A

  • Abadian, Fateme Electromechanical Performance of NEMS Actuator Fabricated from Nanowire under quantum vacuum fluctuations using GDQ and MVIM [Volume 3, Issue 2, 2017, Pages 125-134]
  • Abbdel-Naeem, Shereen Multiscale Numerical Modeling of Solute Transport with Two-‎Phase Flow in a Porous Cavity [Volume 7, Issue 2, 2021, Pages 396-403]
  • Abbès, Boussad A FEM Multiscale Homogenization Procedure using Nanoindentation for High Performance Concrete [Volume 6, Issue 3, 2020, Pages 493-504]
  • Abbès, Boussad Finite Element and Experimental Investigation on the Effect of ‎Repetitive Shock in Corrugated Cardboard Packaging [Volume 7, Issue 2, 2021, Pages 820-830]
  • Abbès, Fazilay A FEM Multiscale Homogenization Procedure using Nanoindentation for High Performance Concrete [Volume 6, Issue 3, 2020, Pages 493-504]
  • Abbès, Fazilay Finite Element and Experimental Investigation on the Effect of ‎Repetitive Shock in Corrugated Cardboard Packaging [Volume 7, Issue 2, 2021, Pages 820-830]
  • Abbondanza, Dario Linear dynamic response of nanobeams accounting for higher gradient effects [Volume 2, Issue 2, 2016, Pages 54-64]
  • Abboudi, Said Numerical Study on Heat Transfer and Pressure Drop in a Mini-‎Channel with Corrugated Walls‎ [Volume 7, Issue 3, 2021, Pages 1306-1314]
  • Abboudi, Said Impact of the Narrowing System at Different Locations and ‎Heights on the Performance of a Plane Solar Collector [Volume 8, Issue 4, 2022, Pages 1445-1455]
  • Abd Alaal, Faisal E.I. Numerical Investigations of the Coupled Nonlinear Non-homogeneous Partial Differential Equations [Volume 8, Issue 3, 2022, Pages 1054-1064]
  • Abd-Alhameed, Raed A Haar Wavelet Collocation Method for Thermal Analysis of Porous Fin with Temperature-dependent Thermal Conductivity and Internal Heat Generation [Volume 3, Issue 3, 2017, Pages 185-191]
  • Abd-Alhameed, Raed Thermal Analysis of Convective-Radiative Fin with Temperature-Dependent Thermal Conductivity Using Chebychev Spectral Collocation Method [Volume 4, Issue 2, 2018, Pages 87-94]
  • Abdali, Sajad H. Automatic Structural Synthesis of Planetary Geared Mechanisms ‎using Graph Theory [Volume 9, Issue 2, 2023, Pages 384-403]
  • Abdali, Sajad H. The Structural Synthesis of Non-fractionated, Three-degree-of-freedom Planetary Gear Mechanisms [Volume 10, Issue 1, 2024, Pages 205-223]
  • Abdalla, Bahaaeldin Unsteady Separated Stagnation Point Flow of Nanofluid past a ‎Moving Flat Surface in the Presence of Buongiorno's Model [Volume 7, Issue 3, 2021, Pages 1283-1290]
  • Abdalla, Hassan Mohamed Abdelalim Direct Transcription Approach to Dynamic Optimization Problems in Engineering [Volume 8, Issue 2, 2022, Pages 605-616]
  • Abd Elazem, Nader Y. Gold Nanoparticles’ Morphology Affects Blood Flow near a Wavy Biological Tissue Wall: An Application for Cancer Therapy [Volume 10, Issue 2, 2024, Pages 342-356]
  • Abd Elazem, Nader Y. Efficacy of a Modulated Viscosity-dependent Temperature/nanoparticles Concentration Parameter on a ‎Nonlinear Radiative Electromagneto-nanofluid Flow along an Elongated Stretching Sheet [Volume 9, Issue 3, 2023, Pages 848-860]
  • Abdelmoumen Anis, Bousahla Buckling Analysis of Embedded Nanosize FG Beams Based on a Refined Hyperbolic Shear Deformation Theory [Volume 4, Issue 3, 2018, Pages 140-146]
  • Abd Hamid, Fatin Numerical Simulation of Fuzzy Volterra Integro-differential ‎Equation using Improved Runge-Kutta Method [Volume 9, Issue 1, 2023, Pages 72-82]
  • Abdul Gaffar, S. Viscoelastic Micropolar Convection Flows from an Inclined Plane with Nonlinear Temperature: A Numerical Study [Volume 6, Issue 2, 2020, Pages 183-199]
  • Abdul Gaffar, Shaik Melting Heat Transfer Analysis on Magnetohydrodynamics Buoyancy Convection in an Enclosure: A Numerical Study [Volume 6, Issue 1, 2020, Pages 52-62]
  • Abdul Gaffar, Shaik Polymeric Dissipative Convection Flow from an Inclined Plane with Chemical Reaction: Numerical Study [Volume 8, Issue 2, 2022, Pages 416-428]
  • Abdul Hakeem, A.K. Slip Effects on Ohmic Dissipative Non-Newtonian Fluid Flow in the Presence of Aligned Magnetic Field [Volume 6, Issue 2, 2020, Pages 296-306]
  • Abdul Hakeem, A.K. Three Dimensional Non-linear Radiative Nanofluid Flow over a Riga Plate [Volume 6, Issue 4, 2020, Pages 1012-1029]
  • Abdul Hakeem, A.K. Heat Transfer of Hybrid-nanofluids Flow Past a Permeable Flat Surface with Different Volume Fractions [Volume 8, Issue 1, 2022, Pages 21-35]
  • Abedanzadeh, Amir Economic Evaluation of Supplying Commercial Thermal Load by ‎a New CPVT System: A Case Study in Iran [Volume 9, Issue 2, 2023, Pages 371-383]
  • Abid, Chérifa Conjugate Mixed Convection in a Horizontal Cylindrical Duct under the Solid Shell Internal Heat Generation [Volume 7, Issue 2, 2021, Pages 587-597]
  • Abid, Mohamed Nonlinear Biodynamic Models of the Hand-arm System and ‎Parameters Identification using the Vibration Transmissibility or ‎the Driving-point Mechanical Impedance [Volume 7, Issue 2, 2021, Pages 944-955]
  • Abikan, Adam Computational Analysis of Turbulent Flow over a Bluff Body with ‎Drag Reduction Devices [Volume 6, Special Issue, 2020, Pages 1210-1219]
  • Abilkhair, Zhastalap Computational and Experimental Study of the Composite ‎Material for the Centrifugal Pump Impellers Manufacturing [Volume 8, Issue 4, 2022, Pages 1407-1421]
  • Abo-bakr, Rasha M. Static Buckling of 2D FG Porous Plates Resting on Elastic ‎Foundation based on Unified Shear Theories‎ [Volume 9, Issue 1, 2023, Pages 239-258]
  • Abo-Bakr, Ali Mohammed Ali On the Dynamics of the Logistic Delay Differential Equation with ‎Two Different Delays [Volume 7, Issue 2, 2021, Pages 442-449]
  • Abolhasani, Hormoz Twin Screw Expanders Profile Optimization Using Surrogate-‎Based Modelling [Volume 8, Issue 4, 2022, Pages 1141-1153]
  • Aborehab, Ali Miscellaneous Modeling Approaches and Testing of a Satellite Honeycomb Sandwich Plate [Volume 6, Special Issue, 2020, Pages 1084-1097]
  • Abouelregal, Ahmed Fractional Thermoelasticity Model of a 2D Problem of Mode-I Crack in a Fibre-Reinforced Thermal Environment [Volume 5, Issue 2, 2019, Pages 269-280]
  • Abouelregal, Ahmed Thermoelastic Vibration of Temperature-Dependent Nanobeams Due to Rectified Sine Wave Heating—A State Space Approach [Volume 5, Issue 2, 2019, Pages 299-310]
  • Abouelregal, Ahmed On Green and Naghdi Thermoelasticity Model without Energy Dissipation with Higher Order Time Differential and Phase-Lags [Volume 6, Issue 3, 2020, Pages 445-456]
  • Abouelregal, Ahmed Influence of Temperature Pulse on a Nickel Microbeams under Couple Stress Theory [Volume 6, Issue 4, 2020, Pages 777-787]
  • Abouelregal, Ahmed E. Thermoelastic Memory-dependent Responses to an Infinite Medium ‎with a Cylindrical Hole and Temperature-dependent Properties [Volume 7, Issue 2, 2021, Pages 870-882]
  • Abouelregal, Ahmed E. Thermoelastic Model with Higher-order Time-derivatives and Two Phase-lags for an Infinitely Long Cylinder under Initial Stress and Heat Source [Volume 7, Issue 1, 2021, Pages 277-291]
  • Abouelregal, Ahmed E. A Modified Thermoelastic Fractional Heat Conduction Model ‎with a Single-Lag and Two Different Fractional-Orders [Volume 7, Issue 3, 2021, Pages 1676-1686]
  • Abouelregal, Ahmed E. Thermoelastic Vibrations of Nonlocal Nanobeams Resting on a ‎Pasternak Foundation via DPL Model [Volume 7, Issue 1, 2021, Pages 34-44]
  • Aboutalebi, Mohammad Numerical Study on the Ferrofluid Droplet Splitting in a T-junction ‎with Branches of Unequal Widths using Asymmetric Magnetic Field‎ [Volume 9, Issue 2, 2023, Pages 357-370]
  • Abro, Kashif Ali Application of Atangana-Baleanu Fractional Derivative to ‎Carbon Nanotubes Based Non-Newtonian Nanofluid: ‎Applications in Nanotechnology [Volume 6, Special Issue, 2020, Pages 1260-1269]
  • Abtahi Mehrjardi, Seyed Ali Heat Transfer Improvement in a Thermal Energy Storage System ‎using Auxiliary Fluid Instead of Nano-PCM in an Inclined ‎Enclosure: A Comparative Study [Volume 9, Issue 2, 2023, Pages 475-486]
  • Abu-Hamdeh, Nidal MHD Double-Diffusive Natural Convection in a Closed Space ‎Filled with Liquid Metal: Mesoscopic Analysis [Volume 7, Issue 3, 2021, Pages 1448-1465]
  • Acho, Leonardo Predictive Control with Dynamic Hysteresis ‎Reference ‎Trajectory: Application to a Structural Base-‎Isolation ‎Model [Volume 7, Special Issue, 2021, Pages 1242-1251]
  • Adda Bedia, El Abbes Buckling Analysis of Embedded Nanosize FG Beams Based on a Refined Hyperbolic Shear Deformation Theory [Volume 4, Issue 3, 2018, Pages 140-146]
  • Addessi, Daniela Computational Enhancement of a Mixed 3D Beam Finite Element with Warping and Damage [Volume 8, Issue 1, 2022, Pages 260-281]
  • Adelaja, Adekunle Study of the Vibration Characteristics of SA 330 Helicopter Planetary Main Gearbox [Volume 9, Issue 4, 2023, Pages 1093-1106]
  • Adeleye, Olurotimi A. Dynamic Analysis of the Biomechanical Model of Head Load Impact Using Differential Transform Method [Volume 6, Issue 4, 2020, Pages 893-907]
  • Adeosun, Taofeeq A. Influence of Thermophysical Features on MHD Squeezed Flow of ‎Dissipative Casson Fluid with Chemical and Radiative Effects [Volume 7, Issue 4, 2021, Pages 1999-2009]
  • Adesanya, S.O. A Note on the Hydromagnetic Blasius Flow with Variable Thermal Conductivity [Volume 7, Issue 4, 2021, Pages 1925-1930]
  • Afshar, Omid Moving Least Squares Method and its Improvement: A Concise Review [Volume 7, Issue 2, 2021, Pages 883-889]
  • A G, Vijayakumar Effects of Thermal Diffusion and Radiation on Magnetohydrodynamic (MHD) Chemically Reacting Fluid Flow Past a Vertical Plate in a Slip Flow Regime [Volume 5, Issue 2, 2019, Pages 334-343]
  • Agarwal, Praveen Performance Analysis of Segmentation of Hyperspectral Images Based on Color Image Segmentation [Volume 3, Issue 2, 2017, Pages 144-149]
  • Agarwal, Ravi P. On Approximate Stationary Radial Solutions for a Class of Boundary Value Problems Arising in Epitaxial Growth Theory [Volume 6, Issue 4, 2020, Pages 713-734]
  • Agarwal, Ravi P. A Novel Approach to Compute the Numerical Solution of Variable Coefficient Fractional Burgers' Equation with Delay [Volume 7, Issue 3, 2021, Pages 1550-1564]
  • Agarwal, Ravi P. A New Taylor Series based Numerical Method: Simple, Reliable, and Promising [Volume 9, Issue 4, 2023, Pages 1122-1134]
  • Aghadavoudi, Farshid Nanostructure, Molecular Dynamics Simulation and Mechanical Performance of PCL Membranes Reinforced with Antibacterial Nanoparticles [Volume 7, Issue 4, 2021, Pages 1907-1915]
  • Agwa, Mohamed Vibration Analysis of Material Size-Dependent CNTs Using Energy Equivalent Model [Volume 4, Issue 2, 2018, Pages 75-86]
  • Ahangarpour, Ameneh A New Modified Hamilton-Crosser and Nan Models for Thermal ‎Conductivity of Different Lengths Carbon Nanotubes Water-‎based Nanofluids [Volume 8, Issue 3, 2022, Pages 831-837]
  • Ahmad, Aqeel Close Loop Design in Glucose Insulin Model with Effect of ‎Physical Exercise [Volume 7, Issue 2, 2021, Pages 478-485]
  • Ahmad, Bakhtiar Transient MHD Convective Flow of Fractional Nanofluid between Vertical Plates [Volume 5, Issue 4, 2019, Pages 592-602]
  • Ahmad, Hijaz Modified Variational Iteration Technique for the Numerical ‎Solution of Fifth Order KdV-type Equations [Volume 6, Special Issue, 2020, Pages 1220-1227]
  • Ahmad, Hijaz A Radial Basis Function Collocation Method for Space-dependent ‎Inverse Heat Problems [Volume 6, Special Issue, 2020, Pages 1187-1199]
  • Ahmad, Hijaz A Modified Thermoelastic Fractional Heat Conduction Model ‎with a Single-Lag and Two Different Fractional-Orders [Volume 7, Issue 3, 2021, Pages 1676-1686]
  • Ahmad, Hijaz Thermoelastic Modeling with Dual Porosity Interacting with an Inviscid Liquid [Volume 10, Issue 1, 2024, Pages 111-124]
  • Ahmad, Imtiaz Modified Variational Iteration Technique for the Numerical ‎Solution of Fifth Order KdV-type Equations [Volume 6, Special Issue, 2020, Pages 1220-1227]
  • Ahmad, Imtiaz A Radial Basis Function Collocation Method for Space-dependent ‎Inverse Heat Problems [Volume 6, Special Issue, 2020, Pages 1187-1199]
  • Ahmadi, Farshid Design, Analysis and Manufacturing of a Bone Cutting Ultrasonic Horn-Tool and Verification with Experimental Tests [Volume 8, Issue 2, 2022, Pages 438-447]
  • Ahmadi, Goodarz Effect of Inlet Air Locations on Particle Concentration using ‎Large Eddy Simulation based on Multi Relaxation Time Lattice ‎Boltzmann Method [Volume 7, Issue 4, 2021, Pages 1944-1955]
  • Ahmadi, Mohammad Hossein Hydrodynamic Behavior in Solar Oil Heat Exchanger Ducts Fitted ‎with Staggered Baffles and Fins [Volume 8, Issue 3, 2022, Pages 774-790]
  • Ahmadifar, Ahmad Experimental and Numerical Buckling Analysis of Carbon Fiber Composite Lattice Conical Structure before and after Lateral Impact [Volume 6, Issue 4, 2020, Pages 813-822]
  • Ahmadi Nadooshan, Afshin Power Law Nanofluid through Tapered Artery based on a ‎Consistent Couple Stress Theory [Volume 9, Issue 3, 2023, Pages 623-636]
  • Ahmad Pour, M. Thermal Buckling Analysis of Circular Bilayer Graphene Sheets Resting on an Elastic Matrix Based on Nonlocal Continuum Mechanics [Volume 7, Issue 4, 2021, Pages 1862-1877]
  • Ahmadzadehtalatapeh, Mohammd Optimization of Air Distribution Patterns by Arrangements of ‎Air Inlets and Outlets: Case Study of an Operating Room [Volume 8, Issue 3, 2022, Pages 809-830]
  • Ahmed, Arsalan Traveling Wave Solutions of 3D Fractionalized MHD Newtonian Fluid in Porous Medium with Heat Transfer [Volume 6, Issue 4, 2020, Pages 968-984]
  • Ahmed, Arsalan New Exact Traveling Wave Solutions for Fractional Order System ‎Describing the Second Grade Fluid through Medium with Heat ‎Transfer‎ [Volume 7, Issue 2, 2021, Pages 764-781]
  • Ahmed, Khaled I. Free Vibration Analysis of 2D Functionally Graded Strip Beam using Finite ‎Element Method‎ [Volume 8, Issue 4, 2022, Pages 1422-1430]
  • Ahmed, Munshoor A Kinetic Flux-vector Splitting Scheme for Two-layer Shallow Flow Model [Volume 8, Issue 3, 2022, Pages 1043-1053]
  • Ahmed, Najma Magnetohydrodynamic Free Convection Flows with Thermal Memory over a Moving Vertical Plate in Porous Medium [Volume 5, Issue 1, 2019, Pages 150-161]
  • Ahmed, Najma Transient MHD Convective Flow of Fractional Nanofluid between Vertical Plates [Volume 5, Issue 4, 2019, Pages 592-602]
  • Ahmed, Naveed Jeffery Hamel Flow of a non-Newtonian Fluid [Volume 2, Issue 1, 2016, Pages 21-28]
  • Ahmed, Sahin Theoretical Investigation of Viscosity and Thermal Conductivity ‎of a Gas along a Non-isothermal Vertical Surface in Porous ‎Environment with Dissipative Heat: Numerical Technique [Volume 8, Issue 4, 2022, Pages 1236-1245]
  • Ahmed Houari, Mohammed Sid Buckling Analysis of Embedded Nanosize FG Beams Based on a Refined Hyperbolic Shear Deformation Theory [Volume 4, Issue 3, 2018, Pages 140-146]
  • AID, Abdelkrim Biomechanical Evaluation of Bone Quality Effect on Stresses at Bone-Implant Interface: A Finite Element Study [Volume 7, Issue 3, 2021, Pages 1266-1275]
  • Ajaykumar, A.R. Entropy Analysis of Darcy-Forchheimer Model of Prandtl Nanofluid over a Curved Stretching Sheet and Heat Transfer Optimization by ANOVA-Taguchi Technique [Volume 10, Issue 2, 2024, Pages 287-303]
  • Ajorkar, Abbas Design of an Adaptive-Neural Network Attitude Controller of a Satellite using Reaction Wheels [Volume 1, Issue 2, 2015, Pages 67-73]
  • AKANO, Theddeus T. Deformation Characteristics of Composite Structures [Volume 2, Issue 3, 2016, Pages 174-191]
  • Akbari, Reza Thermal-Hydraulics analysis of pressurized water reactor core by using single heated channel model [Volume 3, Issue 3, 2017, Pages 192-198]
  • Akbas, Seref Doguscan Application of Newmark Average Acceleration and Ritz Methods ‎on Dynamical Analysis of Composite Beams under a Moving Load [Volume 8, Issue 2, 2022, Pages 764-773]
  • Akbaş, Şeref Doğuşcan Vibration and Static Analysis of Functionally Graded Porous Plates [Volume 3, Issue 3, 2017, Pages 199-207]
  • Akbaş, Şeref Doğuşcan Hygro-Thermal Nonlinear Analysis of a Functionally Graded Beam [Volume 5, Issue 2, 2019, Pages 477-485]
  • Akbaş, Şeref Doğuşcan Forced Vibration Responses of Axially Functionally Graded ‎Beams by using Ritz Method [Volume 7, Issue 1, 2021, Pages 109-115]
  • Akgöz, Bekir Deflection of a hyperbolic shear deformable microbeam under a concentrated load [Volume 2, Issue 2, 2016, Pages 65-73]
  • Akgöz, Bekir Application of Newmark Average Acceleration and Ritz Methods ‎on Dynamical Analysis of Composite Beams under a Moving Load [Volume 8, Issue 2, 2022, Pages 764-773]
  • Akgöz, Bekir A Novel Approach to Fully Nonlinear Mathematical Modeling of ‎Tectonic Plates [Volume 9, Issue 2, 2023, Pages 430-444]
  • Akgül, Ali Effects of Non-Linear Thermal Radiation and Chemical Reaction ‎on Time Dependent Flow of Williamson Nanofluid With Combine ‎Electrical MHD and Activation Energy [Volume 7, Issue 2, 2021, Pages 546-558]
  • Akgül, Ali Close Loop Design in Glucose Insulin Model with Effect of ‎Physical Exercise [Volume 7, Issue 2, 2021, Pages 478-485]
  • Akgül, Ali Solving Duffing-Van der Pol Oscillator Equations of Fractional ‎Order by an Accurate Technique [Volume 7, Issue 3, 2021, Pages 1480-1487]
  • Akhmedov, Natig K. Axisymmetric Problem of the Elasticity Theory for the Radially ‎Inhomogeneous Cylinder with a Fixed Lateral Surface [Volume 7, Issue 2, 2021, Pages 598-610]
  • Akhmetzhanov, Maxat Regularization of the Movement of a Material Point Along a Flat ‎Trajectory: Application to Robotics Problems [Volume 7, Issue 3, 2021, Pages 1726-1736]
  • Akhtar, Imran VIV Control Strategies Using Displacement-Based ‎Phenomenological Model [Volume 7, Special Issue, 2021, Pages 1090-1097]
  • Akinshilo, Akin T Perturbation Solutions for the Study of MHD Blood as a Third Grade Nanofluid Transporting Gold Nanoparticles through a Porous Channel [Volume 3, Issue 2, 2017, Pages 103-113]
  • Akinshilo, Akinbowale T. Heat Transfer Analysis of Nanofluid Flow with Porous Medium through Jeffery Hamel Diverging/Converging Channel [Volume 6, Issue 3, 2020, Pages 433-444]
  • Akinshilo, Akinbowale T. Thermal Analysis of Radiating Film Flow of Sodium Alginate ‎using MWCNT Nanoparticles ‎ [Volume 8, Issue 1, 2022, Pages 219-231]
  • Akinshilo, Akin T. Flow and Heat Transfer Analysis of the Sodium Alginate Conveying Copper Nanoparticles between Two Parallel Plates [Volume 3, Issue 4, 2017, Pages 258-266]
  • Akolade, Mojeed T. Influence of Thermophysical Features on MHD Squeezed Flow of ‎Dissipative Casson Fluid with Chemical and Radiative Effects [Volume 7, Issue 4, 2021, Pages 1999-2009]
  • Akram, Safia On Stokes' Second Problem for Burgers' Fluid over a Plane Wall [Volume 7, Issue 3, 2021, Pages 1514-1526]
  • Akter, Aysha Heat Transfer Enhancement and Boundary Layer Separations for ‎a Hybrid Nanofluid Flow past an Isothermal Cylinder [Volume 7, Issue 4, 2021, Pages 2096-2112]
  • Akzhigitov, Dulat Structural and Aerodynamical Parametric Study of Truss-Core ‎Gas Turbine Rotor Blade [Volume 7, Issue 2, 2021, Pages 831-838]
  • Alaluf, David Precision Shape Control of Ultra-thin Shells with Strain Actuators [Volume 7, Special Issue, 2021, Pages 1130-1137]
  • Alam, Md Nur Heat Transport Exploration of Free Convection Flow inside ‎Enclosure Having Vertical Wavy Walls [Volume 7, Issue 2, 2021, Pages 520-527]
  • Alam, Md. Nur An analytical Technique for Solving New Computational ‎Solutions of the Modified Zakharov-Kuznetsov ‎Equation Arising ‎in Electrical Engineering [Volume 7, Issue 2, 2021, Pages 715-726]
  • Alam, Md. Nur Dynamics of Damped and Undamped Wave Natures of the Fractional Kraenkel-Manna-Merle System in Ferromagnetic Materials [Volume 10, Issue 2, 2024, Pages 317-329]
  • Alandoli, Esmail Ali Robust P-H∞ Integrated Controller for Flexible Link Manipulator ‎System in the Presence of Disturbance [Volume 7, Issue 2, 2021, Pages 646-654]
  • Alaofi, Z.M. Numerical Investigations of the Coupled Nonlinear Non-homogeneous Partial Differential Equations [Volume 8, Issue 3, 2022, Pages 1054-1064]
  • Al-Asad, Md. Fayz - Heat Transport Exploration of Free Convection Flow inside ‎Enclosure Having Vertical Wavy Walls [Volume 7, Issue 2, 2021, Pages 520-527]
  • Al-Asad, Md. Fayz An analytical Technique for Solving New Computational ‎Solutions of the Modified Zakharov-Kuznetsov ‎Equation Arising ‎in Electrical Engineering [Volume 7, Issue 2, 2021, Pages 715-726]
  • AlBaiti, Saleh On the Usefulness of Pre-processing Methods in Rotating ‎Machines Faults Classification using Artificial Neural Network [Volume 7, Issue 1, 2021, Pages 254-261]
  • Al-Chlaihawi, Murtadha J. Bifurcation of Fiber-Reinforced Cylindrical Membranes under ‎Extension, Inflation, and Swelling [Volume 9, Issue 1, 2023, Pages 113-128]
  • Aldabergen, Abilkhairkhan Structural and Aerodynamical Parametric Study of Truss-Core ‎Gas Turbine Rotor Blade [Volume 7, Issue 2, 2021, Pages 831-838]
  • Al Dulaimi, Zaid M. Local Thermal Non-equilibrium Analysis of Cu-Al2O3 Hybrid ‎Nanofluid Natural Convection in a Partially Layered Porous ‎Enclosure with Wavy Walls [Volume 9, Issue 3, 2023, Pages 712-727]
  • Ale Ali, Nassim Effect of thermoelastic damping in nonlinear beam model of MEMS resonators by differential quadrature method [Volume 1, Issue 3, 2015, Pages 112-121]
  • Ale Ali, Nassim Time integration of rectangular membrane free vibration using spline-based differential quadrature [Volume 2, Issue 2, 2016, Pages 74-79]
  • Aleksandrov, Alexander Yu. Stability Analysis of Gyroscopic Systems with Delay under ‎Synchronous and Asynchronous Switching [Volume 8, Issue 3, 2022, Pages 1113-1119]
  • Aleksandrov, Alexander Y. Nonlinear Control for Attitude Stabilization of a Rigid Body ‎Forced by Nonstationary Disturbances with Zero Mean Values [Volume 7, Issue 2, 2021, Pages 790-797]
  • Aleksandrov, A.Yu. Natural Magneto-velocity Coordinate System for Satellite ‎Attitude Stabilization: Dynamics and Stability Analysis [Volume 9, Issue 2, 2023, Pages 513-520]
  • Al-Falahi, Amir Two-Dimensional Numerical Study of the Transient Flow ‎Conditions in Complete Shock Tunnel‎ [Volume 7, Issue 2, 2021, Pages 956-964]
  • Alfaqeih, Suliman Conformable Double Sumudu Transform with Applications [Volume 7, Issue 2, 2021, Pages 578-586]
  • Alghafis, Abdullah Design Optimization and Experimental Validation of Low-Cost ‎Flat Plate Collector Under Central Qasssim Climate [Volume 7, Issue 2, 2021, Pages 811-819]
  • Al-Griffi, Takia Ahmed J. Analytical Investigations for the Joint Impacts of Electro-osmotic and Some Relevant Parameters to Blood Flow in Mildly Stenosis Artery [Volume 9, Issue 1, 2023, Pages 274-293]
  • Al-Griffi, Takia Ahmed J. Analytical Simulation for Transient Natural Convection in a ‎Horizontal Cylindrical Concentric Annulus [Volume 7, Issue 2, 2021, Pages 621-637]
  • Ali, Aamir Third-grade Fluid Flow of Stretching Cylinder with Heat Source/Sink [Volume 6, Special Issue, 2020, Pages 1125-1132]
  • Ali, Fadi Numerical Study on Subsurface Stress in Hertzian Contacts under Pure Sliding Conditions [Volume 6, Special Issue, 2020, Pages 1098-1106]
  • Ali, Hafiz M. Heat Transfer Analysis of Nanofluid Flow with Porous Medium through Jeffery Hamel Diverging/Converging Channel [Volume 6, Issue 3, 2020, Pages 433-444]
  • Ali, Mohamed R. The Method of Lines Analysis of Heat Transfer of Ostwald-de Waele Fluid Generated by a Non-uniform Rotating Disk with a Variable Thickness [Volume 7, Issue 2, 2021, Pages 432-441]
  • Ali, Muhammad Awais On the Usefulness of Pre-processing Methods in Rotating ‎Machines Faults Classification using Artificial Neural Network [Volume 7, Issue 1, 2021, Pages 254-261]
  • Ali, Zeeshan Numerical Simulation of Fuzzy Volterra Integro-differential ‎Equation using Improved Runge-Kutta Method [Volume 9, Issue 1, 2023, Pages 72-82]
  • Aliasghary, Mortaza Pull-in Phenomenon in the Electrostatically Micro-switch ‎Suspended between Two Conductive Plates using the Artificial ‎Neural Network [Volume 8, Issue 4, 2022, Pages 1222-1235]
  • Aliev, Fikret A Solution of the Problem of Analytical Construction of Optimal ‎Regulators for a Fractional Order Oscillatory System in the ‎General Case [Volume 7, Issue 2, 2021, Pages 970-976]
  • Aliev, Fikret A. Larin Parameterization to Solve the Problem of Analytical ‎Construction of the Optimal Regulator of Oscillatory Systems ‎with Liquid Dampers [Volume 6, Special Issue, 2020, Pages 1426-1430]
  • Aliev, Fikret A. Algorithm for Determining the Permeability and Compaction ‎Properties of a Gas Condensate Reservoir based on a Binary Model [Volume 8, Issue 3, 2022, Pages 1014-1022]
  • Aliev, Nihan A Solution of the Problem of Analytical Construction of Optimal ‎Regulators for a Fractional Order Oscillatory System in the ‎General Case [Volume 7, Issue 2, 2021, Pages 970-976]
  • Aliev, Nihan A. Larin Parameterization to Solve the Problem of Analytical ‎Construction of the Optimal Regulator of Oscillatory Systems ‎with Liquid Dampers [Volume 6, Special Issue, 2020, Pages 1426-1430]
  • Ali-Kayiem, Hussain H. Assessment of the Turbine Location for Optimum Performance of the Solar Vortex Engine as a Replacement to the Tall Chimney Solar Updraft Power Plant Design [Volume 10, Issue 1, 2024, Pages 38-54]
  • Ali Shah, Nehad Magnetohydrodynamic Free Convection Flows with Thermal Memory over a Moving Vertical Plate in Porous Medium [Volume 5, Issue 1, 2019, Pages 150-161]
  • Ali Shah, Nehad Transient MHD Convective Flow of Fractional Nanofluid between Vertical Plates [Volume 5, Issue 4, 2019, Pages 592-602]
  • Alizadeh, Ali A Modified Couple Stress-Based Model for the Nonlinear ‎Vibrational Analysis of Nano-Disks Using Multiple Scales Method [Volume 8, Issue 2, 2022, Pages 580-596]
  • Alizadeh Kharkeshi, Behrad Numerical Study of the Hydrodynamic Behavior of an Archimedes Screw Turbine by Experimental Data in order to Optimize Turbine Performance: The Genetic Algorithm [Volume 9, Issue 4, 2023, Pages 1060-1075]
  • Aljibori, Hakim S. Sultan Two-Dimensional Numerical Study of the Transient Flow ‎Conditions in Complete Shock Tunnel‎ [Volume 7, Issue 2, 2021, Pages 956-964]
  • Al-Jumaili, Safaa On the Use of Acoustic Emission and Digital Image Correlation for Welded Joints Damage Characterization [Volume 5, Issue 2, 2019, Pages 381-389]
  • Allahverdi, Jafarov Algorithm for Determining the Permeability and Compaction ‎Properties of a Gas Condensate Reservoir based on a Binary Model [Volume 8, Issue 3, 2022, Pages 1014-1022]
  • Alluguvelli, Ramesh Effect of Chemical Reaction on Bioconvective Flow in Oxytactic Microorganisms Suspended Porous Cavity [Volume 6, Issue 3, 2020, Pages 653-664]
  • Al-Mdallal, Qasem M. Unsteady Separated Stagnation Point Flow of Nanofluid past a ‎Moving Flat Surface in the Presence of Buongiorno's Model [Volume 7, Issue 3, 2021, Pages 1283-1290]
  • Almeida, F. Entropy Analysis of Darcy-Forchheimer Model of Prandtl Nanofluid over a Curved Stretching Sheet and Heat Transfer Optimization by ANOVA-Taguchi Technique [Volume 10, Issue 2, 2024, Pages 287-303]
  • Almeida, Luís Philipe Ribeiro Analysis of High-order Approximations by Spectral Interpolation Applied to One- and Two-dimensional Finite Element Method [Volume 6, Issue 1, 2020, Pages 145-159]
  • Almeida, Raquel Numerical Analysis on the Bond Performance of Different ‎Anchored Joints under Monotonic and Cyclic Pull-push Loading [Volume 8, Issue 1, 2022, Pages 388-404]
  • Almitani, Khalid H. Buckling Behaviors of Symmetric and Antisymmetric Functionally Graded Beams [Volume 4, Issue 2, 2018, Pages 115-124]
  • Al-Muslimawi, Alaa H. Numerical Simulation of Non-Newtonian Inelastic Flows in Channel based on Artificial Compressibility Method [Volume 6, Issue 2, 2020, Pages 271-283]
  • Alnemrawi, Bara’a R. Prediction of Interface Shear Strength of Heat Damaged Shear-keys using Nonlinear Finite Element Analysis [Volume 9, Issue 4, 2023, Pages 1000-1015]
  • Al-Rahman, Mohammed A. Thermal Performance Study of Plate-finned Vapor Chamber Heat Sink [Volume 10, Issue 2, 2024, Pages 304-316]
  • Al-Rousan, Rajai Z. Prediction of Interface Shear Strength of Heat Damaged Shear-keys using Nonlinear Finite Element Analysis [Volume 9, Issue 4, 2023, Pages 1000-1015]
  • Al-Saif, Abdul-Sattar Perturbation-Iteration Algorithm for Solving Heat and Mass Transfer in the Unsteady Squeezing Flow between Parallel Plates [Volume 5, Issue 4, 2019, Pages 804-815]
  • Al-Saif, Abdul-Sattar J. Analytical Investigations for the Joint Impacts of Electro-osmotic and Some Relevant Parameters to Blood Flow in Mildly Stenosis Artery [Volume 9, Issue 1, 2023, Pages 274-293]
  • Al-Saif, A.S.J. Analytical Simulation for Transient Natural Convection in a ‎Horizontal Cylindrical Concentric Annulus [Volume 7, Issue 2, 2021, Pages 621-637]
  • Alsakarneh, Amjad Impact Dynamics of Nonlinear Materials: FE Analysis [Volume 9, Issue 3, 2023, Pages 728-738]
  • Alsyouf, Imad On the Usefulness of Pre-processing Methods in Rotating ‎Machines Faults Classification using Artificial Neural Network [Volume 7, Issue 1, 2021, Pages 254-261]
  • Alvarez, Luis F. A Reduced-Order Simulation Methodology for Nanosecond-Pulsed Plasmas in a Backward-Facing ‎Step Supersonic Combustor Configuration [Volume 9, Issue 1, 2023, Pages 181-194]
  • Aly, Emad H. Steady Gyrostatic Nanofluid Flow past a Permeable Stretching/shrinking Sheet with Velocity Slip Condition using the Nanofluid Model Proposed by Buongiorno [Volume 10, Issue 2, 2024, Pages 413-421]
  • Al-Zahrani, Meshal A. Free Vibration Analysis of 2D Functionally Graded Strip Beam using Finite ‎Element Method‎ [Volume 8, Issue 4, 2022, Pages 1422-1430]
  • Alzghoul, Ahmad On the Usefulness of Pre-processing Methods in Rotating ‎Machines Faults Classification using Artificial Neural Network [Volume 7, Issue 1, 2021, Pages 254-261]
  • Amanulla, CH. Magneto Casson-Carreau Fluid Flow through a Circular Porous ‎Cylinder with Partial Slip‎ [Volume 8, Issue 4, 2022, Pages 1208-1221]
  • Amaral, Rodrigo Reis Proportional Topology Optimization under ‎Reliability-based Constraints [Volume 8, Issue 1, 2022, Pages 319-330]
  • Amaral, Rodrigo Reis A Novel BESO Methodology for Topology Optimization of ‎Reinforced Concrete Structures: A Two-loop Approach [Volume 9, Issue 2, 2023, Pages 498-512]
  • Ameijeiras, Mariano P. Quasi-bifurcation and Imperfection-sensitivity of Cylindrical ‎Shells under Pressures due to an Explosion [Volume 7, Issue 2, 2021, Pages 984-992]
  • Ameur, Houari Effect of Corrugated Baffles on the Flow and Thermal Fields in a Channel Heat Exchanger [Volume 6, Issue 2, 2020, Pages 209-218]
  • Ameur, Houari Thermal-Aerodynamic Performance Measurement of Air Heat ‎Transfer Fluid Mechanics over S-shaped Fins in Shell-and-tube ‎Heat Exchangers [Volume 7, Issue 4, 2021, Pages 1931-1943]
  • Ameur, Houari Hydrodynamic Behavior in Solar Oil Heat Exchanger Ducts Fitted ‎with Staggered Baffles and Fins [Volume 8, Issue 3, 2022, Pages 774-790]
  • Amini, Yasser Thermal Performance of Oscillating Blade with Various ‎Geometries in a Straight Channel [Volume 8, Issue 1, 2022, Pages 114-128]
  • Amiri, Saeed Reduction in Space for Dynamic Finite Element Analysis of Assemblies of Beam-columns when the Mass is Available in Digitized Format [Volume 8, Issue 1, 2022, Pages 71-83]
  • Amiri Delouei, Amin Mesoscopic Simulation of Forced Convective Heat Transfer of Carreau-Yasuda Fluid Flow over an Inclined Square: Temperature-dependent Viscosity [Volume 6, Issue 2, 2020, Pages 307-319]
  • Amiri Delouei, Amin Effect of Inlet Air Locations on Particle Concentration using ‎Large Eddy Simulation based on Multi Relaxation Time Lattice ‎Boltzmann Method [Volume 7, Issue 4, 2021, Pages 1944-1955]
  • Amiri Delouei, Amin Optimization of Spark Ignition Engine Performance using a New ‎Double Intake Manifold: Experimental and Numerical Analysis [Volume 9, Issue 1, 2023, Pages 1-14]
  • Amiri Delouei, Amin An Exact Analytical Solution for Heat Conduction in a ‎Functionally Graded Conical Shell [Volume 9, Issue 2, 2023, Pages 302-317]
  • Amirsalari, Behzad Optimum Design of Liquified Natural Gas Bi-lobe Tanks using Finite Element, Genetic Algorithm and Neural Network [Volume 6, Issue 4, 2020, Pages 862-877]
  • Ammar, HAIAHEM Heat Transfer in Hydro-Magnetic Nano-Fluid Flow between Non-Parallel Plates Using DTM [Volume 4, Issue 4, 2018, Pages 352-364]
  • Analooee, Ali Time Distance: A Novel Collision Prediction and Path Planning Method [Volume 9, Issue 3, 2023, Pages 656-677]
  • Anaya, Maribel Manifold Learning Algorithms Applied to Structural Damage ‎Classification [Volume 7, Special Issue, 2021, Pages 1158-1166]
  • Anbalagan, Satheesh MHD Double-Diffusive Natural Convection in a Closed Space ‎Filled with Liquid Metal: Mesoscopic Analysis [Volume 7, Issue 3, 2021, Pages 1448-1465]
  • Anghel, Ion The Permutation Entropy and its Applications on Fire Tests Data [Volume 6, Special Issue, 2020, Pages 1380-1393]
  • Animasaun, I.L. Exploration of the Significance of Autocatalytic Chemical Reaction and Cattaneo-Christov Heat Flux on the Dynamics of a Micropolar Fluid [Volume 6, Issue 1, 2020, Pages 77-89]
  • Anjum, Asia On Stokes' Second Problem for Burgers' Fluid over a Plane Wall [Volume 7, Issue 3, 2021, Pages 1514-1526]
  • Anjum, Naveed Two Modifications of the Homotopy Perturbation Method for ‎Nonlinear Oscillators [Volume 6, Special Issue, 2020, Pages 1420-1425]
  • Anjum, Naveed A Variational Principle for a Nonlinear Oscillator Arising in the ‎Microelectromechanical System [Volume 7, Issue 1, 2021, Pages 78-83]
  • Anjum, Naveed A Brief Review on the Asymptotic Methods for the Periodic ‎Behaviour of Microelectromechanical Systems [Volume 8, Issue 3, 2022, Pages 1120-1140]
  • Anki Reddy, P.B. Numerical Simulations of Unsteady 3D MHD Micropolar Fluid Flow over a Slendering Sheet [Volume 7, Issue 3, 2021, Pages 1403-1412]
  • Ansari, Md. S. A Paired Quasi-linearization on Magnetohydrodynamic Flow and Heat Transfer of Casson Nanofluid with Hall Effects [Volume 5, Issue 5, 2019, Pages 849-860]
  • Ansari, Md.S. Magnetohydrodynamic Bio-convective Casson Nanofluid Flow: A Numerical Simulation by Paired Quasilinearisation [Volume 7, Issue 4, 2021, Pages 2024-2039]
  • Ansarifard, Ali Akbar An investigation the effects of geometric tolerances on the natural frequencies of rotating shafts [Volume 1, Issue 2, 2015, Pages 103-111]
  • Antonov, Dmitrii V. ‎2D Planar Simulation of Collisions between Liquid Droplets and ‎Solid Particles in a Gas [Volume 9, Issue 3, 2023, Pages 678-694]
  • Antypov, Ievgen Numerical Modeling of Heat Transfer and Hydrodynamics in Compact Shifted Arrangement Small Diameter Tube Bundles [Volume 7, Issue 1, 2021, Pages 292-301]
  • Antypov, Ievgen Experimental and Numerical Investigation of Heat and Mass ‎Transfer Processes for Determining the Optimal Design of an ‎Accumulator with Phase Transformations [Volume 7, Issue 2, 2021, Pages 611-620]
  • Anwar Bég, Osman Non-similar Radiative Bioconvection Nanofluid Flow under ‎Oblique Magnetic Field with Entropy Generation‎ [Volume 8, Issue 1, 2022, Pages 206-218]
  • Anwar Beg, Osman Melting Heat Transfer Analysis on Magnetohydrodynamics Buoyancy Convection in an Enclosure: A Numerical Study [Volume 6, Issue 1, 2020, Pages 52-62]
  • Apuzzo, Andrea Axial and Torsional Free Vibrations of Elastic Nano-Beams by Stress-Driven Two-Phase Elasticity [Volume 5, Issue 2, 2019, Pages 402-413]
  • Arab Ameri, Maryam Moving Mesh Non-standard Finite Difference Method for Non-linear Heat Transfer in a Thin Finite Rod [Volume 4, Issue 3, 2018, Pages 161-166]
  • Arab Ameri, Maryam High Order Compact Finite Difference Schemes for Solving Bratu-Type Equations [Volume 5, Issue 1, 2019, Pages 91-102]
  • Arabi, E. On the Geometrically Nonlinear Analysis of Composite Axisymmetric Shells [Volume 4, Special Issue: Applied and Computational Issues in Structural Engineering, 2018, Pages 402-419]
  • Arbie, M. Rizqie Two-Solid Deposition in Fluid Column using Immersed ‎Boundary-Lattice Boltzmann Method [Volume 7, Issue 3, 2021, Pages 1814-1825]
  • Arciniega, R.A. On Bending Response of Doubly Curved Laminated Composite Shells Using Hybrid Refined Models [Volume 5, Issue 5, 2019, Pages 875-899]
  • Arciniega, RA Generalized 2-Unknown’s HSDT to Study Isotropic and Orthotropic Composite Plates [Volume 5, Issue 1, 2019, Pages 141-149]
  • Arciniega, RA Bending and Free Vibration Analysis of Functionally Graded Plates via Optimized Non-polynomial Higher Order Theories [Volume 5, Issue 2, 2019, Pages 281-298]
  • Arefi, Mohammad Lamb Wave Analysis in Anisotropic Multilayer ‎Piezoelectric-piezomagnetic Material [Volume 8, Issue 2, 2022, Pages 629-640]
  • Argyridi, Amalia Generalized Warping In Flexural-Torsional Buckling Analysis of Composite Beams [Volume 2, Issue 3, 2016, Pages 152-173]
  • Arhamnamazi, Seyyed Abbas Accuracy Assessment of Ultrasonic C-scan and X-ray Radiography Methods for Impact Damage Detection in Glass Fiber Reinforced Polyester Composites [Volume 5, Issue 2, 2019, Pages 258-268]
  • Ariaei, Alireza Vibration analysis of a rotating closed section composite Timoshenko beam by using differential transform method [Volume 1, Issue 4, 2015, Pages 181-186]
  • Asadi, Tahereh The Development and Application of the RCW Method for the Solution of the Blasius Problem [Volume 6, Issue 1, 2020, Pages 105-111]
  • Asako, Yutaka Moving Least Squares Method and its Improvement: A Concise Review [Volume 7, Issue 2, 2021, Pages 883-889]
  • Asghar, Saleem Third-grade Fluid Flow of Stretching Cylinder with Heat Source/Sink [Volume 6, Special Issue, 2020, Pages 1125-1132]
  • Ashiq, Alina A Brief Review on the Asymptotic Methods for the Periodic ‎Behaviour of Microelectromechanical Systems [Volume 8, Issue 3, 2022, Pages 1120-1140]
  • Ashjaee, Mehdi Numerical Investigation on Slot air Jet impingement Heat Transfer between Horizontal Concentric Circular Cylinders [Volume 1, Issue 2, 2015, Pages 74-82]
  • Ashorynejad, Hamid Reza Temperature Effect on Moving Water Droplets at the Channel of ‎PEMFC by Multi-component Multiphase Lattice Boltzmann Method [Volume 9, Issue 3, 2023, Pages 607-622]
  • Asiri, Saeed A. Free Vibration Analysis of 2D Functionally Graded Strip Beam using Finite ‎Element Method‎ [Volume 8, Issue 4, 2022, Pages 1422-1430]
  • Asjad, Muhammad Imran Effects of Non-Linear Thermal Radiation and Chemical Reaction ‎on Time Dependent Flow of Williamson Nanofluid With Combine ‎Electrical MHD and Activation Energy [Volume 7, Issue 2, 2021, Pages 546-558]
  • Askari, Nematollah Prediction of Entrance Length for Magnetohydrodynamics Channels Flow using Numerical simulation and Artificial Neural Network [Volume 6, Issue 3, 2020, Pages 582-592]
  • Askari, Nematollah Magnetohydrodynamics Fluid Flow and Heat Transfer over a Permeable Shrinking Sheet with Joule dissipation: Analytical Approach [Volume 6, Issue 4, 2020, Pages 999-1011]
  • Askin, Mustafa Yunus Theory and Experiment in Predicting the Strength of Hybrid ‎Fiber Metal Laminates [Volume 9, Issue 4, 2023, Pages 987-999]
  • Asroun, Aïssa A FEM Multiscale Homogenization Procedure using Nanoindentation for High Performance Concrete [Volume 6, Issue 3, 2020, Pages 493-504]
  • Assie, Amr E. Static Buckling of 2D FG Porous Plates Resting on Elastic ‎Foundation based on Unified Shear Theories‎ [Volume 9, Issue 1, 2023, Pages 239-258]
  • Astaraki, Abdolreza Experimental and Numerical Investigations on the Effect of Rectangular Openings’ Aspect Ratio on Outflow Discharge [Volume 4, Special Issue: Applied and Computational Issues in Structural Engineering, 2018, Pages 457-466]
  • Atangana, Abdon MHD Oldroyd-B Fluid with Slip Condition in view of Local and ‎Nonlocal Kernels [Volume 7, Issue 1, 2021, Pages 116-127]
  • Atashafrooz, Meysam The Development and Application of the RCW Method for the Solution of the Blasius Problem [Volume 6, Issue 1, 2020, Pages 105-111]
  • Atta, Doaa Thermal Diffusion Responses in an Infinite Medium with a ‎Spherical Cavity using the Atangana-Baleanu Fractional ‎Operator [Volume 8, Issue 4, 2022, Pages 1358-1369]
  • Attaran, Behrooz Bearing Fault Detection Based on Maximum Likelihood Estimation and Optimized ANN Using the Bees Algorithm [Volume 1, Issue 1, 2015, Pages 35-43]
  • Attia, Nourhane Solving Duffing-Van der Pol Oscillator Equations of Fractional ‎Order by an Accurate Technique [Volume 7, Issue 3, 2021, Pages 1480-1487]
  • AUFRAY, Maëlenn Using the Finite Element Analysis Method to Study the 3-point Bending Test for the Characterization of the Adherence [Volume 6, Issue 3, 2020, Pages 505-516]
  • Aulin, Viktor The Dynamics of the Working Body of the Tubular Conveyor with ‎the Chain Drive [Volume 7, Issue 3, 2021, Pages 1710-1718]
  • Avazzadeh, Zakieh Haar Wavelet Method for Solving High-Order Differential Equations with Multi-Point Boundary Conditions [Volume 8, Issue 2, 2022, Pages 528-544]
  • Avcar, Mehmet Free Vibration Analysis of FG Porous Sandwich Plates under ‎Various Boundary Conditions [Volume 7, Issue 2, 2021, Pages 505-519]
  • Avci, Onur Temperature Dependent Damping in Additively Manufactured ‎Polymer Structures [Volume 7, Special Issue, 2021, Pages 993-1008]
  • AVEY, Mahmure Nonlinear Dynamic Behavior of Hyperbolic Paraboloidal Shells ‎Reinforced by Carbon Nanotubes with Various Distributions [Volume 7, Issue 2, 2021, Pages 913-921]
  • Awad, Mohamed M. Theoretical Analysis of the Motorcycle Front Brake Heating ‎Process during High Initial Speed Emergency Braking [Volume 6, Special Issue, 2020, Pages 1431-1437]
  • Awais, Muhammad Third-grade Fluid Flow of Stretching Cylinder with Heat Source/Sink [Volume 6, Special Issue, 2020, Pages 1125-1132]
  • Awrejcewicz, Jan Analysis of Free Vibration of Porous Power-law and Sigmoid Functionally Graded Sandwich Plates by the R-functions Method [Volume 9, Issue 4, 2023, Pages 1144-1155]
  • Awwad, Essam Thermoelastic Memory-dependent Responses to an Infinite Medium ‎with a Cylindrical Hole and Temperature-dependent Properties [Volume 7, Issue 2, 2021, Pages 870-882]
  • Ayaz, Muhammad Comparative Study of Plane Poiseuille Flow of Non-isothermal ‎Couple ‎Stress Fluid of Reynold Viscosity Model using Optimal ‎Homotopy ‎Asymptotic Method and New Iterative Method [Volume 7, Issue 2, 2021, Pages 404-414]
  • Aydogdu, Ibrahim Optimum Design of Nano-Scaled Beam Using the Social Spider Optimization (SSO) Algorithm [Volume 7, Issue 3, 2021, Pages 1348-1361]
  • Aymerich, Francesco Accuracy Assessment of Ultrasonic C-scan and X-ray Radiography Methods for Impact Damage Detection in Glass Fiber Reinforced Polyester Composites [Volume 5, Issue 2, 2019, Pages 258-268]
  • Azadi, Shahram A Comparative Study on the Efficiency of Compiled Languages ‎and MATLAB/Simulink for Simulation of Highly Nonlinear ‎Automotive Systems [Volume 8, Issue 3, 2022, Pages 853-864]
  • Azadi, Shahram A Novel Flexible Lane Changing (FLC) Method in Complicated ‎Dynamic Environment for Automated Vehicles [Volume 9, Issue 2, 2023, Pages 318-331]
  • Azadi, Shahram Time Distance: A Novel Collision Prediction and Path Planning Method [Volume 9, Issue 3, 2023, Pages 656-677]
  • Azargoman, Majid Modeling of Weld Bead Geometry Using Adaptive Neuro-Fuzzy Inference System (ANFIS) in Additive Manufacturing [Volume 6, Issue 1, 2020, Pages 160-170]
  • Azargoman, Majid A Hybrid SVM-RVM Algorithm to Mechanical Properties in the Friction Stir Welding Process [Volume 8, Issue 1, 2022, Pages 36-47]
  • Azimi, Amir H. A Note on the Discharge over Full-width Rectangular Sharp-‎crested Weirs and Weirs of Finite Crest Length‎ [Volume 9, Issue 2, 2023, Pages 458-463]
  • Azimi, Arash Numerical Investigation on Slot air Jet impingement Heat Transfer between Horizontal Concentric Circular Cylinders [Volume 1, Issue 2, 2015, Pages 74-82]
  • Azimova, Dinara Regularization of the Movement of a Material Point Along a Flat ‎Trajectory: Application to Robotics Problems [Volume 7, Issue 3, 2021, Pages 1726-1736]
  • Azizi, A. Low Velocity Impact Response of Laminated Composite Truncated Sandwich Conical Shells with Various Boundary Conditions Using Complete Model and GDQ Method [Volume 3, Issue 1, 2017, Pages 1-15]
  • Azzi, Ahmed Analysis of Fluid Dynamics and Heat Transfer in a Rectangular Duct with Staggered Baffles [Volume 5, Issue 2, 2019, Pages 231-248]
  • Azzi, Ahmed The Solar Air Channels: Comparative Analysis, Introduction of Arc-shaped Fins to Improve the Thermal Transfer [Volume 5, Issue 4, 2019, Pages 616-626]
  • Azzi, Ahmed Fluid Flow and Heat Transfer over Staggered ꞌ+ꞌ Shaped Obstacles [Volume 6, Issue 4, 2020, Pages 741-756]
  • AZZI, Ahmed A Review of Solar Energy Collectors: Models and Applications [Volume 4, Issue 4, 2018, Pages 375-401]

B

  • Babanli, Mustafa Theory and Experiment in Predicting the Strength of Hybrid ‎Fiber Metal Laminates [Volume 9, Issue 4, 2023, Pages 987-999]
  • Babeshko, O.M. About Earthquakes in Subduction Zones with the Potential to ‎Cause a Tsunami [Volume 7, Special Issue, 2021, Pages 1232-1241]
  • Babeshko, Vladimir A. About Earthquakes in Subduction Zones with the Potential to ‎Cause a Tsunami [Volume 7, Special Issue, 2021, Pages 1232-1241]
  • Babu, D. Dastagiri Multivariate Jeffrey Fluid Flow past a Vertical Plate through Porous Medium [Volume 6, Issue 3, 2020, Pages 605-616]
  • Bachiri, Attia On the Thermo-elastic Response of FG-CNTRC Cross-ply ‎Laminated Plates under Temperature Loading using a New HSDT‎ [Volume 8, Issue 4, 2022, Pages 1370-1386]
  • Baghani, Omid A meshless method based on moving Kriging interpolation for the numerical solution of the transient flow of magnetohydrodynamic fractional Maxwell fluid equation [(Articles in Press)]
  • Bahari Kordabad, Arash Emotional Learning Based Intelligent Controller for MIMO Peripheral Milling Process [Volume 6, Issue 3, 2020, Pages 480-492]
  • Bahmyari, Ehsan Investigating the Effects of Air Duct Dimensions on Aeration and Hydrodynamic Characteristics of a Surface-piercing Propeller [Volume 10, Issue 2, 2024, Pages 392-405]
  • Bahoosh, Reza Numerical Simulations of Spoiler’s Effect on a Hatchback and a ‎Sedan Car Exposed to Crosswind Effect‎ [Volume 9, Issue 2, 2023, Pages 346-356]
  • Bahroun, Zied Smart Gas Sensors: Materials, Technologies, Practical ‎Applications, and Use of Machine Learning – A Review [Volume 9, Issue 3, 2023, Pages 775-803]
  • Bakıcıerler, Gizel Conformable Double Sumudu Transform with Applications [Volume 7, Issue 2, 2021, Pages 578-586]
  • Balandin, Vladimir Vl. Experimental Study and Identification of a Dynamic ‎Deformation Model of Dry Clay at Strain Rates up to 2500 s-1‎ [Volume 8, Issue 3, 2022, Pages 981-995]
  • Balandin, Vladimir Vas. Experimental Study and Identification of a Dynamic ‎Deformation Model of Dry Clay at Strain Rates up to 2500 s-1‎ [Volume 8, Issue 3, 2022, Pages 981-995]
  • Baleanu, Dumitru A Novel Approach for Korteweg-de Vries Equation of Fractional Order [Volume 5, Issue 2, 2019, Pages 192-198]
  • Baleanu, Dumitru Exact Solution for Nonlinear Local Fractional Partial Differential Equations [Volume 6, Issue 2, 2020, Pages 200-208]
  • Baleanu, Dumitru Role of Magnetic field on the Dynamical Analysis of Second Grade ‎Fluid: An Optimal Solution subject to Non-integer Differentiable ‎Operators [Volume 7, Issue 1, 2021, Pages 54-68]
  • Baleanu, Dumitru Heat and Mass Transfer of Natural Convective Flow with Slanted ‎Magnetic Field via Fractional Operators [Volume 7, Issue 1, 2021, Pages 189-212]
  • Baleanu, Dumitru Effects of Non-Linear Thermal Radiation and Chemical Reaction ‎on Time Dependent Flow of Williamson Nanofluid With Combine ‎Electrical MHD and Activation Energy [Volume 7, Issue 2, 2021, Pages 546-558]
  • Balla, Chandra Shekar Effect of Chemical Reaction on Bioconvective Flow in Oxytactic Microorganisms Suspended Porous Cavity [Volume 6, Issue 3, 2020, Pages 653-664]
  • Bani Mostafa Arab, Nasrollah Accuracy Assessment of Ultrasonic C-scan and X-ray Radiography Methods for Impact Damage Detection in Glass Fiber Reinforced Polyester Composites [Volume 5, Issue 2, 2019, Pages 258-268]
  • Bano, Zarqa Unsteady Stokes Flow through a Porous Pipe with Periodic Suction and Injection with Slip Conditions [Volume 6, Special Issue, 2020, Pages 1168-1177]
  • Bantes, Fotios Numerical Analysis of the Deformation of a Shearing Machine ‎Tool under Excessive Blade Clearance [Volume 7, Issue 2, 2021, Pages 496-504]
  • Barak, M.S. Thermoelastic Modeling with Dual Porosity Interacting with an Inviscid Liquid [Volume 10, Issue 1, 2024, Pages 111-124]
  • Barman, Tapas Magnetized Bi-convective Nanofluid Flow and Entropy ‎Production Using Temperature-sensitive Base Fluid Properties:‎ A Unique Approach [Volume 8, Issue 4, 2022, Pages 1163-1175]
  • Baron, Thomas Performance measure and tool for benchmarking metaheuristic optimization algorithms [Volume 7, Issue 3, 2021, Pages 1803-1813]
  • Barrett, John Impact Dynamics of Nonlinear Materials: FE Analysis [Volume 9, Issue 3, 2023, Pages 728-738]
  • Barretta, Raffaele Linear dynamic response of nanobeams accounting for higher gradient effects [Volume 2, Issue 2, 2016, Pages 54-64]
  • Barretta, Raffaele Axial and Torsional Free Vibrations of Elastic Nano-Beams by Stress-Driven Two-Phase Elasticity [Volume 5, Issue 2, 2019, Pages 402-413]
  • Basalin, Artem The Direct Impact Method for Studying Dynamic Behavior of ‎Viscoplastic Materials [Volume 8, Issue 2, 2022, Pages 597-604]
  • Basha, H.T. Stability Analysis of Casson Nanofluid Flow over an Extending/Contracting ‎Wedge and Stagnation Point [Volume 8, Issue 2, 2022, Pages 566-579]
  • Basili, Michela Vibration Mitigation of Rail Noise Barriers by Hysteretic Absorbers [Volume 7, Special Issue, 2021, Pages 1205-1217]
  • Bassir, David Sensitivity Analyses of Structural Damage Indicators and ‎Experimental Validations [Volume 7, Issue 2, 2021, Pages 798-810]
  • Bassir, David A Bridge Vibration Measurement Method by UAVs based on CNNs ‎and Bayesian Optimization‎ [Volume 9, Issue 3, 2023, Pages 749-762]
  • Batista, Clauderino da Silva Analysis of Particulate Systems with Numerical Inverse Laplace Transform [Volume 9, Issue 4, 2023, Pages 926-934]
  • Battista, Daniele Linear dynamic response of nanobeams accounting for higher gradient effects [Volume 2, Issue 2, 2016, Pages 54-64]
  • Bég, Osman Anwar ADM Solution for Cu/CuO –Water Viscoplastic Nanofluid ‎Transient Slip Flow from a Porous Stretching Sheet with Entropy ‎Generation, Convective Wall Temperature and Radiative Effects [Volume 7, Issue 3, 2021, Pages 1291-1305]
  • Becker, Wilfried Two-dimensional Stress and strain Analysis for Graphene-‎polymer Nanocomposite under Axial Load [Volume 8, Issue 3, 2022, Pages 1065-1075]
  • Beg, Osman Anwar Multiple Solutions for Slip Effects on Dissipative Magneto-Nanofluid Transport Phenomena in Porous Media: Stability Analysis [Volume 6, Issue 4, 2020, Pages 956-967]
  • Begag, Abdelaziz Numerical Study on Heat Transfer and Pressure Drop in a Mini-‎Channel with Corrugated Walls‎ [Volume 7, Issue 3, 2021, Pages 1306-1314]
  • Behbahaninia, Ali A New Approach for Exergoeconomics Evaluation by Considering ‎Uncertainty with Monte Carlo Method [Volume 9, Issue 1, 2023, Pages 15-24]
  • Behdinan, Kamran Neural Networks with Input Dimensionality Reduction for ‎Efficient Temperature Distribution Prediction in a Warm ‎Stamping Process [Volume 8, Issue 4, 2022, Pages 1431-1444]
  • Behjameh, Mohammad Reza Global Finite Time Synchronization of Two Nonlinear Chaotic Gyros Using High Order Sliding Mode Control [Volume 1, Issue 1, 2015, Pages 26-34]
  • Beiranvand, Peyman Finite Element Analysis for CFST Columns under Blast Loading [Volume 3, Issue 4, 2017, Pages 283-292]
  • Belabed, Zakaria On the Thermomechanical Behavior of Laminated Composite Plates using different Micromechanical-based Models for Coefficients of Thermal Expansion (CTE) [Volume 10, Issue 2, 2024, Pages 224-244]
  • Belghaba, Kacem Exact Solution for Nonlinear Local Fractional Partial Differential Equations [Volume 6, Issue 2, 2020, Pages 200-208]
  • Bellout, Saliha Heat Transfer Improvement in an Open Cubic Cavity using a Hybrid Nanofluid [Volume 7, Issue 3, 2021, Pages 1501-1513]
  • Belov, Alexandr A. Investigation of Wood Properties at Elevated Temperature [Volume 8, Issue 1, 2022, Pages 298-305]
  • Belov, Alexandr Dynamic Response of a Step Loaded Cubic Cavity Embedded in a ‎Partially Saturated Poroelastic Half-space by the Boundary ‎Element Method [Volume 8, Issue 1, 2022, Pages 331-339]
  • Belov, Alexandr The Direct Impact Method for Studying Dynamic Behavior of ‎Viscoplastic Materials [Volume 8, Issue 2, 2022, Pages 597-604]
  • Belyaev, Alexander K. Modeling of Flight of the Line Thrower Projectile [Volume 7, Special Issue, 2021, Pages 1070-1076]
  • BENAISSA, Ali Biomechanical Evaluation of Bone Quality Effect on Stresses at Bone-Implant Interface: A Finite Element Study [Volume 7, Issue 3, 2021, Pages 1266-1275]
  • Benguediab, Mohamed On the Thermomechanical Behavior of Laminated Composite Plates using different Micromechanical-based Models for Coefficients of Thermal Expansion (CTE) [Volume 10, Issue 2, 2024, Pages 224-244]
  • Benhamed, Moez M. Influence of Temperature Pulse on a Nickel Microbeams under Couple Stress Theory [Volume 6, Issue 4, 2020, Pages 777-787]
  • Benkabou, Rim A FEM Multiscale Homogenization Procedure using Nanoindentation for High Performance Concrete [Volume 6, Issue 3, 2020, Pages 493-504]
  • Bento Filho, Antônio Four Legged Guará Robot: From Inspiration to Implementation [Volume 7, Issue 3, 2021, Pages 1425-1434]
  • Bentouba, Said A New Quantum-computing-based Algorithm for Robotic Arms ‎and Rigid Bodies’ Orientation [Volume 7, Issue 3, 2021, Pages 1836-1846]
  • Benzenine, Hamidou Impact of the Narrowing System at Different Locations and ‎Heights on the Performance of a Plane Solar Collector [Volume 8, Issue 4, 2022, Pages 1445-1455]
  • Bertoldi, Marco Thermal Behavior of Monocrystalline Silicon Solar Cells: A ‎Numerical and Experimental Investigation on the Module ‎Encapsulation Materials [Volume 7, Issue 3, 2021, Pages 1847-1855]
  • Bessaim, Aicha Buckling Analysis of Embedded Nanosize FG Beams Based on a Refined Hyperbolic Shear Deformation Theory [Volume 4, Issue 3, 2018, Pages 140-146]
  • Bessaïh, Rachid Heat Transfer Improvement in an Open Cubic Cavity using a Hybrid Nanofluid [Volume 7, Issue 3, 2021, Pages 1501-1513]
  • Bessaïh, Rachid Conjugate Mixed Convection in a Horizontal Cylindrical Duct under the Solid Shell Internal Heat Generation [Volume 7, Issue 2, 2021, Pages 587-597]
  • Bessaїh, Rachid Turbulent Forced Convection and Entropy Generation of ‎Impinging Jets of Water-Al2O3 Nanofluid on Heated Blocks [Volume 7, Issue 4, 2021, Pages 2010-2023]
  • Bezazi, Abderrezak Thermal Behavior of Mesoporous Aramid Fiber Reinforced Silica Aerogel Composite for Thermal Insulation Applications: Microscale Modeling [Volume 10, Issue 1, 2024, Pages 140-151]
  • Bhamare, S. S. Determination of the Optimal Reduction Ratio for Least Springback during Cold Drawing of Seamless Tubes [Volume 4, Issue 4, 2018, Pages 275-285]
  • Bharti, Shipra Spectral Quasi-linearization for MHD Nanofluid Stagnation Boundary Layer Flow due to a Stretching/Shrinking Surface [Volume 6, Issue 4, 2020, Pages 1058-1068]
  • Bhaskara Reddy, K.U. Topology Optimization of Laminated Composite Plates and Shells using Optimality Criteria [Volume 8, Issue 2, 2022, Pages 405-415]
  • Bhaskar Reddy, N. Non-linear Radiation and Navier-slip effects on UCM Nanofluid ‎Flow past a Stretching Sheet under Lorentzian Force [Volume 7, Issue 2, 2021, Pages 638-645]
  • Bhatia, Dinesh Laminar Flow Control and Drag Reduction using Biomimetically ‎Inspired Forward Facing Steps [Volume 7, Issue 2, 2021, Pages 752-763]
  • Bhattacharyya, K. Dufour and Soret Effects on Unsteady Heat and Mass Transfer for Powell-Eyring Fluid Flow over an Expanding Permeable Sheet [Volume 6, Issue 4, 2020, Pages 985-998]
  • Bhatti, Kaleemullah Unsteady Stokes Flow through a Porous Pipe with Periodic Suction and Injection with Slip Conditions [Volume 6, Special Issue, 2020, Pages 1168-1177]
  • Bhikshma, V. On the Six Node Hexagon Elements for Continuum Topology Optimization of Plates Carrying in Plane Loading and Shell Structures Carrying out of Plane Loading [Volume 6, Issue 3, 2020, Pages 617-639]
  • Bhikshma, V. Topology Optimization of Laminated Composite Plates and Shells using Optimality Criteria [Volume 8, Issue 2, 2022, Pages 405-415]
  • Bhowmick, Shubhankar Transient Response of Longitudinal Fins under Step Changes in ‎Base Temperature and Heat Flux using Lattice Boltzmann ‎Method [Volume 8, Issue 3, 2022, Pages 925-939]
  • Bien, Duong Xuan Investigation of Driving Torques at the Joints of Industrial ‎Robot Arms based on the Topology Optimization Technique [Volume 9, Issue 3, 2023, Pages 820-833]
  • Big-Alabo, Akuro Analysis of the Coupled Nonlinear Vibration of a Two-Mass System [Volume 5, Issue 5, 2019, Pages 935-950]
  • Biglari, Hasan Optimum Design of FGX-CNT-Reinforced Reddy Pipes Conveying Fluid Subjected to Moving Load [Volume 2, Issue 4, 2016, Pages 243-253]
  • Bilionis, Ilias Variational Inference for Nonlinear Structural ‎Identification [Volume 7, Special Issue, 2021, Pages 1218-1231]
  • Billah, Khondokar VIV Control Strategies Using Displacement-Based ‎Phenomenological Model [Volume 7, Special Issue, 2021, Pages 1090-1097]
  • Bingamil, Ahmed Ameen On the Usefulness of Pre-processing Methods in Rotating ‎Machines Faults Classification using Artificial Neural Network [Volume 7, Issue 1, 2021, Pages 254-261]
  • Binti Jaafar, Nurul Aini Theoretical Study on Poiseuille Flow of Herschel-Bulkley Fluid in ‎Porous Media‎ [Volume 8, Issue 4, 2022, Pages 1246-1269]
  • Biscaia, Hugo Numerical Analysis on the Bond Performance of Different ‎Anchored Joints under Monotonic and Cyclic Pull-push Loading [Volume 8, Issue 1, 2022, Pages 388-404]
  • Biserni, Cesare Constructal Design of an Idealize Arterial Bypass Graft: Effect of ‎the Bypass Attachment Pointon Resistance to Flow‎ [Volume 7, Issue 1, 2021, Pages 334-344]
  • Biserni, Cesare Prediction Capabilities of a One-dimensional Wall-flow ‎Particulate Filter Model [Volume 8, Issue 1, 2022, Pages 245-259]
  • Bisheh-Niasar, Morteza Moving Mesh Non-standard Finite Difference Method for Non-linear Heat Transfer in a Thin Finite Rod [Volume 4, Issue 3, 2018, Pages 161-166]
  • Bisheh-Niasar, Morteza High Order Compact Finite Difference Schemes for Solving Bratu-Type Equations [Volume 5, Issue 1, 2019, Pages 91-102]
  • Biswal, Uddhaba Investigation of Jeffery-Hamel Flow for Nanofluid in the Presence of Magnetic Field by a New Approach in the Optimal Homotopy Analysis Method [Volume 8, Issue 1, 2022, Pages 48-59]
  • Bohdan, Yurii Numerical Modeling of Heat Transfer and Hydrodynamics in Compact Shifted Arrangement Small Diameter Tube Bundles [Volume 7, Issue 1, 2021, Pages 292-301]
  • Bohlooly, Mehdi Buckling and Postbuckling of Concentrically Stiffened Piezo-Composite Plates on Elastic Foundations [Volume 5, Issue 1, 2019, Pages 128-140]
  • Bondareva, Nadezhda S. The Brick Thermal Performance Improvement using Phase ‎Change Materials [Volume 6, Special Issue, 2020, Pages 1283-1292]
  • Bonnin, Anne-Sophie Finite Element and Experimental Investigation on the Effect of ‎Repetitive Shock in Corrugated Cardboard Packaging [Volume 7, Issue 2, 2021, Pages 820-830]
  • Borawska, Eliza Theoretical Analysis of the Motorcycle Front Brake Heating ‎Process during High Initial Speed Emergency Braking [Volume 6, Special Issue, 2020, Pages 1431-1437]
  • Borawski, Andrzej Theoretical Analysis of the Motorcycle Front Brake Heating ‎Process during High Initial Speed Emergency Braking [Volume 6, Special Issue, 2020, Pages 1431-1437]
  • Borges, Julian Alves Proportional Topology Optimization under ‎Reliability-based Constraints [Volume 8, Issue 1, 2022, Pages 319-330]
  • Borges, Julian Alves A Novel BESO Methodology for Topology Optimization of ‎Reinforced Concrete Structures: A Two-loop Approach [Volume 9, Issue 2, 2023, Pages 498-512]
  • Borgheipour, Hasti Economic Evaluation of Supplying Commercial Thermal Load by ‎a New CPVT System: A Case Study in Iran [Volume 9, Issue 2, 2023, Pages 371-383]
  • Boroushaki, Mehrdad Emotional Learning Based Intelligent Controller for MIMO Peripheral Milling Process [Volume 6, Issue 3, 2020, Pages 480-492]
  • Borzenko, Evgeny I. Flow Structure when Filling a Channel with a Curable Liquid [Volume 9, Issue 1, 2023, Pages 195-204]
  • Botello, Salvador Discretization of the 2D Convection–Diffusion Equation Using ‎Discrete Exterior Calculus [Volume 6, Special Issue, 2020, Pages 1348-1363]
  • Boucham, Belhadj On the Thermomechanical Behavior of Laminated Composite Plates using different Micromechanical-based Models for Coefficients of Thermal Expansion (CTE) [Volume 10, Issue 2, 2024, Pages 224-244]
  • Boudebous, Saadoun Mixed Convection Heat Transfer and Entropy Generation in a ‎Water-filled Square Cavity Partially Heated from Below: The ‎Effects of Richardson and Prandtl Numbers [Volume 8, Issue 1, 2022, Pages 282-297]
  • Boudraa, Bouziane Turbulent Forced Convection and Entropy Generation of ‎Impinging Jets of Water-Al2O3 Nanofluid on Heated Blocks [Volume 7, Issue 4, 2021, Pages 2010-2023]
  • Boughaleb, Yahia Scaling Law of Permeability and Porosity for Fluid Transport ‎Phenomena in Porous PCM Media [Volume 7, Issue 1, 2021, Pages 84-92]
  • Boulahia, Z. Magneto Casson-Carreau Fluid Flow through a Circular Porous ‎Cylinder with Partial Slip‎ [Volume 8, Issue 4, 2022, Pages 1208-1221]
  • Bozdogan, K. Burak A Method for Determination of the Fundamental Period of Layered Soil Profiles [Volume 3, Issue 4, 2017, Pages 267-273]
  • Bragov, Anatoliy The Direct Impact Method for Studying Dynamic Behavior of ‎Viscoplastic Materials [Volume 8, Issue 2, 2022, Pages 597-604]
  • Bragov, Anatoliy M. Investigation of Wood Properties at Elevated Temperature [Volume 8, Issue 1, 2022, Pages 298-305]
  • Bragov, Anatoly Experimental Study and Identification of a Dynamic ‎Deformation Model of Dry Clay at Strain Rates up to 2500 s-1‎ [Volume 8, Issue 3, 2022, Pages 981-995]
  • Brandl, Andreas Stress Control of a Piezoelectric Lumped-element Model − ‎Theoretical Investigation and Experimental Realization [Volume 7, Special Issue, 2021, Pages 1110-1120]
  • Brito, Alejandro Refined Cross-sample Entropy based on Freedman-Diaconis Rule: ‎Application to Foreign Exchange Time Series [Volume 8, Issue 3, 2022, Pages 1005-1013]
  • Bureerat, Sujin Sweep Blade Design for an Axial Wind Turbine using a Surrogate-‎assisted Differential Evolution Algorithm [Volume 9, Issue 1, 2023, Pages 217-225]
  • Burmasheva, Natalya Inhomogeneous Gradient Poiseuille Flows of a Vertically Swirled Fluid [Volume 10, Issue 1, 2024, Pages 1-12]
  • Bustamante, R. Finite Deformations of Fibre-reinforced Elastic Solids with ‎Fibre Bending Stiffness: A Spectral Approach [Volume 8, Issue 4, 2022, Pages 1332-1342]

C

  • C, Veeresh Effects of Thermal Diffusion and Radiation on Magnetohydrodynamic (MHD) Chemically Reacting Fluid Flow Past a Vertical Plate in a Slip Flow Regime [Volume 5, Issue 2, 2019, Pages 334-343]
  • Cárdenas, Diego Measuring Crack-type Damage Features in Thin-walled ‎Composite Beams using De-noising and a 2D Continuous Wavelet ‎Transform of Mode Shapes [Volume 7, Issue 1, 2021, Pages 355-371]
  • Cárdenas, Diego In-Plane Shear-Axial Strain Coupling Formulation for Shear-‎Deformable Composite Thin-Walled Beams [Volume 7, Issue 2, 2021, Pages 450-469]
  • Califano, Filippo A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part I: Analytical Methods and Computational Algorithms [Volume 9, Issue 2, 2023, Pages 529-549]
  • Califano, Filippo A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part II: Numerical Analysis and Experimental Testing [Volume 9, Issue 2, 2023, Pages 550-589]
  • Campos, Damián Federico Self-damping of Optical Ground Wire‎ Cables: A Bayesian Approach [Volume 9, Issue 1, 2023, Pages 205-216]
  • Campos Velho, Haroldo F. Damage Identification in a Multi-DOF System under Uncertainties Using Optimization Algorithms [Volume 4, Issue 4, 2018, Pages 365-374]
  • Can, Nihat The Relations between the Various Critical Temperatures of Thin ‎FGM Plates [Volume 6, Special Issue, 2020, Pages 1404-1419]
  • Candiotti, S. Evaluation of the Best New Cross-ply Laminated Plate Theories through the Axiomatic/Asymptotic Approach [Volume 4, Issue 4, 2018, Pages 331-351]
  • Cao, Xiao-Qun Different Groups of Variational Principles for Whitham-Broer-‎Kaup Equations in Shallow Water [Volume 6, Special Issue, 2020, Pages 1178-1183]
  • Cao, Xiao-Qun Variational Principles for Two Compound Nonlinear Equations ‎with Variable Coefficients [Volume 7, Issue 2, 2021, Pages 415-421]
  • Cao, Xiao-Qun Variational Principles and Solitary Wave Solutions of Generalized ‎Nonlinear Schrödinger Equation in the Ocean [Volume 7, Issue 3, 2021, Pages 1639-1648]
  • Cao, Xiao-Qun New Variational Principles for Two Kinds of Nonlinear Partial Differential Equation in Shallow Water [Volume 10, Issue 2, 2024, Pages 406-412]
  • Carbas, Ricardo Effect of Temperature and Moisture on the Impact Behaviour of ‎Adhesive Joints for the Automotive Industry [Volume 7, Issue 3, 2021, Pages 1488-1500]
  • Carbas, Ricardo J.C. Study of Hybrid Composite Joints with Thin-ply-reinforced Adherends under High-rate and Impact Loadings [Volume 10, Issue 2, 2024, Pages 260-271]
  • Cardenas, Diego Generation of a Quadrilateral Mesh based on NURBS for Gyroids ‎of Variable Thickness and Porosity [Volume 8, Issue 2, 2022, Pages 684-698]
  • Carpinteri, Alberto Long-span Suspension Bridge Flutter Analysis ‎with Drag Force Effects [Volume 7, Special Issue, 2021, Pages 1077-1089]
  • Casagrande, Daniele Direct Transcription Approach to Dynamic Optimization Problems in Engineering [Volume 8, Issue 2, 2022, Pages 605-616]
  • Casalotti, Arnaldo Improving the linear stability of the visco-elastic Beck's beam via piezoelectric controllers [Volume 7, Special Issue, 2021, Pages 1098-1109]
  • Casas, Walter Jesus Paucar A Novel BESO Methodology for Topology Optimization of ‎Reinforced Concrete Structures: A Two-loop Approach [Volume 9, Issue 2, 2023, Pages 498-512]
  • Casciati, Sara Editorial [Volume 7, Special Issue, 2021]
  • Casini, Paolo Vibration Mitigation of Rail Noise Barriers by Hysteretic Absorbers [Volume 7, Special Issue, 2021, Pages 1205-1217]
  • Castagna, Pierre Reducing Retrieval Time in Automated Storage and Retrieval System with a Gravitational Conveyor Based on Multi-Agent Systems [Volume 4, Issue 1, 2018, Pages 55-68]
  • Castro, A.J. Application of Breakage Models to Particle Speeds Simulated by Discrete Element Methods [Volume 10, Issue 2, 2024, Pages 245-259]
  • Castro, M.A. Application of Breakage Models to Particle Speeds Simulated by Discrete Element Methods [Volume 10, Issue 2, 2024, Pages 245-259]
  • Cattani, Carlo A New Class of Linear Canonical Wavelet Transform [Volume 10, Issue 1, 2024, Pages 64-79]
  • Cattani, Piercarlo Sizing the Actuators for a Dragon Fly Prototype [Volume 10, Issue 1, 2024, Pages 152-163]
  • Ceballos Zuluaga, Jorge Mario Fluid-dynamic Simulations for Assessment of Dimensioning ‎Methodologies of Pelton Turbine Buckets Considering the Initial ‎Torque Overcoming [Volume 9, Issue 4, 2023, Pages 1036-1048]
  • Chaabelasri, Elmiloud Random Walk Particle Tracking for Convection-diffusion ‎Dominated Problems in Shallow Water Flows [Volume 7, Issue 2, 2021, Pages 486-495]
  • Chaimahawan, Preeda Shear-flexure Interaction Frame Model on Kerr-type Foundation ‎for Analysis of Non-ductile RC Members on Foundation [Volume 8, Issue 3, 2022, Pages 1076-1090]
  • Chakraborty, Himadri Shekhar Numerical Investigation on Flow Transition through a Curved ‎Square Duct with Negative Rotation [Volume 7, Issue 3, 2021, Pages 1435-1447]
  • Chakraverty, S. Residual Power Series Method for Solving Time-fractional Model of Vibration Equation of Large Membranes [Volume 5, Issue 4, 2019, Pages 603-615]
  • Chakraverty, S. Dynamic Response Analysis of Fractionally Damped Beams Subjected to External Loads using Homotopy Analysis Method [Volume 5, Issue 2, 2019, Pages 355-366]
  • Chakraverty, Snehashish Investigation of Jeffery-Hamel Flow for Nanofluid in the Presence of Magnetic Field by a New Approach in the Optimal Homotopy Analysis Method [Volume 8, Issue 1, 2022, Pages 48-59]
  • Chalandon, Pierre Using the Finite Element Analysis Method to Study the 3-point Bending Test for the Characterization of the Adherence [Volume 6, Issue 3, 2020, Pages 505-516]
  • Chamkha, Ali J. Free Convection Flow of an Electrically-Conducting Micropolar Fluid between Parallel Porous Vertical Plates Using Differential Transform [Volume 4, Issue 4, 2018, Pages 286-298]
  • Chamkha, Ali J. A Review of Solar Energy Collectors: Models and Applications [Volume 4, Issue 4, 2018, Pages 375-401]
  • Chamkha, Ali J. Analysis of Fluid Dynamics and Heat Transfer in a Rectangular Duct with Staggered Baffles [Volume 5, Issue 2, 2019, Pages 231-248]
  • Chamkha, Ali J. Fluid Flow and Heat Transfer over Staggered ꞌ+ꞌ Shaped Obstacles [Volume 6, Issue 4, 2020, Pages 741-756]
  • Chamkha, Ali J. Viscous Dissipation Impact on Free Convection Flow of Cu-water Nanofluid in a Circular Enclosure with Porosity Considering Internal Heat Source [Volume 5, Issue 4, 2019, Pages 717-726]
  • Chamkha, Ali J. Non-similar Solutions of MHD Mixed Convection over an Exponentially Stretching Surface: Influence of Non-uniform Heat Source or Sink [Volume 7, Issue 3, 2021, Pages 1334-1347]
  • Chamkha, Ali J. Heating Capacity of an Earth to Air Heat Exchanger in Arid Regions - Experimental Investigation [Volume 8, Issue 2, 2022, Pages 429-437]
  • Chamkha, Ali J. Thermal-Aerodynamic Performance Measurement of Air Heat ‎Transfer Fluid Mechanics over S-shaped Fins in Shell-and-tube ‎Heat Exchangers [Volume 7, Issue 4, 2021, Pages 1931-1943]
  • Chamkha, Ali J. Hydrodynamic Behavior in Solar Oil Heat Exchanger Ducts Fitted ‎with Staggered Baffles and Fins [Volume 8, Issue 3, 2022, Pages 774-790]
  • Chamkha, Ali J. Editorial [Volume 6, Special Issue, 2020]
  • Chamkha, Ali J. Magnetized Bi-convective Nanofluid Flow and Entropy ‎Production Using Temperature-sensitive Base Fluid Properties:‎ A Unique Approach [Volume 8, Issue 4, 2022, Pages 1163-1175]
  • Chamkha, Ali J. Heat Transfer Improvement in a Thermal Energy Storage System ‎using Auxiliary Fluid Instead of Nano-PCM in an Inclined ‎Enclosure: A Comparative Study [Volume 9, Issue 2, 2023, Pages 475-486]
  • Chamkha, Ali. J The Solar Air Channels: Comparative Analysis, Introduction of Arc-shaped Fins to Improve the Thermal Transfer [Volume 5, Issue 4, 2019, Pages 616-626]
  • Chamkha, Ali. J Numerical Simulation of Unsteady Flow toward a Stretching/Shrinking Sheet in Porous Medium Filled with a Hybrid Nanofluid [Volume 8, Issue 1, 2022, Pages 11-20]
  • Chamkha, Ali. J. Theoretical Study of Convective Heat Transfer in Ternary ‎Nanofluid Flowing past a Stretching Sheet [Volume 8, Issue 4, 2022, Pages 1279-1286]
  • Chamkha, Ali Jawad Thermal Behavior of Mesoporous Aramid Fiber Reinforced Silica Aerogel Composite for Thermal Insulation Applications: Microscale Modeling [Volume 10, Issue 1, 2024, Pages 140-151]
  • Chamoret, Dominique Performance measure and tool for benchmarking metaheuristic optimization algorithms [Volume 7, Issue 3, 2021, Pages 1803-1813]
  • Chandrasekhar, K.N.V. Isogeometric Topology Optimization of Continuum Structures using an Evolutionary Algorithm [Volume 5, Issue 2, 2019, Pages 414-440]
  • Chandrasekhar, K.N.V. On the Six Node Hexagon Elements for Continuum Topology Optimization of Plates Carrying in Plane Loading and Shell Structures Carrying out of Plane Loading [Volume 6, Issue 3, 2020, Pages 617-639]
  • Chandrasekhar, K.N.V. Topology Optimization of Laminated Composite Plates and Shells using Optimality Criteria [Volume 8, Issue 2, 2022, Pages 405-415]
  • Chang, Heng Thermal Buckling Analysis of Functionally Graded Euler-Bernoulli Beams with Temperature-dependent Properties [Volume 6, Issue 3, 2020, Pages 457-470]
  • Charan, Pal Ranjan Sasti Analysis and Optimization of Truss Structures, Constrained ‎Handling using Genetic Algorithm [Volume 7, Issue 3, 2021, Pages 1324-1333]
  • Charles, Terrance Assessment of Drag Reduction Devices Mounted on a Simplified ‎Tractor-Trailer Truck Model [Volume 7, Issue 1, 2021, Pages 45-53]
  • Charles, Terrance Computational Study of Flow around 2D and 3D Tandem Bluff Bodies [Volume 7, Issue 2, 2021, Pages 528-534]
  • Chatzi, Eleni N. On the Active Vibration Control of Nonlinear Uncertain Structures [Volume 7, Special Issue, 2021, Pages 1183-1197]
  • Chaudhary, Soniya Mechanics of 2D Elastic Stress Waves Propagation Impacted by Concentrated Point Source Disturbance in Composite Material Bars [Volume 6, Issue 4, 2020, Pages 788-800]
  • Chaudhary, Soniya Scattering and Backscattering Study of Mechanical Plane Wave in Composite Materials Plates (Earth model 1066B and LiNbO3) [Volume 8, Issue 2, 2022, Pages 518-527]
  • Chau-Dinh, Thanh Nonlinear Bending Analysis of Functionally Graded Plates Using SQ4T Elements based on Twice Interpolation Strategy [Volume 6, Issue 1, 2020, Pages 125-136]
  • Chau-Dinh, Thanh An 8-Node Solid-Shell Finite Element based on Assumed Bending ‎Strains and Cell-Based Smoothed Membrane Strains for Static Analysis of Plates and Shells [Volume 6, Special Issue, 2020, Pages 1335-1347]
  • Chaurasia, Anju Numerical Scheme based on Non-polynomial Spline Functions for ‎the System of Second Order Boundary Value Problems arising in ‎Various Engineering Applications [Volume 8, Issue 1, 2022, Pages 144-152]
  • Chavarette, Fábio Roberto Analysis and Recognition of Standards in Intelligent Hybrid ‎Systems using Natural Computing [Volume 7, Issue 3, 2021, Pages 1764-1773]
  • Chavarette, Fábio Roberto Prognosis and Detection of Experimental Failures in Open Field Diesel ‎Engines Applying Wiener's Artificial Immunological Systems [Volume 7, Issue 1, 2021, Pages 1-12]
  • Chen, Chun-Sheng Thermal Buckling Analysis of Functionally Graded Euler-Bernoulli Beams with Temperature-dependent Properties [Volume 6, Issue 3, 2020, Pages 457-470]
  • Chen, Chun-Sheng Dynamic Response of Functionally Graded Carbon ‎Nanotube-Reinforced Hybrid Composite Plates [Volume 8, Issue 1, 2022, Pages 182-195]
  • Chen, Gongfa Sensitivity Analyses of Structural Damage Indicators and ‎Experimental Validations [Volume 7, Issue 2, 2021, Pages 798-810]
  • Chen, Gongfa A Bridge Vibration Measurement Method by UAVs based on CNNs ‎and Bayesian Optimization‎ [Volume 9, Issue 3, 2023, Pages 749-762]
  • Chen, Rou Scalings of Inverse Energy Transfer and Energy Decay in 3-D Decaying Isotropic Turbulence with Non-rotating or Rotating Frame of Reference [Volume 5, Issue 4, 2019, Pages 639-646]
  • Chen, Wei-Ren Thermal Buckling Analysis of Functionally Graded Euler-Bernoulli Beams with Temperature-dependent Properties [Volume 6, Issue 3, 2020, Pages 457-470]
  • Chen, Wei-Ren Dynamic Response of Functionally Graded Carbon ‎Nanotube-Reinforced Hybrid Composite Plates [Volume 8, Issue 1, 2022, Pages 182-195]
  • Chen, Xiao Alternative Integration Approaches in the Weight Function ‎Method for Crack Problems [Volume 7, Issue 3, 2021, Pages 1719-1725]
  • Cheraghbak, Ali Magnetic Field Effects on the Elastic Behavior of Polymeric Piezoelectric Cylinder Reinforced with CNTs [Volume 2, Issue 4, 2016, Pages 222-229]
  • Che Sidik, Nor Azwadi Moving Least Squares Method and its Improvement: A Concise Review [Volume 7, Issue 2, 2021, Pages 883-889]
  • Chhabra, Vishal Effect of Magnetic Field on Viscous Flow through Composite ‎Porous Channel using Boundary Element Method [Volume 9, Issue 4, 2023, Pages 1016-1035]
  • Chien, Trinh Minh Nonlinear Dynamic Response of Functionally Graded Porous Plates on Elastic Foundation Subjected to Thermal and Mechanical Loads [Volume 4, Issue 4, 2018, Pages 245-259]
  • Chiremsel, Rachid Numerical Investigation of an Unsteady and Anisotropic Turbulent ‎Flow Downstream a 90° Bend Pipe with and without Ribs [Volume 7, Issue 3, 2021, Pages 1620-1638]
  • Chiremsel, Zakarya Numerical Investigation of an Unsteady and Anisotropic Turbulent ‎Flow Downstream a 90° Bend Pipe with and without Ribs [Volume 7, Issue 3, 2021, Pages 1620-1638]
  • Chirkov, Artyom O. Influence of Up-down-up Constitutive Equation Parameters on ‎Yield Plateau Stage of Mild Steel Samples Subjected to Stretching [Volume 8, Issue 4, 2022, Pages 1315-1323]
  • Cho, Hancheol On Robust Adaptive PD Control of Robot Manipulators [Volume 6, Special Issue, 2020, Pages 1450-1466]
  • Chouaf, Abdelkerim Comparative Study of the Spectral Method, DISPERSE and Other ‎Classical Methods for Plotting the Dispersion Curves in ‎Anisotropic Plates [Volume 9, Issue 4, 2023, Pages 955-973]
  • Civalek, Omer Free Vibration of Annular Plates by Discrete Singular Convolution and Differential Quadrature Methods [Volume 2, Issue 3, 2016, Pages 128-133]
  • Civalek, Omer Bending Response of Nanobeams Resting on Elastic Foundation [Volume 4, Issue 2, 2018, Pages 105-114]
  • Civalek, Omer Optimum Design of Nano-Scaled Beam Using the Social Spider Optimization (SSO) Algorithm [Volume 7, Issue 3, 2021, Pages 1348-1361]
  • Civalek, Ömer Deflection of a hyperbolic shear deformable microbeam under a concentrated load [Volume 2, Issue 2, 2016, Pages 65-73]
  • Civalek, Ömer Application of Newmark Average Acceleration and Ritz Methods ‎on Dynamical Analysis of Composite Beams under a Moving Load [Volume 8, Issue 2, 2022, Pages 764-773]
  • Civalek, Ömer A Novel Approach to Fully Nonlinear Mathematical Modeling of ‎Tectonic Plates [Volume 9, Issue 2, 2023, Pages 430-444]
  • Clarke, Alastair On the Use of Acoustic Emission and Digital Image Correlation for Welded Joints Damage Characterization [Volume 5, Issue 2, 2019, Pages 381-389]
  • Clarke, Lauren Elizabeth Accelerating the Convergence of Multiphase Flow Simulations ‎when Employing Non-Uniform Structured Grids [Volume 7, Issue 1, 2021, Pages 235-253]
  • Clementi, Francesco Natural frequencies and internal resonance of beams with arbitrarily distributed axial loads [Volume 7, Special Issue, 2021, Pages 1009-1019]
  • Concli, Franco Numerical Modeling of Fluid’s Aeration: Analysis of the Power ‎Losses and Lubricant Distribution in Gearboxes [Volume 9, Issue 1, 2023, Pages 83-94]
  • Conde, José Manuel Paixão WaveMIMO Methodology: Numerical Wave Generation of a ‎Realistic Sea State‎ [Volume 7, Issue 4, 2021, Pages 2129-2148]
  • Contreras-Reyes, Javier E. Refined Cross-sample Entropy based on Freedman-Diaconis Rule: ‎Application to Foreign Exchange Time Series [Volume 8, Issue 3, 2022, Pages 1005-1013]
  • Cuadrado Sempere, Óscar Mechanical Characterisation and Comparison of Hyperelastic ‎Adhesives: Modelling and Experimental Validation [Volume 8, Issue 1, 2022, Pages 359-369]
  • Cuba, Lizbeth Generalized 2-Unknown’s HSDT to Study Isotropic and Orthotropic Composite Plates [Volume 5, Issue 1, 2019, Pages 141-149]
  • Cuba, Lizbeth Bending and Free Vibration Analysis of Functionally Graded Plates via Optimized Non-polynomial Higher Order Theories [Volume 5, Issue 2, 2019, Pages 281-298]
  • Cui, Fangsen A Bridge Vibration Measurement Method by UAVs based on CNNs ‎and Bayesian Optimization‎ [Volume 9, Issue 3, 2023, Pages 749-762]
  • Cunedioglu, Yusuf Free Vibration Analysis of Functionally Graded Beams with Cracks [Volume 6, Issue 4, 2020, Pages 908-919]
  • Curcino, Ingrid V. Hybrid Solution for the Analysis of MHD Micropolar Fluid Flow in a Vertical Porous Parallel-Plates Duct [Volume 6, Special Issue, 2020, Pages 1107-1124]

D

  • Daikh, Ahmed A. Bending of Functionally Graded Sandwich Nanoplates Resting on ‎Pasternak Foundation under Different Boundary Conditions [Volume 6, Special Issue, 2020, Pages 1245-1259]
  • Daikh, Ahmed Amine On the Thermo-elastic Response of FG-CNTRC Cross-ply ‎Laminated Plates under Temperature Loading using a New HSDT‎ [Volume 8, Issue 4, 2022, Pages 1370-1386]
  • Dairo, O U Analytical Investigations of the Effects of Tool Pin Profile and Process Parameters on the Peak Temperature in Friction Stir Welding [Volume 3, Issue 2, 2017, Pages 114-124]
  • Dairo, U O Modeling of heat generations for different tool profiles in friction stir welding: study of tool geometry and contact conditions [Volume 3, Issue 1, 2017, Pages 37-59]
  • Damrongwiriyanupap, Nattapong Nonlinear Winkler-based Frame Element with Inclusion of Shear-Flexure Interaction Effect for Analysis of Non-Ductile RC Members on Foundation [Volume 7, Issue 1, 2021, Pages 148-164]
  • Damrongwiriyanupap, Nattapong Shear-flexure Interaction Frame Model on Kerr-type Foundation ‎for Analysis of Non-ductile RC Members on Foundation [Volume 8, Issue 3, 2022, Pages 1076-1090]
  • Daneshmand, Farhang Nonlinear transversely vibrating beams by the homotopy perturbation method with an auxiliary term [Volume 1, Issue 1, 2015, Pages 1-9]
  • Daneshmehr, Ali Reza Analytical bending solution of fully clamped orthotropic rectangular plates resting on elastic foundations by the finite integral transform method [Volume 1, Issue 2, 2015, Pages 52-58]
  • Daneshmehr, Ali Reza Study on Free Vibration and Wave Power Reflection in Functionally Graded Rectangular Plates using Wave Propagation Approach [Volume 5, Issue 1, 2019, Pages 77-90]
  • Danish, Gulzar Ahmad Effects of Non-Linear Thermal Radiation and Chemical Reaction ‎on Time Dependent Flow of Williamson Nanofluid With Combine ‎Electrical MHD and Activation Energy [Volume 7, Issue 2, 2021, Pages 546-558]
  • Daoud, Monzer Effect of Coating Materials on the Fatigue Behavior of Hip Implants: A Three-dimensional Finite Element Analysis [Volume 6, Issue 2, 2020, Pages 284-295]
  • Da Rocha, Fabio Carlos Analytical Expressions for the Singularities Treatment in the ‎Three-dimensional Elastostatic Boundary Element Method [Volume 7, Issue 2, 2021, Pages 739-751]
  • Da Rocha, Fabio Carlos Analysis of High-order Approximations by Spectral Interpolation Applied to One- and Two-dimensional Finite Element Method [Volume 6, Issue 1, 2020, Pages 145-159]
  • Darus, Maslina Applications of Higher-Order Derivatives to the Subclasses of ‎Meromorphic Starlike Functions [Volume 7, Issue 1, 2021, Pages 321-333]
  • Darwich, Ayham Effect of Coating Materials on the Fatigue Behavior of Hip Implants: A Three-dimensional Finite Element Analysis [Volume 6, Issue 2, 2020, Pages 284-295]
  • Das, Raj Lamb Wave Analysis in Anisotropic Multilayer ‎Piezoelectric-piezomagnetic Material [Volume 8, Issue 2, 2022, Pages 629-640]
  • Dash, A.K. Free Convection of Micropolar Fluid over an Infinite Inclined ‎Moving Porous Plate [Volume 8, Issue 4, 2022, Pages 1154-1162]
  • Dastjerdi, Shahriar A Novel Approach to Fully Nonlinear Mathematical Modeling of ‎Tectonic Plates [Volume 9, Issue 2, 2023, Pages 430-444]
  • Davar, Ali Experimental and Numerical Buckling Analysis of Carbon Fiber Composite Lattice Conical Structure before and after Lateral Impact [Volume 6, Issue 4, 2020, Pages 813-822]
  • Davesac, Rodrigo Rocha Numerical Study and Geometric Investigation of Corrugated ‎Channels Subjected to Forced Convective Flows [Volume 7, Issue 2, 2021, Pages 727-738]
  • Davodi, Amin Thermal Analysis of Radiating Film Flow of Sodium Alginate ‎using MWCNT Nanoparticles ‎ [Volume 8, Issue 1, 2022, Pages 219-231]
  • De Felice, Alessandro Stability Analysis of Articulated Bus in Straight-ahead Running Manoeuvre [Volume 7, Issue 3, 2021, Pages 1649-1662]
  • De Felice, Alessandro Multibody Efficiency Analysis of Chain Drives in Racing Motorcycles [Volume 8, Issue 3, 2022, Pages 1091-1102]
  • Dehghani, Reza Distributed-parameter Dynamic Modeling and Bifurcation Analysis of a Trapezoidal Piezomagnetoelastic Energy Harvester [Volume 8, Issue 1, 2022, Pages 97-113]
  • Dehraj, Sanaullah Asymptotic Approximations of the Solution for a Traveling String under Boundary Damping [Volume 5, Issue 5, 2019, Pages 918-925]
  • Delavari, Hadi Global Finite Time Synchronization of Two Nonlinear Chaotic Gyros Using High Order Sliding Mode Control [Volume 1, Issue 1, 2015, Pages 26-34]
  • Delavari, Hadi Fuzzy Modeling and Synchronization of a New Hyperchaotic Complex System with Uncertainties [Volume 1, Issue 3, 2015, Pages 134-144]
  • Delgado-Gutiérrez, Arturo Generation of a Quadrilateral Mesh based on NURBS for Gyroids ‎of Variable Thickness and Porosity [Volume 8, Issue 2, 2022, Pages 684-698]
  • Delgado-Gutierrez, Arturo In-Plane Shear-Axial Strain Coupling Formulation for Shear-‎Deformable Composite Thin-Walled Beams [Volume 7, Issue 2, 2021, Pages 450-469]
  • Delkhosh, Mehdi An Efficient Numerical Method to Solve the Boundary Layer Flow of an Eyring-Powell Non-Newtonian Fluid [Volume 5, Issue 2, 2019, Pages 454-467]
  • DELLA, Noureddine Biomechanical Evaluation of Bone Quality Effect on Stresses at Bone-Implant Interface: A Finite Element Study [Volume 7, Issue 3, 2021, Pages 1266-1275]
  • Demir, Cigdem Bending Response of Nanobeams Resting on Elastic Foundation [Volume 4, Issue 2, 2018, Pages 105-114]
  • Demirkoparan, Hasan Bifurcation of Fiber-Reinforced Cylindrical Membranes under ‎Extension, Inflation, and Swelling [Volume 9, Issue 1, 2023, Pages 113-128]
  • De Rosa, Maria Anna Variational Derivation of Truncated Timoshenko-Ehrenfest Beam Theory [Volume 8, Issue 3, 2022, Pages 996-1004]
  • De Rossi, Lorenzo Multibody Efficiency Analysis of Chain Drives in Racing Motorcycles [Volume 8, Issue 3, 2022, Pages 1091-1102]
  • Dertimanis, Vasilis K. On the Active Vibration Control of Nonlinear Uncertain Structures [Volume 7, Special Issue, 2021, Pages 1183-1197]
  • Dezvareh, Reza Evaluation of Turbulence on the Dynamics of Monopile Offshore Wind Turbine under the Wave and Wind Excitations [Volume 5, Issue 4, 2019, Pages 704-716]
  • Dezvareh, Reza Upgrading the Seismic Capacity of Pile-Supported Wharfs Using Semi-Active Liquid Column Gas Damper [Volume 6, Issue 1, 2020, Pages 112-124]
  • Dhaiban, Hussein T. The Optimal Design of Heat Sinks: A Review [Volume 6, Issue 4, 2020, Pages 1030-1043]
  • Dharmaiah, Gurram Magnetic Field Influence on Thermophoretic Micropolar Fluid Flow over an Inclined Permeable Surface: A Numerical Study [Volume 10, Issue 2, 2024, Pages 369-382]
  • Dikmen, Fatih Buckling Analysis of Functionally Graded Shells under Mixed ‎Boundary ‎Conditions Subjected to Uniform Lateral Pressure [Volume 7, Issue 1, 2021, Pages 345-354]
  • Dinarvand, Saeed MHD Flow and Heat Transfer of SiC-TiO2/DO Hybrid Nanofluid due to a Permeable Spinning Disk by a Novel Algorithm [Volume 5, Issue 5, 2019, Pages 976-988]
  • Dinarvand, Saeed Numerical Simulation of Unsteady Flow toward a Stretching/Shrinking Sheet in Porous Medium Filled with a Hybrid Nanofluid [Volume 8, Issue 1, 2022, Pages 11-20]
  • Dinh Duc, Nguyen Nonlinear Dynamic Response of Functionally Graded Porous Plates on Elastic Foundation Subjected to Thermal and Mechanical Loads [Volume 4, Issue 4, 2018, Pages 245-259]
  • Dipasquale, Daniele A Stress Tensor-based Failure Criterion for Ordinary State-based ‎Peridynamic Models‎ [Volume 8, Issue 2, 2022, Pages 617-628]
  • Di Re, Paolo Computational Enhancement of a Mixed 3D Beam Finite Element with Warping and Damage [Volume 8, Issue 1, 2022, Pages 260-281]
  • Divya, B.B. Effects of Inclined Magnetic Field and Porous Medium on Peristaltic Flow of a Bingham Fluid with Heat Transfer [Volume 7, Issue 4, 2021, Pages 1892-1906]
  • Diwakar Reddy, V. Experimental Investigation on Radial Ball Bearing Parameters Using Taguchi Method [Volume 4, Issue 1, 2018, Pages 69-74]
  • Djebali, Ridha Thermal Behavior of Mesoporous Aramid Fiber Reinforced Silica Aerogel Composite for Thermal Insulation Applications: Microscale Modeling [Volume 10, Issue 1, 2024, Pages 140-151]
  • Djermane, Mohamed Numerical Study of the Dynamic Response of Elevated Steel ‎Conical Tank under Vertical Seismic Excitation - Case Study [Volume 9, Issue 2, 2023, Pages 445-457]
  • Dlamini, Phumlani An Efficient Spectral Method-based Algorithm for Solving a ‎High-dimensional Chaotic Lorenz System [Volume 7, Issue 1, 2021, Pages 225-234]
  • Do, Thanh Binh Multilevel Modeling of 1-3 Piezoelectric Energy Harvester Based ‎on Porous Piezoceramics [Volume 9, Issue 3, 2023, Pages 763-774]
  • Doan, Trac Luat Free Vibration Analysis of Functionally Graded Porous Nano-‎plates with Different Shapes Resting on Elastic Foundation [Volume 7, Issue 3, 2021, Pages 1593-1605]
  • Dogonchi, Abdul Sattar Viscous Dissipation Impact on Free Convection Flow of Cu-water Nanofluid in a Circular Enclosure with Porosity Considering Internal Heat Source [Volume 5, Issue 4, 2019, Pages 717-726]
  • Doh, Deog-Hee Impact of Magnetic Field on Convective Flow of a Micropolar Fluid with two Parallel Heat Source [Volume 5, Issue 4, 2019, Pages 652-666]
  • Doh, Deog-Hee Unsteady Separated Stagnation Point Flow of Nanofluid past a ‎Moving Flat Surface in the Presence of Buongiorno's Model [Volume 7, Issue 3, 2021, Pages 1283-1290]
  • Dolon, Shamsun Naher Numerical Investigation on Flow Transition through a Curved ‎Square Duct with Negative Rotation [Volume 7, Issue 3, 2021, Pages 1435-1447]
  • Domingues dos Santos, Elizaldo Multiobjective Geometric Analysis of Stiffened Plates under ‎Bending through Constructal Design Method [Volume 6, Special Issue, 2020, Pages 1438-1449]
  • Domingues dos Santos, Elizaldo WaveMIMO Methodology: Numerical Wave Generation of a ‎Realistic Sea State‎ [Volume 7, Issue 4, 2021, Pages 2129-2148]
  • Domiri Ganji, Davood An Efficient Numerical Method to Solve the Boundary Layer Flow of an Eyring-Powell Non-Newtonian Fluid [Volume 5, Issue 2, 2019, Pages 454-467]
  • Dong, Chensong Multi-objective Optimal Design of Carbon and Glass Reinforced ‎Hybrid Composites under Flexural Loading [Volume 8, Issue 4, 2022, Pages 1324-1331]
  • Dongbang, Watcharin Sweep Blade Design for an Axial Wind Turbine using a Surrogate-‎assisted Differential Evolution Algorithm [Volume 9, Issue 1, 2023, Pages 217-225]
  • Dönmez, Ahmet Abdullah Size Effect on Inclined Cracking in Unidirectional Composites [Volume 7, Issue 4, 2021, Pages 2149-2158]
  • Dovbysh, Andriy The Dynamics of the Working Body of the Tubular Conveyor with ‎the Chain Drive [Volume 7, Issue 3, 2021, Pages 1710-1718]
  • Dragomir, S.S. Numerical Investigations of the Coupled Nonlinear Non-homogeneous Partial Differential Equations [Volume 8, Issue 3, 2022, Pages 1054-1064]
  • Dragunov, Valery P. Impact-enhanced Electrostatic Vibration Energy Harvester [Volume 8, Issue 2, 2022, Pages 671-683]
  • Dragunova, Evgeniya V. Impact-enhanced Electrostatic Vibration Energy Harvester [Volume 8, Issue 2, 2022, Pages 671-683]
  • Driss, Zied Thermal Behavior of Mesoporous Aramid Fiber Reinforced Silica Aerogel Composite for Thermal Insulation Applications: Microscale Modeling [Volume 10, Issue 1, 2024, Pages 140-151]
  • D’Annibale, Francesco Modeling beam-like planar structures by a one-dimensional continuum: an analytical-numerical method [Volume 7, Special Issue, 2021, Pages 1020-1033]
  • D’Annibale, Francesco Improving the linear stability of the visco-elastic Beck's beam via piezoelectric controllers [Volume 7, Special Issue, 2021, Pages 1098-1109]
  • Du, Jianke The Integrated Analysis of Vibrations of Quartz Crystal Plates ‎through Artificial Coupling Factors [Volume 7, Issue 1, 2021, Pages 69-77]
  • Duong, Xuan Bien On the Effect of the End-effector Point Trajectory on the Joint ‎Jerk of the Redundant Manipulators [Volume 7, Issue 3, 2021, Pages 1575-1582]
  • Duressa, Gemechis File Uniformly Convergent Numerical Method for Two-parametric ‎Singularly Perturbed Parabolic Convection-diffusion Problems [Volume 7, Issue 2, 2021, Pages 535-545]
  • Dutta, Jaideep Finite Integral Transform Based Solution of Second Grade Fluid Flow between Two Parallel Plates [Volume 5, Issue 5, 2019, Pages 989-997]
  • Duy, Le Quang Nonlinear Vibration of an Electrostatically Actuated ‎Functionally Graded Microbeam under Longitudinal Magnetic ‎Field [Volume 7, Issue 3, 2021, Pages 1537-1549]
  • Dyke, Shirley J. Variational Inference for Nonlinear Structural ‎Identification [Volume 7, Special Issue, 2021, Pages 1218-1231]

E

  • Ebrahimi, Mahmoud Twin Screw Expanders Profile Optimization Using Surrogate-‎Based Modelling [Volume 8, Issue 4, 2022, Pages 1141-1153]
  • Ebrahimzadeh Azghadi, Fahimeh Performance Investigation of Simple Low-dissipation AUSM ‎‎(SLAU) Scheme in Modeling of 2-D Inviscid Flow in Steam ‎Turbine Cascade Blades [Volume 9, Issue 2, 2023, Pages 332-345]
  • ECER, Safiye An Alternative Procedure for Longitudinal Vibration Analysis of ‎Bars with Arbitrary Boundary Conditions [Volume 9, Issue 1, 2023, Pages 294-301]
  • Edalatifar, Mohammad Buckling Analysis of Cantilever Nanoactuators Immersed in an Electrolyte: A Close Form Solution Using Duan-Rach Modified Adomian Decomposition Method [Volume 1, Issue 4, 2015, Pages 207-219]
  • Edalatifar, Mohammad A Deep Learning Approach to Predict the Flow Field and Thermal ‎Patterns of Nonencapsulated Phase Change Materials ‎Suspensions in an Enclosure‎ [Volume 8, Issue 4, 2022, Pages 1270-1278]
  • Eder, Martin A. Alternative Integration Approaches in the Weight Function ‎Method for Crack Problems [Volume 7, Issue 3, 2021, Pages 1719-1725]
  • Eegunjobi, Adetayo Irreversibility Analysis of MHD Buoyancy-Driven Variable Viscosity Liquid Film along an Inclined Heated Plate Convective Cooling [Volume 5, Issue 5, 2019, Pages 840-848]
  • Eegunjobi, Adetayo Samuel Entropy Analysis of a Radiating Magnetic Liquid Film along a Slippery Inclined Heated Surface with Convective Cooling [Volume 6, Special Issue, 2020, Pages 1141-1150]
  • Efendiyeva, Sadige P. Buckling Behavior of Nanocomposite Plates with Functionally ‎Graded Properties under Compressive Loads in Elastic and ‎Thermal Environments [Volume 9, Issue 4, 2023, Pages 974-986]
  • Eftekhari Yazdi, Mohammad MHD Flow and Heat Transfer of SiC-TiO2/DO Hybrid Nanofluid due to a Permeable Spinning Disk by a Novel Algorithm [Volume 5, Issue 5, 2019, Pages 976-988]
  • Eidi, Hamid Reza VOC level control by ventilation improvement of Flexography printing room using CFD modeling [Volume 3, Issue 3, 2017, Pages 171-177]
  • Eivazi Bagheri, Hadi Experimental Study on the Surface Modification by Electrical Discharge Process [Volume 5, Issue 2, 2019, Pages 249-257]
  • Elagamy, Khaled Efficacy of a Modulated Viscosity-dependent Temperature/nanoparticles Concentration Parameter on a ‎Nonlinear Radiative Electromagneto-nanofluid Flow along an Elongated Stretching Sheet [Volume 9, Issue 3, 2023, Pages 848-860]
  • El-Amin, Mohamed F. Multiscale Numerical Modeling of Solute Transport with Two-‎Phase Flow in a Porous Cavity [Volume 7, Issue 2, 2021, Pages 396-403]
  • El Amraoui, Rachid Numerical Investigation into the Effects of Orientation on ‎Subcooled Flow Boiling Characteristics [Volume 9, Issue 2, 2023, Pages 464-474]
  • El-Bahloul, Sara Ahmed Pre-drilling Effect on Thermal Friction Drilling of Cast Aluminum ‎Alloy Using Thermo-mechanical Finite Element Analysis [Volume 6, Special Issue, 2020, Pages 1371-1379]
  • El Bhilat, Hanan Numerical Analysis of the Effect of External Circumferential Elliptical Cracks in Transition Thickness Zone of Pressurized Pipes Using XFEM [Volume 5, Issue 5, 2019, Pages 861-874]
  • El Bouardi, Abdelmajid Convective Instability in Forchheimer-Prats Configuration with a Saturating Power-Law Fluid [Volume 10, Issue 2, 2024, Pages 357-368]
  • El-Danaf, T.A. Numerical Investigations of the Coupled Nonlinear Non-homogeneous Partial Differential Equations [Volume 8, Issue 3, 2022, Pages 1054-1064]
  • Eldesouky, Ibrahim Comparison of Functionally Graded Hip Stem Implants with ‎Various Second-Generation Titanium Alloys [Volume 7, Issue 3, 2021, Pages 1315-1323]
  • El-Dib, Yusry Stability Analysis of a Strongly Displacement Time-Delayed Duffing Oscillator Using Multiple Scales Homotopy Perturbation Method [Volume 4, Issue 4, 2018, Pages 260-274]
  • El-Dib, Yusry Osman The Rank Upgrading Technique for a Harmonic Restoring Force ‎of Nonlinear Oscillators [Volume 7, Issue 2, 2021, Pages 782-789]
  • El-Dib, Yusry O. Stability Analysis of a Damped Nonlinear Wave Equation [Volume 6, Special Issue, 2020, Pages 1394-1403]
  • Elfaisal Elrefaie, M. Thermal Performance Study of Plate-finned Vapor Chamber Heat Sink [Volume 10, Issue 2, 2024, Pages 304-316]
  • El Fakiri, Hanae Convective Instability in Forchheimer-Prats Configuration with a Saturating Power-Law Fluid [Volume 10, Issue 2, 2024, Pages 357-368]
  • Elgazery, Nasser S. Gold Nanoparticles’ Morphology Affects Blood Flow near a Wavy Biological Tissue Wall: An Application for Cancer Therapy [Volume 10, Issue 2, 2024, Pages 342-356]
  • Elgazery, Nasser S. A Periodic Solution of the Newell-Whitehead-Segel (NWS) Wave ‎Equation via Fractional Calculus [Volume 6, Special Issue, 2020, Pages 1293-1300]
  • Elgazery, Nasser S. Stability Analysis of a Damped Nonlinear Wave Equation [Volume 6, Special Issue, 2020, Pages 1394-1403]
  • Elgazery, Nasser S. Efficacy of a Modulated Viscosity-dependent Temperature/nanoparticles Concentration Parameter on a ‎Nonlinear Radiative Electromagneto-nanofluid Flow along an Elongated Stretching Sheet [Volume 9, Issue 3, 2023, Pages 848-860]
  • El Had, Khalid Numerical Analysis of the Effect of External Circumferential Elliptical Cracks in Transition Thickness Zone of Pressurized Pipes Using XFEM [Volume 5, Issue 5, 2019, Pages 861-874]
  • Elishakoff, Isaac Variational Derivation of Truncated Timoshenko-Ehrenfest Beam Theory [Volume 8, Issue 3, 2022, Pages 996-1004]
  • Elizalde, Hugo In-Plane Shear-Axial Strain Coupling Formulation for Shear-‎Deformable Composite Thin-Walled Beams [Volume 7, Issue 2, 2021, Pages 450-469]
  • El-kenani, H.N. Effect of the Gravity and Magnetic Field to Find Regular Precessions ‎of a Satellite-gyrostat with Principal Axes on a Circular Orbit [Volume 7, Issue 4, 2021, Pages 2120-2128]
  • EL Mghari, Hicham Numerical Investigation into the Effects of Orientation on ‎Subcooled Flow Boiling Characteristics [Volume 9, Issue 2, 2023, Pages 464-474]
  • El-midany, Tawfik Bending, Buckling and Vibration of a Functionally Graded Porous Beam Using Finite Elements [Volume 3, Issue 4, 2017, Pages 274-282]
  • El-Naggar, A. M. Periodic Solutions of the Duffing Harmonic Oscillator by He's Energy Balance Method [Volume 2, Issue 1, 2016, Pages 35-41]
  • Elnaqeeb, Thanaa Magnetohydrodynamic Free Convection Flows with Thermal Memory over a Moving Vertical Plate in Porous Medium [Volume 5, Issue 1, 2019, Pages 150-161]
  • Elsabaa, Fawzy M.F. Approximate Solutions of Coupled Nonlinear Oscillations: ‎Stability Analysis [Volume 7, Issue 2, 2021, Pages 382-395]
  • El-Sayed, Ahmed Mohammed Ahmed On the Dynamics of the Logistic Delay Differential Equation with ‎Two Different Delays [Volume 7, Issue 2, 2021, Pages 442-449]
  • El-Shafie, Ahmed Reliability Analysis of Nanocomposite Beams Reinforced with CNTs under Buckling Forces Using the Conjugate HL-RF [Volume 2, Issue 4, 2016, Pages 200-207]
  • Eltaher, Mohamed A. Vibration Analysis of Material Size-Dependent CNTs Using Energy Equivalent Model [Volume 4, Issue 2, 2018, Pages 75-86]
  • Eltaher, Mohamed A. Free Vibration Analysis of 2D Functionally Graded Strip Beam using Finite ‎Element Method‎ [Volume 8, Issue 4, 2022, Pages 1422-1430]
  • Eltaher, Mohamed A. Static Buckling of 2D FG Porous Plates Resting on Elastic ‎Foundation based on Unified Shear Theories‎ [Volume 9, Issue 1, 2023, Pages 239-258]
  • Emam, Sayyed Mohammad Evaluating the Delamination in the Drilling Process of a Melamine Coated Medium Density Fiberboard (MDF) [Volume 8, Issue 1, 2022, Pages 1-10]
  • Emamian, Amin An Exact Analytical Solution for Heat Conduction in a ‎Functionally Graded Conical Shell [Volume 9, Issue 2, 2023, Pages 302-317]
  • Emamzadeh, Mohamamd A Closed-Form Solution for Electro-Osmotic Flow in Nano-Channels [Volume 8, Issue 2, 2022, Pages 510-517]
  • Enab, Tawakol A. Comparison of Functionally Graded Hip Stem Implants with ‎Various Second-Generation Titanium Alloys [Volume 7, Issue 3, 2021, Pages 1315-1323]
  • Endalew, Mehari Fentahun Study of MHD Second Grade Flow through a Porous Microchannel under the Dual-Phase-Lag Heat and Mass Transfer Model [Volume 5, Issue 4, 2019, Pages 763-778]
  • Eremeev, Victor The Direct Impact Method for Studying Dynamic Behavior of ‎Viscoplastic Materials [Volume 8, Issue 2, 2022, Pages 597-604]
  • Eremeyev, Victor Dynamic Response of a Step Loaded Cubic Cavity Embedded in a ‎Partially Saturated Poroelastic Half-space by the Boundary ‎Element Method [Volume 8, Issue 1, 2022, Pages 331-339]
  • Eremeyev, Victor Experimental Study and Identification of a Dynamic ‎Deformation Model of Dry Clay at Strain Rates up to 2500 s-1‎ [Volume 8, Issue 3, 2022, Pages 981-995]
  • Eremeyev, Victor A. Investigation of Wood Properties at Elevated Temperature [Volume 8, Issue 1, 2022, Pages 298-305]
  • Eremeyev, Victor A. A Novel Approach to Fully Nonlinear Mathematical Modeling of ‎Tectonic Plates [Volume 9, Issue 2, 2023, Pages 430-444]
  • Eremin, Mikhail O. Influence of Up-down-up Constitutive Equation Parameters on ‎Yield Plateau Stage of Mild Steel Samples Subjected to Stretching [Volume 8, Issue 4, 2022, Pages 1315-1323]
  • Erkinjon son, Madaliev Murodil Numerical Calculation of an Air Centrifugal Separator Based on the SARC Turbulence Model [Volume 6, Special Issue, 2020, Pages 1133-1140]
  • Erre, Damien Finite Element and Experimental Investigation on the Effect of ‎Repetitive Shock in Corrugated Cardboard Packaging [Volume 7, Issue 2, 2021, Pages 820-830]
  • Ershkov, Sergey Rotations of a Rigid Body Close to the Lagrange Case under the ‎Action of Nonstationary Perturbation Torque [Volume 8, Issue 3, 2022, Pages 1023-1031]
  • Ershkov, Sergey Exact Solutions for Isobaric Inhomogeneous Couette Flows of a ‎Vertically Swirling Fluid [Volume 9, Issue 2, 2023, Pages 521-528]
  • Ershkov, Sergey Inhomogeneous Gradient Poiseuille Flows of a Vertically Swirled Fluid [Volume 10, Issue 1, 2024, Pages 1-12]
  • Ersoy, Hakan Free Vibration of Annular Plates by Discrete Singular Convolution and Differential Quadrature Methods [Volume 2, Issue 3, 2016, Pages 128-133]
  • Esakki, Balasubramanian Computational Fluid Dynamic Analysis of Amphibious Unmanned Aerial Vehicle [Volume 8, Issue 2, 2022, Pages 475-484]
  • Esfahanian, Mohsen Optimal Roll Center Height of Front McPherson Suspension System for a Conceptual Class A Vehicle [Volume 1, Issue 1, 2015, Pages 10-16]
  • Eskandari Jam, Jafar Buckling and Free Vibration Analysis of Fiber Metal-laminated Plates Resting on Partial Elastic Foundation [Volume 6, Issue 1, 2020, Pages 37-51]
  • Eskandari Jam, Jafar Experimental and Numerical Buckling Analysis of Carbon Fiber Composite Lattice Conical Structure before and after Lateral Impact [Volume 6, Issue 4, 2020, Pages 813-822]
  • Esmaeili, Milad Vibration and Buckling Analysis of Functionally Graded Flexoelectric Smart Beam [Volume 5, Issue 5, 2019, Pages 900-917]
  • Esmail, Essam L. Automatic Structural Synthesis of Planetary Geared Mechanisms ‎using Graph Theory [Volume 9, Issue 2, 2023, Pages 384-403]
  • Esmail, Essam L. The Structural Synthesis of Non-fractionated, Three-degree-of-freedom Planetary Gear Mechanisms [Volume 10, Issue 1, 2024, Pages 205-223]
  • Esqueda, Humberto Discretization of the 2D Convection–Diffusion Equation Using ‎Discrete Exterior Calculus [Volume 6, Special Issue, 2020, Pages 1348-1363]
  • Estumano, Diego C. Parameter Estimation in Population Balance through Bayesian ‎Technique Markov Chain Monte Carlo [Volume 7, Issue 2, 2021, Pages 890-901]
  • Evans, Sam On the Use of Acoustic Emission and Digital Image Correlation for Welded Joints Damage Characterization [Volume 5, Issue 2, 2019, Pages 381-389]
  • Evdokimova, O.V. About Earthquakes in Subduction Zones with the Potential to ‎Cause a Tsunami [Volume 7, Special Issue, 2021, Pages 1232-1241]
  • Ezzin, Hamdi Lamb Wave Analysis in Anisotropic Multilayer ‎Piezoelectric-piezomagnetic Material [Volume 8, Issue 2, 2022, Pages 629-640]

F

  • Fabbrocino, Francesco Axial and Torsional Free Vibrations of Elastic Nano-Beams by Stress-Driven Two-Phase Elasticity [Volume 5, Issue 2, 2019, Pages 402-413]
  • Faghani, Gholam Investigation on the Ultrasonic Tube Hydroforming in the Bulging Process Using Finite Element Method [Volume 3, Issue 4, 2017, Pages 251-257]
  • Faghani, Gholamreza Buckling and Vibration Analysis of Tapered Circular Nano Plate [Volume 4, Issue 1, 2018, Pages 40-54]
  • Faghidian, S. Ali Axial and Torsional Free Vibrations of Elastic Nano-Beams by Stress-Driven Two-Phase Elasticity [Volume 5, Issue 2, 2019, Pages 402-413]
  • FAKINLEDE, Omotayo. A Deformation Characteristics of Composite Structures [Volume 2, Issue 3, 2016, Pages 174-191]
  • Fakouriyan, Samaneh Economic Evaluation of Supplying Commercial Thermal Load by ‎a New CPVT System: A Case Study in Iran [Volume 9, Issue 2, 2023, Pages 371-383]
  • Fallah, Behnam MHD Flow and Heat Transfer of SiC-TiO2/DO Hybrid Nanofluid due to a Permeable Spinning Disk by a Novel Algorithm [Volume 5, Issue 5, 2019, Pages 976-988]
  • Fani saberi, Farhad Design of an Adaptive-Neural Network Attitude Controller of a Satellite using Reaction Wheels [Volume 1, Issue 2, 2015, Pages 67-73]
  • Fantuzzi, Nicholas Buckling Behavior of Nanocomposite Plates with Functionally ‎Graded Properties under Compressive Loads in Elastic and ‎Thermal Environments [Volume 9, Issue 4, 2023, Pages 974-986]
  • Farahani, Mohammadreza Experimental Study of the Residual Stresses in Girth Weld of Natural Gas Transmission Pipeline [Volume 5, Issue 2, 2019, Pages 199-206]
  • Farahani, Mohammadreza Correlation between the Weld Residual Stresses and its Tensile and Impact Strength [Volume 5, Issue 4, 2019, Pages 727-734]
  • Faraji, Hamza Scaling Law of Permeability and Porosity for Fluid Transport ‎Phenomena in Porous PCM Media [Volume 7, Issue 1, 2021, Pages 84-92]
  • Faraji, Nima Optimizing Multidirectional Torsional Hysteretic Damper Specifications using Harmony Search [Volume 10, Issue 1, 2024, Pages 80-91]
  • Faraz, Naeem Analytical Solution of Linear, Quadratic and Cubic Model of PTT Fluid [Volume 1, Issue 4, 2015, Pages 220-228]
  • Farazin, Ashkan Nanostructure, Molecular Dynamics Simulation and Mechanical Performance of PCL Membranes Reinforced with Antibacterial Nanoparticles [Volume 7, Issue 4, 2021, Pages 1907-1915]
  • Farbod, Mansoor A New Modified Hamilton-Crosser and Nan Models for Thermal ‎Conductivity of Different Lengths Carbon Nanotubes Water-‎based Nanofluids [Volume 8, Issue 3, 2022, Pages 831-837]
  • Farhadi Nia, Mahmood Theoretical and Experimental Investigation on Mechanical Behavior of Aluminum to Aluminum Tubular Bonded Lap Joint under Pure Torsion and a Finite Element Comparison with Hybrid Rivet/Bonded Joint [Volume 8, Issue 2, 2022, Pages 485-492]
  • Farhangdoost, Khalil On the Influence of Riveting Process Parameters on Fatigue Life of Riveted Lap Joint [Volume 6, Issue 2, 2020, Pages 248-258]
  • Farid, Mehrdad Failure Procedure in Adhesive Composite Joints under Different Types of Loading [Volume 5, Issue 4, 2019, Pages 647-651]
  • Farjam, Nazanin Pull-in behavior of a bio-mass sensor based on an electrostatically actuated cantilevered CNT with consideration of rippling effect [Volume 1, Issue 4, 2015, Pages 229-239]
  • Farman, Muhammad Close Loop Design in Glucose Insulin Model with Effect of ‎Physical Exercise [Volume 7, Issue 2, 2021, Pages 478-485]
  • Farooq, Muhammad Comparative Study of Plane Poiseuille Flow of Non-isothermal ‎Couple ‎Stress Fluid of Reynold Viscosity Model using Optimal ‎Homotopy ‎Asymptotic Method and New Iterative Method [Volume 7, Issue 2, 2021, Pages 404-414]
  • Farsirotou, Evangelia D. Explicit and Implicit Finite -Volume Methods for Depth Averaged Free-Surface Flows [Volume 6, Special Issue, 2020, Pages 1270-1282]
  • Farzin, Mahmood Investigating the Ultrasonic Assistance in the Tube Hydroforming Process [Volume 3, Issue 3, 2017, Pages 178-184]
  • Farzin, Mahmood Investigation on the Ultrasonic Tube Hydroforming in the Bulging Process Using Finite Element Method [Volume 3, Issue 4, 2017, Pages 251-257]
  • Farzin, Mahmoud Design, Analysis and Manufacturing of a Bone Cutting Ultrasonic Horn-Tool and Verification with Experimental Tests [Volume 8, Issue 2, 2022, Pages 438-447]
  • Fatouraee, Naser Characterization of the Nonlinear Biaxial Mechanical Behavior ‎of Human Ureter using Constitutive Modeling and Artificial ‎Neural Networks [Volume 8, Issue 4, 2022, Pages 1186-1195]
  • Fauzi, Umar Two-Solid Deposition in Fluid Column using Immersed ‎Boundary-Lattice Boltzmann Method [Volume 7, Issue 3, 2021, Pages 1814-1825]
  • Fazel, Dara Failure Procedure in Adhesive Composite Joints under Different Types of Loading [Volume 5, Issue 4, 2019, Pages 647-651]
  • Fazlyab, Alireza Design of an Adaptive-Neural Network Attitude Controller of a Satellite using Reaction Wheels [Volume 1, Issue 2, 2015, Pages 67-73]
  • Fedorenko, Roman M. ‎2D Planar Simulation of Collisions between Liquid Droplets and ‎Solid Particles in a Gas [Volume 9, Issue 3, 2023, Pages 678-694]
  • Feng, Chun Simulation of Hydraulic Fracture Propagation in Fractured Coal ‎Seams with Continuum-discontinuum Elements [Volume 7, Issue 4, 2021, Pages 2185-2195]
  • Ferdows, M. A Note on the Hydromagnetic Blasius Flow with Variable Thermal Conductivity [Volume 7, Issue 4, 2021, Pages 1925-1930]
  • Fernando, Nuwantha Design of Doubly Salient Permanent Magnet Generator for ‎Output Power Enhancement using Structural Modification [Volume 7, Issue 4, 2021, Pages 2171-2178]
  • Ferrer-Fuenmayor, Samuel Shape Optimization of Slotted Steel Plate Dampers using the ‎Simulated Annealing Algorithm [Volume 9, Issue 3, 2023, Pages 870-883]
  • Ferretti, Manuel Modeling beam-like planar structures by a one-dimensional continuum: an analytical-numerical method [Volume 7, Special Issue, 2021, Pages 1020-1033]
  • Ferroudj, Nawal Mixed Convection Heat Transfer and Entropy Generation in a ‎Water-filled Square Cavity Partially Heated from Below: The ‎Effects of Richardson and Prandtl Numbers [Volume 8, Issue 1, 2022, Pages 282-297]
  • Ferroudji, Fateh Structural Strength Analysis and Fabrication of a Straight Blade of an H-Darrieus Wind Turbine [Volume 7, Issue 3, 2021, Pages 1276-1282]
  • Filimonov, S.A. Verification and Validation of a Network Algorithm for Single-phase Flow Modeling using Microfluidic Experiments [Volume 9, Issue 4, 2023, Pages 1156-1167]
  • Firoozzadeh, Mohammad Thermodynamic and Environmental Assessment of Mounting Fin ‎at the Back Surface of Photovoltaic Panels [Volume 7, Issue 4, 2021, Pages 1956-1963]
  • Fischer, Szabolcs Modeling of the Dynamic Rail Deflection using Elastic Wave Propagation [Volume 8, Issue 1, 2022, Pages 379-387]
  • Fischer, Szabolcs Numerical Optimization of Battery Heat Management of Electric Vehicles [Volume 9, Issue 4, 2023, Pages 1076-1092]
  • Flores-Jimenez, Mariana S. Generation of a Quadrilateral Mesh based on NURBS for Gyroids ‎of Variable Thickness and Porosity [Volume 8, Issue 2, 2022, Pages 684-698]
  • Fomichev, Vasily A Case Study of Combined Application of Smart Materials in a ‎Thermal Energy Harvester with Vibrating Action [Volume 7, Issue 1, 2021, Pages 372-381]
  • Fomin, Vasily Performance of Two Types of High Speed, High Efficiency ‎Axisymmetric Intakes [Volume 7, Issue 1, 2021, Pages 93-101]
  • Foorginejad, Abolfazl Modeling of Weld Bead Geometry Using Adaptive Neuro-Fuzzy Inference System (ANFIS) in Additive Manufacturing [Volume 6, Issue 1, 2020, Pages 160-170]
  • Foorginejad, Abolfazl Designing and Creating a Mouse Using Nature-Inspired Shapes [Volume 6, Issue 4, 2020, Pages 841-847]
  • Formato, Andrea Sizing the Actuators for a Dragon Fly Prototype [Volume 10, Issue 1, 2024, Pages 152-163]
  • Fouda, Noha Bending, Buckling and Vibration of a Functionally Graded Porous Beam Using Finite Elements [Volume 3, Issue 4, 2017, Pages 274-282]
  • Fouda, Noha Comparison of Functionally Graded Hip Stem Implants with ‎Various Second-Generation Titanium Alloys [Volume 7, Issue 3, 2021, Pages 1315-1323]
  • Fourar, Ali Numerical Investigation of an Unsteady and Anisotropic Turbulent ‎Flow Downstream a 90° Bend Pipe with and without Ribs [Volume 7, Issue 3, 2021, Pages 1620-1638]
  • Fournier, Stéphane Parametric Optimization of a Cyclogiro Aircraft Design for Efficient Hover with Aeroelastic Considerations [Volume 7, Issue 3, 2021, Pages 1774-1787]
  • Fragassa, Cristiano Multiobjective Geometric Analysis of Stiffened Plates under ‎Bending through Constructal Design Method [Volume 6, Special Issue, 2020, Pages 1438-1449]
  • Fragassa, Cristiano Thermal Behavior of Monocrystalline Silicon Solar Cells: A ‎Numerical and Experimental Investigation on the Module ‎Encapsulation Materials [Volume 7, Issue 3, 2021, Pages 1847-1855]
  • Freitas, Mario A Comparative Analysis of TLCD-Equipped Shear Buildings under Dynamic Loads [Volume 5, Issue 1, 2019, Pages 40-45]
  • Fuentes-Aguilar, Rita Q. Generation of a Quadrilateral Mesh based on NURBS for Gyroids ‎of Variable Thickness and Porosity [Volume 8, Issue 2, 2022, Pages 684-698]
  • Fung, Chin-Ping Dynamic Response of Functionally Graded Carbon ‎Nanotube-Reinforced Hybrid Composite Plates [Volume 8, Issue 1, 2022, Pages 182-195]
  • Fursov, Andrei A Case Study of Combined Application of Smart Materials in a ‎Thermal Energy Harvester with Vibrating Action [Volume 7, Issue 1, 2021, Pages 372-381]

G

  • Gagnon, Louis Parametric Optimization of a Cyclogiro Aircraft Design for Efficient Hover with Aeroelastic Considerations [Volume 7, Issue 3, 2021, Pages 1774-1787]
  • Gajbhiye, Param D. Bending Analysis of Thick Isotropic Plates by Using 5th Order Shear Deformation Theory [Volume 2, Issue 2, 2016, Pages 80-95]
  • Galkin, Vladislav Performance of Two Types of High Speed, High Efficiency ‎Axisymmetric Intakes [Volume 7, Issue 1, 2021, Pages 93-101]
  • Ganga, B. Slip Effects on Ohmic Dissipative Non-Newtonian Fluid Flow in the Presence of Aligned Magnetic Field [Volume 6, Issue 2, 2020, Pages 296-306]
  • Ganga, B. Three Dimensional Non-linear Radiative Nanofluid Flow over a Riga Plate [Volume 6, Issue 4, 2020, Pages 1012-1029]
  • Ganga, B. Heat Transfer of Hybrid-nanofluids Flow Past a Permeable Flat Surface with Different Volume Fractions [Volume 8, Issue 1, 2022, Pages 21-35]
  • Ganji, Davood Domiri Determination of Periodic Solution for Tapered Beams with Modified Iteration Perturbation Method [Volume 1, Issue 1, 2015, Pages 44-51]
  • Ganji, Davood Domiri Viscous Dissipation Impact on Free Convection Flow of Cu-water Nanofluid in a Circular Enclosure with Porosity Considering Internal Heat Source [Volume 5, Issue 4, 2019, Pages 717-726]
  • Gao, Hui Simulation of Hydraulic Fracture Propagation in Fractured Coal ‎Seams with Continuum-discontinuum Elements [Volume 7, Issue 4, 2021, Pages 2185-2195]
  • Gao, Wan-Yang Numerical Analysis on the Bond Performance of Different ‎Anchored Joints under Monotonic and Cyclic Pull-push Loading [Volume 8, Issue 1, 2022, Pages 388-404]
  • Gao, Yonggang A Simplified Analytical Method for Detuning Periodic Pile Barriers [Volume 8, Issue 4, 2022, Pages 1480-1487]
  • Gard, Bahman Using the Matrix Method to Compute the Degrees of Freedom of Mechanisms [Volume 3, Issue 3, 2017, Pages 158-170]
  • Garg, Ruchika Performance Analysis of Segmentation of Hyperspectral Images Based on Color Image Segmentation [Volume 3, Issue 2, 2017, Pages 144-149]
  • Garziera, Rinaldo Wave Motion and Stop-Bands in Pipes with Helical Characteristics Using Wave Finite Element Analysis [Volume 4, Special Issue: Applied and Computational Issues in Structural Engineering, 2018, Pages 420-428]
  • Gaur, Himanshu A New Stress Based Approach for Nonlinear Finite Element Analysis [Volume 5, Special Issue: Computational Methods for Material Failure, 2019, Pages 563-576]
  • Gayatri, Mocherla Nonlinear Convective Flow of Maxwell Fluid over a Slendering Stretching Sheet with Heat Source/Sink [Volume 8, Issue 1, 2022, Pages 60-70]
  • Ghaderi, Abbasali Reliability Analysis of Nanocomposite Beams Reinforced with CNTs under Buckling Forces Using the Conjugate HL-RF [Volume 2, Issue 4, 2016, Pages 200-207]
  • Ghadjari, Hossein Effect of Variable Thermal Expansion Coefficient and Nanofluid Properties on Steady Natural Convection in an Enclosure [Volume 3, Issue 4, 2017, Pages 240-250]
  • Ghadle, Kirtiwant P. Some New Existence, Uniqueness and Convergence Results for Fractional Volterra-Fredholm Integro-Differential Equations [Volume 5, Issue 1, 2019, Pages 58-69]
  • Ghaemi Osgouie, Kambiz Using the Matrix Method to Compute the Degrees of Freedom of Mechanisms [Volume 3, Issue 3, 2017, Pages 158-170]
  • Ghaffari, Reihaneh Effect of Variable Thermal Expansion Coefficient and Nanofluid Properties on Steady Natural Convection in an Enclosure [Volume 3, Issue 4, 2017, Pages 240-250]
  • Ghahremani, Esmaeil Effect of Variable Thermal Expansion Coefficient and Nanofluid Properties on Steady Natural Convection in an Enclosure [Volume 3, Issue 4, 2017, Pages 240-250]
  • Ghahremani, Esmaeil Transient Natural Convection in an Enclosure with Variable Thermal Expansion Coefficient and Nanofluid Properties [Volume 4, Issue 3, 2018, Pages 133-139]
  • Ghahremani, Saeed Evaluating the Delamination in the Drilling Process of a Melamine Coated Medium Density Fiberboard (MDF) [Volume 8, Issue 1, 2022, Pages 1-10]
  • Ghalambaz, Mehdi Buckling Analysis of Cantilever Nanoactuators Immersed in an Electrolyte: A Close Form Solution Using Duan-Rach Modified Adomian Decomposition Method [Volume 1, Issue 4, 2015, Pages 207-219]
  • Ghalambaz, Mohammad Buckling Analysis of Cantilever Nanoactuators Immersed in an Electrolyte: A Close Form Solution Using Duan-Rach Modified Adomian Decomposition Method [Volume 1, Issue 4, 2015, Pages 207-219]
  • Ghalami, Mehran Buckling and Vibration Analysis of Tapered Circular Nano Plate [Volume 4, Issue 1, 2018, Pages 40-54]
  • Ghanbarzadeh, Afshin Bearing Fault Detection Based on Maximum Likelihood Estimation and Optimized ANN Using the Bees Algorithm [Volume 1, Issue 1, 2015, Pages 35-43]
  • Ghannadpour, Seyyed Amir Mahdi Ritz Method Application to Bending, Buckling and Vibration Analyses of Timoshenko Beams via Nonlocal Elasticity [Volume 4, Issue 1, 2018, Pages 16-26]
  • Gharagozloo, Mohammad Hossein Chaos Control in Gear Transmission System using GPC and SMC ‎Controllers [Volume 8, Issue 2, 2022, Pages 545-556]
  • Gharechahi, Raziyeh High Order Compact Finite Difference Schemes for Solving Bratu-Type Equations [Volume 5, Issue 1, 2019, Pages 91-102]
  • Gharib, Ahmad Thermal-Hydraulics analysis of pressurized water reactor core by using single heated channel model [Volume 3, Issue 3, 2017, Pages 192-198]
  • Ghobadi, Moslem Electrochemical and Mechanical Properties of Ni/g-C3N4 ‎Nanocomposite Coatings with Enhanced Corrosion Protective ‎Properties: A Case Study for Modeling the Corrosion Resistance ‎by ANN and ANFIS Models [Volume 9, Issue 3, 2023, Pages 590-606]
  • Gholami Motlagh, Vahid Optimization of Air Distribution Patterns by Arrangements of ‎Air Inlets and Outlets: Case Study of an Operating Room [Volume 8, Issue 3, 2022, Pages 809-830]
  • Ghommem, Mehdi Smart Gas Sensors: Materials, Technologies, Practical ‎Applications, and Use of Machine Learning – A Review [Volume 9, Issue 3, 2023, Pages 775-803]
  • Ghugal, Yuwaraj M. Bending Analysis of Thick Isotropic Plates by Using 5th Order Shear Deformation Theory [Volume 2, Issue 2, 2016, Pages 80-95]
  • Ghugal, Yuwaraj M. Bending of Shear Deformable Plates Resting on Winkler Foundations According to Trigonometric Plate Theory [Volume 4, Issue 3, 2018, Pages 187-201]
  • Ghumare, Shantaram A New Quasi-3D Model for Functionally Graded Plates [Volume 5, Issue 2, 2019, Pages 367-380]
  • Gilani, Syed I.U. Assessment of the Turbine Location for Optimum Performance of the Solar Vortex Engine as a Replacement to the Tall Chimney Solar Updraft Power Plant Design [Volume 10, Issue 1, 2024, Pages 38-54]
  • Gireesha, B. J. Entropy Analysis of Darcy-Forchheimer Model of Prandtl Nanofluid over a Curved Stretching Sheet and Heat Transfer Optimization by ANOVA-Taguchi Technique [Volume 10, Issue 2, 2024, Pages 287-303]
  • Gireesha, B.J. Theoretical Study of Convective Heat Transfer in Ternary ‎Nanofluid Flowing past a Stretching Sheet [Volume 8, Issue 4, 2022, Pages 1279-1286]
  • Gómez-Aguilar, J.F. Numerical Solution of the Time Fractional Reaction-advection-diffusion Equation in Porous Media [Volume 8, Issue 1, 2022, Pages 84-96]
  • Gómez-Aguilar, J.F. Application of Atangana-Baleanu Fractional Derivative to ‎Carbon Nanotubes Based Non-Newtonian Nanofluid: ‎Applications in Nanotechnology [Volume 6, Special Issue, 2020, Pages 1260-1269]
  • Gómez-Aguilar, José Francisco Numerical Solution of Caputo-Fabrizio Time Fractional Distributed Order Reaction-diffusion Equation via Quasi Wavelet based Numerical Method [Volume 6, Issue 4, 2020, Pages 848-861]
  • Gómez-Aguilar, José Francisco Laplace Variational Iteration Method for Modified Fractional Derivatives with Non-singular Kernel [Volume 6, Issue 3, 2020, Pages 684-698]
  • Godoy, Luis A. Quasi-bifurcation and Imperfection-sensitivity of Cylindrical ‎Shells under Pressures due to an Explosion [Volume 7, Issue 2, 2021, Pages 984-992]
  • Gokul Raj, P. Computational Fluid Dynamic Analysis of Amphibious Unmanned Aerial Vehicle [Volume 8, Issue 2, 2022, Pages 475-484]
  • Golabi, Sa’id Optimum Design of Liquified Natural Gas Bi-lobe Tanks using Finite Element, Genetic Algorithm and Neural Network [Volume 6, Issue 4, 2020, Pages 862-877]
  • Golbahar Haghighi, Mohammad Reza Investigating the Effects of Air Duct Dimensions on Aeration and Hydrodynamic Characteristics of a Surface-piercing Propeller [Volume 10, Issue 2, 2024, Pages 392-405]
  • Golmakani, M.E. Thermal Buckling Analysis of Circular Bilayer Graphene Sheets Resting on an Elastic Matrix Based on Nonlocal Continuum Mechanics [Volume 7, Issue 4, 2021, Pages 1862-1877]
  • Golmohamadi, A.M. Mesoscopic Simulation of Forced Convective Heat Transfer of Carreau-Yasuda Fluid Flow over an Inclined Square: Temperature-dependent Viscosity [Volume 6, Issue 2, 2020, Pages 307-319]
  • Gomes, Herbert Martins Proportional Topology Optimization under ‎Reliability-based Constraints [Volume 8, Issue 1, 2022, Pages 319-330]
  • Gomes, Herbert Martins A Novel BESO Methodology for Topology Optimization of ‎Reinforced Concrete Structures: A Two-loop Approach [Volume 9, Issue 2, 2023, Pages 498-512]
  • Gomes, Mateus das Neves WaveMIMO Methodology: Numerical Wave Generation of a ‎Realistic Sea State‎ [Volume 7, Issue 4, 2021, Pages 2129-2148]
  • Gonçalves, Aparecido Carlos Prognosis and Detection of Experimental Failures in Open Field Diesel ‎Engines Applying Wiener's Artificial Immunological Systems [Volume 7, Issue 1, 2021, Pages 1-12]
  • Gonçalves, Aparecido Carlos Analysis and Recognition of Standards in Intelligent Hybrid ‎Systems using Natural Computing [Volume 7, Issue 3, 2021, Pages 1764-1773]
  • Gong, Xianglin An Analysis of Nonlinear Beam Vibrations with the Extended ‎Rayleigh-Ritz Method [Volume 8, Issue 4, 2022, Pages 1299-1306]
  • Goodarzimehr, Vahid A Hybrid Particle Swarm Optimization and Genetic Algorithm for Truss Structures with Discrete Variables [Volume 6, Issue 3, 2020, Pages 593-604]
  • Goqo, S.P. Magnetohydrodynamic Bio-convective Casson Nanofluid Flow: A Numerical Simulation by Paired Quasilinearisation [Volume 7, Issue 4, 2021, Pages 2024-2039]
  • Gorji, Hamid Experimental Study on the Surface Modification by Electrical Discharge Process [Volume 5, Issue 2, 2019, Pages 249-257]
  • Gorobets, Valery Numerical Modeling of Heat Transfer and Hydrodynamics in Compact Shifted Arrangement Small Diameter Tube Bundles [Volume 7, Issue 1, 2021, Pages 292-301]
  • Gorobets, Valery Experimental and Numerical Investigation of Heat and Mass ‎Transfer Processes for Determining the Optimal Design of an ‎Accumulator with Phase Transformations [Volume 7, Issue 2, 2021, Pages 611-620]
  • Govardhan, K. MHD Casson Nanofluid Past a Stretching Sheet with the Effects of Viscous Dissipation, Chemical Reaction and Heat Source/Sink [Volume 7, Issue 4, 2021, Pages 2040-2048]
  • Govind Neelan, Arun Higher-Order Slope Limiters for Euler Equation [Volume 8, Issue 3, 2022, Pages 904-917]
  • Grigoryev, Mikhail Dynamic Response of a Step Loaded Cubic Cavity Embedded in a ‎Partially Saturated Poroelastic Half-space by the Boundary ‎Element Method [Volume 8, Issue 1, 2022, Pages 331-339]
  • Groşan, Teodor Comments on the paper “Nonlinear Convective Flow of Maxwell ‎Fluid over a Slendering Stretching Sheet with Heat Source/Sink, ‎Mocherla Gayatri, Konda Jayaramireddy, Macherla Jayachandra ‎Babu, J. Appl. Comput. Mech., 8(1), 2022, 60-70”‎ [Volume 8, Issue 3, 2022, Pages 1032-1034]
  • Guida, Domenico A General Multibody Approach for the Linear and Nonlinear Stability Analysis of Bicycle Systems. Part I: Methods of Constrained Dynamics [Volume 7, Issue 2, 2021, Pages 655-670]
  • Guida, Domenico A General Multibody Approach for the Linear and Nonlinear Stability Analysis of Bicycle Systems. Part II: Application to the Whipple-Carvallo Bicycle Model [Volume 7, Issue 2, 2021, Pages 671-700]
  • Guida, Domenico On the Analytical and Computational Methodologies for Modelling Two-wheeled Vehicles within the Multibody Dynamics Framework: A Systematic Literature Review [Volume 8, Issue 1, 2022, Pages 153-181]
  • Guida, Domenico Multibody Modeling and Nonlinear Control of a Pantograph Scissor Lift Mechanism [Volume 9, Issue 1, 2023, Pages 129-167]
  • Guida, Domenico A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part I: Analytical Methods and Computational Algorithms [Volume 9, Issue 2, 2023, Pages 529-549]
  • Guida, Domenico A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part II: Numerical Analysis and Experimental Testing [Volume 9, Issue 2, 2023, Pages 550-589]
  • Gunasekar, Aishwarya Frequency Separation in Architected Structures using Inverse Methods [Volume 7, Issue 4, 2021, Pages 2084-2095]
  • Guo, Bin Design of Cooling Water System (CWS) for CRAFT Lower Hybrid ‎Current Driven (LHCD) System‎ [Volume 7, Issue 2, 2021, Pages 470-477]
  • Guo, Ya-Nan Different Groups of Variational Principles for Whitham-Broer-‎Kaup Equations in Shallow Water [Volume 6, Special Issue, 2020, Pages 1178-1183]
  • Guo, Ya-Nan Variational Principles for Two Compound Nonlinear Equations ‎with Variable Coefficients [Volume 7, Issue 2, 2021, Pages 415-421]
  • Guo, Ya-Nan New Variational Principles for Two Kinds of Nonlinear Partial Differential Equation in Shallow Water [Volume 10, Issue 2, 2024, Pages 406-412]
  • Gupta, Bivek A New Class of Linear Canonical Wavelet Transform [Volume 10, Issue 1, 2024, Pages 64-79]
  • Gupta, Shishir Modelling of Love Waves in Fluid Saturated Porous Viscoelastic Medium resting over an Exponentially Graded Inhomogeneous Half-space Influenced by Gravity [Volume 6, Issue 3, 2020, Pages 517-530]
  • Gupta, Vipin Thermoelastic Modeling with Dual Porosity Interacting with an Inviscid Liquid [Volume 10, Issue 1, 2024, Pages 111-124]
  • Gupta, Yogesh Multiple Solutions for Slip Effects on Dissipative Magneto-Nanofluid Transport Phenomena in Porous Media: Stability Analysis [Volume 6, Issue 4, 2020, Pages 956-967]
  • Gupta, Yogesh Numerical Scheme based on Non-polynomial Spline Functions for ‎the System of Second Order Boundary Value Problems arising in ‎Various Engineering Applications [Volume 8, Issue 1, 2022, Pages 144-152]
  • Gurbanov, Nurlan Theory and Experiment in Predicting the Strength of Hybrid ‎Fiber Metal Laminates [Volume 9, Issue 4, 2023, Pages 987-999]
  • Guruprasad, P.J. Simple Two Variable Refined Theory for Shear Deformable Isotropic Rectangular Beams [Volume 6, Issue 3, 2020, Pages 394-415]
  • Gutierrez, Albio D. A Reduced-Order Simulation Methodology for Nanosecond-Pulsed Plasmas in a Backward-Facing ‎Step Supersonic Combustor Configuration [Volume 9, Issue 1, 2023, Pages 181-194]
  • Günerhan, H. Rotating Cylinder Turbulator Effect on the Heat Transfer of a ‎Nanofluid Flow in a Wavy Divergent Channel‎ [Volume 7, Issue 4, 2021, Pages 1987-1998]
  • Guzei, Dmitriy V. Flow Regimes Characteristics of Water-crude Oil in a Rectangular ‎Y-microchannel [Volume 8, Issue 2, 2022, Pages 655-670]
  • Guzei, D.V. Numerical Investigation of Enhanced Oil Recovery from various ‎Rocks by Nanosuspensions Flooding [Volume 8, Issue 1, 2022, Pages 306-318]
  • Guzei, D.V. Verification and Validation of a Network Algorithm for Single-phase Flow Modeling using Microfluidic Experiments [Volume 9, Issue 4, 2023, Pages 1156-1167]

H

  • Habibirad, Ali A meshless method based on moving Kriging interpolation for the numerical solution of the transient flow of magnetohydrodynamic fractional Maxwell fluid equation [(Articles in Press)]
  • Hachim, Abdelilah Numerical Analysis of the Effect of External Circumferential Elliptical Cracks in Transition Thickness Zone of Pressurized Pipes Using XFEM [Volume 5, Issue 5, 2019, Pages 861-874]
  • Hadad, Kamal VOC level control by ventilation improvement of Flexography printing room using CFD modeling [Volume 3, Issue 3, 2017, Pages 171-177]
  • Hader, Ahmed Scaling Law of Permeability and Porosity for Fluid Transport ‎Phenomena in Porous PCM Media [Volume 7, Issue 1, 2021, Pages 84-92]
  • Hadj Djelloul, Nasser Dine Numerical Study of the Dynamic Response of Elevated Steel ‎Conical Tank under Vertical Seismic Excitation - Case Study [Volume 9, Issue 2, 2023, Pages 445-457]
  • Hadji, Lazreg Free Vibration Analysis of FG Porous Sandwich Plates under ‎Various Boundary Conditions [Volume 7, Issue 2, 2021, Pages 505-519]
  • Hadji, Lazreg Investigation of the Static Bending Response of FGM Sandwich Plates [Volume 10, Issue 1, 2024, Pages 26-37]
  • Haghpanah, Seyyed Arash Musculoskeletal Modeling and Control of the Human Upper Limb during Manual Wheelchair Propulsion: Application in Functional Electrical Stimulation Rehabilitation Therapy [Volume 10, Issue 1, 2024, Pages 92-110]
  • Hai, N.Q. Free Vibration Analysis of Quintic Nonlinear Beams using Equivalent Linearization Method with a Weighted Averaging [Volume 5, Issue 1, 2019, Pages 46-57]
  • Hajipour, Alireza A Review of Recent Studies on Simulations for Flow around High-Speed Trains [Volume 5, Issue 2, 2019, Pages 311-333]
  • Hajiyeva, Nazile Algorithm for Determining the Permeability and Compaction ‎Properties of a Gas Condensate Reservoir based on a Binary Model [Volume 8, Issue 3, 2022, Pages 1014-1022]
  • Hajizadeh, Ahmad Transient Electro-osmotic Slip Flow of an Oldroyd-B Fluid with Time-fractional Caputo-Fabrizio Derivative [Volume 5, Issue 4, 2019, Pages 779-790]
  • Hajj, Muhammad R. VIV Control Strategies Using Displacement-Based ‎Phenomenological Model [Volume 7, Special Issue, 2021, Pages 1090-1097]
  • Hajmohammad, Mohammad Hadi Dynamic Buckling of Embedded Laminated Nanocomposite Plates Based on Sinusoidal Shear Deformation Theory [Volume 2, Issue 4, 2016, Pages 254-261]
  • Hakeem, A K Abdul Effect of Exponentially Variable Viscosity and Permeability on Blasius Flow of Carreau Nano Fluid over an Electromagnetic Plate through a Porous Medium [Volume 5, Issue 2, 2019, Pages 390-401]
  • H. Ali, Farooq Effect of Two Baffles on MHD Natural Convection in U-Shape ‎Superposed by Solid Nanoparticle having Different Shapes [Volume 6, Special Issue, 2020, Pages 1200-1209]
  • Hamdi Cherif, Mountassir Exact Solution for Nonlinear Local Fractional Partial Differential Equations [Volume 6, Issue 2, 2020, Pages 200-208]
  • Hamoud, Ahmed A. Some New Existence, Uniqueness and Convergence Results for Fractional Volterra-Fredholm Integro-Differential Equations [Volume 5, Issue 1, 2019, Pages 58-69]
  • Hamzehei-Javaran, Saleh Time-Discontinuous Finite Element Analysis of Two-Dimensional Elastodynamic Problems using Complex Fourier Shape Functions [Volume 4, Special Issue: Applied and Computational Issues in Structural Engineering, 2018, Pages 442-456]
  • Hamzehei-Javaran, Saleh Improvement of Numerical Manifold Method using Nine-node ‎Quadrilateral and Ten-node Triangular Elements along with ‎Complex Fourier RBFs in Modeling Free and Forced Vibrations [Volume 7, Issue 4, 2021, Pages 2049-2063]
  • Hansapinyo, Chayanon Forced-based Shear-flexure-interaction Frame Element for Nonlinear Analysis of Non-ductile Reinforced Concrete Columns [Volume 6, Special Issue, 2020, Pages 1151-1167]
  • Hansapinyo, Chayanon Nonlinear Winkler-based Frame Element with Inclusion of Shear-Flexure Interaction Effect for Analysis of Non-Ductile RC Members on Foundation [Volume 7, Issue 1, 2021, Pages 148-164]
  • Hao, Le Van Bernoulli-Euler Beam Unsteady Bending Model with ‎Consideration of Heat and Mass Transfer [Volume 9, Issue 1, 2023, Pages 168-180]
  • Haputhanthri, Udith Nonlinear Multiscale Modelling and Design using Gaussian Processes [Volume 7, Issue 3, 2021, Pages 1583-1592]
  • Harfash, Akil J. Poiseuille Flow with Couple Stresses Effect and No-slip Boundary Conditions [Volume 6, Special Issue, 2020, Pages 1069-1083]
  • Harfash, Assma Perturbation-Iteration Algorithm for Solving Heat and Mass Transfer in the Unsteady Squeezing Flow between Parallel Plates [Volume 5, Issue 4, 2019, Pages 804-815]
  • Harish, Modalavalasa A Study on Effects of Thermal Radiative Dissipative MHD Non-Newtonian Nanofluid above an Elongating Sheet in Porous Medium [Volume 9, Issue 4, 2023, Pages 945-954]
  • Harish Babu, D Melting Heat Transfer and Radiation Effects on Jeffrey Fluid Flow over a Continuously Moving Surface with a Parallel Free Stream [Volume 5, Issue 2, 2019, Pages 468-476]
  • Hariti, Yassine Scaling Law of Permeability and Porosity for Fluid Transport ‎Phenomena in Porous PCM Media [Volume 7, Issue 1, 2021, Pages 84-92]
  • Harmand, Souad Analysis of Fluid Dynamics and Heat Transfer in a Rectangular Duct with Staggered Baffles [Volume 5, Issue 2, 2019, Pages 231-248]
  • HARMAND, SOUAD 3D Numerical Investigation of Heat Transfer Performance in Liquid-liquid Taylor Flow [Volume 10, Issue 1, 2024, Pages 183-204]
  • Hasan, Abu Sufian Modified Multi-level Residue Harmonic Balance Method for Solving Nonlinear Vibration Problem of Beam Resting on Nonlinear Elastic Foundation [Volume 5, Issue 4, 2019, Pages 627-638]
  • Hasan, Mohammad Sanjeed Numerical Investigation on Flow Transition through a Curved ‎Square Duct with Negative Rotation [Volume 7, Issue 3, 2021, Pages 1435-1447]
  • Hashemi, Seyed Hossein Thermodynamic Study of Water Activity of Single Strong Electrolytes [Volume 3, Issue 2, 2017, Pages 150-157]
  • Hashemi-Tilehnoee, Mehdi Viscous Dissipation Impact on Free Convection Flow of Cu-water Nanofluid in a Circular Enclosure with Porosity Considering Internal Heat Source [Volume 5, Issue 4, 2019, Pages 717-726]
  • Hashlamon, Iyad A New Adaptive Extended Kalman Filter for a Class of Nonlinear Systems [Volume 6, Issue 1, 2020, Pages 1-12]
  • Hassan, Amr Thermoelastic Memory-dependent Responses to an Infinite Medium ‎with a Cylindrical Hole and Temperature-dependent Properties [Volume 7, Issue 2, 2021, Pages 870-882]
  • Hassan Ahmed Hassan, Ahmed The Relations between the Various Critical Temperatures of Thin ‎FGM Plates [Volume 6, Special Issue, 2020, Pages 1404-1419]
  • Hassanzadeh, Mahdi Multi-objective Optimization of Shot-peening Parameters using ‎Design of Experiments and Finite Element Simulation: A ‎Statistical Model [Volume 8, Issue 3, 2022, Pages 838-852]
  • Hatami, Hossein Elastic-Plastic Analysis of Bending Moment – Axial Force Interaction in Metallic Beam of T-Section [Volume 5, Issue 1, 2019, Pages 162-173]
  • Hatami, M. Effect of Two Baffles on MHD Natural Convection in U-Shape ‎Superposed by Solid Nanoparticle having Different Shapes [Volume 6, Special Issue, 2020, Pages 1200-1209]
  • Hatami, M. Rotating Cylinder Turbulator Effect on the Heat Transfer of a ‎Nanofluid Flow in a Wavy Divergent Channel‎ [Volume 7, Issue 4, 2021, Pages 1987-1998]
  • Hazarika, Silpi Theoretical Investigation of Viscosity and Thermal Conductivity ‎of a Gas along a Non-isothermal Vertical Surface in Porous ‎Environment with Dissipative Heat: Numerical Technique [Volume 8, Issue 4, 2022, Pages 1236-1245]
  • He, Chun-Hui A Brief Review on the Asymptotic Methods for the Periodic ‎Behaviour of Microelectromechanical Systems [Volume 8, Issue 3, 2022, Pages 1120-1140]
  • He, Ji-Huan Variational Principle for the Generalized KdV-Burgers Equation with Fractal Derivatives for Shallow Water Waves [Volume 6, Issue 4, 2020, Pages 735-740]
  • He, Ji-Huan A Simple Approach to Volterra-Fredholm Integral Equations [Volume 6, Special Issue, 2020, Pages 1184-1186]
  • He, Ji-Huan Two Modifications of the Homotopy Perturbation Method for ‎Nonlinear Oscillators [Volume 6, Special Issue, 2020, Pages 1420-1425]
  • He, Ji-Huan A Variational Principle for a Nonlinear Oscillator Arising in the ‎Microelectromechanical System [Volume 7, Issue 1, 2021, Pages 78-83]
  • He, Ji-Huan A Brief Review on the Asymptotic Methods for the Periodic ‎Behaviour of Microelectromechanical Systems [Volume 8, Issue 3, 2022, Pages 1120-1140]
  • He, Ji-Huan Efficacy of a Modulated Viscosity-dependent Temperature/nanoparticles Concentration Parameter on a ‎Nonlinear Radiative Electromagneto-nanofluid Flow along an Elongated Stretching Sheet [Volume 9, Issue 3, 2023, Pages 848-860]
  • He, Ji-Huan A New Taylor Series based Numerical Method: Simple, Reliable, and Promising [Volume 9, Issue 4, 2023, Pages 1122-1134]
  • He, Ji-Huan Gold Nanoparticles’ Morphology Affects Blood Flow near a Wavy Biological Tissue Wall: An Application for Cancer Therapy [Volume 10, Issue 2, 2024, Pages 342-356]
  • He, Wei Sealing Performance of the End Fitting of a Marine Unbonded Flexible Pipe under Pressure Penetration [Volume 6, Issue 3, 2020, Pages 543-553]
  • Hedayati, Ali Optimization of Spark Ignition Engine Performance using a New ‎Double Intake Manifold: Experimental and Numerical Analysis [Volume 9, Issue 1, 2023, Pages 1-14]
  • Hedayati, Nima Investigation of Visco-rheological Properties of Polymeric Fluid on Electrothermal Pumping [Volume 10, Issue 1, 2024, Pages 164-182]
  • Heidari, Hamidreza Nonlinear Primary Frequency Response Analysis of Self-‎Sustaining Nanobeam Considering Surface Elasticity [Volume 8, Issue 4, 2022, Pages 1196-1207]
  • Hekmat, Mohamad Hamed Thermal Performance of Oscillating Blade with Various ‎Geometries in a Straight Channel [Volume 8, Issue 1, 2022, Pages 114-128]
  • Hematiyan, Mohammad Rahim Failure Procedure in Adhesive Composite Joints under Different Types of Loading [Volume 5, Issue 4, 2019, Pages 647-651]
  • Hepijid, Thanathorn A Study of Curved Louver Fin Configuration for ‎Heat Transfer Enhancement [Volume 8, Issue 2, 2022, Pages 754-763]
  • Herath, Sumudu Nonlinear Multiscale Modelling and Design using Gaussian Processes [Volume 7, Issue 3, 2021, Pages 1583-1592]
  • Herrera, Rafael Discretization of the 2D Convection–Diffusion Equation Using ‎Discrete Exterior Calculus [Volume 6, Special Issue, 2020, Pages 1348-1363]
  • Herskovits, Jose Damage Identification in a Multi-DOF System under Uncertainties Using Optimization Algorithms [Volume 4, Issue 4, 2018, Pages 365-374]
  • Hesameddini, Esmail A meshless method based on moving Kriging interpolation for the numerical solution of the transient flow of magnetohydrodynamic fractional Maxwell fluid equation [(Articles in Press)]
  • Hevko, Roman The Dynamics of the Working Body of the Tubular Conveyor with ‎the Chain Drive [Volume 7, Issue 3, 2021, Pages 1710-1718]
  • Heydari, Mohammad Haar Wavelet Method for Solving High-Order Differential Equations with Multi-Point Boundary Conditions [Volume 8, Issue 2, 2022, Pages 528-544]
  • Heydari, Mohammad Hossein A meshless method based on moving Kriging interpolation for the numerical solution of the transient flow of magnetohydrodynamic fractional Maxwell fluid equation [(Articles in Press)]
  • Heydari Beni, Mohsen Buckling and Free Vibration Analysis of Fiber Metal-laminated Plates Resting on Partial Elastic Foundation [Volume 6, Issue 1, 2020, Pages 37-51]
  • Heydari Beni, Mohsen Experimental and Numerical Buckling Analysis of Carbon Fiber Composite Lattice Conical Structure before and after Lateral Impact [Volume 6, Issue 4, 2020, Pages 813-822]
  • Hida, Nahid Nonlinear Biodynamic Models of the Hand-arm System and ‎Parameters Identification using the Vibration Transmissibility or ‎the Driving-point Mechanical Impedance [Volume 7, Issue 2, 2021, Pages 944-955]
  • Hieu, Dang Free Vibration Analysis of Quintic Nonlinear Beams using Equivalent Linearization Method with a Weighted Averaging [Volume 5, Issue 1, 2019, Pages 46-57]
  • Hieu, Dang Van Nonlinear Vibration of an Electrostatically Actuated ‎Functionally Graded Microbeam under Longitudinal Magnetic ‎Field [Volume 7, Issue 3, 2021, Pages 1537-1549]
  • HILLSTROM, Rajshree Biomechanical Evaluation of Bone Quality Effect on Stresses at Bone-Implant Interface: A Finite Element Study [Volume 7, Issue 3, 2021, Pages 1266-1275]
  • Hincapié Isaza, John Alexander Analysis of a Jet Pump Performance under Different Primary Nozzle ‎Positions and Inlet Pressures using two Approaches: One Dimensional ‎Analytical Model and Three Dimensional CFD Simulations‎ [Volume 6, Special Issue, 2020, Pages 1228-1244]
  • H. Kadhum, Abdul Amir Two-Dimensional Numerical Study of the Transient Flow ‎Conditions in Complete Shock Tunnel‎ [Volume 7, Issue 2, 2021, Pages 956-964]
  • Hoa, Nguyen Thi Nonlinear Vibration of an Electrostatically Actuated ‎Functionally Graded Microbeam under Longitudinal Magnetic ‎Field [Volume 7, Issue 3, 2021, Pages 1537-1549]
  • Hojaji, Mohammad An Experimental Comparison between Wing Root and Wingtip ‎Corrugation Patterns of Dragonfly Wing at Ultra-low Reynolds ‎Number and High Angles of Attack‎ [Volume 8, Issue 4, 2022, Pages 1176-1185]
  • Hoseini Asl, Mehrdad 3D Optimization of Gear Train Layout Using Particle Swarm Optimization Algorithm [Volume 6, Issue 4, 2020, Pages 823-840]
  • Hosen, Md Alal A Modified Energy Balance Method to Obtain Higher-order Approximations to the Oscillators with Cubic and Harmonic Restoring Force [Volume 6, Issue 2, 2020, Pages 320-331]
  • Hossain, Md. Anwar Analysis of Dual Solutions of Unsteady Micropolar Hybrid ‎Nanofluid Flow over a Stretching/Shrinking Sheet [Volume 7, Issue 1, 2021, Pages 19-33]
  • Hossain, Md. Najmul Dynamics of Damped and Undamped Wave Natures of the Fractional Kraenkel-Manna-Merle System in Ferromagnetic Materials [Volume 10, Issue 2, 2024, Pages 317-329]
  • Hosseini, Kamyar Numerical Simulation of Fuzzy Volterra Integro-differential ‎Equation using Improved Runge-Kutta Method [Volume 9, Issue 1, 2023, Pages 72-82]
  • Hosseini, Mahmood Experimental and Numerical Investigations on the Effect of Rectangular Openings’ Aspect Ratio on Outflow Discharge [Volume 4, Special Issue: Applied and Computational Issues in Structural Engineering, 2018, Pages 457-466]
  • Hosseini, Mojtaba Elastic-Plastic Analysis of Bending Moment – Axial Force Interaction in Metallic Beam of T-Section [Volume 5, Issue 1, 2019, Pages 162-173]
  • Hosseini Ravandi, S.A. Size-dependent Nonlinear Forced Vibration Analysis of Viscoelastic/Piezoelectric Nano-beam [Volume 7, Issue 4, 2021, Pages 1878-1891]
  • Hosseinzadeh, Narges Haar Wavelet Method for Solving High-Order Differential Equations with Multi-Point Boundary Conditions [Volume 8, Issue 2, 2022, Pages 528-544]
  • Hou, Chun Kit Jeffery Neural Networks with Input Dimensionality Reduction for ‎Efficient Temperature Distribution Prediction in a Warm ‎Stamping Process [Volume 8, Issue 4, 2022, Pages 1431-1444]
  • Hou, Shi-Cheng Different Groups of Variational Principles for Whitham-Broer-‎Kaup Equations in Shallow Water [Volume 6, Special Issue, 2020, Pages 1178-1183]
  • Hu, Jiansheng Design of Cooling Water System (CWS) for CRAFT Lower Hybrid ‎Current Driven (LHCD) System‎ [Volume 7, Issue 2, 2021, Pages 470-477]
  • Huang, Bin An Analysis of Nonlinear Beam Vibrations with the Extended ‎Rayleigh-Ritz Method [Volume 8, Issue 4, 2022, Pages 1299-1306]
  • Huang, Qi The Integrated Analysis of Vibrations of Quartz Crystal Plates ‎through Artificial Coupling Factors [Volume 7, Issue 1, 2021, Pages 69-77]
  • Huang, Zemin How Wavelike Bumps Mitigate the Vortex-induced Vibration of a ‎Drilling Riser [Volume 7, Issue 3, 2021, Pages 1413-1424]
  • Hui, Nirmal Baran Analysis and Optimization of Truss Structures, Constrained ‎Handling using Genetic Algorithm [Volume 7, Issue 3, 2021, Pages 1324-1333]
  • Husnine, Syed Muhammad Heat and Mass Transfer of Natural Convective Flow with Slanted ‎Magnetic Field via Fractional Operators [Volume 7, Issue 1, 2021, Pages 189-212]
  • Hussain, Anwar On Stokes' Second Problem for Burgers' Fluid over a Plane Wall [Volume 7, Issue 3, 2021, Pages 1514-1526]
  • Hussein, Maha A. The Optimal Design of Heat Sinks: A Review [Volume 6, Issue 4, 2020, Pages 1030-1043]

I

  • Ibrahim, Saeed A.A. Thermal Performance Study of Plate-finned Vapor Chamber Heat Sink [Volume 10, Issue 2, 2024, Pages 304-316]
  • Ibrahim, Shaik Mohammed A Study on Effects of Thermal Radiative Dissipative MHD Non-Newtonian Nanofluid above an Elongating Sheet in Porous Medium [Volume 9, Issue 4, 2023, Pages 945-954]
  • Iftikhar, Nazish Heat and Mass Transfer of Natural Convective Flow with Slanted ‎Magnetic Field via Fractional Operators [Volume 7, Issue 1, 2021, Pages 189-212]
  • Igaadi, Amal Numerical Investigation into the Effects of Orientation on ‎Subcooled Flow Boiling Characteristics [Volume 9, Issue 2, 2023, Pages 464-474]
  • Igumnov, Leonid A. Investigation of Wood Properties at Elevated Temperature [Volume 8, Issue 1, 2022, Pages 298-305]
  • Igumnov, Leonid Dynamic Response of a Step Loaded Cubic Cavity Embedded in a ‎Partially Saturated Poroelastic Half-space by the Boundary ‎Element Method [Volume 8, Issue 1, 2022, Pages 331-339]
  • Igumnov, Leonid The Direct Impact Method for Studying Dynamic Behavior of ‎Viscoplastic Materials [Volume 8, Issue 2, 2022, Pages 597-604]
  • Igumnov, Leonid Experimental Study and Identification of a Dynamic ‎Deformation Model of Dry Clay at Strain Rates up to 2500 s-1‎ [Volume 8, Issue 3, 2022, Pages 981-995]
  • Ilegbusi, Adeleke Heat Transfer Analysis of Nanofluid Flow with Porous Medium through Jeffery Hamel Diverging/Converging Channel [Volume 6, Issue 3, 2020, Pages 433-444]
  • Ilegbusi, Adeleke Thermal Analysis of Radiating Film Flow of Sodium Alginate ‎using MWCNT Nanoparticles ‎ [Volume 8, Issue 1, 2022, Pages 219-231]
  • ILGAMOV, Marat A. Influence of Pressure on the Frequency Spectrum of Micro and ‎Nanoresonators on Hinged Supports [Volume 7, Issue 2, 2021, Pages 977-983]
  • Il‘in, Alexander A Case Study of Combined Application of Smart Materials in a ‎Thermal Energy Harvester with Vibrating Action [Volume 7, Issue 1, 2021, Pages 372-381]
  • Imeni Markhali, Milad Characterization of the Nonlinear Biaxial Mechanical Behavior ‎of Human Ureter using Constitutive Modeling and Artificial ‎Neural Networks [Volume 8, Issue 4, 2022, Pages 1186-1195]
  • Imjai, Thanongsak Forced-based Shear-flexure-interaction Frame Element for Nonlinear Analysis of Non-ductile Reinforced Concrete Columns [Volume 6, Special Issue, 2020, Pages 1151-1167]
  • Imjai, Thanongsak Shear-flexure Interaction Frame Model on Kerr-type Foundation ‎for Analysis of Non-ductile RC Members on Foundation [Volume 8, Issue 3, 2022, Pages 1076-1090]
  • Impiombato, Andrea Natale Prediction Capabilities of a One-dimensional Wall-flow ‎Particulate Filter Model [Volume 8, Issue 1, 2022, Pages 245-259]
  • Impiombato, Andrea Natale Constructal Design of an Idealize Arterial Bypass Graft: Effect of ‎the Bypass Attachment Pointon Resistance to Flow‎ [Volume 7, Issue 1, 2021, Pages 334-344]
  • Imran, Muhammad Effects of Non-Linear Thermal Radiation and Chemical Reaction ‎on Time Dependent Flow of Williamson Nanofluid With Combine ‎Electrical MHD and Activation Energy [Volume 7, Issue 2, 2021, Pages 546-558]
  • Indeitsev, Dmitry Hemispherical Resonator of a Rate-integrating Gyroscope: A ‎Novel Method for Determination of Eigenfrequencies and ‎Eigenforms in Presence of Imperfections‎ [Volume 9, Issue 4, 2023, Pages 915-925]
  • Indumathi, N. Heat Transfer of Hybrid-nanofluids Flow Past a Permeable Flat Surface with Different Volume Fractions [Volume 8, Issue 1, 2022, Pages 21-35]
  • Inman, Daniel J. Temperature Dependent Damping in Additively Manufactured ‎Polymer Structures [Volume 7, Special Issue, 2021, Pages 993-1008]
  • Inman, Daniel J. Frequency Separation in Architected Structures using Inverse Methods [Volume 7, Issue 4, 2021, Pages 2084-2095]
  • Ipek, Cengiz Vibration Analysis of Shear Deformable Cylindrical Shells Made ‎of Heterogeneous Anisotropic Material with Clamped Edges [Volume 9, Issue 3, 2023, Pages 861-869]
  • Ipek, Cengiz Buckling Behavior of Nanocomposite Plates with Functionally ‎Graded Properties under Compressive Loads in Elastic and ‎Thermal Environments [Volume 9, Issue 4, 2023, Pages 974-986]
  • Ipinnimo, Olufemi Dynamic Analysis of the Biomechanical Model of Head Load Impact Using Differential Transform Method [Volume 6, Issue 4, 2020, Pages 893-907]
  • Irschik, Hans Structural Health Monitoring of Multi-Storey Frame Structures using Piezoelectric Incompatibility Filters: Theory and Numerical Verification [Volume 7, Special Issue, 2021, Pages 1138-1157]
  • Irschik, Hans Stress Control of a Piezoelectric Lumped-element Model − ‎Theoretical Investigation and Experimental Realization [Volume 7, Special Issue, 2021, Pages 1110-1120]
  • Isametov, Aysen Computational and Experimental Study of the Composite ‎Material for the Centrifugal Pump Impellers Manufacturing [Volume 8, Issue 4, 2022, Pages 1407-1421]
  • Isametova, Madina Computational and Experimental Study of the Composite ‎Material for the Centrifugal Pump Impellers Manufacturing [Volume 8, Issue 4, 2022, Pages 1407-1421]
  • Isaza Merino, Cesar Augusto Fluid-dynamic Simulations for Assessment of Dimensioning ‎Methodologies of Pelton Turbine Buckets Considering the Initial ‎Torque Overcoming [Volume 9, Issue 4, 2023, Pages 1036-1048]
  • Ishak, Anuar Insight into Stability Analysis on Modified Magnetic Field of ‎Radiative Non-Newtonian Reiner–Philippoff Fluid Model‎ [Volume 8, Issue 2, 2022, Pages 745-753]
  • Islam, Saeed Comparative Study of Plane Poiseuille Flow of Non-isothermal ‎Couple ‎Stress Fluid of Reynold Viscosity Model using Optimal ‎Homotopy ‎Asymptotic Method and New Iterative Method [Volume 7, Issue 2, 2021, Pages 404-414]
  • Islam, Shariful An analytical Technique for Solving New Computational ‎Solutions of the Modified Zakharov-Kuznetsov ‎Equation Arising ‎in Electrical Engineering [Volume 7, Issue 2, 2021, Pages 715-726]
  • Ismail, Gamal An Analytical Technique for Solving Nonlinear Oscillators of the Motion of a Rigid Rod Rocking Bock and Tapered Beams [Volume 2, Issue 1, 2016, Pages 29-34]
  • Ismail, Gamal Periodic Solutions of the Duffing Harmonic Oscillator by He's Energy Balance Method [Volume 2, Issue 1, 2016, Pages 35-41]
  • Ismail, Gamal A Modified Energy Balance Method to Obtain Higher-order Approximations to the Oscillators with Cubic and Harmonic Restoring Force [Volume 6, Issue 2, 2020, Pages 320-331]
  • Ismail, S. O. Analytical Investigations of the Effects of Tool Pin Profile and Process Parameters on the Peak Temperature in Friction Stir Welding [Volume 3, Issue 2, 2017, Pages 114-124]
  • Ismaila, M. A. Modeling of heat generations for different tool profiles in friction stir welding: study of tool geometry and contact conditions [Volume 3, Issue 1, 2017, Pages 37-59]
  • Ismayilov, Mahmud Theory and Experiment in Predicting the Strength of Hybrid ‎Fiber Metal Laminates [Volume 9, Issue 4, 2023, Pages 987-999]
  • Isoldi, Liércio André A Novel BESO Methodology for Topology Optimization of ‎Reinforced Concrete Structures: A Two-loop Approach [Volume 9, Issue 2, 2023, Pages 498-512]
  • Isoldi, Liércio André Multiobjective Geometric Analysis of Stiffened Plates under ‎Bending through Constructal Design Method [Volume 6, Special Issue, 2020, Pages 1438-1449]
  • Isoldi, Liércio André Numerical Study and Geometric Investigation of Corrugated ‎Channels Subjected to Forced Convective Flows [Volume 7, Issue 2, 2021, Pages 727-738]
  • Isoldi, Liércio André Applicability Evidence of Constructal Design in Structural ‎Engineering: Case Study of Biaxial Elasto-Plastic Buckling of ‎Square Steel Plates with Elliptical Cutout [Volume 7, Issue 2, 2021, Pages 922-934]
  • Isoldi, Liércio André WaveMIMO Methodology: Numerical Wave Generation of a ‎Realistic Sea State‎ [Volume 7, Issue 4, 2021, Pages 2129-2148]
  • Iuzhina, Tatiana N. Investigation of Wood Properties at Elevated Temperature [Volume 8, Issue 1, 2022, Pages 298-305]
  • Ivanov, Vladimir Matrix Equations of the Motion of Multibody Systems with a Tree Structure in Hamiltonian Variables [Volume 9, Issue 4, 2023, Pages 1107-1121]
  • Ivanova, Jordanka Two-dimensional Stress and strain Analysis for Graphene-‎polymer Nanocomposite under Axial Load [Volume 8, Issue 3, 2022, Pages 1065-1075]
  • Ivanova, S.V. Numerical Investigation of Enhanced Oil Recovery from various ‎Rocks by Nanosuspensions Flooding [Volume 8, Issue 1, 2022, Pages 306-318]
  • Izadpanah, Ebrahim Time-Discontinuous Finite Element Analysis of Two-Dimensional Elastodynamic Problems using Complex Fourier Shape Functions [Volume 4, Special Issue: Applied and Computational Issues in Structural Engineering, 2018, Pages 442-456]
  • Izadpanah, Ehsan Thermal Performance of Oscillating Blade with Various ‎Geometries in a Straight Channel [Volume 8, Issue 1, 2022, Pages 114-128]

J

  • Jaamialahmadi, Abdolrahman An investigation the effects of geometric tolerances on the natural frequencies of rotating shafts [Volume 1, Issue 2, 2015, Pages 103-111]
  • Jafari, Akbar Stress Intensity Factor Expression for Welded Butt Joint with Undercut and Inclined Lack of Penetration Defects considering the Effect of Joint Shape [Volume 6, Issue 4, 2020, Pages 878-892]
  • Jafari, Saeed Investigation of Nanofluid Natural Convection Heat Transfer in ‎Open Ended L-shaped Cavities utilizing LBM [Volume 7, Issue 4, 2021, Pages 2064-2083]
  • Jafari, Sanaz Elastic Limit Angular Velocity and Acceleration Investigation in Non-‎Uniform Rotating Disk under Time-Dependent Mechanical Loading [Volume 8, Issue 3, 2022, Pages 791-808]
  • Jafarian, Farshid Experimental Investigation and Optimizing Geometrical Characteristics and Surface Quality in Drilling of AISI H13 Steel [Volume 6, Issue 2, 2020, Pages 332-343]
  • Jafari Fesharaki, Javad Elastic Behavior of Functionally Graded Two Tangled Circles Chamber [Volume 5, Issue 4, 2019, Pages 667-679]
  • Jafari Fesharaki, Javad 3D Optimization of Gear Train Layout Using Particle Swarm Optimization Algorithm [Volume 6, Issue 4, 2020, Pages 823-840]
  • Jahangiri, Mehran Clogged Impeller Diagnosis in the Centrifugal Pump Using the Vibration and Motor Current Analysis [Volume 4, Issue 4, 2018, Pages 310-317]
  • Jahanian, Omid Potential of Semi-Empirical Heat Transfer Models in Predicting ‎the Effects of Equivalence Ratio on Low Temperature Reaction ‎and High Temperature Reaction Heat Release of an HCCI Engine [Volume 9, Issue 1, 2023, Pages 45-57]
  • Jain, Amit Kumar Modified Rectangular Patch Antenna Loaded With Multiple C Slots for Multiple Applications [Volume 2, Issue 3, 2016, Pages 192-199]
  • Jain, Amit Kumar Modified U-Slot Stacked Micro-Strip Patch Antenna for Ultra-Wideband Applications in S Band, C Band and X Band [Volume 3, Issue 4, 2017, Pages 293-301]
  • Jain, Shilpi Performance Analysis of Segmentation of Hyperspectral Images Based on Color Image Segmentation [Volume 3, Issue 2, 2017, Pages 144-149]
  • Jalali, Ali Mesoscopic Simulation of Forced Convective Heat Transfer of Carreau-Yasuda Fluid Flow over an Inclined Square: Temperature-dependent Viscosity [Volume 6, Issue 2, 2020, Pages 307-319]
  • Jalali, Ali Optimization of Spark Ignition Engine Performance using a New ‎Double Intake Manifold: Experimental and Numerical Analysis [Volume 9, Issue 1, 2023, Pages 1-14]
  • Jalili Ghazizadeh, Mohammadreza Experimental and Numerical Investigations on the Effect of Rectangular Openings’ Aspect Ratio on Outflow Discharge [Volume 4, Special Issue: Applied and Computational Issues in Structural Engineering, 2018, Pages 457-466]
  • Jamalbayli, Tayfun Algorithm for Determining the Permeability and Compaction ‎Properties of a Gas Condensate Reservoir based on a Binary Model [Volume 8, Issue 3, 2022, Pages 1014-1022]
  • Jamalbayov, Mahammad Algorithm for Determining the Permeability and Compaction ‎Properties of a Gas Condensate Reservoir based on a Binary Model [Volume 8, Issue 3, 2022, Pages 1014-1022]
  • Jamali, Majid Uniaxial Buckling Analysis Comparison of Nanoplate and Nanocomposite Plate with Central Square Cut out Using Domain Decomposition Method [Volume 2, Issue 4, 2016, Pages 230-242]
  • Jamil, Muhammad Traveling Wave Solutions of 3D Fractionalized MHD Newtonian Fluid in Porous Medium with Heat Transfer [Volume 6, Issue 4, 2020, Pages 968-984]
  • Jankowski, Łukasz On/off Nodal Reconfiguration for Global Structural Control of ‎Smart 2D Frames [Volume 7, Special Issue, 2021, Pages 1121-1129]
  • Jarndal, Anwar On the Usefulness of Pre-processing Methods in Rotating ‎Machines Faults Classification using Artificial Neural Network [Volume 7, Issue 1, 2021, Pages 254-261]
  • Jassim, Bashaeer K. Numerical Simulation of Non-Newtonian Inelastic Flows in Channel based on Artificial Compressibility Method [Volume 6, Issue 2, 2020, Pages 271-283]
  • Jassim, Hassan Kamil Fractional Sumudu Decomposition Method for Solving PDEs of Fractional Order [Volume 7, Issue 1, 2021, Pages 302-311]
  • Javaherdeh, Kourosh Temperature Effect on Moving Water Droplets at the Channel of ‎PEMFC by Multi-component Multiphase Lattice Boltzmann Method [Volume 9, Issue 3, 2023, Pages 607-622]
  • Javanian Jouybari, Hamid Determination of Periodic Solution for Tapered Beams with Modified Iteration Perturbation Method [Volume 1, Issue 1, 2015, Pages 44-51]
  • Javaniyan Jouybari, Hamid Solution of strongly nonlinear oscillator problem arising in Plasma Physics with Newton Harmonic Balance Method [Volume 1, Issue 2, 2015, Pages 59-66]
  • Javanmard, Mohsen Magnetohydrodynamics Fluid Flow and Heat Transfer over a Permeable Shrinking Sheet with Joule dissipation: Analytical Approach [Volume 6, Issue 4, 2020, Pages 999-1011]
  • Javidpoor, Sara Time integration of rectangular membrane free vibration using spline-based differential quadrature [Volume 2, Issue 2, 2016, Pages 74-79]
  • Jayachandra Babu, Macherla Nonlinear Convective Flow of Maxwell Fluid over a Slendering Stretching Sheet with Heat Source/Sink [Volume 8, Issue 1, 2022, Pages 60-70]
  • Jayakumar, V. Effect of Tool Shoulder and Pin Cone Angles in Friction Stir Welding using Non-circular Tool Pin [Volume 6, Issue 3, 2020, Pages 554-563]
  • Jayaprakash, R. Heat Transfer of Hybrid-nanofluids Flow Past a Permeable Flat Surface with Different Volume Fractions [Volume 8, Issue 1, 2022, Pages 21-35]
  • Jayaramireddy, Konda Nonlinear Convective Flow of Maxwell Fluid over a Slendering Stretching Sheet with Heat Source/Sink [Volume 8, Issue 1, 2022, Pages 60-70]
  • Jayesimi, Lawrence Olumide Modeling of heat generations for different tool profiles in friction stir welding: study of tool geometry and contact conditions [Volume 3, Issue 1, 2017, Pages 37-59]
  • Jayesimi, Lawrence Olumide Analytical Investigations of the Effects of Tool Pin Profile and Process Parameters on the Peak Temperature in Friction Stir Welding [Volume 3, Issue 2, 2017, Pages 114-124]
  • Jena, Rajarama Mohan Residual Power Series Method for Solving Time-fractional Model of Vibration Equation of Large Membranes [Volume 5, Issue 4, 2019, Pages 603-615]
  • Jena, Rajarama Mohan Dynamic Response Analysis of Fractionally Damped Beams Subjected to External Loads using Homotopy Analysis Method [Volume 5, Issue 2, 2019, Pages 355-366]
  • Jena, Subrat Kumar Dynamic Response Analysis of Fractionally Damped Beams Subjected to External Loads using Homotopy Analysis Method [Volume 5, Issue 2, 2019, Pages 355-366]
  • Jerves, Alex X. A Nonlinear Lagrangian Model for Plane Frames Pre-design [Volume 9, Issue 3, 2023, Pages 884-899]
  • Jeyar, Mohammed Random Walk Particle Tracking for Convection-diffusion ‎Dominated Problems in Shallow Water Flows [Volume 7, Issue 2, 2021, Pages 486-495]
  • Jia, Qing Comprehensive Investigating on the Aerodynamic Influences of the Wheel Contact Patch [Volume 6, Issue 4, 2020, Pages 934-955]
  • Jiann, Lim Yeou Mathematical Modelling of MHD Blood Flow with Gold Nanoparticles in Slip Small Arteries [Volume 10, Issue 1, 2024, Pages 125-139]
  • Jing, D. Effect of Two Baffles on MHD Natural Convection in U-Shape ‎Superposed by Solid Nanoparticle having Different Shapes [Volume 6, Special Issue, 2020, Pages 1200-1209]
  • Jing, Dengwei Rotating Cylinder Turbulator Effect on the Heat Transfer of a ‎Nanofluid Flow in a Wavy Divergent Channel‎ [Volume 7, Issue 4, 2021, Pages 1987-1998]
  • Jing, Huimin An Analysis of Nonlinear Beam Vibrations with the Extended ‎Rayleigh-Ritz Method [Volume 8, Issue 4, 2022, Pages 1299-1306]

K

  • Kabeel, A Vibration Analysis of Material Size-Dependent CNTs Using Energy Equivalent Model [Volume 4, Issue 2, 2018, Pages 75-86]
  • Kabganian, Mansour Design of an Adaptive-Neural Network Attitude Controller of a Satellite using Reaction Wheels [Volume 1, Issue 2, 2015, Pages 67-73]
  • Kabi, Amer Time integration of rectangular membrane free vibration using spline-based differential quadrature [Volume 2, Issue 2, 2016, Pages 74-79]
  • Kaci, Abdelhakim Buckling Analysis of Embedded Nanosize FG Beams Based on a Refined Hyperbolic Shear Deformation Theory [Volume 4, Issue 3, 2018, Pages 140-146]
  • Kadhim, Hakim T. Local Thermal Non-equilibrium Analysis of Cu-Al2O3 Hybrid ‎Nanofluid Natural Convection in a Partially Layered Porous ‎Enclosure with Wavy Walls [Volume 9, Issue 3, 2023, Pages 712-727]
  • KADIOĞLU, Fethi An Alternative Procedure for Longitudinal Vibration Analysis of ‎Bars with Arbitrary Boundary Conditions [Volume 9, Issue 1, 2023, Pages 294-301]
  • Kadir, Ali Multiple Solutions for Slip Effects on Dissipative Magneto-Nanofluid Transport Phenomena in Porous Media: Stability Analysis [Volume 6, Issue 4, 2020, Pages 956-967]
  • Kadivar, Mohammad Hassan Failure Procedure in Adhesive Composite Joints under Different Types of Loading [Volume 5, Issue 4, 2019, Pages 647-651]
  • Kadmim, Habeeb Fractional Sumudu Decomposition Method for Solving PDEs of Fractional Order [Volume 7, Issue 1, 2021, Pages 302-311]
  • Kakavand, Farshad Vibration Analysis of Different Types of Porous FG Conical Sandwich Shells in Various Thermal Surroundings [Volume 6, Issue 3, 2020, Pages 416-432]
  • Kalivanan, K. Slip Effects on Ohmic Dissipative Non-Newtonian Fluid Flow in the Presence of Aligned Magnetic Field [Volume 6, Issue 2, 2020, Pages 296-306]
  • Kalyasov, Pavel Method of Unsteady Hydrodynamic Characteristics ‎Determination in Turbulent Boundary Layer [Volume 7, Issue 2, 2021, Pages 849-857]
  • Kamal, M.A.S. A Modified Energy Balance Method to Obtain Higher-order Approximations to the Oscillators with Cubic and Harmonic Restoring Force [Volume 6, Issue 2, 2020, Pages 320-331]
  • Kamdi, Dilip B Thermoelastic Analysis of Functionally Graded Hollow Cylinder Subjected to Uniform Temperature Field [Volume 2, Issue 2, 2016, Pages 118-127]
  • Kamel, Mohamed Miscellaneous Modeling Approaches and Testing of a Satellite Honeycomb Sandwich Plate [Volume 6, Special Issue, 2020, Pages 1084-1097]
  • Kameswaran, Peri K. Rotating Cylinder Turbulator Effect on the Heat Transfer of a ‎Nanofluid Flow in a Wavy Divergent Channel‎ [Volume 7, Issue 4, 2021, Pages 1987-1998]
  • Kamil Jassim, Hassan A Novel Approach for Korteweg-de Vries Equation of Fractional Order [Volume 5, Issue 2, 2019, Pages 192-198]
  • Kamiyo, Ola Multi-boiling Heat Transfer Analysis of a Convective Straight Fin with Temperature-Dependent Thermal Properties and Internal Heat Generation [Volume 3, Issue 4, 2017, Pages 229-239]
  • Karaivanov, Dimitar Computational and Experimental Study of the Composite ‎Material for the Centrifugal Pump Impellers Manufacturing [Volume 8, Issue 4, 2022, Pages 1407-1421]
  • Karami, Fatemeh Power Law Nanofluid through Tapered Artery based on a ‎Consistent Couple Stress Theory [Volume 9, Issue 3, 2023, Pages 623-636]
  • Karanjule, D. B. Determination of the Optimal Reduction Ratio for Least Springback during Cold Drawing of Seamless Tubes [Volume 4, Issue 4, 2018, Pages 275-285]
  • Kareem, Rasaq Analysis of Transient Rivlin-Ericksen Fluid and Irreversibility of Exothermic Reactive Hydromagnetic Variable Viscosity [Volume 6, Issue 1, 2020, Pages 26-36]
  • Kari, Mohammadreza Calculation of Backscattered Ultrasonic Waves Field from a ‎Copper-clad Steel Rod Immersing in Water and Effect of Clad ‎Corrosion and Interfacial Disbond between Clad and Rod Defects ‎on this Field using the Finite Element Method [Volume 9, Issue 1, 2023, Pages 58-71]
  • Karimnejad, Sajjad Mesoscopic Simulation of Forced Convective Heat Transfer of Carreau-Yasuda Fluid Flow over an Inclined Square: Temperature-dependent Viscosity [Volume 6, Issue 2, 2020, Pages 307-319]
  • Karimnejad, Sajjad An Exact Analytical Solution for Heat Conduction in a ‎Functionally Graded Conical Shell [Volume 9, Issue 2, 2023, Pages 302-317]
  • Karpov, Alexander I. Prediction of the Supersonic Flow Base Pressure by Axisymmetric ‎Direct Numerical Simulation [Volume 9, Issue 3, 2023, Pages 739-748]
  • Karskanov, Sergey A. Prediction of the Supersonic Flow Base Pressure by Axisymmetric ‎Direct Numerical Simulation [Volume 9, Issue 3, 2023, Pages 739-748]
  • Kassem, Magda M. Behavior of Nanofluid with Variable Brownian and Thermal ‎Diffusion Coefficients Adjacent to a Moving Vertical Plate [Volume 7, Issue 3, 2021, Pages 1466-1479]
  • Kassem, Mohammed Miscellaneous Modeling Approaches and Testing of a Satellite Honeycomb Sandwich Plate [Volume 6, Special Issue, 2020, Pages 1084-1097]
  • Katiyar, Vinod Kumar A Numerical Simulation of Inspiratory Airflow in Human Airways during Exercise at Sea Level and at High Altitude [Volume 5, Issue 1, 2019, Pages 70-76]
  • Katsikadelis, John T. Saint-Venant torsion of non-homogeneous anisotropic bars [Volume 2, Issue 1, 2016, Pages 42-53]
  • Kazemi, Reza A Comparative Study on the Efficiency of Compiled Languages ‎and MATLAB/Simulink for Simulation of Highly Nonlinear ‎Automotive Systems [Volume 8, Issue 3, 2022, Pages 853-864]
  • Kazemi, Reza Time Distance: A Novel Collision Prediction and Path Planning Method [Volume 9, Issue 3, 2023, Pages 656-677]
  • Kazemi Jouybari, Ammar Numerical and Analytical Approach for Film Condensation on Different Forms of Surfaces [Volume 5, Issue 5, 2019, Pages 964-975]
  • Kazemzadeh Hannani, Siamak Numerical Study on the Ferrofluid Droplet Splitting in a T-junction ‎with Branches of Unequal Widths using Asymmetric Magnetic Field‎ [Volume 9, Issue 2, 2023, Pages 357-370]
  • Kedar, G. D. Springbackward Phenomenon of a Transversely Isotropic Functionally Graded Composite Cylindrical Shell [Volume 2, Issue 3, 2016, Pages 134-143]
  • Kelly, Ger Impact Dynamics of Nonlinear Materials: FE Analysis [Volume 9, Issue 3, 2023, Pages 728-738]
  • Keshava Reddy, E. Multivariate Jeffrey Fluid Flow past a Vertical Plate through Porous Medium [Volume 6, Issue 3, 2020, Pages 605-616]
  • Keshtegar, Behrooz Conjugate and Directional Chaos Control Methods for Reliability Analysis of CNT–Reinforced Nanocomposite Beams under Buckling Forces; A Comparative Study [Volume 2, Issue 3, 2016, Pages 144-151]
  • Keshtegar, Behrooz Reliability Analysis of Nanocomposite Beams Reinforced with CNTs under Buckling Forces Using the Conjugate HL-RF [Volume 2, Issue 4, 2016, Pages 200-207]
  • Khademalrasoul, Abdolghafoor Local and Global Approaches to Fracture Mechanics Using Isogeometric Analysis Method [Volume 1, Issue 4, 2015, Pages 168-180]
  • Khademalrasoul, Abdolghafour NURBS-Based Isogeometric Analysis Method Application to Mixed-Mode Computational Fracture Mechanics [Volume 5, Issue 2, 2019, Pages 217-230]
  • Khademi, Alireza Heat Transfer Improvement in a Thermal Energy Storage System ‎using Auxiliary Fluid Instead of Nano-PCM in an Inclined ‎Enclosure: A Comparative Study [Volume 9, Issue 2, 2023, Pages 475-486]
  • Khajehdehi Kavanroodi, Mehdi Buckling and Vibration Analysis of a Double-layer Graphene ‎Sheet Coupled with a Piezoelectric Nanoplate [Volume 8, Issue 1, 2022, Pages 129-143]
  • Khajezade Roodi, Mostafa Optimization of Spark Ignition Engine Performance using a New ‎Double Intake Manifold: Experimental and Numerical Analysis [Volume 9, Issue 1, 2023, Pages 1-14]
  • KHAKIMOV, Akim G. Influence of Pressure on the Frequency Spectrum of Micro and ‎Nanoresonators on Hinged Supports [Volume 7, Issue 2, 2021, Pages 977-983]
  • Khalil, Khalil M. Thermoelastic Vibrations of Nonlocal Nanobeams Resting on a ‎Pasternak Foundation via DPL Model [Volume 7, Issue 1, 2021, Pages 34-44]
  • Khalil, Munam New Exact Traveling Wave Solutions for Fractional Order System ‎Describing the Second Grade Fluid through Medium with Heat ‎Transfer‎ [Volume 7, Issue 2, 2021, Pages 764-781]
  • Khalili, S. Mohammad Reza Low Velocity Impact Response of Laminated Composite Truncated Sandwich Conical Shells with Various Boundary Conditions Using Complete Model and GDQ Method [Volume 3, Issue 1, 2017, Pages 1-15]
  • Khalili, S. Mohammad Reza Free Vibration of a Thick Sandwich Plate Using Higher Order Shear Deformation Theory and DQM for Different Boundary Conditions [Volume 3, Issue 1, 2017, Pages 16-24]
  • Khalsa, Lalsingh Quasi-Static Transient Thermal Stresses in an Elliptical Plate due to Sectional Heat Supply on the Curved Surfaces over the Upper Face [Volume 4, Issue 1, 2018, Pages 27-39]
  • K. Hamzah, Hameed Effect of Two Baffles on MHD Natural Convection in U-Shape ‎Superposed by Solid Nanoparticle having Different Shapes [Volume 6, Special Issue, 2020, Pages 1200-1209]
  • Khan, Afrasyab Experimental Study of the Heat Transfer Enhancement in Concentric Tubes With Spherical and Pyramidal Protrusions [Volume 6, Issue 4, 2020, Pages 801-812]
  • Khan, Alamgeer Comparative Study of Plane Poiseuille Flow of Non-isothermal ‎Couple ‎Stress Fluid of Reynold Viscosity Model using Optimal ‎Homotopy ‎Asymptotic Method and New Iterative Method [Volume 7, Issue 2, 2021, Pages 404-414]
  • Khan, Bilal Applications of Higher-Order Derivatives to the Subclasses of ‎Meromorphic Starlike Functions [Volume 7, Issue 1, 2021, Pages 321-333]
  • Khan, B. Md. Hidayathulla Viscoelastic Micropolar Convection Flows from an Inclined Plane with Nonlinear Temperature: A Numerical Study [Volume 6, Issue 2, 2020, Pages 183-199]
  • Khan, B. Md. Hidayathulla Melting Heat Transfer Analysis on Magnetohydrodynamics Buoyancy Convection in an Enclosure: A Numerical Study [Volume 6, Issue 1, 2020, Pages 52-62]
  • Khan, Ishaque Quasi-Static Transient Thermal Stresses in an Elliptical Plate due to Sectional Heat Supply on the Curved Surfaces over the Upper Face [Volume 4, Issue 1, 2018, Pages 27-39]
  • Khan, Masood On Stokes' Second Problem for Burgers' Fluid over a Plane Wall [Volume 7, Issue 3, 2021, Pages 1514-1526]
  • Khan, Nazar Applications of Higher-Order Derivatives to the Subclasses of ‎Meromorphic Starlike Functions [Volume 7, Issue 1, 2021, Pages 321-333]
  • Khan, Saeed Ullah A Kinetic Flux-vector Splitting Scheme for Two-layer Shallow Flow Model [Volume 8, Issue 3, 2022, Pages 1043-1053]
  • Khan, Sudheer Diffusion-thermo Effects in Stagnation Point Flow of Second ‎Grade Fluid past a Stretching Plate [Volume 7, Issue 2, 2021, Pages 902-912]
  • Khan, Tufail A. Modified Variational Iteration Technique for the Numerical ‎Solution of Fifth Order KdV-type Equations [Volume 6, Special Issue, 2020, Pages 1220-1227]
  • Khan, Umar Jeffery Hamel Flow of a non-Newtonian Fluid [Volume 2, Issue 1, 2016, Pages 21-28]
  • Khan, Yasir Analytical Solution of Linear, Quadratic and Cubic Model of PTT Fluid [Volume 1, Issue 4, 2015, Pages 220-228]
  • Khandan, Amirsalar Nanostructure, Molecular Dynamics Simulation and Mechanical Performance of PCL Membranes Reinforced with Antibacterial Nanoparticles [Volume 7, Issue 4, 2021, Pages 1907-1915]
  • Khashi’ie, Najiyah Safwa Insight into Stability Analysis on Modified Magnetic Field of ‎Radiative Non-Newtonian Reiner–Philippoff Fluid Model‎ [Volume 8, Issue 2, 2022, Pages 745-753]
  • Khatami, Iman Efficient Solution of Nonlinear Duffing Oscillator [Volume 6, Issue 2, 2020, Pages 219-234]
  • Khatibi, Mohammad Mahdi Estimating the Mode Shapes of a Bridge Using Short Time Transmissibility Measurement from a Passing Vehicle [Volume 5, Issue 4, 2019, Pages 735-748]
  • Khayat, Morteza Numerical Investigation on Slot air Jet impingement Heat Transfer between Horizontal Concentric Circular Cylinders [Volume 1, Issue 2, 2015, Pages 74-82]
  • Khedher, Khaled Mohamed On the Thermomechanical Behavior of Laminated Composite Plates using different Micromechanical-based Models for Coefficients of Thermal Expansion (CTE) [Volume 10, Issue 2, 2024, Pages 224-244]
  • Khelifi, Cherif Structural Strength Analysis and Fabrication of a Straight Blade of an H-Darrieus Wind Turbine [Volume 7, Issue 3, 2021, Pages 1276-1282]
  • Khodadadi, Touraj‎ Numerical Simulation of Fuzzy Volterra Integro-differential ‎Equation using Improved Runge-Kutta Method [Volume 9, Issue 1, 2023, Pages 72-82]
  • Khojasteh Manesh, Masoud Numerical Investigation of the Effect of Bubble-Bubble Interaction on the Power of Propagated Pressure Waves [Volume 5, Issue 2, 2019, Pages 181-191]
  • Khorashadizadeh, Mojtaba Mesoscopic Simulation of Forced Convective Heat Transfer of Carreau-Yasuda Fluid Flow over an Inclined Square: Temperature-dependent Viscosity [Volume 6, Issue 2, 2020, Pages 307-319]
  • Khoroshilov, Valeriy Analysis of Possibilities to Use Predictive Mathematical Models ‎for Studying the Dam Deformation State [Volume 8, Issue 2, 2022, Pages 733-744]
  • Khunkitti, Pirat Design of Doubly Salient Permanent Magnet Generator for ‎Output Power Enhancement using Structural Modification [Volume 7, Issue 4, 2021, Pages 2171-2178]
  • Khurana, Ekanshu Computational Fluid Dynamic Analysis of Amphibious Unmanned Aerial Vehicle [Volume 8, Issue 2, 2022, Pages 475-484]
  • Khurana, Meenakshi Magneto-bio-thermal Convection in Rotating Nanoliquid ‎containing Gyrotactic Microorganism [Volume 7, Issue 4, 2021, Pages 1973-1986]
  • Khute, Sahadasan Computational Fluid Dynamic Analysis of Amphibious Unmanned Aerial Vehicle [Volume 8, Issue 2, 2022, Pages 475-484]
  • Kiarasi, Faraz Numerical and Experimental Investigation on Post-buckling ‎Behavior of Stiffened Cylindrical Shells with Cutout subject to ‎Uniform Axial Compression [Volume 9, Issue 1, 2023, Pages 25-44]
  • Kim Thoa, Nguyen Thi Nonlinear Vibration of an Electrostatically Actuated ‎Functionally Graded Microbeam under Longitudinal Magnetic ‎Field [Volume 7, Issue 3, 2021, Pages 1537-1549]
  • Kirilova, Elisaveta Two-dimensional Stress and strain Analysis for Graphene-‎polymer Nanocomposite under Axial Load [Volume 8, Issue 3, 2022, Pages 1065-1075]
  • Kirinus, Eduardo de Paula WaveMIMO Methodology: Numerical Wave Generation of a ‎Realistic Sea State‎ [Volume 7, Issue 4, 2021, Pages 2129-2148]
  • Kiselev, Dmitry E. Impact-enhanced Electrostatic Vibration Energy Harvester [Volume 8, Issue 2, 2022, Pages 671-683]
  • Kittichaikarn, Chawalit A Study of Curved Louver Fin Configuration for ‎Heat Transfer Enhancement [Volume 8, Issue 2, 2022, Pages 754-763]
  • Kobeleva, Natalia Analysis of Possibilities to Use Predictive Mathematical Models ‎for Studying the Dam Deformation State [Volume 8, Issue 2, 2022, Pages 733-744]
  • Kocsis Szürke, Szabolcs Numerical Optimization of Battery Heat Management of Electric Vehicles [Volume 9, Issue 4, 2023, Pages 1076-1092]
  • Koguchi, Hideo Singular Stresses at a Vertex and Along a Singular Line in Three-‎dimensional Piezoelectric Bonded Joints [Volume 6, Special Issue, 2020, Pages 1364-1370]
  • Kolahchi, Reza Analytical bending solution of fully clamped orthotropic rectangular plates resting on elastic foundations by the finite integral transform method [Volume 1, Issue 2, 2015, Pages 52-58]
  • Konstantinov, Aleksandr The Direct Impact Method for Studying Dynamic Behavior of ‎Viscoplastic Materials [Volume 8, Issue 2, 2022, Pages 597-604]
  • Koochi, Ali Scale-Dependent Dynamic Behavior of Nanowire-Based Sensor in Accelerating Field [Volume 5, Issue 2, 2019, Pages 486-497]
  • Kopp, Michael I. The Impact of Marangoni Convection and Radiation on Flow of ‎Ternary Nanofluid in a Porous Medium with Mass Transpiration [Volume 9, Issue 2, 2023, Pages 487-497]
  • Korolev, Stanislav A. Prediction of the Supersonic Flow Base Pressure by Axisymmetric ‎Direct Numerical Simulation [Volume 9, Issue 3, 2023, Pages 739-748]
  • Kostazos, Protesilaos Numerical Analysis of the Deformation of a Shearing Machine ‎Tool under Excessive Blade Clearance [Volume 7, Issue 2, 2021, Pages 496-504]
  • Kou, Lei Studying the Strengthening Effect of Railway Ballast in the ‎Direct Shear Test due to Insertion of Middle-size Ballast Particles [Volume 8, Issue 4, 2022, Pages 1387-1397]
  • Kouloughli, Imén Reducing Retrieval Time in Automated Storage and Retrieval System with a Gravitational Conveyor Based on Multi-Agent Systems [Volume 4, Issue 1, 2018, Pages 55-68]
  • KÖTEN, Hasan Mixed Convection Heat Transfer and Entropy Generation in a ‎Water-filled Square Cavity Partially Heated from Below: The ‎Effects of Richardson and Prandtl Numbers [Volume 8, Issue 1, 2022, Pages 282-297]
  • Kovács, Gábor Numerical Optimization of Battery Heat Management of Electric Vehicles [Volume 9, Issue 4, 2023, Pages 1076-1092]
  • Kozachenko, Tetiana Rotations of a Rigid Body Close to the Lagrange Case under the ‎Action of Nonstationary Perturbation Torque [Volume 8, Issue 3, 2022, Pages 1023-1031]
  • Krishnamoorthy, Gautham Accelerating the Convergence of Multiphase Flow Simulations ‎when Employing Non-Uniform Structured Grids [Volume 7, Issue 1, 2021, Pages 235-253]
  • Krishnaprasad, K. Numerical Modeling and Multi Objective Optimization of Face Milling of AISI 304 Steel [Volume 5, Issue 4, 2019, Pages 749-762]
  • Krommer, Michael Structural Health Monitoring of Multi-Storey Frame Structures using Piezoelectric Incompatibility Filters: Theory and Numerical Verification [Volume 7, Special Issue, 2021, Pages 1138-1157]
  • Kudenatti, Ramesh B. Numerical Study of Three-dimensional Boundary-layer Flow over ‎a Wedge: Magnetic Field Analysis [Volume 8, Issue 3, 2022, Pages 876-890]
  • Kuharat, Sireetorn Non-similar Radiative Bioconvection Nanofluid Flow under ‎Oblique Magnetic Field with Entropy Generation‎ [Volume 8, Issue 1, 2022, Pages 206-218]
  • Kumar, A. Vanav Theoretical Study on Poiseuille Flow of Herschel-Bulkley Fluid in ‎Porous Media‎ [Volume 8, Issue 4, 2022, Pages 1246-1269]
  • Kumar, Bharath Unsteady Hydromagnetic Flow of Eyring-Powell Nanofluid over an Inclined Permeable Stretching Sheet with Joule Heating and Thermal Radiation [Volume 6, Issue 2, 2020, Pages 259-270]
  • Kumar, Manoj Comparative Study of Mixed Convective MHD Cu-Water Nanofluid Flow over a Cone and Wedge using Modified Buongiorno’s Model in Presence of Thermal Radiation and Chemical Reaction via Cattaneo-Christov Double Diffusion Model [Volume 7, Issue 3, 2021, Pages 1383-1402]
  • Kumar, P. Entropy Analysis of Darcy-Forchheimer Model of Prandtl Nanofluid over a Curved Stretching Sheet and Heat Transfer Optimization by ANOVA-Taguchi Technique [Volume 10, Issue 2, 2024, Pages 287-303]
  • Kumar, Parthi Vijaya A Study on Effects of Thermal Radiative Dissipative MHD Non-Newtonian Nanofluid above an Elongating Sheet in Porous Medium [Volume 9, Issue 4, 2023, Pages 945-954]
  • Kumar, Rajesh Thermoelastic Modeling with Dual Porosity Interacting with an Inviscid Liquid [Volume 10, Issue 1, 2024, Pages 111-124]
  • Kumar, Sachin Numerical Solution of Caputo-Fabrizio Time Fractional Distributed Order Reaction-diffusion Equation via Quasi Wavelet based Numerical Method [Volume 6, Issue 4, 2020, Pages 848-861]
  • Kumar, Sachin Numerical Solution of the Time Fractional Reaction-advection-diffusion Equation in Porous Media [Volume 8, Issue 1, 2022, Pages 84-96]
  • Kumar, Sumit Sweep Blade Design for an Axial Wind Turbine using a Surrogate-‎assisted Differential Evolution Algorithm [Volume 9, Issue 1, 2023, Pages 217-225]
  • Kumhar, Raju Modelling of Love Waves in Fluid Saturated Porous Viscoelastic Medium resting over an Exponentially Graded Inhomogeneous Half-space Influenced by Gravity [Volume 6, Issue 3, 2020, Pages 517-530]
  • Kundu, Balaram Finite Integral Transform Based Solution of Second Grade Fluid Flow between Two Parallel Plates [Volume 5, Issue 5, 2019, Pages 989-997]
  • Kundu, Prabir Kumar Entropy Generation of Variable Viscosity and Thermal Radiation on Magneto Nanofluid Flow with Dusty Fluid [Volume 6, Issue 1, 2020, Pages 171-182]
  • Kundu, Prabir Kumar Impact of Microbial Activity and Stratification Phenomena on Generating/Absorbing Sutterby Nanofluid over a Darcy Porous Medium [Volume 9, Issue 3, 2023, Pages 804-819]
  • Kundu, Santimoy Love Wave Propagation in a Fiber-reinforced Layer with Corrugated Boundaries Overlying Heterogeneous Half-space [Volume 5, Issue 5, 2019, Pages 926-934]
  • Kundu, Santimoy Modelling of Love Waves in Fluid Saturated Porous Viscoelastic Medium resting over an Exponentially Graded Inhomogeneous Half-space Influenced by Gravity [Volume 6, Issue 3, 2020, Pages 517-530]
  • Kuprikov, Mikhail Yu. Moment-Inertial Factor as a Criterion for Assessing the ‎Dimension of an Aircraft [Volume 8, Issue 4, 2022, Pages 1307-1314]
  • Kuprikov, Nikita M. Moment-Inertial Factor as a Criterion for Assessing the ‎Dimension of an Aircraft [Volume 8, Issue 4, 2022, Pages 1307-1314]
  • Kurgan, Naci The Relations between the Various Critical Temperatures of Thin ‎FGM Plates [Volume 6, Special Issue, 2020, Pages 1404-1419]
  • Kurhan, Dmytro Modeling of the Dynamic Rail Deflection using Elastic Wave Propagation [Volume 8, Issue 1, 2022, Pages 379-387]
  • Kurpa, Lidiya Analysis of Free Vibration of Porous Power-law and Sigmoid Functionally Graded Sandwich Plates by the R-functions Method [Volume 9, Issue 4, 2023, Pages 1144-1155]
  • Kwon, MInho Forced-based Shear-flexure-interaction Frame Element for Nonlinear Analysis of Non-ductile Reinforced Concrete Columns [Volume 6, Special Issue, 2020, Pages 1151-1167]
  • Kwon, MInho Nonlinear Winkler-based Frame Element with Inclusion of Shear-Flexure Interaction Effect for Analysis of Non-Ductile RC Members on Foundation [Volume 7, Issue 1, 2021, Pages 148-164]

L

  • Laghari, Muzaffar Hussain Application of Atangana-Baleanu Fractional Derivative to ‎Carbon Nanotubes Based Non-Newtonian Nanofluid: ‎Applications in Nanotechnology [Volume 6, Special Issue, 2020, Pages 1260-1269]
  • Lagziri, Hajar Convective Instability in Forchheimer-Prats Configuration with a Saturating Power-Law Fluid [Volume 10, Issue 2, 2024, Pages 357-368]
  • Lahlaouti, Mohammed Lhassane Convective Instability in Forchheimer-Prats Configuration with a Saturating Power-Law Fluid [Volume 10, Issue 2, 2024, Pages 357-368]
  • Lakhi, Mohammad Designing and Creating a Mouse Using Nature-Inspired Shapes [Volume 6, Issue 4, 2020, Pages 841-847]
  • Lakhi, Mohammad Evaluating the Delamination in the Drilling Process of a Melamine Coated Medium Density Fiberboard (MDF) [Volume 8, Issue 1, 2022, Pages 1-10]
  • Lakrad, Faouzi Nonlinear Biodynamic Models of the Hand-arm System and ‎Parameters Identification using the Vibration Transmissibility or ‎the Driving-point Mechanical Impedance [Volume 7, Issue 2, 2021, Pages 944-955]
  • Lal, Achchhe Numerical Analysis of an Edge Crack Isotropic Plate with Void/Inclusions under Different Loading by Implementing XFEM [Volume 7, Issue 3, 2021, Pages 1362-1382]
  • Lalu, Octavian The Permutation Entropy and its Applications on Fire Tests Data [Volume 6, Special Issue, 2020, Pages 1380-1393]
  • Lamba, Navneet Kumar Thermoelastic Analysis of Functionally Graded Hollow Cylinder Subjected to Uniform Temperature Field [Volume 2, Issue 2, 2016, Pages 118-127]
  • Lamba, Navneet Kumar Impact of Memory-dependent Response of a Thermoelastic Thick Solid Cylinder [Volume 9, Issue 4, 2023, Pages 1135-1143]
  • Lamba, N. K. Springbackward Phenomenon of a Transversely Isotropic Functionally Graded Composite Cylindrical Shell [Volume 2, Issue 3, 2016, Pages 134-143]
  • La Regina, Rosario Multibody Modeling and Nonlinear Control of a Pantograph Scissor Lift Mechanism [Volume 9, Issue 1, 2023, Pages 129-167]
  • Latha, D.N. Non-similar Solutions of MHD Mixed Convection over an Exponentially Stretching Surface: Influence of Non-uniform Heat Source or Sink [Volume 7, Issue 3, 2021, Pages 1334-1347]
  • Latief, Fourier D.E. Two-Solid Deposition in Fluid Column using Immersed ‎Boundary-Lattice Boltzmann Method [Volume 7, Issue 3, 2021, Pages 1814-1825]
  • Lavimi, Roham An Experimental Comparison between Wing Root and Wingtip ‎Corrugation Patterns of Dragonfly Wing at Ultra-low Reynolds ‎Number and High Angles of Attack‎ [Volume 8, Issue 4, 2022, Pages 1176-1185]
  • Layek, G.C. Dufour and Soret Effects on Unsteady Heat and Mass Transfer for Powell-Eyring Fluid Flow over an Expanding Permeable Sheet [Volume 6, Issue 4, 2020, Pages 985-998]
  • Le, Ngoc Ly An Analytical Approach of Nonlinear Thermo-mechanical Buckling of Functionally Graded Graphene-reinforced Composite Laminated Cylindrical Shells under Compressive Axial Load Surrounded by Elastic Foundation [Volume 6, Issue 2, 2020, Pages 357-372]
  • Le, Pham Binh Free Vibration Analysis of Functionally Graded Porous Nano-‎plates with Different Shapes Resting on Elastic Foundation [Volume 7, Issue 3, 2021, Pages 1593-1605]
  • Lee, Changwoo Dynamic Investigation of Non-linear Behavior of Hydraulic Cylinder in Mold Oscillator using PID Control Process [Volume 7, Issue 1, 2021, Pages 270-276]
  • Lee, Jer Vui Thermomechanical Stresses of Multilayered Wellbore Structure ‎of Underground Hydrogen Storage – A Simplified Solution Based ‎on Recursive Algorithm [Volume 8, Issue 4, 2022, Pages 1287-1298]
  • Lee, T. S. Robust P-H∞ Integrated Controller for Flexible Link Manipulator ‎System in the Presence of Disturbance [Volume 7, Issue 2, 2021, Pages 646-654]
  • Lei, Hou Analytical Solution of Linear, Quadratic and Cubic Model of PTT Fluid [Volume 1, Issue 4, 2015, Pages 220-228]
  • Lei, Ying A Generalized Identification of Joint Structural State and ‎Unknown Inputs Using Data Fusion MKF-UI [Volume 7, Special Issue, 2021, Pages 1198-1204]
  • Lei, Yongjun Semi-Analytical Solution for Vibration of Nonlocal Piezoelectric Kirchhoff Plates Resting on Viscoelastic Foundation [Volume 4, Issue 3, 2018, Pages 202-215]
  • Lenci, Stefano Natural frequencies and internal resonance of beams with arbitrarily distributed axial loads [Volume 7, Special Issue, 2021, Pages 1009-1019]
  • Leonelli, Luca Driveline Stability in Racing Motorcycles: Analysis of a Three ‎Degrees of Freedom Minimal Model [Volume 9, Issue 2, 2023, Pages 404-418]
  • Leon-Medina, Jersson X. Manifold Learning Algorithms Applied to Structural Damage ‎Classification [Volume 7, Special Issue, 2021, Pages 1158-1166]
  • Leshchenko, Dmytro Rotations of a Rigid Body Close to the Lagrange Case under the ‎Action of Nonstationary Perturbation Torque [Volume 8, Issue 3, 2022, Pages 1023-1031]
  • Leshchenko, Dmytro Exact Solutions for Isobaric Inhomogeneous Couette Flows of a ‎Vertically Swirling Fluid [Volume 9, Issue 2, 2023, Pages 521-528]
  • Leshchenko, Dmytro Inhomogeneous Gradient Poiseuille Flows of a Vertically Swirled Fluid [Volume 10, Issue 1, 2024, Pages 1-12]
  • Le-Tran, Nhat An 8-Node Solid-Shell Finite Element based on Assumed Bending ‎Strains and Cell-Based Smoothed Membrane Strains for Static Analysis of Plates and Shells [Volume 6, Special Issue, 2020, Pages 1335-1347]
  • Lettieri, Antonio A General Multibody Approach for the Linear and Nonlinear Stability Analysis of Bicycle Systems. Part I: Methods of Constrained Dynamics [Volume 7, Issue 2, 2021, Pages 655-670]
  • Lettieri, Antonio A General Multibody Approach for the Linear and Nonlinear Stability Analysis of Bicycle Systems. Part II: Application to the Whipple-Carvallo Bicycle Model [Volume 7, Issue 2, 2021, Pages 671-700]
  • Levskii, Mikhail Valer’evich Application of Complex Functional of Quality in Optimal Control ‎of Spacecraft Motion [Volume 7, Issue 1, 2021, Pages 262-269]
  • Lewis, Roland W. Unsteady MHD Mixed Convection Flow of Water over a Sphere ‎with Mass Transfer [Volume 7, Issue 2, 2021, Pages 935-943]
  • Li, Feng Fatigue Life Analysis of Bus Body based on User Target Load Spectrum‎ [Volume 7, Issue 2, 2021, Pages 965-969]
  • Li, Guangning Laminar Flow Control and Drag Reduction using Biomimetically ‎Inspired Forward Facing Steps [Volume 7, Issue 2, 2021, Pages 752-763]
  • Li, Qiliang A Review of Recent Studies on Simulations for Flow around High-Speed Trains [Volume 5, Issue 2, 2019, Pages 311-333]
  • Li, Tian A Review of Recent Studies on Simulations for Flow around High-Speed Trains [Volume 5, Issue 2, 2019, Pages 311-333]
  • Li, Weibao Design of Cooling Water System (CWS) for CRAFT Lower Hybrid ‎Current Driven (LHCD) System‎ [Volume 7, Issue 2, 2021, Pages 470-477]
  • Li, Xiaochuan Study of the Vibration Characteristics of SA 330 Helicopter Planetary Main Gearbox [Volume 9, Issue 4, 2023, Pages 1093-1106]
  • Li, Xiaolin Fatigue Life Analysis of Bus Body based on User Target Load Spectrum‎ [Volume 7, Issue 2, 2021, Pages 965-969]
  • Li, Xuefeng Finite Element Solutions of Cantilever and Fixed Actuator Beams Using Augmented Lagrangian Methods [Volume 4, Issue 2, 2018, Pages 125-132]
  • Li, Xuefeng A General Purpose Variational Formulation for Boundary Value Problems of Orders Greater than Two [Volume 7, Issue 3, 2021, Pages 1788-1802]
  • Li, Yueming An Exact Analytical Solution for Heat Conduction in a ‎Functionally Graded Conical Shell [Volume 9, Issue 2, 2023, Pages 302-317]
  • Liao, I-Ting Unsteady Meshfree Framework for Double-diffusive Natural Convection with Boundary and Geometry Effects [Volume 10, Issue 2, 2024, Pages 272-286]
  • Liguori, Aurelio Sizing the Actuators for a Dragon Fly Prototype [Volume 10, Issue 1, 2024, Pages 152-163]
  • Limkatanyu, Suchart Forced-based Shear-flexure-interaction Frame Element for Nonlinear Analysis of Non-ductile Reinforced Concrete Columns [Volume 6, Special Issue, 2020, Pages 1151-1167]
  • Limkatanyu, Suchart Nonlinear Winkler-based Frame Element with Inclusion of Shear-Flexure Interaction Effect for Analysis of Non-Ductile RC Members on Foundation [Volume 7, Issue 1, 2021, Pages 148-164]
  • Limkatanyu, Suchart Shear-flexure Interaction Frame Model on Kerr-type Foundation ‎for Analysis of Non-ductile RC Members on Foundation [Volume 8, Issue 3, 2022, Pages 1076-1090]
  • Linh, Nguyen Ngoc Weighted Dual Approach to an Equivalent Stiffness-based Load ‎Transfer Model for Jacked Open-ended Pile [Volume 7, Issue 3, 2021, Pages 1751-1763]
  • Lipanov, Alexey M. Prediction of the Supersonic Flow Base Pressure by Axisymmetric ‎Direct Numerical Simulation [Volume 9, Issue 3, 2023, Pages 739-748]
  • Lippiello, Maria Variational Derivation of Truncated Timoshenko-Ehrenfest Beam Theory [Volume 8, Issue 3, 2022, Pages 996-1004]
  • Liu, Bai-Nian Variational Principles and Solitary Wave Solutions of Generalized ‎Nonlinear Schrödinger Equation in the Ocean [Volume 7, Issue 3, 2021, Pages 1639-1648]
  • Liu, Hongjun A Fractal Rheological Model for SiC Paste using a Fractal Derivative [Volume 7, Issue 1, 2021, Pages 13-18]
  • Liu, Jianxing Studying the Strengthening Effect of Railway Ballast in the ‎Direct Shear Test due to Insertion of Middle-size Ballast Particles [Volume 8, Issue 4, 2022, Pages 1387-1397]
  • Liu, Jianxing Numerical Optimization of Battery Heat Management of Electric Vehicles [Volume 9, Issue 4, 2023, Pages 1076-1092]
  • Liu, Lijun A Generalized Identification of Joint Structural State and ‎Unknown Inputs Using Data Fusion MKF-UI [Volume 7, Special Issue, 2021, Pages 1198-1204]
  • Liu, Meng-Zhu Variational Principles for Two Compound Nonlinear Equations ‎with Variable Coefficients [Volume 7, Issue 2, 2021, Pages 415-421]
  • Liu, Meng-Zhu Variational Principles and Solitary Wave Solutions of Generalized ‎Nonlinear Schrödinger Equation in the Ocean [Volume 7, Issue 3, 2021, Pages 1639-1648]
  • Liu, Zhe Design of Cooling Water System (CWS) for CRAFT Lower Hybrid ‎Current Driven (LHCD) System‎ [Volume 7, Issue 2, 2021, Pages 470-477]
  • Liu, Zhiye Studying the Strengthening Effect of Railway Ballast in the ‎Direct Shear Test due to Insertion of Middle-size Ballast Particles [Volume 8, Issue 4, 2022, Pages 1387-1397]
  • Loghman, Abbas Magnetic Field Effects on the Elastic Behavior of Polymeric Piezoelectric Cylinder Reinforced with CNTs [Volume 2, Issue 4, 2016, Pages 222-229]
  • Lok, Sefika Ipek A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part I: Analytical Methods and Computational Algorithms [Volume 9, Issue 2, 2023, Pages 529-549]
  • Lok, Sefika Ipek A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part II: Numerical Analysis and Experimental Testing [Volume 9, Issue 2, 2023, Pages 550-589]
  • Lomunov, Andrey K. Investigation of Wood Properties at Elevated Temperature [Volume 8, Issue 1, 2022, Pages 298-305]
  • Lorenzini, Giulio Numerical Investigation on Flow Transition through a Curved ‎Square Duct with Negative Rotation [Volume 7, Issue 3, 2021, Pages 1435-1447]
  • Lorenzini, Giulio A Study on Effects of Thermal Radiative Dissipative MHD Non-Newtonian Nanofluid above an Elongating Sheet in Porous Medium [Volume 9, Issue 4, 2023, Pages 945-954]
  • Lorenzini, Giulio Magnetic Field Influence on Thermophoretic Micropolar Fluid Flow over an Inclined Permeable Surface: A Numerical Study [Volume 10, Issue 2, 2024, Pages 369-382]
  • Löser, Enrique Eduardo Self-damping of Optical Ground Wire‎ Cables: A Bayesian Approach [Volume 9, Issue 1, 2023, Pages 205-216]
  • Lourenço, Rodrigo Francisco Borges Analysis and Recognition of Standards in Intelligent Hybrid ‎Systems using Natural Computing [Volume 7, Issue 3, 2021, Pages 1764-1773]
  • Lu, Yiling Computational Analysis of Turbulent Flow over a Bluff Body with ‎Drag Reduction Devices [Volume 6, Special Issue, 2020, Pages 1210-1219]
  • Lu, Yiling Assessment of Drag Reduction Devices Mounted on a Simplified ‎Tractor-Trailer Truck Model [Volume 7, Issue 1, 2021, Pages 45-53]
  • Lu, Yiling Computational Study of Flow around 2D and 3D Tandem Bluff Bodies [Volume 7, Issue 2, 2021, Pages 528-534]
  • Luangarpa, Chonlada Singular Stresses at a Vertex and Along a Singular Line in Three-‎dimensional Piezoelectric Bonded Joints [Volume 6, Special Issue, 2020, Pages 1364-1370]
  • Luciano, Raimondo Linear dynamic response of nanobeams accounting for higher gradient effects [Volume 2, Issue 2, 2016, Pages 54-64]
  • Luciano, Raimondo Axial and Torsional Free Vibrations of Elastic Nano-Beams by Stress-Driven Two-Phase Elasticity [Volume 5, Issue 2, 2019, Pages 402-413]
  • Lukin, Alexei Hemispherical Resonator of a Rate-integrating Gyroscope: A ‎Novel Method for Determination of Eigenfrequencies and ‎Eigenforms in Presence of Imperfections‎ [Volume 9, Issue 4, 2023, Pages 915-925]
  • Lund, Alana Variational Inference for Nonlinear Structural ‎Identification [Volume 7, Special Issue, 2021, Pages 1218-1231]
  • Luo, Robert Keqi Multimode Fatigue Criteria for Filled Non-crystalizing Rubber ‎under Positive R Ratios [Volume 9, Issue 4, 2023, Pages 1049-1059]
  • Luong, Viet Dung Finite Element and Experimental Investigation on the Effect of ‎Repetitive Shock in Corrugated Cardboard Packaging [Volume 7, Issue 2, 2021, Pages 820-830]
  • Luongo, Angelo Modeling beam-like planar structures by a one-dimensional continuum: an analytical-numerical method [Volume 7, Special Issue, 2021, Pages 1020-1033]
  • Luongo, Angelo Nonlinear dynamics and stability of a homogeneous model of tall buildings under resonant action [Volume 7, Special Issue, 2021, Pages 1034-1048]
  • Luongo, Angelo Flexural-Torsional Galloping of Prismatic Structures with Double-Symmetric Cross-Section [Volume 7, Special Issue, 2021, Pages 1049-1069]
  • Luongo, Angelo Editorial [Volume 7, Special Issue, 2021]
  • Lyashuk, Oleg The Dynamics of the Working Body of the Tubular Conveyor with ‎the Chain Drive [Volume 7, Issue 3, 2021, Pages 1710-1718]

M

  • Ma, Zhibo Verification and Validation of Common Derivative Terms Approximation in Meshfree Numerical Scheme [Volume 4, Issue 3, 2018, Pages 231-244]
  • Maani Miandoab, Ehsan Size Effect Impact on the Mechanical Behavior of an Electrically Actuated Polysilicon Nanobeam based NEMS Resonator [Volume 3, Issue 2, 2017, Pages 135-143]
  • Mabrouk, Samah M. Monitoring Dynamical Behavior and Optical Solutions of Space-Time Fractional Order Double-Chain Deoxyribonucleic Acid Model Considering the Atangana’s Conformable Derivative [Volume 10, Issue 2, 2024, Pages 383-391]
  • Macêdo, Emanuel Negrão Analysis of Particulate Systems with Numerical Inverse Laplace Transform [Volume 9, Issue 4, 2023, Pages 926-934]
  • Macêdo, Emanuel N. Hybrid Solution for the Analysis of MHD Micropolar Fluid Flow in a Vertical Porous Parallel-Plates Duct [Volume 6, Special Issue, 2020, Pages 1107-1124]
  • Macêdo, Emanuel N. Parameter Estimation in Population Balance through Bayesian ‎Technique Markov Chain Monte Carlo [Volume 7, Issue 2, 2021, Pages 890-901]
  • Machado, Bianca Neves WaveMIMO Methodology: Numerical Wave Generation of a ‎Realistic Sea State‎ [Volume 7, Issue 4, 2021, Pages 2129-2148]
  • Madhavi, Santhosh Polymeric Dissipative Convection Flow from an Inclined Plane with Chemical Reaction: Numerical Study [Volume 8, Issue 2, 2022, Pages 416-428]
  • Madoliat, Reza A Note on Free Vibration of a Double-beam System with Nonlinear Elastic Inner Layer [Volume 5, Issue 1, 2019, Pages 174-180]
  • Magodora, Mangwiro Effect of Cattaneo-Christov Heat Flux on Radiative ‎Hydromagnetic Nanofluid Flow between Parallel Plates using ‎Spectral Quasilinearization Method [Volume 8, Issue 3, 2022, Pages 865-875]
  • Mahabaleshwar, Ulavathi S. The Impact of Marangoni Convection and Radiation on Flow of ‎Ternary Nanofluid in a Porous Medium with Mass Transpiration [Volume 9, Issue 2, 2023, Pages 487-497]
  • Mahdavi, Mohammad Hadi Prediction of Entrance Length for Magnetohydrodynamics Channels Flow using Numerical simulation and Artificial Neural Network [Volume 6, Issue 3, 2020, Pages 582-592]
  • Mahdavian, Mohammad Electrochemical and Mechanical Properties of Ni/g-C3N4 ‎Nanocomposite Coatings with Enhanced Corrosion Protective ‎Properties: A Case Study for Modeling the Corrosion Resistance ‎by ANN and ANFIS Models [Volume 9, Issue 3, 2023, Pages 590-606]
  • Mahdi, Miralam Investigation the effects of injection pressure and compressibility and nozzle entry in diesel injector nozzle’s flow [Volume 1, Issue 2, 2015, Pages 83-94]
  • Mahdi, Miralam Numerical Investigation of the Effect of Bubble-Bubble Interaction on the Power of Propagated Pressure Waves [Volume 5, Issue 2, 2019, Pages 181-191]
  • Maheedhara Reddy, G. Experimental Investigation on Radial Ball Bearing Parameters Using Taguchi Method [Volume 4, Issue 1, 2018, Pages 69-74]
  • Mahmood, Lubna Smart Gas Sensors: Materials, Technologies, Practical ‎Applications, and Use of Machine Learning – A Review [Volume 9, Issue 3, 2023, Pages 775-803]
  • Mahmoodi, Masoud A Hybrid SVM-RVM Algorithm to Mechanical Properties in the Friction Stir Welding Process [Volume 8, Issue 1, 2022, Pages 36-47]
  • Mahmoud, Tarek A. Behavior of Nanofluid with Variable Brownian and Thermal ‎Diffusion Coefficients Adjacent to a Moving Vertical Plate [Volume 7, Issue 3, 2021, Pages 1466-1479]
  • Mahmoudi, Aicha A New Quantum-computing-based Algorithm for Robotic Arms ‎and Rigid Bodies’ Orientation [Volume 7, Issue 3, 2021, Pages 1836-1846]
  • Mahmoudi, Jafar CFD Analyses and Comparison of the Effect of Industrial Heat ‎Sinks in Subsea Control System (SCS)‎ [Volume 9, Issue 1, 2023, Pages 95-112]
  • Mahmoudi, Yousra A New Quantum-computing-based Algorithm for Robotic Arms ‎and Rigid Bodies’ Orientation [Volume 7, Issue 3, 2021, Pages 1836-1846]
  • Mahpeykar, Mohammad Reza Performance Investigation of Simple Low-dissipation AUSM ‎‎(SLAU) Scheme in Modeling of 2-D Inviscid Flow in Steam ‎Turbine Cascade Blades [Volume 9, Issue 2, 2023, Pages 332-345]
  • Mahsud, Yasir Electro-magneto-hydrodynamics Flows of Burgers' Fluids in Cylindrical Domains with Time Exponential Memory [Volume 5, Issue 4, 2019, Pages 577-591]
  • Majeed Jasim‎, Abeer New Analytical Study for Nanofluid between Two Non-Parallel ‎Plane Walls (Jeffery-Hamel Flow)‎ [Volume 7, Issue 1, 2021, Pages 213-224]
  • Majid, Dayang L. Impacts of Volume of Carbon Nanotubes on Bending for Carbon-‎Kevlar Hybrid Fabrics [Volume 7, Issue 2, 2021, Pages 839-848]
  • Makinde, O D Effect of Exponentially Variable Viscosity and Permeability on Blasius Flow of Carreau Nano Fluid over an Electromagnetic Plate through a Porous Medium [Volume 5, Issue 2, 2019, Pages 390-401]
  • Makinde, O.D. Irreversibility Analysis of MHD Buoyancy-Driven Variable Viscosity Liquid Film along an Inclined Heated Plate Convective Cooling [Volume 5, Issue 5, 2019, Pages 840-848]
  • Makinde, O.D. A Note on the Hydromagnetic Blasius Flow with Variable Thermal Conductivity [Volume 7, Issue 4, 2021, Pages 1925-1930]
  • Makinde, Oluwole Daniel Study of MHD Second Grade Flow through a Porous Microchannel under the Dual-Phase-Lag Heat and Mass Transfer Model [Volume 5, Issue 4, 2019, Pages 763-778]
  • Makinde, Oluwole Daniel Effect of Chemical Reaction on Bioconvective Flow in Oxytactic Microorganisms Suspended Porous Cavity [Volume 6, Issue 3, 2020, Pages 653-664]
  • Makinde, Oluwole Daniel Entropy Analysis of a Radiating Magnetic Liquid Film along a Slippery Inclined Heated Surface with Convective Cooling [Volume 6, Special Issue, 2020, Pages 1141-1150]
  • Malek-Mohammadi, Hosein Buckling and Vibration Analysis of a Double-layer Graphene ‎Sheet Coupled with a Piezoelectric Nanoplate [Volume 8, Issue 1, 2022, Pages 129-143]
  • Malekzadeh, Mohammad Improvement of Numerical Manifold Method using Nine-node ‎Quadrilateral and Ten-node Triangular Elements along with ‎Complex Fourier RBFs in Modeling Free and Forced Vibrations [Volume 7, Issue 4, 2021, Pages 2049-2063]
  • Malekzadeh, Parviz Investigating the Effects of Air Duct Dimensions on Aeration and Hydrodynamic Characteristics of a Surface-piercing Propeller [Volume 10, Issue 2, 2024, Pages 392-405]
  • Malekzadeh Fard, K. Low Velocity Impact Response of Laminated Composite Truncated Sandwich Conical Shells with Various Boundary Conditions Using Complete Model and GDQ Method [Volume 3, Issue 1, 2017, Pages 1-15]
  • Malekzadeh Fard, Keramat Buckling and Postbuckling of Concentrically Stiffened Piezo-Composite Plates on Elastic Foundations [Volume 5, Issue 1, 2019, Pages 128-140]
  • Malekzadeh Fard, Keramat Buckling and Free Vibration Analysis of Fiber Metal-laminated Plates Resting on Partial Elastic Foundation [Volume 6, Issue 1, 2020, Pages 37-51]
  • Malekzadeh Fard, Keramat Optimization of the Prismatic Core Sandwich Panel under Buckling Load and Yield Stress Constraints using an Improved Constrained Differential Evolution Algorithm [Volume 6, Issue 4, 2020, Pages 920-933]
  • Malekzadeh Fard, Keramat Buckling and Vibration Analysis of a Double-layer Graphene ‎Sheet Coupled with a Piezoelectric Nanoplate [Volume 8, Issue 1, 2022, Pages 129-143]
  • Malikan, M. Thermal Buckling Analysis of Circular Bilayer Graphene Sheets Resting on an Elastic Matrix Based on Nonlocal Continuum Mechanics [Volume 7, Issue 4, 2021, Pages 1862-1877]
  • Malikan, Mohammad Analytical predictions for the buckling of a nanoplate subjected to non-uniform compression based on the four-variable plate theory [Volume 3, Issue 3, 2017, Pages 218-228]
  • Malikan, Mohammad Buckling Analysis of a Micro Composite Plate with Nano Coating Based on the Modified Couple Stress Theory [Volume 4, Issue 1, 2018, Pages 1-15]
  • Malikan, Mohammad Differential Quadrature Method for Dynamic Buckling of Graphene Sheet Coupled by a Viscoelastic Medium Using Neperian Frequency Based on Nonlocal Elasticity Theory [Volume 4, Issue 3, 2018, Pages 147-160]
  • Malikan, Mohammad On the Buckling Response of Axially Pressurized Nanotubes Based on a Novel Nonlocal Beam Theory [Volume 5, Issue 1, 2019, Pages 103-112]
  • Malikan, Mohammad A Novel Approach to Fully Nonlinear Mathematical Modeling of ‎Tectonic Plates [Volume 9, Issue 2, 2023, Pages 430-444]
  • Mallik, Arnab Kumar A Study of Model Separation Flow Behavior at High Angles of Attack Aerodynamics [Volume 4, Issue 4, 2018, Pages 318-330]
  • Malookani, Rajab A. Asymptotic Approximations of the Solution for a Traveling String under Boundary Damping [Volume 5, Issue 5, 2019, Pages 918-925]
  • Mamedova, Yegana Vahid Solution of the Problem of Analytical Construction of Optimal ‎Regulators for a Fractional Order Oscillatory System in the ‎General Case [Volume 7, Issue 2, 2021, Pages 970-976]
  • Manconi, Elisabetta Wave Motion and Stop-Bands in Pipes with Helical Characteristics Using Wave Finite Element Analysis [Volume 4, Special Issue: Applied and Computational Issues in Structural Engineering, 2018, Pages 420-428]
  • Mandal, B. Dufour and Soret Effects on Unsteady Heat and Mass Transfer for Powell-Eyring Fluid Flow over an Expanding Permeable Sheet [Volume 6, Issue 4, 2020, Pages 985-998]
  • Mandi, Anand Love Wave Propagation in a Fiber-reinforced Layer with Corrugated Boundaries Overlying Heterogeneous Half-space [Volume 5, Issue 5, 2019, Pages 926-934]
  • Manjunatha, G. Effects of Inclined Magnetic Field and Porous Medium on Peristaltic Flow of a Bingham Fluid with Heat Transfer [Volume 7, Issue 4, 2021, Pages 1892-1906]
  • Manjunatha, S. Theoretical Study of Convective Heat Transfer in Ternary ‎Nanofluid Flowing past a Stretching Sheet [Volume 8, Issue 4, 2022, Pages 1279-1286]
  • Manrique-Escobar, Camilo Andrés On the Analytical and Computational Methodologies for Modelling Two-wheeled Vehicles within the Multibody Dynamics Framework: A Systematic Literature Review [Volume 8, Issue 1, 2022, Pages 153-181]
  • Mantari, J.L. On Bending Response of Doubly Curved Laminated Composite Shells Using Hybrid Refined Models [Volume 5, Issue 5, 2019, Pages 875-899]
  • Mantari, J.L. Application of Breakage Models to Particle Speeds Simulated by Discrete Element Methods [Volume 10, Issue 2, 2024, Pages 245-259]
  • MANTARI, J.L. Evaluation of the Best New Cross-ply Laminated Plate Theories through the Axiomatic/Asymptotic Approach [Volume 4, Issue 4, 2018, Pages 331-351]
  • MANTARI, J.L. Generalized 2-Unknown’s HSDT to Study Isotropic and Orthotropic Composite Plates [Volume 5, Issue 1, 2019, Pages 141-149]
  • MANTARI, J.L. Bending and Free Vibration Analysis of Functionally Graded Plates via Optimized Non-polynomial Higher Order Theories [Volume 5, Issue 2, 2019, Pages 281-298]
  • Manthena, V. R. Springbackward Phenomenon of a Transversely Isotropic Functionally Graded Composite Cylindrical Shell [Volume 2, Issue 3, 2016, Pages 134-143]
  • Maraki, Mohammad Reza A Hybrid SVM-RVM Algorithm to Mechanical Properties in the Friction Stir Welding Process [Volume 8, Issue 1, 2022, Pages 36-47]
  • Maranna, Thippaiah The Impact of Marangoni Convection and Radiation on Flow of ‎Ternary Nanofluid in a Porous Medium with Mass Transpiration [Volume 9, Issue 2, 2023, Pages 487-497]
  • Marashi, Seyed Maziar Estimating the Mode Shapes of a Bridge Using Short Time Transmissibility Measurement from a Passing Vehicle [Volume 5, Issue 4, 2019, Pages 735-748]
  • Marinkovic, Dragan Editorial [Volume 6, Special Issue, 2020]
  • Marinkovic, Dragan Stress Mode Superposition for a Priori Detection of Highly ‎Stressed Areas: Mode Normalisation and Loading Influence [Volume 7, Issue 3, 2021, Pages 1698-1709]
  • Marotti de Sciarra, Francesco Linear dynamic response of nanobeams accounting for higher gradient effects [Volume 2, Issue 2, 2016, Pages 54-64]
  • Marotti de Sciarra, Francesco Axial and Torsional Free Vibrations of Elastic Nano-Beams by Stress-Driven Two-Phase Elasticity [Volume 5, Issue 2, 2019, Pages 402-413]
  • Marques, Eduardo Effect of Temperature and Moisture on the Impact Behaviour of ‎Adhesive Joints for the Automotive Industry [Volume 7, Issue 3, 2021, Pages 1488-1500]
  • Marques, Eduardo A.S. Mechanical Characterisation and Comparison of Hyperelastic ‎Adhesives: Modelling and Experimental Validation [Volume 8, Issue 1, 2022, Pages 359-369]
  • Marques, Eduardo A.S. Study of Hybrid Composite Joints with Thin-ply-reinforced Adherends under High-rate and Impact Loadings [Volume 10, Issue 2, 2024, Pages 260-271]
  • Mashayekhi, Mohammad Investigating the Ultrasonic Assistance in the Tube Hydroforming Process [Volume 3, Issue 3, 2017, Pages 178-184]
  • Mashayekhi, Mohammad Investigation on the Ultrasonic Tube Hydroforming in the Bulging Process Using Finite Element Method [Volume 3, Issue 4, 2017, Pages 251-257]
  • Mashinchi Joubari, Mohammad Mehdi Determination of Periodic Solution for Tapered Beams with Modified Iteration Perturbation Method [Volume 1, Issue 1, 2015, Pages 44-51]
  • Mashinchi Joubari, Mohammad Mehdi Solution of strongly nonlinear oscillator problem arising in Plasma Physics with Newton Harmonic Balance Method [Volume 1, Issue 2, 2015, Pages 59-66]
  • Masri, Sami F. On the Active Vibration Control of Nonlinear Uncertain Structures [Volume 7, Special Issue, 2021, Pages 1183-1197]
  • Massouh, Fawaz Numerical Investigation of an Unsteady and Anisotropic Turbulent ‎Flow Downstream a 90° Bend Pipe with and without Ribs [Volume 7, Issue 3, 2021, Pages 1620-1638]
  • Mastrone, Marco Nicola Numerical Modeling of Fluid’s Aeration: Analysis of the Power ‎Losses and Lubricant Distribution in Gearboxes [Volume 9, Issue 1, 2023, Pages 83-94]
  • Matoog, Rajaa. T The Rank Upgrading Technique for a Harmonic Restoring Force ‎of Nonlinear Oscillators [Volume 7, Issue 2, 2021, Pages 782-789]
  • Matouk, Ahmed Ezzat A Novel Fractional-Order System: Chaos, Hyperchaos and ‎Applications to Linear Control [Volume 7, Issue 2, 2021, Pages 701-714]
  • Mauludin, Luthfi Muhammad Cyclic and Monotonic Behavior of Strengthened and Unstrengthened Square Reinforced Concrete Columns [Volume 5, Special Issue: Computational Methods for Material Failure, 2019, Pages 517-525]
  • Mauludin, Luthfi Muhammad Modeling of Self-Healing Concrete: A Review [Volume 5, Special Issue: Computational Methods for Material Failure, 2019, Pages 526-539]
  • Mazlan, Norkhairunnisa Impacts of Volume of Carbon Nanotubes on Bending for Carbon-‎Kevlar Hybrid Fabrics [Volume 7, Issue 2, 2021, Pages 839-848]
  • Mba, David Study of the Vibration Characteristics of SA 330 Helicopter Planetary Main Gearbox [Volume 9, Issue 4, 2023, Pages 1093-1106]
  • Mechighel, Farid Thermal Behavior of Mesoporous Aramid Fiber Reinforced Silica Aerogel Composite for Thermal Insulation Applications: Microscale Modeling [Volume 10, Issue 1, 2024, Pages 140-151]
  • Medina, David A. A Nonlinear Lagrangian Model for Plane Frames Pre-design [Volume 9, Issue 3, 2023, Pages 884-899]
  • Meften, Ghazi A. Poiseuille Flow with Couple Stresses Effect and No-slip Boundary Conditions [Volume 6, Special Issue, 2020, Pages 1069-1083]
  • Megahid, S.F. A New Solution for the Classical Problem of a Rigid Body Motion ‎in a Liquid [Volume 7, Issue 4, 2021, Pages 2179-2184]
  • Mehdipour, Shahpoor Finite Element Analysis for CFST Columns under Blast Loading [Volume 3, Issue 4, 2017, Pages 283-292]
  • Mehdizadeh Khalsaraei, Mohammad Dynamically Consistent NSFD Methods for Predator-prey System [Volume 7, Issue 3, 2021, Pages 1565-1574]
  • Mehdizadeh Khalsaraei, Mohammad Nonstandard Dynamically Consistent Numerical Methods for ‎MSEIR Model [Volume 8, Issue 1, 2022, Pages 196-205]
  • Mehmood, Asrhad VIV Control Strategies Using Displacement-Based ‎Phenomenological Model [Volume 7, Special Issue, 2021, Pages 1090-1097]
  • Mehtiyev, Rafail Theory and Experiment in Predicting the Strength of Hybrid ‎Fiber Metal Laminates [Volume 9, Issue 4, 2023, Pages 987-999]
  • Mekonnen, Tariku Birabasa Uniformly Convergent Numerical Method for Two-parametric ‎Singularly Perturbed Parabolic Convection-diffusion Problems [Volume 7, Issue 2, 2021, Pages 535-545]
  • Melnikov, Andrey Stability Analysis of an Inflated, Axially Extended, Residually Stressed Circular Cylindrical Tube [Volume 9, Issue 3, 2023, Pages 834-847]
  • Meng, Guangwei Fatigue Life Analysis of Bus Body based on User Target Load Spectrum‎ [Volume 7, Issue 2, 2021, Pages 965-969]
  • Menni, Younes Analysis of Fluid Dynamics and Heat Transfer in a Rectangular Duct with Staggered Baffles [Volume 5, Issue 2, 2019, Pages 231-248]
  • Menni, Younes The Solar Air Channels: Comparative Analysis, Introduction of Arc-shaped Fins to Improve the Thermal Transfer [Volume 5, Issue 4, 2019, Pages 616-626]
  • Menni, Younes Fluid Flow and Heat Transfer over Staggered ꞌ+ꞌ Shaped Obstacles [Volume 6, Issue 4, 2020, Pages 741-756]
  • Menni, Younes Heating Capacity of an Earth to Air Heat Exchanger in Arid Regions - Experimental Investigation [Volume 8, Issue 2, 2022, Pages 429-437]
  • Menni, Younes Thermal-Aerodynamic Performance Measurement of Air Heat ‎Transfer Fluid Mechanics over S-shaped Fins in Shell-and-tube ‎Heat Exchangers [Volume 7, Issue 4, 2021, Pages 1931-1943]
  • Menni, Younes Hydrodynamic Behavior in Solar Oil Heat Exchanger Ducts Fitted ‎with Staggered Baffles and Fins [Volume 8, Issue 3, 2022, Pages 774-790]
  • MENNI, Younes A Review of Solar Energy Collectors: Models and Applications [Volume 4, Issue 4, 2018, Pages 375-401]
  • Mercan, Kadir Free Vibration of Annular Plates by Discrete Singular Convolution and Differential Quadrature Methods [Volume 2, Issue 3, 2016, Pages 128-133]
  • Mercan, Kadir Bending Response of Nanobeams Resting on Elastic Foundation [Volume 4, Issue 2, 2018, Pages 105-114]
  • Mercantini, Matteo Stability Analysis of Articulated Bus in Straight-ahead Running Manoeuvre [Volume 7, Issue 3, 2021, Pages 1649-1662]
  • MERDJI, Ali Biomechanical Evaluation of Bone Quality Effect on Stresses at Bone-Implant Interface: A Finite Element Study [Volume 7, Issue 3, 2021, Pages 1266-1275]
  • Merodio, J. Finite Deformations of Fibre-reinforced Elastic Solids with ‎Fibre Bending Stiffness: A Spectral Approach [Volume 8, Issue 4, 2022, Pages 1332-1342]
  • Merodio, Jose Stability Analysis of an Inflated, Axially Extended, Residually Stressed Circular Cylindrical Tube [Volume 9, Issue 3, 2023, Pages 834-847]
  • Merodio, José Bifurcation of Fiber-Reinforced Cylindrical Membranes under ‎Extension, Inflation, and Swelling [Volume 9, Issue 1, 2023, Pages 113-128]
  • Meshkatifar, Javad Optimal Roll Center Height of Front McPherson Suspension System for a Conceptual Class A Vehicle [Volume 1, Issue 1, 2015, Pages 10-16]
  • Meyer, Yann Performance measure and tool for benchmarking metaheuristic optimization algorithms [Volume 7, Issue 3, 2021, Pages 1803-1813]
  • Micaelo, Rui Numerical Analysis on the Bond Performance of Different ‎Anchored Joints under Monotonic and Cyclic Pull-push Loading [Volume 8, Issue 1, 2022, Pages 388-404]
  • Mieczkowski, Grzegorz Theoretical Analysis of the Motorcycle Front Brake Heating ‎Process during High Initial Speed Emergency Braking [Volume 6, Special Issue, 2020, Pages 1431-1437]
  • Mikhasev, Gennadi Pull-in Instability Analysis of a Nanocantilever Based on the ‎Two-Phase Nonlocal Theory of Elasticity [Volume 8, Issue 4, 2022, Pages 1456-1466]
  • Mikhnych, Vladyslav Thermal Behavior of Monocrystalline Silicon Solar Cells: A ‎Numerical and Experimental Investigation on the Module ‎Encapsulation Materials [Volume 7, Issue 3, 2021, Pages 1847-1855]
  • Mikułowski, Grzegorz On/off Nodal Reconfiguration for Global Structural Control of ‎Smart 2D Frames [Volume 7, Special Issue, 2021, Pages 1121-1129]
  • Milanezi de Andrade, Rafhael Four Legged Guará Robot: From Inspiration to Implementation [Volume 7, Issue 3, 2021, Pages 1425-1434]
  • Milani, Massimo Prediction Capabilities of a One-dimensional Wall-flow ‎Particulate Filter Model [Volume 8, Issue 1, 2022, Pages 245-259]
  • Minakov, Andrey V. Flow Regimes Characteristics of Water-crude Oil in a Rectangular ‎Y-microchannel [Volume 8, Issue 2, 2022, Pages 655-670]
  • Minakov, A.V. Numerical Investigation of Enhanced Oil Recovery from various ‎Rocks by Nanosuspensions Flooding [Volume 8, Issue 1, 2022, Pages 306-318]
  • Minakov, A.V. Verification and Validation of a Network Algorithm for Single-phase Flow Modeling using Microfluidic Experiments [Volume 9, Issue 4, 2023, Pages 1156-1167]
  • Mirabdolah Lavasani, Arash Numerical and Analytical Approach for Film Condensation on Different Forms of Surfaces [Volume 5, Issue 5, 2019, Pages 964-975]
  • Miroshnichenko, Igor V. Influence of Thermal Radiation on Heat Transfer through a ‎Hollow Block [Volume 9, Issue 2, 2023, Pages 419-429]
  • Miroshnichenko, Igor V. Effect of Thermal Conductivity and Emissivity of Solid Walls on Time-Dependent Turbulent Conjugate Convective-Radiative Heat Transfer [Volume 5, Issue 2, 2019, Pages 207-216]
  • Mirzabeigy, Alborz A Note on Free Vibration of a Double-beam System with Nonlinear Elastic Inner Layer [Volume 5, Issue 1, 2019, Pages 174-180]
  • Mirzabeigy, Alborz A Simple Approach for Dealing with Autonomous Conservative ‎Oscillator under Initial Velocity [Volume 8, Issue 3, 2022, Pages 918-924]
  • Mirzavand, Babak Torsional Aeroelasticity of a Flexible VAWT Blade using a Combined Aerodynamic Method by Considering Post-stall and Local Reynolds Regime [Volume 6, Issue 4, 2020, Pages 757-776]
  • Mishra, Kundan Numerical Analysis of an Edge Crack Isotropic Plate with Void/Inclusions under Different Loading by Implementing XFEM [Volume 7, Issue 3, 2021, Pages 1362-1382]
  • Mishra, Shweta Entropy Generation of Variable Viscosity and Thermal Radiation on Magneto Nanofluid Flow with Dusty Fluid [Volume 6, Issue 1, 2020, Pages 171-182]
  • Mishra, Shweta Impact of Microbial Activity and Stratification Phenomena on Generating/Absorbing Sutterby Nanofluid over a Darcy Porous Medium [Volume 9, Issue 3, 2023, Pages 804-819]
  • Mishra, S.R. Metal and Metallic Oxide Nanofluid over a Shrinking Surface with ‎Thermal Radiation and Heat Generation/Absorption [Volume 8, Issue 2, 2022, Pages 557-565]
  • Mishra, S.R. ADM Solution for Cu/CuO –Water Viscoplastic Nanofluid ‎Transient Slip Flow from a Porous Stretching Sheet with Entropy ‎Generation, Convective Wall Temperature and Radiative Effects [Volume 7, Issue 3, 2021, Pages 1291-1305]
  • Mishra, S.R. Free Convection of Micropolar Fluid over an Infinite Inclined ‎Moving Porous Plate [Volume 8, Issue 4, 2022, Pages 1154-1162]
  • Mishurenko, Nikolai Influence of Discretely Introduced Cutouts on the Buckling of Shallow Shells with Double Curvature [Volume 10, Issue 1, 2024, Pages 55-63]
  • Misirli, Emine Conformable Double Sumudu Transform with Applications [Volume 7, Issue 2, 2021, Pages 578-586]
  • Misnik, Vyacheslav Pull-in Instability Analysis of a Nanocantilever Based on the ‎Two-Phase Nonlocal Theory of Elasticity [Volume 8, Issue 4, 2022, Pages 1456-1466]
  • Misra, Ashok Effects of Non-uniform Suction, Heat Generation/Absorption and Chemical Reaction with Activation Energy on MHD Falkner-Skan Flow of Tangent Hyperbolic Nanofluid over a Stretching/Shrinking Eedge [Volume 6, Issue 3, 2020, Pages 640-652]
  • Mitrev, Rosen A Case Study of Combined Application of Smart Materials in a ‎Thermal Energy Harvester with Vibrating Action [Volume 7, Issue 1, 2021, Pages 372-381]
  • Mitroi-Symeonidis, Flavia-Corina The Permutation Entropy and its Applications on Fire Tests Data [Volume 6, Special Issue, 2020, Pages 1380-1393]
  • Miyagawa, Helder Kiyoshi Analysis of Particulate Systems with Numerical Inverse Laplace Transform [Volume 9, Issue 4, 2023, Pages 926-934]
  • Miyagawa, Helder K. Hybrid Solution for the Analysis of MHD Micropolar Fluid Flow in a Vertical Porous Parallel-Plates Duct [Volume 6, Special Issue, 2020, Pages 1107-1124]
  • Mkaoir, Mohamed Lamb Wave Analysis in Anisotropic Multilayer ‎Piezoelectric-piezomagnetic Material [Volume 8, Issue 2, 2022, Pages 629-640]
  • Moatimid, Galal M. Stability Analysis of a Damped Nonlinear Wave Equation [Volume 6, Special Issue, 2020, Pages 1394-1403]
  • Moatimid, Galal M. Approximate Solutions of Coupled Nonlinear Oscillations: ‎Stability Analysis [Volume 7, Issue 2, 2021, Pages 382-395]
  • Moayyedi, Mohammad Kazem Extension Ability of Reduced Order Model of Unsteady Incompressible Flows Using a Combination of POD and Fourier Modes [Volume 5, Issue 1, 2019, Pages 1-12]
  • Mobki, Hamed Pull-in Phenomenon in the Electrostatically Micro-switch ‎Suspended between Two Conductive Plates using the Artificial ‎Neural Network [Volume 8, Issue 4, 2022, Pages 1222-1235]
  • Moghimi, Mahdi Twin Screw Expanders Profile Optimization Using Surrogate-‎Based Modelling [Volume 8, Issue 4, 2022, Pages 1141-1153]
  • Mohagheghi, Mostafa Helicopter Blade Stability Analysis Using Aeroelastic Frequency Response Functions [Volume 1, Issue 3, 2015, Pages 152-160]
  • Mohamad, A. M. Effect of Throughflow on the Convective Instabilities in an ‎Anisotropic Porous Medium Layer with Inconstant Gravity [Volume 7, Issue 4, 2021, Pages 1964-1972]
  • Mohamad, Ahmad Qushairi Mathematical Modelling of MHD Blood Flow with Gold Nanoparticles in Slip Small Arteries [Volume 10, Issue 1, 2024, Pages 125-139]
  • Mohamed, Kezzar Heat Transfer in Hydro-Magnetic Nano-Fluid Flow between Non-Parallel Plates Using DTM [Volume 4, Issue 4, 2018, Pages 352-364]
  • Mohamed, Salwa M. Static Buckling of 2D FG Porous Plates Resting on Elastic ‎Foundation based on Unified Shear Theories‎ [Volume 9, Issue 1, 2023, Pages 239-258]
  • Mohamed Rafik, Sari Heat Transfer in Hydro-Magnetic Nano-Fluid Flow between Non-Parallel Plates Using DTM [Volume 4, Issue 4, 2018, Pages 352-364]
  • Mohammadi, Ali Reza Optimizing Hydro Power Turbines in Order to Secure the Passage of Fishes in Khuzestan province [Volume 1, Issue 2, 2015, Pages 95-102]
  • Mohammadi, Ardeshir Karami Effect of thermoelastic damping in nonlinear beam model of MEMS resonators by differential quadrature method [Volume 1, Issue 3, 2015, Pages 112-121]
  • Mohammadi, Bijan Uniaxial Buckling Analysis Comparison of Nanoplate and Nanocomposite Plate with Central Square Cut out Using Domain Decomposition Method [Volume 2, Issue 4, 2016, Pages 230-242]
  • Mohammadi, Mohammad Reza Optimizing Hydro Power Turbines in Order to Secure the Passage of Fishes in Khuzestan province [Volume 1, Issue 2, 2015, Pages 95-102]
  • Mohammadi, Moona Optimizing Hydro Power Turbines in Order to Secure the Passage of Fishes in Khuzestan province [Volume 1, Issue 2, 2015, Pages 95-102]
  • Mohammadi, Younes Vibration Analysis of Different Types of Porous FG Conical Sandwich Shells in Various Thermal Surroundings [Volume 6, Issue 3, 2020, Pages 416-432]
  • Mohammadifar, Hasan Investigation of Nanofluid Natural Convection Heat Transfer in ‎Open Ended L-shaped Cavities utilizing LBM [Volume 7, Issue 4, 2021, Pages 2064-2083]
  • Mohammad Khanlo, Heshmatallah Distributed-parameter Dynamic Modeling and Bifurcation Analysis of a Trapezoidal Piezomagnetoelastic Energy Harvester [Volume 8, Issue 1, 2022, Pages 97-113]
  • Mohammed, Marwan Qaid Robust P-H∞ Integrated Controller for Flexible Link Manipulator ‎System in the Presence of Disturbance [Volume 7, Issue 2, 2021, Pages 646-654]
  • Mohammed Ibrahim, Shaik Magnetic Field Influence on Thermophoretic Micropolar Fluid Flow over an Inclined Permeable Surface: A Numerical Study [Volume 10, Issue 2, 2024, Pages 369-382]
  • Mohapatra, J. A Parameter Uniform Numerical Scheme for Singularly Perturbed Differential-difference Equations with Mixed Shifts [Volume 6, Issue 2, 2020, Pages 344-356]
  • Mohd Kasim, Abdul Rahman Insight into Stability Analysis on Modified Magnetic Field of ‎Radiative Non-Newtonian Reiner–Philippoff Fluid Model‎ [Volume 8, Issue 2, 2022, Pages 745-753]
  • Mohebbi, Akbar Implicit RBF Meshless Method for the Solution of Two-dimensional Variable Order Fractional Cable Equation [Volume 6, Issue 2, 2020, Pages 235-247]
  • Mohi, S. Abdul On the Six Node Hexagon Elements for Continuum Topology Optimization of Plates Carrying in Plane Loading and Shell Structures Carrying out of Plane Loading [Volume 6, Issue 3, 2020, Pages 617-639]
  • Mohsen, A.M. Two-Dimensional Numerical Study of the Transient Flow ‎Conditions in Complete Shock Tunnel‎ [Volume 7, Issue 2, 2021, Pages 956-964]
  • Mohsnain, Syed Mohammad New Exact Traveling Wave Solutions for Fractional Order System ‎Describing the Second Grade Fluid through Medium with Heat ‎Transfer‎ [Volume 7, Issue 2, 2021, Pages 764-781]
  • Mohyud-Din, Syed Tauseef Jeffery Hamel Flow of a non-Newtonian Fluid [Volume 2, Issue 1, 2016, Pages 21-28]
  • Mokhtari, Javad Effect of Variable Thermal Expansion Coefficient and Nanofluid Properties on Steady Natural Convection in an Enclosure [Volume 3, Issue 4, 2017, Pages 240-250]
  • Mokhtari, Javad VOC level control by ventilation improvement of Flexography printing room using CFD modeling [Volume 3, Issue 3, 2017, Pages 171-177]
  • Molaei, Ahad Torsional Aeroelasticity of a Flexible VAWT Blade using a Combined Aerodynamic Method by Considering Post-stall and Local Reynolds Regime [Volume 6, Issue 4, 2020, Pages 757-776]
  • Molayi, Maryam Dynamically Consistent NSFD Methods for Predator-prey System [Volume 7, Issue 3, 2021, Pages 1565-1574]
  • Molayi, Maryam Nonstandard Dynamically Consistent Numerical Methods for ‎MSEIR Model [Volume 8, Issue 1, 2022, Pages 196-205]
  • Mollayi, Nader Modeling of Weld Bead Geometry Using Adaptive Neuro-Fuzzy Inference System (ANFIS) in Additive Manufacturing [Volume 6, Issue 1, 2020, Pages 160-170]
  • Momen, Mahyar A New Approach for Exergoeconomics Evaluation by Considering ‎Uncertainty with Monte Carlo Method [Volume 9, Issue 1, 2023, Pages 15-24]
  • Momeni, Fereshte Analytical Solutions and Analyses of the Displacement ‎Separating Point in Diffusers [Volume 8, Issue 3, 2022, Pages 891-903]
  • Mondal, Hiranmoy Entropy Generation of Variable Viscosity and Thermal Radiation on Magneto Nanofluid Flow with Dusty Fluid [Volume 6, Issue 1, 2020, Pages 171-182]
  • Mondal, Hiranmoy Spectral Quasi-linearization for MHD Nanofluid Stagnation Boundary Layer Flow due to a Stretching/Shrinking Surface [Volume 6, Issue 4, 2020, Pages 1058-1068]
  • Mondal, Hiranmoy Effect of Cattaneo-Christov Heat Flux on Radiative ‎Hydromagnetic Nanofluid Flow between Parallel Plates using ‎Spectral Quasilinearization Method [Volume 8, Issue 3, 2022, Pages 865-875]
  • Mondal, Hiranmoy Impact of Microbial Activity and Stratification Phenomena on Generating/Absorbing Sutterby Nanofluid over a Darcy Porous Medium [Volume 9, Issue 3, 2023, Pages 804-819]
  • Mondal, Rabindra Nath Numerical Investigation on Flow Transition through a Curved ‎Square Duct with Negative Rotation [Volume 7, Issue 3, 2021, Pages 1435-1447]
  • Monge, J.C. On Bending Response of Doubly Curved Laminated Composite Shells Using Hybrid Refined Models [Volume 5, Issue 5, 2019, Pages 875-899]
  • Moniri Bidgoli, Ali Mohammad Analytical bending solution of fully clamped orthotropic rectangular plates resting on elastic foundations by the finite integral transform method [Volume 1, Issue 2, 2015, Pages 52-58]
  • Montorsi, Luca Prediction Capabilities of a One-dimensional Wall-flow ‎Particulate Filter Model [Volume 8, Issue 1, 2022, Pages 245-259]
  • Morabito, Francescogiuseppe Linear dynamic response of nanobeams accounting for higher gradient effects [Volume 2, Issue 2, 2016, Pages 54-64]
  • Morachkovska, Iryna Analysis of Free Vibration of Porous Power-law and Sigmoid Functionally Graded Sandwich Plates by the R-functions Method [Volume 9, Issue 4, 2023, Pages 1144-1155]
  • Morales Rojas, Andrés David Fluid-dynamic Simulations for Assessment of Dimensioning ‎Methodologies of Pelton Turbine Buckets Considering the Initial ‎Torque Overcoming [Volume 9, Issue 4, 2023, Pages 1036-1048]
  • Morandini, Marco Parametric Optimization of a Cyclogiro Aircraft Design for Efficient Hover with Aeroelastic Considerations [Volume 7, Issue 3, 2021, Pages 1774-1787]
  • Moraveji Tabasi, Horae Buckling and Free Vibration Analysis of Fiber Metal-laminated Plates Resting on Partial Elastic Foundation [Volume 6, Issue 1, 2020, Pages 37-51]
  • Moreira, Rafael San Martin Numerical Study and Geometric Investigation of Corrugated ‎Channels Subjected to Forced Convective Flows [Volume 7, Issue 2, 2021, Pages 727-738]
  • Morelli, Laura Vibration Mitigation of Rail Noise Barriers by Hysteretic Absorbers [Volume 7, Special Issue, 2021, Pages 1205-1217]
  • Mosalmani, Reza Size Effect on the Axisymmetric Vibrational Response of ‎Functionally Graded Circular Nano-Plate Based on the Nonlocal Stress-Driven Method [Volume 8, Issue 3, 2022, Pages 962-980]
  • Mosalmani, Reza Stress-driven Approach to Vibrational Analysis of FGM Annular ‎Nano-plate based on First-order Shear Deformation Plate Theory [Volume 9, Issue 3, 2023, Pages 637-655]
  • Moshtaghi, Nasrin Numerical Solution of Time Fractional Cable Equation via the Sinc-Bernoulli Collocation Method [Volume 7, Issue 4, 2021, Pages 1916-1924]
  • Moslemi, Mehdi Temperature Effect on Moving Water Droplets at the Channel of ‎PEMFC by Multi-component Multiphase Lattice Boltzmann Method [Volume 9, Issue 3, 2023, Pages 607-622]
  • Motififard, Mehdi Nanostructure, Molecular Dynamics Simulation and Mechanical Performance of PCL Membranes Reinforced with Antibacterial Nanoparticles [Volume 7, Issue 4, 2021, Pages 1907-1915]
  • Motsa, Sandile S. A Paired Quasi-linearization on Magnetohydrodynamic Flow and Heat Transfer of Casson Nanofluid with Hall Effects [Volume 5, Issue 5, 2019, Pages 849-860]
  • Mölder, Sannu Performance of Two Types of High Speed, High Efficiency ‎Axisymmetric Intakes [Volume 7, Issue 1, 2021, Pages 93-101]
  • Moura, Carlos H.R. Parameter Estimation in Population Balance through Bayesian ‎Technique Markov Chain Monte Carlo [Volume 7, Issue 2, 2021, Pages 890-901]
  • Moussavi Torshizi, Seyed Ebrahim Multi-objective Optimization of Shot-peening Parameters using ‎Design of Experiments and Finite Element Simulation: A ‎Statistical Model [Volume 8, Issue 3, 2022, Pages 838-852]
  • Muhammad, Jan Meshfree Collocation Method for the Numerical Solution of ‎Higher Order KdV Equation [Volume 7, Issue 2, 2021, Pages 422-431]
  • Muhammad, Jan On Integrability up to the Boundary of the Weak Solutions to a ‎Class of non-Newtonian Compressible Fluids with Vacuum [Volume 7, Issue 3, 2021, Pages 1527-1536]
  • Muhammad Imran, Syed Diffusion-thermo Effects in Stagnation Point Flow of Second ‎Grade Fluid past a Stretching Plate [Volume 7, Issue 2, 2021, Pages 902-912]
  • Mukaddes, Abul Mukid Mohammad Numerical Investigation of Tissue-Temperature Controlled ‎System in Thermal Ablation: A Finite Element Approach [Volume 7, Issue 3, 2021, Pages 1826-1835]
  • Mukanova, Balgaisha Control of Actuators Torques for Optimal Movement along a ‎Given Trajectory for the DexTAR Robot [Volume 7, Issue 1, 2021, Pages 165-176]
  • Mukanova, Balgaisha Regularization of the Movement of a Material Point Along a Flat ‎Trajectory: Application to Robotics Problems [Volume 7, Issue 3, 2021, Pages 1726-1736]
  • MUKDADI, Osama Biomechanical Evaluation of Bone Quality Effect on Stresses at Bone-Implant Interface: A Finite Element Study [Volume 7, Issue 3, 2021, Pages 1266-1275]
  • Mumraiz, Sana Third-grade Fluid Flow of Stretching Cylinder with Heat Source/Sink [Volume 6, Special Issue, 2020, Pages 1125-1132]
  • Munafo, C.F. Analysis of a Hyperbolic Heat Transfer Model in Blood-perfused ‎Biological Tissues with Laser Heating [Volume 8, Issue 4, 2022, Pages 1398-1406]
  • Mushahary, P. A Parameter Uniform Numerical Scheme for Singularly Perturbed Differential-difference Equations with Mixed Shifts [Volume 6, Issue 2, 2020, Pages 344-356]
  • Musiket, Kamtornkiat Accuracy and Convergence Rate Comparative Investigation on ‎Polytope Smoothed and Scaled Boundary Finite Element [Volume 9, Issue 1, 2023, Pages 226-238]
  • Mustopa, Enjang J. Two-Solid Deposition in Fluid Column using Immersed ‎Boundary-Lattice Boltzmann Method [Volume 7, Issue 3, 2021, Pages 1814-1825]
  • Muthtamilselvan, M. Unsteady Separated Stagnation Point Flow of Nanofluid past a ‎Moving Flat Surface in the Presence of Buongiorno's Model [Volume 7, Issue 3, 2021, Pages 1283-1290]
  • Muthu, P. Mathematical Model of Fluid Flow and Solute Transport in ‎Converging-diverging Permeable Tubes [Volume 9, Issue 4, 2023, Pages 900-914]
  • My, Chu A. Robust P-H∞ Integrated Controller for Flexible Link Manipulator ‎System in the Presence of Disturbance [Volume 7, Issue 2, 2021, Pages 646-654]
  • Myntiuk, Sofia Spectral Methods Application in Problems of the Thin-walled ‎Structures Deformation [Volume 8, Issue 2, 2022, Pages 641-654]
  • Myntiuk, Vitalii Spectral Methods Application in Problems of the Thin-walled ‎Structures Deformation [Volume 8, Issue 2, 2022, Pages 641-654]

N

  • Naderi, Mahmood Experimental and Finite Element Study to Determine the ‎Mechanical Properties and Bond Between Repair Mortars and ‎Concrete Substrates [Volume 8, Issue 2, 2022, Pages 493-509]
  • Naderi, Reza Local and Global Approaches to Fracture Mechanics Using Isogeometric Analysis Method [Volume 1, Issue 4, 2015, Pages 168-180]
  • Nafeh, Hind A. Automatic Structural Synthesis of Planetary Geared Mechanisms ‎using Graph Theory [Volume 9, Issue 2, 2023, Pages 384-403]
  • Nagar, Atulya K. Theoretical Study on Poiseuille Flow of Herschel-Bulkley Fluid in ‎Porous Media‎ [Volume 8, Issue 4, 2022, Pages 1246-1269]
  • Nagaraja, B. Entropy Analysis of Darcy-Forchheimer Model of Prandtl Nanofluid over a Curved Stretching Sheet and Heat Transfer Optimization by ANOVA-Taguchi Technique [Volume 10, Issue 2, 2024, Pages 287-303]
  • Naga Santoshi, P. Numerical Scrutinization of Three Dimensional Casson-Carreau Nano Fluid Flow [Volume 6, Issue 3, 2020, Pages 531-542]
  • Nagendra, N. Magneto Casson-Carreau Fluid Flow through a Circular Porous ‎Cylinder with Partial Slip‎ [Volume 8, Issue 4, 2022, Pages 1208-1221]
  • Naikoti, Kishan Effect of Chemical Reaction on Bioconvective Flow in Oxytactic Microorganisms Suspended Porous Cavity [Volume 6, Issue 3, 2020, Pages 653-664]
  • Nair, Manoj T. Higher-Order Slope Limiters for Euler Equation [Volume 8, Issue 3, 2022, Pages 904-917]
  • NAIT BOUDA, NOURA 3D Numerical Investigation of Heat Transfer Performance in Liquid-liquid Taylor Flow [Volume 10, Issue 1, 2024, Pages 183-204]
  • Najafi, Amirali Validation of Model-Based Real-Time Hybrid Simulation for a Lightly-Damped and Highly-Nonlinear Structural System [Volume 7, Special Issue, 2021, Pages 1252-1265]
  • Nakhchi, Mahdi Erfanian An Experimental and Numerical Study on the Aerodynamic ‎Performance of Vibrating Wind Turbine Blade with Frequency-‎Domain Method [Volume 7, Issue 3, 2021, Pages 1737-1750]
  • Nakhchi, Mahdi E. Forced Response of a Low-Pressure Turbine Blade using ‎Spectral/hp Element Method: Direct Numerical Simulation‎ [Volume 7, Issue 1, 2021, Pages 135-147]
  • Nardin, Michel Using the Finite Element Analysis Method to Study the 3-point Bending Test for the Characterization of the Adherence [Volume 6, Issue 3, 2020, Pages 505-516]
  • Narender, G. MHD Casson Nanofluid Past a Stretching Sheet with the Effects of Viscous Dissipation, Chemical Reaction and Heat Source/Sink [Volume 7, Issue 4, 2021, Pages 2040-2048]
  • Nasedkin, Andrey Multilevel Modeling of 1-3 Piezoelectric Energy Harvester Based ‎on Porous Piezoceramics [Volume 9, Issue 3, 2023, Pages 763-774]
  • Nasihatgozar, M. Free Vibration of a Thick Sandwich Plate Using Higher Order Shear Deformation Theory and DQM for Different Boundary Conditions [Volume 3, Issue 1, 2017, Pages 16-24]
  • Nasir, Ayman Direct Normal Form Analysis of Oscillators with Different ‎Combinations of Geometric Nonlinear Stiffness Terms [Volume 7, Special Issue, 2021, Pages 1167-1182]
  • Nasr, Mohamed E. Thermoelastic Vibrations of Nonlocal Nanobeams Resting on a ‎Pasternak Foundation via DPL Model [Volume 7, Issue 1, 2021, Pages 34-44]
  • Nasri, Wiem Thermal Behavior of Mesoporous Aramid Fiber Reinforced Silica Aerogel Composite for Thermal Insulation Applications: Microscale Modeling [Volume 10, Issue 1, 2024, Pages 140-151]
  • Natarajan, Sundararajan Evaluation of Fracture Parameters by Coupling the Edge-Based Smoothed Finite Element Method and the Scaled Boundary Finite Element Method [Volume 5, Special Issue: Computational Methods for Material Failure, 2019, Pages 540-551]
  • Naung, Shine Win An Experimental and Numerical Study on the Aerodynamic ‎Performance of Vibrating Wind Turbine Blade with Frequency-‎Domain Method [Volume 7, Issue 3, 2021, Pages 1737-1750]
  • Nawaz, Rashid Comparative Study of Plane Poiseuille Flow of Non-isothermal ‎Couple ‎Stress Fluid of Reynold Viscosity Model using Optimal ‎Homotopy ‎Asymptotic Method and New Iterative Method [Volume 7, Issue 2, 2021, Pages 404-414]
  • Nawaz, Sara Third-grade Fluid Flow of Stretching Cylinder with Heat Source/Sink [Volume 6, Special Issue, 2020, Pages 1125-1132]
  • Nawaz Khan, Muhammad A Radial Basis Function Collocation Method for Space-dependent ‎Inverse Heat Problems [Volume 6, Special Issue, 2020, Pages 1187-1199]
  • Nayak, M.K. Effect of Exponentially Variable Viscosity and Permeability on Blasius Flow of Carreau Nano Fluid over an Electromagnetic Plate through a Porous Medium [Volume 5, Issue 2, 2019, Pages 390-401]
  • Nayak, M.K. Effects of Non-uniform Suction, Heat Generation/Absorption and Chemical Reaction with Activation Energy on MHD Falkner-Skan Flow of Tangent Hyperbolic Nanofluid over a Stretching/Shrinking Eedge [Volume 6, Issue 3, 2020, Pages 640-652]
  • Nayebi, Ali Springback Modeling in L-bending Process Using Continuum Damage Mechanics Concept [Volume 1, Issue 3, 2015, Pages 161-167]
  • Naz, Memona Simultaneous Flow of Three Immiscible Fractional Maxwell Fluids ‎with the Clear and Hoamogeneous Porous Cylindrical Domain [Volume 6, Special Issue, 2020, Pages 1324-1334]
  • Nazha, Hasan Effect of Coating Materials on the Fatigue Behavior of Hip Implants: A Three-dimensional Finite Element Analysis [Volume 6, Issue 2, 2020, Pages 284-295]
  • Ndlovu, Partner Luyanda Numerical Analysis of Transient Heat Transfer in Radial Porous Moving Fin with Temperature Dependent Thermal Properties [Volume 6, Issue 1, 2020, Pages 137-144]
  • Nedkova, Nataliya Dynamical Behavior of a Rigid Body with One Fixed Point (Gyroscope). Basic Concepts and Results. Open Problems: a Review [Volume 1, Issue 4, 2015, Pages 187-206]
  • Nee, Alexander Comparative Study of Hybrid Lattice Boltzmann and Vorticity-‎vector Potential Modelling of 2D and 3D Natural Convection ‎Combined with Rosseland Radiation [Volume 8, Issue 4, 2022, Pages 1467-1479]
  • Nejat Pishkenari, Hossein Size Effect Impact on the Mechanical Behavior of an Electrically Actuated Polysilicon Nanobeam based NEMS Resonator [Volume 3, Issue 2, 2017, Pages 135-143]
  • Nejlaoui, Mohamed Design Optimization and Experimental Validation of Low-Cost ‎Flat Plate Collector Under Central Qasssim Climate [Volume 7, Issue 2, 2021, Pages 811-819]
  • Nemnem, Ahmed Miscellaneous Modeling Approaches and Testing of a Satellite Honeycomb Sandwich Plate [Volume 6, Special Issue, 2020, Pages 1084-1097]
  • Neufeld, João Pedro Sarasol Applicability Evidence of Constructal Design in Structural ‎Engineering: Case Study of Biaxial Elasto-Plastic Buckling of ‎Square Steel Plates with Elliptical Cutout [Volume 7, Issue 2, 2021, Pages 922-934]
  • Ngondiep, Eric A Robust Three-Level Time-Split MacCormack Scheme for Solving ‎Two-Dimensional Unsteady Convection-Diffusion Equation [Volume 7, Issue 2, 2021, Pages 559-577]
  • Nguyen, Diem Dang Weighted Dual Approach to an Equivalent Stiffness-based Load ‎Transfer Model for Jacked Open-ended Pile [Volume 7, Issue 3, 2021, Pages 1751-1763]
  • Nguyen, Kuu Van Weighted Dual Approach to an Equivalent Stiffness-based Load ‎Transfer Model for Jacked Open-ended Pile [Volume 7, Issue 3, 2021, Pages 1751-1763]
  • Nguyen, Ngoc Anh Weighted Dual Approach to an Equivalent Stiffness-based Load ‎Transfer Model for Jacked Open-ended Pile [Volume 7, Issue 3, 2021, Pages 1751-1763]
  • Nguyen, Pham Dinh Nonlinear Dynamic Response of Functionally Graded Porous Plates on Elastic Foundation Subjected to Thermal and Mechanical Loads [Volume 4, Issue 4, 2018, Pages 245-259]
  • Nguyen, Thi Phuong An Analytical Approach of Nonlinear Thermo-mechanical Buckling of Functionally Graded Graphene-reinforced Composite Laminated Cylindrical Shells under Compressive Axial Load Surrounded by Elastic Foundation [Volume 6, Issue 2, 2020, Pages 357-372]
  • Nguyen, Thoi Trung An Analytical Approach of Nonlinear Thermo-mechanical Buckling of Functionally Graded Graphene-reinforced Composite Laminated Cylindrical Shells under Compressive Axial Load Surrounded by Elastic Foundation [Volume 6, Issue 2, 2020, Pages 357-372]
  • Nguyen-Van, Hieu Nonlinear Bending Analysis of Functionally Graded Plates Using SQ4T Elements based on Twice Interpolation Strategy [Volume 6, Issue 1, 2020, Pages 125-136]
  • Nikkhah Bahrami, Mansour Study on Free Vibration and Wave Power Reflection in Functionally Graded Rectangular Plates using Wave Propagation Approach [Volume 5, Issue 1, 2019, Pages 77-90]
  • Nikolov, Svetoslav Ganchev Dynamical Behavior of a Rigid Body with One Fixed Point (Gyroscope). Basic Concepts and Results. Open Problems: a Review [Volume 1, Issue 4, 2015, Pages 187-206]
  • Niroomand, Mohammad Reza Design, Analysis and Manufacturing of a Bone Cutting Ultrasonic Horn-Tool and Verification with Experimental Tests [Volume 8, Issue 2, 2022, Pages 438-447]
  • Nishad, Chandra Shekhar Effect of Magnetic Field on Viscous Flow through Composite ‎Porous Channel using Boundary Element Method [Volume 9, Issue 4, 2023, Pages 1016-1035]
  • Noguez, Marco A. Discretization of the 2D Convection–Diffusion Equation Using ‎Discrete Exterior Calculus [Volume 6, Special Issue, 2020, Pages 1348-1363]
  • Nolot, Jean-Baptiste Finite Element and Experimental Investigation on the Effect of ‎Repetitive Shock in Corrugated Cardboard Packaging [Volume 7, Issue 2, 2021, Pages 820-830]
  • Noormohammadi Arani, Omid Investigation on the Crack Effect in the Cylinder and Matrix on the Backscattering Field Frequency Specifications using the Finite Element Method [Volume 8, Issue 2, 2022, Pages 448-455]
  • Noormohammadi Arani, Omid Calculation of Backscattered Ultrasonic Waves Field from a ‎Copper-clad Steel Rod Immersing in Water and Effect of Clad ‎Corrosion and Interfacial Disbond between Clad and Rod Defects ‎on this Field using the Finite Element Method [Volume 9, Issue 1, 2023, Pages 58-71]
  • Noskov, Mikhail Analysis of Possibilities to Use Predictive Mathematical Models ‎for Studying the Dam Deformation State [Volume 8, Issue 2, 2022, Pages 733-744]
  • Nour, Abdelkader Solving Duffing-Van der Pol Oscillator Equations of Fractional ‎Order by an Accurate Technique [Volume 7, Issue 3, 2021, Pages 1480-1487]
  • Nouri, Ali Dynamic Buckling of Embedded Laminated Nanocomposite Plates Based on Sinusoidal Shear Deformation Theory [Volume 2, Issue 4, 2016, Pages 254-261]
  • Nourouzi, Salman Experimental Study on the Surface Modification by Electrical Discharge Process [Volume 5, Issue 2, 2019, Pages 249-257]
  • Nuantong, Weerapon Sweep Blade Design for an Axial Wind Turbine using a Surrogate-‎assisted Differential Evolution Algorithm [Volume 9, Issue 1, 2023, Pages 217-225]
  • Numanoglu, Hayi Metin Bending Response of Nanobeams Resting on Elastic Foundation [Volume 4, Issue 2, 2018, Pages 105-114]
  • Numanoglu, Hayri Metin Application of Newmark Average Acceleration and Ritz Methods ‎on Dynamical Analysis of Composite Beams under a Moving Load [Volume 8, Issue 2, 2022, Pages 764-773]
  • Nussipali, Rollan Computational and Experimental Study of the Composite ‎Material for the Centrifugal Pump Impellers Manufacturing [Volume 8, Issue 4, 2022, Pages 1407-1421]
  • Nwaigwe, Chinedu Sequential Implicit Numerical Scheme for Pollutant and Heat Transport in a Plane-Poiseuille Flow [Volume 6, Issue 1, 2020, Pages 13-25]

O

  • Oganesyan, Pavel Multilevel Modeling of 1-3 Piezoelectric Energy Harvester Based ‎on Porous Piezoceramics [Volume 9, Issue 3, 2023, Pages 763-774]
  • Ogundare, Adebayo A. Study of the Vibration Characteristics of SA 330 Helicopter Planetary Main Gearbox [Volume 9, Issue 4, 2023, Pages 1093-1106]
  • Ogunmola, Bayo Yemisi Thermo-mechanical nonlinear vibration analysis of fluid-conveying structures subjected to different boundary conditions using Galerkin-Newton-Harmonic balancing method [Volume 3, Issue 1, 2017, Pages 60-79]
  • Oguntala, George Thermal Analysis of Convective-Radiative Fin with Temperature-Dependent Thermal Conductivity Using Chebychev Spectral Collocation Method [Volume 4, Issue 2, 2018, Pages 87-94]
  • OGUNTALA, George A Haar Wavelet Collocation Method for Thermal Analysis of Porous Fin with Temperature-dependent Thermal Conductivity and Internal Heat Generation [Volume 3, Issue 3, 2017, Pages 185-191]
  • Ojolo, Sunday J. Study of the Vibration Characteristics of SA 330 Helicopter Planetary Main Gearbox [Volume 9, Issue 4, 2023, Pages 1093-1106]
  • Oke, S.I. Inherent Irreversibility of Exothermic Chemical Reactive Third-Grade Poiseuille Flow of a Variable Viscosity with Convective Cooling [Volume 4, Issue 3, 2018, Pages 167-174]
  • Olabode, John O. Influence of Thermophysical Features on MHD Squeezed Flow of ‎Dissipative Casson Fluid with Chemical and Radiative Effects [Volume 7, Issue 4, 2021, Pages 1999-2009]
  • Olakunle, Salawu Analysis of Transient Rivlin-Ericksen Fluid and Irreversibility of Exothermic Reactive Hydromagnetic Variable Viscosity [Volume 6, Issue 1, 2020, Pages 26-36]
  • Olaye, Osamudiamen Flow and Heat Transfer Analysis of the Sodium Alginate Conveying Copper Nanoparticles between Two Parallel Plates [Volume 3, Issue 4, 2017, Pages 258-266]
  • Olayiwola, Patrick Concerning the Effect of a Viscoelastic Foundation on the Dynamic Stability of a Pipeline System Conveying an Incompressible Fluid [Volume 2, Issue 2, 2016, Pages 96-117]
  • Olayiwola, Patrick Shola Deformation Characteristics of Composite Structures [Volume 2, Issue 3, 2016, Pages 174-191]
  • Oleinik, Phelype Haron WaveMIMO Methodology: Numerical Wave Generation of a ‎Realistic Sea State‎ [Volume 7, Issue 4, 2021, Pages 2129-2148]
  • Oliveira Rocha, Luiz Alberto Multiobjective Geometric Analysis of Stiffened Plates under ‎Bending through Constructal Design Method [Volume 6, Special Issue, 2020, Pages 1438-1449]
  • Olofinkua, Joseph O. Flow and Heat Transfer Analysis of the Sodium Alginate Conveying Copper Nanoparticles between Two Parallel Plates [Volume 3, Issue 4, 2017, Pages 258-266]
  • Olunloyo, Vincent Concerning the Effect of a Viscoelastic Foundation on the Dynamic Stability of a Pipeline System Conveying an Incompressible Fluid [Volume 2, Issue 2, 2016, Pages 96-117]
  • Olusoji Fatunmbi, Ephesus Analysis of Entropy Generation in Hydromagnetic Micropolar Fluid Flow over an Inclined Nonlinear Permeable Stretching Sheet with Variable Viscosity [Volume 6, Special Issue, 2020, Pages 1301-1313]
  • Omidinasab, Fereydoon Finite Element Analysis for CFST Columns under Blast Loading [Volume 3, Issue 4, 2017, Pages 283-292]
  • Omidinasab, Fereydoon A Hybrid Particle Swarm Optimization and Genetic Algorithm for Truss Structures with Discrete Variables [Volume 6, Issue 3, 2020, Pages 593-604]
  • Orlande, Helcio Rangel Barreto Analysis of Particulate Systems with Numerical Inverse Laplace Transform [Volume 9, Issue 4, 2023, Pages 926-934]
  • Orłowska, Anita On/off Nodal Reconfiguration for Global Structural Control of ‎Smart 2D Frames [Volume 7, Special Issue, 2021, Pages 1121-1129]
  • Orozco Murillo, William Analysis of a Jet Pump Performance under Different Primary Nozzle ‎Positions and Inlet Pressures using two Approaches: One Dimensional ‎Analytical Model and Three Dimensional CFD Simulations‎ [Volume 6, Special Issue, 2020, Pages 1228-1244]
  • Orozco Murillo, William Geometric Optimization of Jet Pump Used in Vacuum ‎Distillation Applications under Different Operating Conditions ‎using Genetic-algorithm Methods [Volume 8, Issue 1, 2022, Pages 340-358]
  • Osheku, Charles Concerning the Effect of a Viscoelastic Foundation on the Dynamic Stability of a Pipeline System Conveying an Incompressible Fluid [Volume 2, Issue 2, 2016, Pages 96-117]
  • Osheku, Charles Attah Thermo-mechanical nonlinear vibration analysis of fluid-conveying structures subjected to different boundary conditions using Galerkin-Newton-Harmonic balancing method [Volume 3, Issue 1, 2017, Pages 60-79]
  • Ossia, Chinwuba Victor Analysis of the Coupled Nonlinear Vibration of a Two-Mass System [Volume 5, Issue 5, 2019, Pages 935-950]
  • Ostertak, Dmitriy I. Impact-enhanced Electrostatic Vibration Energy Harvester [Volume 8, Issue 2, 2022, Pages 671-683]
  • Otegbeye, O. A Paired Quasi-linearization on Magnetohydrodynamic Flow and Heat Transfer of Casson Nanofluid with Hall Effects [Volume 5, Issue 5, 2019, Pages 849-860]
  • Otegbeye, O. Magnetohydrodynamic Bio-convective Casson Nanofluid Flow: A Numerical Simulation by Paired Quasilinearisation [Volume 7, Issue 4, 2021, Pages 2024-2039]
  • Ouakad, Hassen Size Effect Impact on the Mechanical Behavior of an Electrically Actuated Polysilicon Nanobeam based NEMS Resonator [Volume 3, Issue 2, 2017, Pages 135-143]
  • OUAKAD, Hassen M. Pull-in Phenomenon in the Electrostatically Micro-switch ‎Suspended between Two Conductive Plates using the Artificial ‎Neural Network [Volume 8, Issue 4, 2022, Pages 1222-1235]
  • Oucif, Chahmi Cyclic and Monotonic Behavior of Strengthened and Unstrengthened Square Reinforced Concrete Columns [Volume 5, Special Issue: Computational Methods for Material Failure, 2019, Pages 517-525]
  • Oucif, Chahmi Modeling of Self-Healing Concrete: A Review [Volume 5, Special Issue: Computational Methods for Material Failure, 2019, Pages 526-539]
  • Outa, Roberto Prognosis and Detection of Experimental Failures in Open Field Diesel ‎Engines Applying Wiener's Artificial Immunological Systems [Volume 7, Issue 1, 2021, Pages 1-12]
  • Outa, Roberto Analysis and Recognition of Standards in Intelligent Hybrid ‎Systems using Natural Computing [Volume 7, Issue 3, 2021, Pages 1764-1773]
  • Ouzaa, Kheira Cyclic and Monotonic Behavior of Strengthened and Unstrengthened Square Reinforced Concrete Columns [Volume 5, Special Issue: Computational Methods for Material Failure, 2019, Pages 517-525]
  • Ozturk, Duygu A Method for Determination of the Fundamental Period of Layered Soil Profiles [Volume 3, Issue 4, 2017, Pages 267-273]

P

  • Pacheco-Chérrez, Josué Measuring Crack-type Damage Features in Thin-walled ‎Composite Beams using De-noising and a 2D Continuous Wavelet ‎Transform of Mode Shapes [Volume 7, Issue 1, 2021, Pages 355-371]
  • Padma, P. Numerical Scrutinization of Three Dimensional Casson-Carreau Nano Fluid Flow [Volume 6, Issue 3, 2020, Pages 531-542]
  • Pakhaliuk, Vladimir Ivanovich Reducing the Wear of the UHMWPE Used in the Total Hip ‎Replacement after Low-Pressure Plasma Treatment [Volume 8, Issue 3, 2022, Pages 1035-1042]
  • Pakhare, K.S. Simple Two Variable Refined Theory for Shear Deformable Isotropic Rectangular Beams [Volume 6, Issue 3, 2020, Pages 394-415]
  • Pakian Bushehri, Mojtaba Investigating the Effects of Air Duct Dimensions on Aeration and Hydrodynamic Characteristics of a Surface-piercing Propeller [Volume 10, Issue 2, 2024, Pages 392-405]
  • Pal, Prakash Chandra Love Wave Propagation in a Fiber-reinforced Layer with Corrugated Boundaries Overlying Heterogeneous Half-space [Volume 5, Issue 5, 2019, Pages 926-934]
  • Palacio-Fernández, José A. Geometric Optimization of Jet Pump Used in Vacuum ‎Distillation Applications under Different Operating Conditions ‎using Genetic-algorithm Methods [Volume 8, Issue 1, 2022, Pages 340-358]
  • Palacio-Fernande, José Alfredo Analysis of a Jet Pump Performance under Different Primary Nozzle ‎Positions and Inlet Pressures using two Approaches: One Dimensional ‎Analytical Model and Three Dimensional CFD Simulations‎ [Volume 6, Special Issue, 2020, Pages 1228-1244]
  • Pallante, Chiara Linear dynamic response of nanobeams accounting for higher gradient effects [Volume 2, Issue 2, 2016, Pages 54-64]
  • Panagiotopoulos, Alexander D. Explicit and Implicit Finite -Volume Methods for Depth Averaged Free-Surface Flows [Volume 6, Special Issue, 2020, Pages 1270-1282]
  • Pancella, Francesca Flexural-Torsional Galloping of Prismatic Structures with Double-Symmetric Cross-Section [Volume 7, Special Issue, 2021, Pages 1049-1069]
  • Pandey, Prashant Numerical Solution of the Time Fractional Reaction-advection-diffusion Equation in Porous Media [Volume 8, Issue 1, 2022, Pages 84-96]
  • Pandit, Biswajit On Approximate Stationary Radial Solutions for a Class of Boundary Value Problems Arising in Epitaxial Growth Theory [Volume 6, Issue 4, 2020, Pages 713-734]
  • Pandit, Biswajit A New Taylor Series based Numerical Method: Simple, Reliable, and Promising [Volume 9, Issue 4, 2023, Pages 1122-1134]
  • Panedpojaman, Pattamad Nonlinear Winkler-based Frame Element with Inclusion of Shear-Flexure Interaction Effect for Analysis of Non-Ductile RC Members on Foundation [Volume 7, Issue 1, 2021, Pages 148-164]
  • Panigrahi, S. K. A DWT and SVM based method for rolling element bearing fault diagnosis and its comparison with Artificial Neural Networks [Volume 3, Issue 1, 2017, Pages 80-91]
  • Papazafeiropoulos, George Investigation of the Static Bending Response of FGM Sandwich Plates [Volume 10, Issue 1, 2024, Pages 26-37]
  • Pappalardo, Carmine Maria A General Multibody Approach for the Linear and Nonlinear Stability Analysis of Bicycle Systems. Part I: Methods of Constrained Dynamics [Volume 7, Issue 2, 2021, Pages 655-670]
  • Pappalardo, Carmine Maria A General Multibody Approach for the Linear and Nonlinear Stability Analysis of Bicycle Systems. Part II: Application to the Whipple-Carvallo Bicycle Model [Volume 7, Issue 2, 2021, Pages 671-700]
  • Pappalardo, Carmine Maria On the Analytical and Computational Methodologies for Modelling Two-wheeled Vehicles within the Multibody Dynamics Framework: A Systematic Literature Review [Volume 8, Issue 1, 2022, Pages 153-181]
  • Pappalardo, Carmine Maria Multibody Modeling and Nonlinear Control of a Pantograph Scissor Lift Mechanism [Volume 9, Issue 1, 2023, Pages 129-167]
  • Pappalardo, Carmine Maria A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part I: Analytical Methods and Computational Algorithms [Volume 9, Issue 2, 2023, Pages 529-549]
  • Pappalardo, Carmine Maria A Systematic Computational and Experimental Study of the Principal Data-Driven Identification Procedures. Part II: Numerical Analysis and Experimental Testing [Volume 9, Issue 2, 2023, Pages 550-589]
  • Parand, Kourosh An Efficient Numerical Method to Solve the Boundary Layer Flow of an Eyring-Powell Non-Newtonian Fluid [Volume 5, Issue 2, 2019, Pages 454-467]
  • Park, Y.H. Development of an Educational Code of Deriving Equations of ‎Motion and Analyzing Dynamic Characteristics of Multibody ‎Closed Chain Systems using GNU Octave for a Beginner [Volume 8, Issue 1, 2022, Pages 232-244]
  • Park, Yonghui Stability Assessment of the Flexible System using Redundancy [Volume 6, Issue 3, 2020, Pages 471-479]
  • Park, Yonghui Dynamic Investigation of Non-linear Behavior of Hydraulic Cylinder in Mold Oscillator using PID Control Process [Volume 7, Issue 1, 2021, Pages 270-276]
  • Park, Yonghui An Automatic Program of Generation of Equation of Motion and ‎Dynamic Analysis for Multi-body Mechanical System using GNU Octave [Volume 7, Issue 3, 2021, Pages 1687-1697]
  • Parvathi, Meruva Magnetic Field Influence on Thermophoretic Micropolar Fluid Flow over an Inclined Permeable Surface: A Numerical Study [Volume 10, Issue 2, 2024, Pages 369-382]
  • PasandidehFard, Mahmoud Performance Investigation of Simple Low-dissipation AUSM ‎‎(SLAU) Scheme in Modeling of 2-D Inviscid Flow in Steam ‎Turbine Cascade Blades [Volume 9, Issue 2, 2023, Pages 332-345]
  • Pasdar, Amir Hossein A Comparative Study on the Efficiency of Compiled Languages ‎and MATLAB/Simulink for Simulation of Highly Nonlinear ‎Automotive Systems [Volume 8, Issue 3, 2022, Pages 853-864]
  • Pasha, Amjad Ali Study of Parameters Affecting Separation Bubble Size in High Speed Flows using k-ω Turbulence Model [Volume 4, Issue 2, 2018, Pages 95-104]
  • Pashaei, Mohammad Hadi Solution of strongly nonlinear oscillator problem arising in Plasma Physics with Newton Harmonic Balance Method [Volume 1, Issue 2, 2015, Pages 59-66]
  • Pashaei, Mohammad Hadi Estimating the Mode Shapes of a Bridge Using Short Time Transmissibility Measurement from a Passing Vehicle [Volume 5, Issue 4, 2019, Pages 735-748]
  • Pashmforoush, Farzad Finite Element Analysis of Low Velocity Impact on Carbon Fibers/Carbon Nanotubes Reinforced Polymer Composites [Volume 6, Issue 3, 2020, Pages 383-393]
  • Pathania, Vijayata Thermoelastic Modeling with Dual Porosity Interacting with an Inviscid Liquid [Volume 10, Issue 1, 2024, Pages 111-124]
  • Pati, Prasenjit Love Wave Propagation in a Fiber-reinforced Layer with Corrugated Boundaries Overlying Heterogeneous Half-space [Volume 5, Issue 5, 2019, Pages 926-934]
  • Patil, P.M. Non-similar Solutions of MHD Mixed Convection over an Exponentially Stretching Surface: Influence of Non-uniform Heat Source or Sink [Volume 7, Issue 3, 2021, Pages 1334-1347]
  • Patiño Arcila, Iván D. Geometric Optimization of Jet Pump Used in Vacuum ‎Distillation Applications under Different Operating Conditions ‎using Genetic-algorithm Methods [Volume 8, Issue 1, 2022, Pages 340-358]
  • Patiño Arcila, Iván David Analysis of a Jet Pump Performance under Different Primary Nozzle ‎Positions and Inlet Pressures using two Approaches: One Dimensional ‎Analytical Model and Three Dimensional CFD Simulations‎ [Volume 6, Special Issue, 2020, Pages 1228-1244]
  • Patiño Arcila, Iván David Fluid-dynamic Simulations for Assessment of Dimensioning ‎Methodologies of Pelton Turbine Buckets Considering the Initial ‎Torque Overcoming [Volume 9, Issue 4, 2023, Pages 1036-1048]
  • Patra, A. Effects of Non-uniform Suction, Heat Generation/Absorption and Chemical Reaction with Activation Energy on MHD Falkner-Skan Flow of Tangent Hyperbolic Nanofluid over a Stretching/Shrinking Eedge [Volume 6, Issue 3, 2020, Pages 640-652]
  • Paulo Davim, J. Analysis and Optimization of Truss Structures, Constrained ‎Handling using Genetic Algorithm [Volume 7, Issue 3, 2021, Pages 1324-1333]
  • Pavanello, Renato Topology Optimization of the Thickness Profile of Bimorph Piezoelectric Energy Harvesting Devices [Volume 5, Issue 1, 2019, Pages 113-127]
  • Pavlovic, Ana Applicability Evidence of Constructal Design in Structural ‎Engineering: Case Study of Biaxial Elasto-Plastic Buckling of ‎Square Steel Plates with Elliptical Cutout [Volume 7, Issue 2, 2021, Pages 922-934]
  • Pavlovic, Ana Thermal Behavior of Monocrystalline Silicon Solar Cells: A ‎Numerical and Experimental Investigation on the Module ‎Encapsulation Materials [Volume 7, Issue 3, 2021, Pages 1847-1855]
  • Pavlovic, Ana Finite Elements Analysis of the Hyperelastic Impeller Rotating in ‎the Self-Priming Pump [Volume 8, Issue 3, 2022, Pages 1103-1112]
  • Pedroso, Lineu A Comparative Analysis of TLCD-Equipped Shear Buildings under Dynamic Loads [Volume 5, Issue 1, 2019, Pages 40-45]
  • Peng, Ke-Cheng Different Groups of Variational Principles for Whitham-Broer-‎Kaup Equations in Shallow Water [Volume 6, Special Issue, 2020, Pages 1178-1183]
  • Peng, Ke-Cheng Variational Principles for Two Compound Nonlinear Equations ‎with Variable Coefficients [Volume 7, Issue 2, 2021, Pages 415-421]
  • Peng, Ke-Cheng Variational Principles and Solitary Wave Solutions of Generalized ‎Nonlinear Schrödinger Equation in the Ocean [Volume 7, Issue 3, 2021, Pages 1639-1648]
  • Peng, Ke-Cheng New Variational Principles for Two Kinds of Nonlinear Partial Differential Equation in Shallow Water [Volume 10, Issue 2, 2024, Pages 406-412]
  • Peplin, Fedor Method of Unsteady Hydrodynamic Characteristics ‎Determination in Turbulent Boundary Layer [Volume 7, Issue 2, 2021, Pages 849-857]
  • Periyadurai, K Impact of Magnetic Field on Convective Flow of a Micropolar Fluid with two Parallel Heat Source [Volume 5, Issue 4, 2019, Pages 652-666]
  • Pescador Tonetto, Cristiane Four Legged Guará Robot: From Inspiration to Implementation [Volume 7, Issue 3, 2021, Pages 1425-1434]
  • Petrov, Andrey Dynamic Response of a Step Loaded Cubic Cavity Embedded in a ‎Partially Saturated Poroelastic Half-space by the Boundary ‎Element Method [Volume 8, Issue 1, 2022, Pages 331-339]
  • Petrova, Tatyana Two-dimensional Stress and strain Analysis for Graphene-‎polymer Nanocomposite under Axial Load [Volume 8, Issue 3, 2022, Pages 1065-1075]
  • Pham, Quoc Hoa Free Vibration Analysis of Functionally Graded Porous Nano-‎plates with Different Shapes Resting on Elastic Foundation [Volume 7, Issue 3, 2021, Pages 1593-1605]
  • Pholdee, Nantiwat Sweep Blade Design for an Axial Wind Turbine using a Surrogate-‎assisted Differential Evolution Algorithm [Volume 9, Issue 1, 2023, Pages 217-225]
  • Phungpaingam, Boonchai Accuracy and Convergence Rate Comparative Investigation on ‎Polytope Smoothed and Scaled Boundary Finite Element [Volume 9, Issue 1, 2023, Pages 226-238]
  • Piana, Gianfranco Long-span Suspension Bridge Flutter Analysis ‎with Drag Force Effects [Volume 7, Special Issue, 2021, Pages 1077-1089]
  • Piccardo, Giuseppe Flexural-Torsional Galloping of Prismatic Structures with Double-Symmetric Cross-Section [Volume 7, Special Issue, 2021, Pages 1049-1069]
  • Piccardo, Giuseppe Editorial [Volume 7, Special Issue, 2021]
  • Pinto, Vinícius Torres Applicability Evidence of Constructal Design in Structural ‎Engineering: Case Study of Biaxial Elasto-Plastic Buckling of ‎Square Steel Plates with Elliptical Cutout [Volume 7, Issue 2, 2021, Pages 922-934]
  • Pinto, Vinícius Torres Multiobjective Geometric Analysis of Stiffened Plates under ‎Bending through Constructal Design Method [Volume 6, Special Issue, 2020, Pages 1438-1449]
  • Piovan, Marcelo Tulio Self-damping of Optical Ground Wire‎ Cables: A Bayesian Approach [Volume 9, Issue 1, 2023, Pages 205-216]
  • Piskunov, Vladimir A. Modeling of Flight of the Line Thrower Projectile [Volume 7, Special Issue, 2021, Pages 1070-1076]
  • Piyaphipat, Suthee Accuracy and Convergence Rate Comparative Investigation on ‎Polytope Smoothed and Scaled Boundary Finite Element [Volume 9, Issue 1, 2023, Pages 226-238]
  • Plevris, Vagelis Investigation of the Static Bending Response of FGM Sandwich Plates [Volume 10, Issue 1, 2024, Pages 26-37]
  • Pnevmatikos, Nikos Pole placement algorithm for control of civil structures subjected to earthquake excitation [Volume 3, Issue 1, 2017, Pages 25-36]
  • Poliakov, Aleksandr Mikhailovich Reducing the Wear of the UHMWPE Used in the Total Hip ‎Replacement after Low-Pressure Plasma Treatment [Volume 8, Issue 3, 2022, Pages 1035-1042]
  • Polyakov, Pavel O. Moment-Inertial Factor as a Criterion for Assessing the ‎Dimension of an Aircraft [Volume 8, Issue 4, 2022, Pages 1307-1314]
  • Ponce de León Puig, Nubia Ilia Predictive Control with Dynamic Hysteresis ‎Reference ‎Trajectory: Application to a Structural Base-‎Isolation ‎Model [Volume 7, Special Issue, 2021, Pages 1242-1251]
  • Pontes, Fabio A. Hybrid Solution for the Analysis of MHD Micropolar Fluid Flow in a Vertical Porous Parallel-Plates Duct [Volume 6, Special Issue, 2020, Pages 1107-1124]
  • Pontes, Péricles C.