamics, and control design of an adaptive lift table for material handling, Journal of Applied and Computational Mechanics, 10(4), 2024, 659–693.
[65] Louhichi, B., Aifaoui, N., Hamdi, M., Abdelmajid, B., An optimization-based computational method for surface fitting to update the geometric information of an existing b-rep cad..., International Journal of CAD/CAM, 9(1), 2009, 17–24.
[66] Hamed, A.M., Jayakumar, P., Letherwood, M.D., Gorsich, D.J., Recuero, A.M., Shabana, A.A., Ideal Compliant Joints and Integration of Computer Aided Design and Analysis, Journal of Computational and Nonlinear Dynamics, 10(2), 2015, 021015.
[67] Wu, D., Zheng, A., Yu, W., Cao, H., Ling, Q., Liu, J., Zhou, D., Digital twin technology in transportation infrastructure: a comprehensive survey of current applications, challenges, and future directions, Applied Sciences, 15(4), 2025, 1911.
[68] De Simone, M.C., Veneziano, S., Porcaro, A., Guida, D., Design of experiments approach for structural optimization of urban air mobility vehicles, Actuators, 14, 2025, 176.
[69] Foucault, G., Cuillière, J.C., François, V., Léon, J.C., Maranzana, R., Adaptation of cad model topology for finite element analysis, Computer-Aided Design, 40(2), 2008, 176–196.
[70] Stolt, R., A cad-integrated system for automated idealization of cad-models for finite element analysis, International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, vol. 4739, 457–466.
[71] GCR, N., Cost analysis of inadequate interoperability in the us capital facilities industry, National Institute of Standards and Technology (NIST), 2004, 223–253.
[72] Cottrell, J.A., Hughes, T.J., Bazilevs, Y., Isogeometric analysis: toward integration of CAD and FEA, John Wiley & Sons, 2009.
[73] Ji, A.M., Zhu, K., Huang, J.C., Dong, Y.P., Cad/cae integration system of mechanical parts, Advanced Materials Research, 338, 2011, 272–276.
[74] Mounir, H., Nizar, A., Abdelmajid, B., Cad model simplification using a removing details and merging faces technique for a fem simulation, Journal of mechanical science and technology, 26(11), 2012, 3539–3548.
[75] Tierney, C., Nolan, D., Robinson, T., Armstrong, C., Using mesh-geometry relationships to transfer analysis models between cae tools, Engineering with Computers, 31(3), 2015, 465–481.
[76] Hamed, A.M., Jayakumar, P., Letherwood, M.D., Gorsich, D.J., Recuero, A.M., Shabana, A.A., Ideal compliant joints and integration of computer aided design and analysis, Journal of Computational and Nonlinear Dynamics, 10(2), 2015, 021015.
[77] Lian, H., Bordas, S., Sevilla, R., Simpson, R., Recent developments in cad/analysis integration, arXiv preprint arXiv:1210.8216, 2012.
[78] Bayas, M.P., Andrade, G.N., Arroba, S.M.A., Carrión, J.G., Kinetic analysis of an ankle rehabilitator composed of two parallel delta robots, Proceedings of CLAWAR 2018: 21st International Conference on Climbing and Walking Robots and the Support Technologies for Mobile Machines, 89–97.
[79] Braccesi, C., Landi, L., Scaletta, R., New dual meshless flexible body methodology for multi-body dynamics: Simulation of generalized moving loads, Proceedings of The Institution of Mechanical Engineers Part K-journal of Multi-body Dynamics - PROC INST MECH ENG K-J MUL D, 218, 2004, 51–62.
[80] Villecco, F., On the evaluation of errors in the virtual design of mechanical systems, Machines, 6(3), 2018, 36.
[81] Kashem, M.A., Shamsuddoha, M., Nasir, T., Sustainable transportation solutions for intelligent mobility: A focus on renewable energy and technological advancements for electric vehicles (evs) and flying cars, Future Transportation, 4(3), 2024, 874–890.
[82] Arabshahi, S., Barton, D., Shaw, N., Steps towards cad-fea integration, Engineering with Computers, 9(1), 1993, 17–26.
[83] Sanborn, G.G., Shabana, A.A., On the integration of computer aided design and analysis using the finite element absolute nodal coordinate formulation, Multibody System Dynamics, 22(2), 2009, 181–197.
[84] Zhang, L., Le, B., Akhtar, N., Lam, S.K., Ngo, D., Large language models for computer-aided design: A survey, ACM Computing Surveys, 58(9), 2026, 1–39.
[85] Cuillière, J.C., Francois, V., Integration of cad, fea and topology optimization through a unified topological model, Computer-Aided Design and Applications, 11(5), 2014, 493–508.
[86] Perrella, M., Armentani, E., Lamanna, G., Berardi, V.P., Effect of fracture energy estimation on the predictions of mode ii behavior of bonded joints using cohesive zone models, Fracture and Structural Integrity, 19(72), 2025, 236–246.
[87] Cricrì, G., Perrella, M., Berardi, V.P., Identification of cohesive zone model parameters based on interface layer displacement field of bonded joints, Fatigue & Fracture of Engineering Materials & Structures, 45(3), 2022, 821–833.
[88] Perrella, M., Berardi, V., Cricrì, G., A novel methodology for shear cohesive law identification of bonded reinforcements, Composites Part B: Engineering, 144, 2018, 126–133.
[89] Saxena, A., Sahay, B., Computer Aided Engineering Design, Springer, New York, NY, 2005th ed., 2005.
[90] Piegl, L., Tiller, W., The NURBS Book, Monographs in Visual Communication, Springer, Berlin, Germany, 2nd ed., 1996.
[91] Shabana, A.A., Dynamics of multibody systems, Cambridge university press, 2020.
[92] Pappalardo, C.M., Guida, D., On the computational methods for solving the differential-algebraic equations of motion of multibody systems, Machines, 6(2), 2018, 20.
[93] Zienkiewicz, O.C., Taylor, R.L., Zhu, J.Z., The finite element method: Its basis and fundamentals, The Finite Element Method, Butterworth-Heinemann, Oxford, England, 7th ed., 2013.
[94] Rao, S.S., The finite element method in engineering, Elsevier, 2010.
[95] Li, S., Shen, Y., Liu, B., Chao, X., He, S., Feng, G., Aerodynamic design and analysis of an aerial vehicle module for split-type flying cars in urban transportation, Aerospace, 12(10), 2025, 871.
[96] Shao, H., Kan, Z., Wang, Y., Li, D., Yao, Z., Xiang, J., Dynamic analysis and numerical simulation of arresting hook engaging cable in carried-based uav landing process, Drones, 7(8), 2023, 530.
[97] Xie, A., Yan, X., Liang, W., Zhu, S., Chen, Z., Large-sized multirotor design: Accurate modeling with aerodynamics and optimization for rotor tilt angle, Drones, 7(10), 2023, 614.
[98] Zhang, T., Grzelak, D., Zhao, W., Islam, M.A., Fricke, H., Assmann, U., A review on the construction, modeling, and consistency of digital twins for advanced air mobility applications, Drones, 9(6), 2025, 394.
[99] Villecco, F., Pellegrino, A., Evaluation of uncertainties in the design process of complex mechanical systems, Entropy, 19(9), 2017, 475.
[100] XPENG, Xpeng x2 completes first global public flight in dubai, 2022, official company news release.
[101] Federal Aviation Administration, 14 CFR § 27.303 – Factor of Safety, 2026, electronic Code of Federal Regulations, Alternate reference: FAR 27.303, Accessed: 2026-05-13.
[102] Bickford, J.H., Introduction to the Design and Behavior of Bolted Joints: Non-Gasketed Joints, CRC Press, 4th ed., 2007.
[103] Lurie, A.I., Theory of elasticity, Springer Science & Business Media, 2010.
[104] Virgamet, 38hn3m, 39nicrmo3, 1.6510, 38ncd4, 39nicrmos3, 38nicrmo4 alloy steel, 2024, accessed: 20-Oct-2024.
[105] Williams, M., Structures: theory and analysis, Bloomsbury Publishing, 2020.
[106] MatWeb, Aluminum 7075-t6, 2024, available online at https://www.matweb.com, datasheet for Aluminum 7075-T6, accessed 20 Oct 2024.
[107] MathWorks, Simscape multibody, 2024, available online: https://es.mathworks.com/products/simscape-multibody.html, accessed 20 Oct 2024.
[108] Davidson, M., Graunke, R., Green, A., Haelsig, H., Heinemann, L., Antony Jose, S., Menezes, P.L., Carbon fiber-reinforced polymer matrix composites: Processing, properties, and applications, Fibers, 14(3), 2026, 29.
[109] Zhu, Y., Zhang, Y., Xiang, L., Crack propagation behavior modeling of bonding interface in composite materials based on cohesive zone method, Buildings, 15(10), 2025, 1717.
[110] Alnomani, S.N., Hunain, M.B., Alhumairee, S.H., Investigation of different failure theories for a lamina of carbon fiber/epoxy matrix composite materials, Journal of Engineering Science and Technology, 15(2), 2020, 846–857.
Journal of Applied and Computational Mechanics